[XC][XCurrency] Decentralised Trustless Privacy Platform / Encrypted XChat / Pos

[swannsonite]

Updated to RC3, both RC1 and RC2 users need to upgrade


http://downloads.xc-official.com/testing/XCurrency_2.49_RC3.exe

Updated, Running through Tor 2 active connections so far. 4 250XC transactions +1XC in XMIXER address.

[synechist]

So this just happened:

Zach Chester of ZeroValue, the top-performing trader on eToro,* has XC tipped for a bull run!

http://bit.ly/zachxcprotip







*before he left, that is. Check out his profile.

[cryptico]

Updated to RC3, both RC1 and RC2 users need to upgrade


http://downloads.xc-official.com/testing/XCurrency_2.49_RC3.exe

Updated, Running through Tor 2 active connections so far. 4 250XC transactions +1XC in XMIXER address.

+1xc? I got just 0.003 in three transactions with RC1 maybe thats the update reason lol

Edit : for regular transactions now the fee is Higher 0.00003.. sweet

[synechist]

So this just happened:

Zach Chester of ZeroValue, the top-performing trader on eToro,* has XC tipped for a bull run!

http://bit.ly/zachxcprotip







*before he left, that is. Check out his profile.

Spread this one far and wide folks:

https://twitter.com/XCurrency/status/511919294473846784

[cryptico]

Is the Guy so Important Synech?

[swannsonite]

Updated to RC3, both RC1 and RC2 users need to upgrade


http://downloads.xc-official.com/testing/XCurrency_2.49_RC3.exe

Updated, Running through Tor 2 active connections so far. 4 250XC transactions +1XC in XMIXER address.

+1xc? I got just 0.003 in three transactions with RC1 maybe thats the update reason lol

Edit : for regular transactions now the fee is Higher 0.00003.. sweet

+1XC was for a total of 1001 the same as what ATC is using.
Does anyone know how to check open port over TOR? My normal IP has 32348 open but not sure what would need to be changed for it to be open on the TOR network if even possible.

[buy-black]

I transferred coins to my wallet, downloaded the XCurrency_2.49_RC3.exe, created a shortcut to desktop and added the  -distmix-autonode, started the wallet, unlocked the wallet and ...

Unfortunately my wallet was staking so now the node shows 993 coins plus 9.4 staking.  
Should i do anything or just wait for wallet to stop taking by itself?

[atcsecure]

Updated to RC3, both RC1 and RC2 users need to upgrade


http://downloads.xc-official.com/testing/XCurrency_2.49_RC3.exe

Updated, Running through Tor 2 active connections so far. 4 250XC transactions +1XC in XMIXER address.

+1xc? I got just 0.003 in three transactions with RC1 maybe thats the update reason lol

Edit : for regular transactions now the fee is Higher 0.00003.. sweet

+1XC was for a total of 1001 the same as what ATC is using.
Does anyone know how to check open port over TOR? My normal IP has 32348 open but not sure what would need to be changed for it to be open on the TOR network if even possible.

Running on TOR would require a hidden service be setup and I am still testing this, until testing is completed I would run RC3 on mainnet without TOR

Dan

[Lyricz]

So this just happened:

Zach Chester of ZeroValue, the top-performing trader on eToro,* has XC tipped for a bull run!

http://bit.ly/zachxcprotip







*before he left, that is. Check out his profile.

Spread this one far and wide folks:

https://twitter.com/XCurrency/status/511919294473846784

Very cool, I´m excitedly what this mean for the price

[atcsecure]

I transferred coins to my wallet, downloaded the XCurrency_2.49_RC3.exe, created a shortcut to desktop and added the  -distmix-autonode, started the wallet, unlocked the wallet and ...

Unfortunately my wallet was staking so now the node shows 993 coins plus 9.4 staking.  
Should i do anything or just wait for wallet to stop taking by itself?

you need to wait for the staking to finish, you can disable staking via conf file change [staking=0] or send the coins to the xmixer wallet in chunks of 250XC's (or 200XC's)

Dan

[swannsonite]

Updated to RC3, both RC1 and RC2 users need to upgrade


http://downloads.xc-official.com/testing/XCurrency_2.49_RC3.exe

Updated, Running through Tor 2 active connections so far. 4 250XC transactions +1XC in XMIXER address.

+1xc? I got just 0.003 in three transactions with RC1 maybe thats the update reason lol

Edit : for regular transactions now the fee is Higher 0.00003.. sweet

+1XC was for a total of 1001 the same as what ATC is using.
Does anyone know how to check open port over TOR? My normal IP has 32348 open but not sure what would need to be changed for it to be open on the TOR network if even possible.

Running on TOR would require a hidden service be setup and I am still testing this, until testing is completed I would run RC3 on mainnet without TOR

Dan

Thank you Dan! I have reverted to normal connection.

[wooder]

I transferred coins to my wallet, downloaded the XCurrency_2.49_RC3.exe, created a shortcut to desktop and added the  -distmix-autonode, started the wallet, unlocked the wallet and ...

Unfortunately my wallet was staking so now the node shows 993 coins plus 9.4 staking.  
Should i do anything or just wait for wallet to stop taking by itself?

you need to wait for the staking to finish, you can disable staking via conf file change [staking=0] or send the coins to the xmixer wallet in chunks of 250XC's (or 200XC's)

Dan

why is it best to send the amount in chunks?

[cryptico]

Updated to RC3, both RC1 and RC2 users need to upgrade


http://downloads.xc-official.com/testing/XCurrency_2.49_RC3.exe

Updated, Running through Tor 2 active connections so far. 4 250XC transactions +1XC in XMIXER address.

