[Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners

[Datweh]

d6d6422223aadc8227e4e3fc5bf09f945556ba712a515c185c19e1e1f316c780

If only….

[MrNewbie]

Hello Patrike,

Just stopped in to say hello to everyone and ask 1 question.

1st off, I really like your Awesome miner software, It really is Awesome! After 3-4 years of HiveOS, you have a new convert, me.



Question- Outside Temperature

Temperature, I searched and saw many of posts on GPU/ASIC temperatures.

On the dashboard there is a feature for Outside Temperature but I could not find any way to set up any API links or URL's.

How do you set that up, just thought it would be convenient? not a big deal.

[patrike]

Hello Patrike,

Just stopped in to say hello to everyone and ask 1 question.

1st off, I really like your Awesome miner software, It really is Awesome! After 3-4 years of HiveOS, you have a new convert, me.



Question- Outside Temperature

Temperature, I searched and saw many of posts on GPU/ASIC temperatures.

On the dashboard there is a feature for Outside Temperature but I could not find any way to set up any API links or URL's.

How do you set that up, just thought it would be convenient? not a big deal.

Thanks for your feedback and question.

Please go to the Awesome Miner Options dialog, Dashboard & History section. You can configure the outside temperature here, by entering your latitude and longitude.

[MrNewbie]

Thanks,

I thought I looked over every single menu, But I missed that one.

It reports in Celsius is there any way to toggle to display in Fahrenheit

[patrike]

Thanks,

I thought I looked over every single menu, But I missed that one.

It reports in Celsius is there any way to toggle to display in Fahrenheit

Today we only support temperature display in Celsius. The reason is that Celsius is being used by all ASIC miners and GPU mining software. However, I agree that the outside temperature may be easier to relate to in F so we might make this configurable in the future.


Awesome Miner version 9.12.5

 ASIC mining
  - DesiweMiner supported with reboot and default pools
  - Antminer T21 and E9 Pro supported
  - IceRiver integration improved
 Mining software
  - BzMiner 19.3.1
  - Lolminer 1.84
  - OneZeroMiner 1.3.0
  - SrbMiner-Multi 2.4.7
  - TeamRedMiner 0.10.18
 Corrections
  - Correction to hash rate display for iPollo G1
  - Correction to reading MAC address from Antminer L7 running the Awesome Miner firmware

[moderator's note: consecutive posts merged]

[joseph32]

Hi Patrik,

can you add please:

Pyrin (PYI)
and Nicehash Karlsen (KLS)

Thanks

[joseph32]

Hi again Patrik

I have some Win 11 Pro Rigs and on all of them the overclocking system doesn't work anymore after the new Win-Update.

All hosts are connected, the "Test connection" works. AM can read all stats without any problem.
But AM won't execute any Clocking Profile inside the Managed Miner Properties. If I try to manually set any clocks in the "GPU overclocking" tab, it says "Failed to update the following hosts: xyz". If I click again on apply, AM doesn't print the error again. It just looks like the new overclocks are set, but they aren't.
I have no firewall or anything else set.

In order to check, I have copied over an older version of the 9.10.8 Remote Agent, but the problem remains.
Then I switched to an older Win 11 backup from last month. And everything works fine as usually.

Because I also updated AM from an older version to the newest 9.12.5, I really can't tell if it's a problem of the newest AM version, or just Windows 11. But the backup works, even with the newest AM version, so I think its something in Windows. No Windows 10 rig seems affected right now, only Win 11.

The systembuilds:

Doesn't work            Windows 11 Pro, 23H2 22631.3235
Backup which works   Windows 11 Pro, 23H2 22631.3155

Can you please check that?

[patrike]

Hi Patrik,

can you add please:

Pyrin (PYI)
and Nicehash Karlsen (KLS)

Thanks

Thanks for the feedback. I've pushed an update for this and your Awesome Miner should pick it up during the day.

Hi again Patrik

I have some Win 11 Pro Rigs and on all of them the overclocking system doesn't work anymore after the new Win-Update.

All hosts are connected, the "Test connection" works. AM can read all stats without any problem.
But AM won't execute any Clocking Profile inside the Managed Miner Properties. If I try to manually set any clocks in the "GPU overclocking" tab, it says "Failed to update the following hosts: xyz". If I click again on apply, AM doesn't print the error again. It just looks like the new overclocks are set, but they aren't.
I have no firewall or anything else set.

In order to check, I have copied over an older version of the 9.10.8 Remote Agent, but the problem remains.
Then I switched to an older Win 11 backup from last month. And everything works fine as usually.

Because I also updated AM from an older version to the newest 9.12.5, I really can't tell if it's a problem of the newest AM version, or just Windows 11. But the backup works, even with the newest AM version, so I think its something in Windows. No Windows 10 rig seems affected right now, only Win 11.

The systembuilds:

Doesn't work            Windows 11 Pro, 23H2 22631.3235
Backup which works   Windows 11 Pro, 23H2 22631.3155

Can you please check that?

Thanks for your report - I will investigate.
Can you please open services.msc and check if "IntelliBreeze Maintenance Service" is running correctly?

