[ANN][GRE] GreenCoin | On Bittrex now!

[ncsupanda]

Pool issues - working on it at the moment. Thanks for the patience.

Won't this require a re-launch again.  Pools think we are on like block 160 but none have been found?  Switched my miners back to another coin, waiting for marching orders.

Feel free to join IRC to discuss. We shouldn't need to relaunch. Pool owners are working on it.

[Nthused]

Pool issues - working on it at the moment. Thanks for the patience.

Won't this require a re-launch again.  Pools think we are on like block 160 but none have been found?  Switched my miners back to another coin, waiting for marching orders.

Feel free to join IRC to discuss. We shouldn't need to relaunch. Pool owners are working on it.

I had multiple Pools up & working (Finding Blocks) for my Coin in a matter of Minutes.

It's either the Coin is FUBAR'd *again or the Pool ops don't know what they are doing.

[IMJim]

Pool issues - working on it at the moment. Thanks for the patience.

Won't this require a re-launch again.  Pools think we are on like block 160 but none have been found?  Switched my miners back to another coin, waiting for marching orders.

Feel free to join IRC to discuss. We shouldn't need to relaunch. Pool owners are working on it.

Ok, stupid question coming..........how do I join the IRC?  Sorry, never used freenode before.

[ncsupanda]

Pool issues - working on it at the moment. Thanks for the patience.

Won't this require a re-launch again.  Pools think we are on like block 160 but none have been found?  Switched my miners back to another coin, waiting for marching orders.

Feel free to join IRC to discuss. We shouldn't need to relaunch. Pool owners are working on it.

Ok, stupid question coming..........how do I join the IRC?  Sorry, never used freenode before.

Go to webchat.freenode.net, channel is #greencoin

[ncsupanda]

Pool issues - working on it at the moment. Thanks for the patience.

Won't this require a re-launch again.  Pools think we are on like block 160 but none have been found?  Switched my miners back to another coin, waiting for marching orders.

Feel free to join IRC to discuss. We shouldn't need to relaunch. Pool owners are working on it.

I had multiple Pools up & working (Finding Blocks) for my Coin in a matter of Minutes.

It's either the Coin is FUBAR'd *again or the Pool ops don't know what they are doing.

It's an implementation - because the coins payment is different than a normal coin, it requires a special stratum. It's brought to everyone's attention and is being taken care of.

[Freenhult]

I'm solomining it just fine. I don't think it needs a relaunch since its working as intended. I think its screwy that people dove straight into pools for a coin that literally has a 1kb blockchain though.

[biodieselchris]

I'm solomining it just fine. I don't think it needs a relaunch since its working as intended. I think its screwy that people dove straight into pools for a coin that literally has a 1kb blockchain though.

how many coins do you have after 46 minutes?

[coinfusion]

I'm solomining it just fine. I don't think it needs a relaunch since its working as intended. I think its screwy that people dove straight into pools for a coin that literally has a 1kb blockchain though.

I don't think you can solomine with rental rigs unless you also setup a stratum server, might be why. Nowadays there's an overwhelming blast of rented hashrate right from the start -- usually useless to solo after the first few blocks.

[IMJim]

Still have never tried to solomine before.......not sure if I even can with my Gridseeds.  Been meaning to figure this solo mining stuff out, just have not had time yet.

[prdomain]

I downloaded greencoin.zip in root directory of
https://github.com/greencoindev/greencoin

It is not sync.

[ncsupanda]

I downloaded greencoin.zip in root directory of
https://github.com/greencoindev/greencoin

It is not sync.

Did you add a coin.conf?

Edit: Ah, that zip file isn't correct. Removing.

[CryptoBlox]

CryptoBlox
www.CryptoBlox.com

CryptoBlox is happy to announce the addition of the following GreenCoin Services!  

GreenCoin Block Explorer is up and running!
http://explorer.cryptoblox.com/chain/GreenCoin

Greencoin Faucet - Currently dry and needs some donations to start dripping!
http://www.cryptoblox.com/faucets/GreenCoin/



Cheers,
CryptoBlox

[Freenhult]

I'm solomining it just fine. I don't think it needs a relaunch since its working as intended. I think its screwy that people dove straight into pools for a coin that literally has a 1kb blockchain though.

how many coins do you have after 46 minutes?

I have 127,000 right now confirmed.

[IMJim]

Does anyone know if it is possible to solomine with GridSeeds using Raspberry PI controllers?

[Freenhult]

Does anyone know if it is possible to solomine with GridSeeds using Raspberry PI controllers?

Yes, I'm using one right now.

Set the wallet up on your computer desktop that is not connected with the Pi. Go into the coin.conf file in the wallet and set the rcpipallow to your rasp Pi IP. It should also say 127.0.0.1 which is your desktop.

Also make sure the conf says server=1; then load the wallet and let it sync.

Once its synched up do set the address as http://YOURDESKTOPIP:portinCoin.conf
Username
Password

and set the gridseed to run at 800 unless its speced for higher.

I have a Zoomhash brand Gridseed Asic

[IMJim]

Does anyone know if it is possible to solomine with GridSeeds using Raspberry PI controllers?

Yes, I'm using one right now.

Set the wallet up on your computer desktop that is not connected with the Pi. Go into the coin.conf file in the wallet and set the rcpipallow to your rasp Pi IP. It should also say 127.0.0.1 which is your desktop.

Also make sure the conf says server=1; then load the wallet and let it sync.

Once its synched up do set the address as http://YOURDESKTOPIP:portinCoin.conf
Username
Password

and set the gridseed to run at 800 unless its speced for higher.

I have a Zoomhash brand Gridseed Asic

Hey, thanks bud!!  Will give this a try and see if I can learn something new here:-)  I recently got 160 5 chip GridSeeds and have been running the Hashra Controlla to control them...will be cool if I can get this solo mining working!

Thanks gain...much appreciated!

[Freenhult]

How much Hash does that translate out too?

Does anyone know if it is possible to solomine with GridSeeds using Raspberry PI controllers?

Yes, I'm using one right now.

Set the wallet up on your computer desktop that is not connected with the Pi. Go into the coin.conf file in the wallet and set the rcpipallow to your rasp Pi IP. It should also say 127.0.0.1 which is your desktop.

Also make sure the conf says server=1; then load the wallet and let it sync.

Once its synched up do set the address as http://YOURDESKTOPIP:portinCoin.conf
Username
Password

and set the gridseed to run at 800 unless its speced for higher.

I have a Zoomhash brand Gridseed Asic

Hey, thanks bud!!  Will give this a try and see if I can learn something new here:-)  I recently got 160 5 chip GridSeeds and have been running the Hashra Controlla to control them...will be cool if I can get this solo mining working!

Thanks gain...much appreciated!

[IMJim]

About 50 mh/s

[IMJim]

No luck so far.......does this look correct for my config?  Not sure on the rpcallwip line if I have that right.

rpcuser=username
rpcpassword=password
rpcallowip=127.0.0.1,192.168.1.122
rpcport=21036
server=1
daemon=1
listen=1
addnode=107.178.113.62

[ncsupanda]

No luck so far.......does this look correct for my config?  Not sure on the rpcallwip line if I have that right.

rpcuser=username
rpcpassword=password
rpcallowip=127.0.0.1,192.168.1.122
rpcport=21036
server=1
daemon=1
listen=1
addnode=107.178.113.62

rpcallowip should just be 127.0.0.1 (or localhost)