Nexus - Pure SHA3 + CPU/GPU + nPoS + 15 Active Innovations + More to Come

[merc84]

Nothing really other than drivers I think i had best results with 15.7 here's a link to the dll's if u need it. https://www.dropbox.com/s/e70ctq2m8bm9cjo/15.7cl.rar?dl=0

[dbt1033]

Nothing really other than drivers I think i had best results with 15.7 here's a link to the dll's if u need it. https://www.dropbox.com/s/e70ctq2m8bm9cjo/15.7cl.rar?dl=0

They Windows 10 compatible?

[calem]

I would increase your gpu-engine.  Mem-clock doesn't matter too much with this hashing algo.  Underclocking memory might actually help with heat.

You may also want to set gpu-powertune if you increase the engine.

Cheers for the advice! I'll give it a go.

Nothing really other than drivers I think i had best results with 15.7 here's a link to the dll's if u need it. https://www.dropbox.com/s/e70ctq2m8bm9cjo/15.7cl.rar?dl=0

Hopefully these might be win 10 compatible.

Cheers!

[calem]

Early reports.

The drivers didn't crash the system but on their own didn't increase performance

Quartered the defualt mem-clock and increased gpu-enigine to 1000 and this got me up to 16.5 +-0.1

I'll keep tinkering.

[calem]

So after crashing the computer multitudes of times I'm still not able to stablise higher 16.4MH/s

I would go through listing all the combinations but it would be a flood of text.

If anyone can throw me some proven drivers for win 10 or conf settings for a 270oc 2gb on the S/K algo. I'll give it a shot.

Short and tall, I'm happy with I have achieved and there was 0 skill or luck involved.

I'm keeping mem-clock @ 350 and intensity @ 21 with engine and shaders @ the cards stock clock. This gives me 16.1 +-0.1 with a kinder heat/load on the gpu.

Cheers for everyones help!

[forzendiablo]

this coin is strange but i like it

[AliMan]

this coin is strange but i like it

Strange how?

[calem]

Strange how?

Maybe because of it's closed source?

[merc84]

this coin is strange but i like it

Strange how?

Strange that it isn't worth more? 

[calem]

Just preemptively asking before I swap out the cards...
So I have the x64 win build of the cuda skminer... Lookin at a few bits and pieces trying to jolt my memory but I'm not sure if theres any parameters to set in the batch launch file :/ Am I mistaken?

edit

My question is this. What flags can I use in the .bat? I know I wedge em in the following line where "x" "etc" and "derp" is where I assume flags go..

Code:

skminer.exe -X -etc -derp 127.0.0.1  9325

[Conqueror]

Just preemptively asking before I swap out the cards...
So I have the x64 win build of the cuda skminer... Lookin at a few bits and pieces trying to jolt my memory but I'm not sure if theres any parameters to set in the batch launch file :/ Am I mistaken?

edit

My question is this. What flags can I use in the .bat? I know I wedge em in the following line where "x" "etc" and "derp" is where I assume flags go..

Code:

skminer.exe -X -etc -derp 127.0.0.1  9325

Hey man, how many coins are you mining per day with your setup?

[calem]

Hey man, how many coins are you mining per day with your setup?

With the single  R9 270oc 2gb I mined about 500 over 5 days roughly. Some days were better then others.

Looks like I can't get the 780ti running due a compute compatibility issue.. Gonna make a post in a bit detailing the issue and whether or not theres a way around this cause so far from what i can tell, I'm up a nasty creek without a paddle. (Theres nothing I can do to get windows mining via CUDA on the 700 series or above)

Code:

[MASTER]  Failed to Update Hight

UPDATE

I was supposed to unlock the wallet for staking AND mining!

I'm an idiot xD Don't worry peoples it's all good!

[calem]

Ok, so from what I can see... There's no tweaking to be done with the CUDA skminer

I'll screen cap and report soon. Bouncing heavily between what I assume is on average 64MH/s.

Ok so what's happening is this. It takes about a max of 5 seconds for the card to wind up to it's stable rate of ~64MH/s +-1MH/s.

If a block is discovered before that 5 second period, the first couple of lines can show anything between 0 and about 40.

Running on the latest drivers and cuda toolkit via "GV-N78TOC-3GD" (Gigabyte GTX 780ti 3GB OC edition) - http://www.gigabyte.com.au/products/product-page.aspx?pid=4839#ov

The GPU load is only 6% so once theres an optimised CUDA miner, we should see some AMAZING rates coming from these cards.

[starblocks]

[AliMan]

Ok, so from what I can see... There's no tweaking to be done with the CUDA skminer

I'll screen cap and report soon. Bouncing heavily between what I assume is on average 64MH/s.

Ok so what's happening is this. It takes about a max of 5 seconds for the card to wind up to it's stable rate of ~64MH/s +-1MH/s.

If a block is discovered before that 5 second period, the first couple of lines can show anything between 0 and about 40.

Running on the latest drivers and cuda toolkit via "GV-N78TOC-3GD" (Gigabyte GTX 780ti 3GB OC edition) - http://www.gigabyte.com.au/products/product-page.aspx?pid=4839#ov

The GPU load is only 6% so once theres an optimised CUDA miner, we should see some AMAZING rates coming from these cards.

Why not just use the already provided miners?

[merc84]

Ok, so from what I can see... There's no tweaking to be done with the CUDA skminer

I'll screen cap and report soon. Bouncing heavily between what I assume is on average 64MH/s.

Ok so what's happening is this. It takes about a max of 5 seconds for the card to wind up to it's stable rate of ~64MH/s +-1MH/s.

If a block is discovered before that 5 second period, the first couple of lines can show anything between 0 and about 40.

Running on the latest drivers and cuda toolkit via "GV-N78TOC-3GD" (Gigabyte GTX 780ti 3GB OC edition) - http://www.gigabyte.com.au/products/product-page.aspx?pid=4839#ov

The GPU load is only 6% so once theres an optimised CUDA miner, we should see some AMAZING rates coming from these cards.

Are u sure its not 6.4 Mh/s struggle to see 64Mh/s with only 6% useage.

[calem]

Are u sure its not 6.4 Mh/s struggle to see 64Mh/s with only 6% useage.

Maybe your right.. I'll take a screen cap later. Just got up.

[Conqueror]

My wallet is showing only 3 connections to network, is it normal?
Do I need to add any nodes?

[merc84]

My wallet is showing only 3 connections to network, is it normal?
Do I need to add any nodes?

I have this issue from time to time, you can delete ur addr.dat and usually that will fix the issue.

[Conqueror]

My wallet is showing only 3 connections to network, is it normal?
Do I need to add any nodes?

I have this issue from time to time, you can delete ur addr.dat and usually that will fix the issue.

It helped, but perhaps this issue should be put on developers to do list...