what exactly are these settings.
-l, --launch=CONFIG launch config for the Cryptonight kernel.
a comma separated list of values in form of
AxB where A is the number of threads to run in
each thread block and B is the number of thread
blocks to launch. If less values than devices in use
are provided, the last value will be used for
the remaining devices. If you don't need to vary the
value between devices, you can just enter a single
value and it will be used for all devices.
-f, --diff Divide difficulty by this factor (std is 1)
I am running an nVIDIA gtx 980
looking at the -l I set mine to 8x64 - I need to set the B value to a whole number divisible by 16 (smx count of 16 for this card)
I have tried 8x128 and I get larger +520h/s but very inconsistent... it will jump all over one will be 540 the next will be 128 ... average it out over a length of time and I would get approx 300+h/s average over 12 hours.
I have tried other combos all with a B value divisible by 16. and 8x64 gives me about 430h/s average over 12 hours.
What is the -f for exactly i leave it alone for lack of knowing what the point of this setting is.
Here is why I ask.. If I run
https://bitcointalk.org/index.php?topic=770064.0 and mine X11 algo for Dash.. I get approx 12,000 kh/s average. (setting intensity to 21 and maxing my GPU to approx 1550MHz ) - my GPU Temp Climbs up and I have it holding at 80°C
When I run Cryptonight Algo for XMR on tsiv ccminer I am getting a fair h/s (430 avg) but it does not seem like my GPU is really working that hard..
It does not seem to help or hinder it to overclock the GPU also my temperature never even gets above 55°C - Fans hardly run at all
what am I doing wrong with my settings.. ( besides trying to mine Monero in the first place)