Turbo2
Newbie
Offline
Activity: 63
Merit: 0
|
|
September 25, 2016, 06:10:13 PM |
|
I think you are referring to the "bfactor" flag which by default is set to 8x40 according to that documentation but that actually no impact on % of GPU utilization.
I tried setting it higher (8x64) and lower (6x32) and it had NO impact on GPU usage %, it would always be consistent at 95-98% usage. To prevent overall lag/delay, I think the maximum GPU usage can't exceed 80%.
|
|
|
|
myagui
Legendary
Offline
Activity: 1154
Merit: 1001
|
|
September 25, 2016, 07:50:44 PM |
|
I think you are referring to the "bfactor" flag which by default is set to 8x40 according to that documentation but that actually no impact on % of GPU utilization.
I tried setting it higher (8x64) and lower (6x32) and it had NO impact on GPU usage %, it would always be consistent at 95-98% usage. To prevent overall lag/delay, I think the maximum GPU usage can't exceed 80%.
It's -l (lower case L). And you really need much lower values if you want to get rid of lag. I don't recall anymore what a 750 TI would use, but maybe try -l 8x20, 8x10, 4x40, 4x30, 4x20 or 4x10, Eventually, you'll hit a number that effectively lowers the GPU usage to the desired levels.
|
|
|
|
Turbo2
Newbie
Offline
Activity: 63
Merit: 0
|
|
September 25, 2016, 08:06:41 PM |
|
Thanks for the suggestion, but I tried even the lowest value (4x10) and it doesn't work properly. It also lowered my H/s from ~220 straight down to ~60, yet GPU usage funny enough was still at 93-96%; http://imgur.com/a/cyW1aI think you are referring to the "bfactor" flag which by default is set to 8x40 according to that documentation but that actually no impact on % of GPU utilization.
I tried setting it higher (8x64) and lower (6x32) and it had NO impact on GPU usage %, it would always be consistent at 95-98% usage. To prevent overall lag/delay, I think the maximum GPU usage can't exceed 80%.
It's -l (lower case L). And you really need much lower values if you want to get rid of lag. I don't recall anymore what a 750 TI would use, but maybe try -l 8x20, 8x10, 4x40, 4x30, 4x20 or 4x10, Eventually, you'll hit a number that effectively lowers the GPU usage to the desired levels.
|
|
|
|
myagui
Legendary
Offline
Activity: 1154
Merit: 1001
|
|
September 25, 2016, 08:11:30 PM |
|
My final suggestion would be 4x5, 3x5, 2x5, 1x5. These are the smallest units while still matching your SMX count. Sorry, don't have these GPUs anymore to test anything out here...
|
|
|
|
Turbo2
Newbie
Offline
Activity: 63
Merit: 0
|
|
September 25, 2016, 08:31:52 PM |
|
Thanks anyway myagui, but those numbers don't work for some strange reason....I guess if you enter an impossible combination it just defaults back to 8x40? Because that is exactly what is happening with those numbers (or anything lower than 4x10 for that matter) and I get ~220 H/s again with 99% usage. My final suggestion would be 4x5, 3x5, 2x5, 1x5. These are the smallest units while still matching your SMX count. Sorry, don't have these GPUs anymore to test anything out here...
|
|
|
|
QuintLeo
Legendary
Offline
Activity: 1498
Merit: 1030
|
|
September 25, 2016, 10:45:21 PM |
|
they have to match the 5 SMX units for the 750ti
1x5, 2x10, etc.
Otherwise that parameter gets ignored.
|
I'm no longer legendary just in my own mind! Like something I said? Donations gratefully accepted. LYLnTKvLefz9izJFUvEGQEZzSkz34b3N6U (Litecoin) 1GYbjMTPdCuV7dci3iCUiaRrcNuaiQrVYY (Bitcoin)
|
|
|
Turbo2
Newbie
Offline
Activity: 63
Merit: 0
|
|
September 25, 2016, 11:16:07 PM |
|
Unfortunately it is ignoring 1x5 and 2x10 as well, defaulting back to 8x40 (and 99% usage) they have to match the 5 SMX units for the 750ti
1x5, 2x10, etc.