[moderator's note: consecutive posts merged]

[joseph32]

Hi Patrik,

thanks for the quick response.

This seems to be the reason. That service isn't running, not even in the service-list anymore. Checked all Win 11 Pro.
Older patches are not affected, that service is running and in the list, Win 10 isn't affected too. Just the newest Win 11 updates.

Best regards

[patrike]

Hi Patrik,

thanks for the quick response.

This seems to be the reason. That service isn't running, not even in the service-list anymore. Checked all Win 11 Pro.
Older patches are not affected, that service is running and in the list, Win 10 isn't affected too. Just the newest Win 11 updates.

Best regards

Hello,

I've been trying with a number of Windows versions now, including these two that you listed:
- Windows 11 Pro 23H2, 22631.3155
- Windows 11 Pro 23H2, 22631.3235

In my case I do see IntelliBreeze Maintenance Service installed and running after I install either Awesome Miner or Remote Agent. So unfortunately the issue is a bit more complex than just related to a specific Windows 11 build number.

I assume you already tried with rebooting. Can you please also verify that you have the latest Windows Defender definitions?

Do you get the same problem no matter if you install Awesome Miner or Remote Agent - that this service isn't installed correctly?

[freeconcallcom]

Nice service. Using it for a long time.

[joseph32]

Hi Patrik,

thanks for the quick response.

This seems to be the reason. That service isn't running, not even in the service-list anymore. Checked all Win 11 Pro.
Older patches are not affected, that service is running and in the list, Win 10 isn't affected too. Just the newest Win 11 updates.

Best regards

Hello,

I've been trying with a number of Windows versions now, including these two that you listed:
- Windows 11 Pro 23H2, 22631.3155
- Windows 11 Pro 23H2, 22631.3235

In my case I do see IntelliBreeze Maintenance Service installed and running after I install either Awesome Miner or Remote Agent. So unfortunately the issue is a bit more complex than just related to a specific Windows 11 build number.

I assume you already tried with rebooting. Can you please also verify that you have the latest Windows Defender definitions?

Do you get the same problem no matter if you install Awesome Miner or Remote Agent - that this service isn't installed correctly?

Hi Patrik,

I just reinstalled the Remote Agent. Clicked the "Repair" function and it reenabled the IntelliBreeze service.

But yes, I rebooted all machines. On that rigs I don't have defender running. But windows update downloaded all files. So I really dunno why windows kicked out your service. But if a quick reinstall helps, thats fine. Maybe try to include this reinstall-step into your guide somewhere

So, its fixed for now. Thanks for your quick response!

[MrNewbie]

A Question about Terminal windows.

Often, I stop mining on the awesome miner dashboard then open a terminal window and run some other task for a few hrs.
But, then I have to come back in a few and restart the miner.

Is there some command to do it from terminal? Not very good with Linux.

such as 

cd awesomeminer-remoteagent ; service-start.sh
Which reports active


Thanks, Brian

[patrike]

A Question about Terminal windows.

Often, I stop mining on the awesome miner dashboard then open a terminal window and run some other task for a few hrs.
But, then I have to come back in a few and restart the miner.

Is there some command to do it from terminal? Not very good with Linux.

such as 

cd awesomeminer-remoteagent ; service-start.sh
Which reports active

Thanks, Brian

Hello and thanks for your question.

The idea is to use the Awesome Miner main application (or web interface) to start and stop the mining. We don't provide any Linux commands for doing this.

[toptek12]

I don't know if it's awesome miner or XMRig Cpu miner 621.2 the latest version i had to set it back to 621.1 with 621.2 loaded as the miner it's not showing hash rate,temps etc it's stays at zero so i set it back to 621.1 and everything works great.  
Just a heads up I can use 621.1 and it all works fine.

[patrike]

I don't know if it's awesome miner or XMRig Cpu miner 621.2 the latest version i had to set it back to 621.1 with 621.2 loaded as the miner it's not showing hash rate,temps etc it's stays at zero so i set it back to 621.1 and everything works great.  
Just a heads up I can use 621.1 and it all works fine.

It turns out that the API response from XMRig 6.21.2 is broken/incomplete and not possible to parse. I've reverted back to 6.21.1 in the latest software definitions.

[mikeywith]

Hello Patrike, I would like to request a new feature or if already available please let me know how to aquire it,  Whatsminer readable API returns environment temperature labeled as "Env Temp", i need away to read that in the rules conditions to execute some actions based on that. Looking forward to your response.

Thank you for the great service, been happily using AM for years.

[patrike]

Hello Patrike, I would like to request a new feature or if already available please let me know how to aquire it,  Whatsminer readable API returns environment temperature labeled as "Env Temp", i need away to read that in the rules conditions to execute some actions based on that. Looking forward to your response.

Thank you for the great service, been happily using AM for years.

Hello and thanks for your nice feedback.

This is a quick thing to add so I will make sure to do that in the near future.

[joseph32]

Hi Patrik,

TeamRedMiner added ALEPHIUM. Can you add it please to the Dual Mode? Thanks!

[patrike]

Hi Patrik,

TeamRedMiner added ALEPHIUM. Can you add it please to the Dual Mode? Thanks!

Hello! There is a new software definition update for this now.