+1xc? I got just 0.003 in three transactions with RC1 maybe thats the update reason lol

Edit : for regular transactions now the fee is Higher 0.00003.. sweet

+1XC was for a total of 1001 the same as what ATC is using.
Does anyone know how to check open port over TOR? My normal IP has 32348 open but not sure what would need to be changed for it to be open on the TOR network if even possible.

Running on TOR would require a hidden service be setup and I am still testing this, until testing is completed I would run RC3 on mainnet without TOR

Dan

can I do 3 250 and one 251 transaction? doesn't change anything right?

[atcsecure]

I transferred coins to my wallet, downloaded the XCurrency_2.49_RC3.exe, created a shortcut to desktop and added the  -distmix-autonode, started the wallet, unlocked the wallet and ...

Unfortunately my wallet was staking so now the node shows 993 coins plus 9.4 staking.  
Should i do anything or just wait for wallet to stop taking by itself?

you need to wait for the staking to finish, you can disable staking via conf file change [staking=0] or send the coins to the xmixer wallet in chunks of 250XC's (or 200XC's)

Dan

why is it best to send the amount in chunks?

For a few reasons, the primary being is that the funds are used in each transaction, so they need time to confirm, if you have just 1 chunk of 1000XC's, then you need to wait after being in a transaction, however if you split it into chunks of 250 or 200, then only that chunk is unavailable, not the entire amount

[atcsecure]

Updated to RC3, both RC1 and RC2 users need to upgrade


http://downloads.xc-official.com/testing/XCurrency_2.49_RC3.exe

Updated, Running through Tor 2 active connections so far. 4 250XC transactions +1XC in XMIXER address.

+1xc? I got just 0.003 in three transactions with RC1 maybe thats the update reason lol

Edit : for regular transactions now the fee is Higher 0.00003.. sweet

+1XC was for a total of 1001 the same as what ATC is using.
Does anyone know how to check open port over TOR? My normal IP has 32348 open but not sure what would need to be changed for it to be open on the TOR network if even possible.

Running on TOR would require a hidden service be setup and I am still testing this, until testing is completed I would run RC3 on mainnet without TOR

Dan

can I do 3 250 and one 251 transaction? doesn't change anything right?

Yes, you can mix it all up, just keep them above 201 XC's

Dan

[cryptico]

Updated to RC3, both RC1 and RC2 users need to upgrade


http://downloads.xc-official.com/testing/XCurrency_2.49_RC3.exe

Updated, Running through Tor 2 active connections so far. 4 250XC transactions +1XC in XMIXER address.

+1xc? I got just 0.003 in three transactions with RC1 maybe thats the update reason lol

Edit : for regular transactions now the fee is Higher 0.00003.. sweet

+1XC was for a total of 1001 the same as what ATC is using.
Does anyone know how to check open port over TOR? My normal IP has 32348 open but not sure what would need to be changed for it to be open on the TOR network if even possible.

Running on TOR would require a hidden service be setup and I am still testing this, until testing is completed I would run RC3 on mainnet without TOR

Dan

can I do 3 250 and one 251 transaction? doesn't change anything right?

Yes, you can mix it all up, just keep them above 201 XC's

Dan

cool thx

[buy-black]

I transferred coins to my wallet, downloaded the XCurrency_2.49_RC3.exe, created a shortcut to desktop and added the  -distmix-autonode, started the wallet, unlocked the wallet and ...

Unfortunately my wallet was staking so now the node shows 993 coins plus 9.4 staking.  
Should i do anything or just wait for wallet to stop taking by itself?

you need to wait for the staking to finish, you can disable staking via conf file change [staking=0] or send the coins to the xmixer wallet in chunks of 250XC's (or 200XC's)

Dan

First, a big hand to you and thanks for answering my question.  The wallet stopped staking by itself and now I have 13 connections; since I am behind two routers is there a way to check if the node is working properly?  I opened the ports and when I do a port check it shows that it is open but that would only be for the first router, so I am wondering if the connections are getting through both routers.
Thanks again and congratulations.

[holyprofit]

...

Hey Dan - any idea how long to get the update to the OSX wallet out - for us sad-sack OSX-ers.

[atcsecure]

I transferred coins to my wallet, downloaded the XCurrency_2.49_RC3.exe, created a shortcut to desktop and added the  -distmix-autonode, started the wallet, unlocked the wallet and ...

Unfortunately my wallet was staking so now the node shows 993 coins plus 9.4 staking.  
Should i do anything or just wait for wallet to stop taking by itself?

you need to wait for the staking to finish, you can disable staking via conf file change [staking=0] or send the coins to the xmixer wallet in chunks of 250XC's (or 200XC's)

Dan

First, a big hand to you and thanks for answering my question.  The wallet stopped staking by itself and now I have 13 connections; since I am behind two routers is there a way to check if the node is working properly?  I opened the ports and when I do a port check it shows that it is open but that would only be for the first router, so I am wondering if the connections are getting through both routers.
Thanks again and congratulations.

By default the windows wallet supports UNPNP, but i haven't tested behind 2 routers, the router closet to the wallet should have handled the unpnp request


you can always hard-code both NAT mappings on both routers

the external router's nat config should point to the 2nd router's IP address, the 2nd router's nat config points to the wallet ip

[atcsecure]

...

Hey Dan - any idea how long to get the update to the OSX wallet out - for us sad-sack OSX-ers.

By the weekend

Dan