Otherwise that parameter gets ignored.
|
|
|
|
QuintLeo
Legendary
Offline
Activity: 1498
Merit: 1030
|
|
September 26, 2016, 06:20:30 AM |
|
post your command line, something isn't right
|
I'm no longer legendary just in my own mind! Like something I said? Donations gratefully accepted. LYLnTKvLefz9izJFUvEGQEZzSkz34b3N6U (Litecoin) 1GYbjMTPdCuV7dci3iCUiaRrcNuaiQrVYY (Bitcoin)
|
|
|
Turbo2
Newbie
Offline
Activity: 63
Merit: 0
|
|
September 26, 2016, 02:14:19 PM |
|
Hey, it was a very simple "mining.bat" with the following contents; ccminer -o stratum+tcp://xmr.crypto-pool.fr:3333 -u myaddress -p x -l 4x10 Anything below 4x10 would cause ccminer to revert back to the default 8x40 value. post your command line, something isn't right
|
|
|
|
QuintLeo
Legendary
Offline
Activity: 1498
Merit: 1030
|
|
September 27, 2016, 01:28:59 AM |
|
Hey, it was a very simple "mining.bat" with the following contents; ccminer -o stratum+tcp://xmr.crypto-pool.fr:3333 -u myaddress -p x -l 4x10 Anything below 4x10 would cause ccminer to revert back to the default 8x40 value. post your command line, something isn't right
-l=4x20 or 3x15 etc. that equal sign matters.
|
I'm no longer legendary just in my own mind! Like something I said? Donations gratefully accepted. LYLnTKvLefz9izJFUvEGQEZzSkz34b3N6U (Litecoin) 1GYbjMTPdCuV7dci3iCUiaRrcNuaiQrVYY (Bitcoin)
|
|
|
GingerAle
Legendary
Offline
Activity: 1260
Merit: 1008
|
|
November 15, 2016, 12:33:27 PM |
|
Because monero is hard to mine. A 750 to only gets 250 h/s. A Rx 470 stock gets 550.
|
|
|
|
B.z.
Newbie
Offline
Activity: 1
Merit: 0
|
|
November 19, 2016, 04:19:01 AM |
|
hey guys, i always encountered stratum connection interrupted, and does not receive any yay!! IM using nvidia gtx 780 and my hashrate is 0.3GH/s for mining monero
|
|
|
|
GKar
|
|
December 18, 2016, 11:36:31 PM Last edit: December 19, 2016, 03:19:19 PM by GKar |
|
I'm having some problems with the windows miner. Mining on coolpool and I keep getting stratum connection lost. I get 1 hash of 103 h/s before it drops. I've set the retry to 3 seconds but it does not seem to be registering my hash on the pool after 2 hrs of running.
any suggestions on how to not get the stratum drops?
Thanks
edit: cmd line cminer --url=stratum+tcp://xmr.coolpool.io:7777--user=wallet address --pass=x -R 2
I get 1 hash round and then it drops ~20 sec later.
|
|
|
|
hooldus
Newbie
Offline
Activity: 58
Merit: 0
|
|
March 17, 2017, 09:26:38 AM |
|
Hello Can someone explain me this: I install Cuda hashes goes up to 40k+ but before that it's all only 60h/s or so... But if I close program it will be starting with 60h/s ... it won't stay on 40k+ is it possible to start ccminer throught cuda to stay higher hashes? Also If it stays on 40 000h/s it won't accept any hashes. https://i.stack.imgur.com/yCPkz.png
|
|
|
|
chrysophylax
Legendary
Offline
Activity: 2870
Merit: 1091
--- ChainWorks Industries ---
|
|
April 05, 2017, 07:40:48 AM |
|
hi all ...
anyone seen tsiv around? ...
#crysx
|
|
|
|
sharpblade95
Newbie
Offline
Activity: 1
Merit: 0
|
|
June 30, 2017, 10:36:48 AM |
|
hey! does anybody knows whats happening here?
" ccminer -o stratum+tcp://monerohash.com:3333 -u YOUR_WALLET_ADDRESS -p x "
JSON-RPC call failed: { "message": "invalid method", "code": -1 } [2017-06-30 15:06:23] ...retry after 30 seconds
|
|
|
|
Zellko
Newbie
Offline
Activity: 23
Merit: 0
|
|
July 01, 2017, 08:51:06 PM |
|
Hi everyone, I wanted to start mining BitAsean on this pool: http://128.199.168.3/#getting_started with my 3 Nvidia GPU (2x GTX1050ti, 1x GTX 1060). As suggested in the getting started I downloaded the last version of ccminer (tsiv). When i start my .bat I have the following error: ----------------------------------------------------------------- [2017-07-01 22:26:17] Using JSON-RPC 2.0 [2017-07-01 22:26:17] 3 miner threads started, using 'cryptonight' algorithm. [2017-07-01 22:26:17] Starting Stratum on stratum+tcp://128.199.168.3:3333 [2017-07-01 22:26:17] Binding thread 2 to cpu 2 [2017-07-01 22:26:17] Binding thread 0 to cpu 0 [2017-07-01 22:26:17] Binding thread 1 to cpu 1 [2017-07-01 22:26:17] GPU #2: GeForce GTX 1050 Ti (6 SMX), using 40 blocks of 8 threads [2017-07-01 22:26:17] GPU #0: GeForce GTX 1060 6GB (10 SMX), using 40 blocks of 8 threads [2017-07-01 22:26:17] GPU #1: GeForce GTX 1050 Ti (6 SMX), using 40 blocks of 8 threads [2017-07-01 22:26:17] GPU #1: Warning: block count 40 is not a multiple of SMX count 6. [2017-07-01 22:26:17] GPU #2: Warning: block count 40 is not a multiple of SMX count 6. [2017-07-01 22:26:18] Pool set diff to 10000 [2017-07-01 22:26:18] Stratum detected new block [2017-07-01 22:26:19] GPU #0: FATAL: failed to allocate device memory for long state
C:\Users\Rig\Desktop\ccminer cryptonight>pause Appuyez sur une touche pour continuer... My .bat: ccminer -o stratum+tcp://128.199.168.3:3333 -u MyBitAseanAdress -p x pause Does somebody know how to fix it ? It's is possible to mine BAS with my GPU ? Thanks in advance for your help Smiley
|
|
|
|
mrblas
Newbie
Offline
Activity: 1
Merit: 0
|
|
July 14, 2017, 07:55:48 PM |
|
C:\Users\Gamer\Downloads\moreno>ccminer -o stratum+tcp://xmr.crypto-pool.fr:8888 -u 43ZGTuDknmxBiBFA19GiaMjD2rfFVtZzZRtiQ76grRQBSTt3bdPJ9YpZTup88njcom9ZEybSobjra26 rYwgHquXHRg -p x *** ccminer 2.0 for nVidia GPUs by tpruvot@github *** [2017-07-14 15:57:36] Starting on stratum+tcp://xmr.crypto-pool.fr:8888 [2017-07-14 15:57:36] NVML GPU monitoring enabled. [2017-07-14 15:57:36] NVAPI GPU monitoring enabled. [2017-07-14 15:57:36] 1 miner thread started, using 'auto' algorithm. [2017-07-14 15:57:38] Failed to get extranonce1 [2017-07-14 15:57:38] Failed to get extranonce1 [2017-07-14 15:57:38] ...retry after 30 seconds Does anyone know how to correct this error Gtx 1060
|
|
|
|
nemesis88
Newbie
Offline
Activity: 7
Merit: 0
|
|
July 17, 2017, 07:47:22 PM |
|
Hi guys! I downloaded the .bat from Minergate, put it in the same folder of ccminer, but when I run the bat shows: - "'ccminer' is not recongnized as an internal or external command, operable program or batch file."
Win7, Intel Core2 Duo E7500, with an antminer (that I don't know how to make it works). This recognition problem is happening with other miners too. Already google it and find some answers, but none worked for me still. Does anyone know what it can be? Here's the bat file I'm using: - ccminer -a cryptonight -o stratum+tcp://bcn.pool.minergate.com:45550 -u user -p x
pause
Tx!
|
|
|
|
cyrilweb
Newbie
Offline
Activity: 1
Merit: 0
|
|
July 25, 2017, 06:12:39 AM |
|
[2017-07-01 22:26:19] GPU #0: FATAL: failed to allocate device memory for long state
Does somebody know how to fix it ? It's is possible to mine BAS with my GPU ? Thanks in advance for your help I have the same problem wit last "GeForce Game Ready Driver" & GTX970. Impossible to mine with version 384.76 (29 june 2017) & 384.94 (24 july 2017). I have downgraded to version 382.53 (9 june 2017) and it works well Follow this link to find the old official Geforce drivers : https://www.geforce.com/drivers/beta-legacy
|
|
|
|
|