nordmann666
Member
Offline
Activity: 361
Merit: 16
|
|
August 29, 2023, 12:29:17 PM |
|
killer feature!!! are you using vnish devfee pool or own? - Install the Awesome Miner Antminer S19/L7 firmware to Antminers without the need of SD cards. - Automatic unlocking to allow installing directly on the Antminer.
We have a partnership with the Vnish team to provide you with the Awesome Miner Antminer firmware. As with all Vnish-based firmware it has a 2.8% mining fee. We get a part of that mining fee. When running Antminers with the Awesome Miner firmware, you can manage and monitor these Antminers using Awesome Miner at no additional cost. We have integrated the firmware with Awesome Miner and also made the installation process very easy in the latest release. Awesome Miner will detect and unlock your Antminer S19/T19/L7 miner to allow it to install the firmware directly to the Antminer - without having to use SD-card like you had in the past. So it's easy to get started. For more information about the S19 firmware, please see: https://support.awesomeminer.com/support/solutions/articles/35000189959-awesome-miner-antminer-s19-firmwarevnish telegram support declined this and i got kicked after i post what u wrote here...
|
|
|
|
|
|
|
|
"The nature of Bitcoin is such that once version 0.1 was released, the
core design was set in stone for the rest of its lifetime." -- Satoshi
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
|
patrike (OP)
Legendary
Offline
Activity: 3318
Merit: 1084
|
|
August 31, 2023, 01:05:20 PM |
|
killer feature!!! are you using vnish devfee pool or own? - Install the Awesome Miner Antminer S19/L7 firmware to Antminers without the need of SD cards. - Automatic unlocking to allow installing directly on the Antminer.
We have a partnership with the Vnish team to provide you with the Awesome Miner Antminer firmware. As with all Vnish-based firmware it has a 2.8% mining fee. We get a part of that mining fee. When running Antminers with the Awesome Miner firmware, you can manage and monitor these Antminers using Awesome Miner at no additional cost. We have integrated the firmware with Awesome Miner and also made the installation process very easy in the latest release. Awesome Miner will detect and unlock your Antminer S19/T19/L7 miner to allow it to install the firmware directly to the Antminer - without having to use SD-card like you had in the past. So it's easy to get started. For more information about the S19 firmware, please see: https://support.awesomeminer.com/support/solutions/articles/35000189959-awesome-miner-antminer-s19-firmwarevnish telegram support declined this and i got kicked after i post what u wrote here... I'm not sure what was communicated or declined here but it could be that someone at their support channel didn't like certain links to be posted. Anyway - all I stated in my previous post is fully correct so anyone that want to use Awesome Miner to easily deploy our firmware to their S19 miners can do so.
|
Awesome Miner - Complete solution to manage and monitor mining operations of ASIC, GPU and CPU miners Optimized Antminer firmware - Increased hashrate, improved power efficiency and more features. For S9, S9i, S9j, T9+, L3+, S17, S17 Pro, S17+, T17, T17+, S19, S19 Pro, S19j, S19j Pro, T19 Up to 200,000 miners | Notifications | Native overclocking | Profit switching | Customizable rules | API | Windows application | Mobile web
|
|
|
sxemini
Member
Offline
Activity: 1558
Merit: 69
|
|
August 31, 2023, 01:29:34 PM |
|
Magicpool shutting down tomorrow, please delete from online services. Can you add https://richpool.pro/ instead of magicpool? EthashB3 also missing and can you correct the dual mine options for EthashB3 + xxx (rigel, srbminer, bzminer). I added Ethb3 by myself, but the dual mine options doesn´t work. AM doesn´t add the parameters for the second algo.
|
|
|
|
patrike (OP)
Legendary
Offline
Activity: 3318
Merit: 1084
|
|
September 01, 2023, 12:48:28 PM |
|
Magicpool shutting down tomorrow, please delete from online services. Can you add https://richpool.pro/ instead of magicpool? EthashB3 also missing and can you correct the dual mine options for EthashB3 + xxx (rigel, srbminer, bzminer). I added Ethb3 by myself, but the dual mine options doesn´t work. AM doesn´t add the parameters for the second algo. Thanks for the feedback. Magicpool will be removed in the next release and I will consider the one you linked to. The software definitions has been updated to fully include EthashB3.
|
Awesome Miner - Complete solution to manage and monitor mining operations of ASIC, GPU and CPU miners Optimized Antminer firmware - Increased hashrate, improved power efficiency and more features. For S9, S9i, S9j, T9+, L3+, S17, S17 Pro, S17+, T17, T17+, S19, S19 Pro, S19j, S19j Pro, T19 Up to 200,000 miners | Notifications | Native overclocking | Profit switching | Customizable rules | API | Windows application | Mobile web
|
|
|
patrike (OP)
Legendary
Offline
Activity: 3318
Merit: 1084
|
|
September 01, 2023, 12:52:35 PM |
|
Awesome Miner version 9.10.4
Awesome Miner Antminer firmware - Added support for more Antminer S19 variations ASIC mining - Improved integration with Auradine Teraflux ASIC miners, with support for firmware updates and hashrate configuration Features - Improved C# scripting to allow putting ASIC miners into low power mode Changes - Removed MagicPool Mining software - BzMIner 16.0.5 - CpuMiner-Opt 3.23.0 - Rigel 1.7.2 - SrbMiner-Multi 2.3.5 - TeamBlackMiner 1.99
|
Awesome Miner - Complete solution to manage and monitor mining operations of ASIC, GPU and CPU miners Optimized Antminer firmware - Increased hashrate, improved power efficiency and more features. For S9, S9i, S9j, T9+, L3+, S17, S17 Pro, S17+, T17, T17+, S19, S19 Pro, S19j, S19j Pro, T19 Up to 200,000 miners | Notifications | Native overclocking | Profit switching | Customizable rules | API | Windows application | Mobile web
|
|
|
patrike (OP)
Legendary
Offline
Activity: 3318
Merit: 1084
|
|
September 11, 2023, 03:38:11 PM |
|
Awesome Miner version 9.10.5
Awesome Miner Antminer firmware - Added support for S19 Hydro ASIC mining - Improve support for Antminers running custom firmware Mining software - OneZero Miner 1.2.4 - TT-miner 2023.4.0 Corrections - Correction to hashrate display for individual hash boards for Antminer L7 running the Awesome Miner Antminer firmware
|
Awesome Miner - Complete solution to manage and monitor mining operations of ASIC, GPU and CPU miners Optimized Antminer firmware - Increased hashrate, improved power efficiency and more features. For S9, S9i, S9j, T9+, L3+, S17, S17 Pro, S17+, T17, T17+, S19, S19 Pro, S19j, S19j Pro, T19 Up to 200,000 miners | Notifications | Native overclocking | Profit switching | Customizable rules | API | Windows application | Mobile web
|
|
|
bensam1231
Legendary
Offline
Activity: 1750
Merit: 1024
|
|
September 15, 2023, 11:15:38 PM |
|
Hey Patrike, running into some weird issues with Rules > Action > Wait. It seems like it doesn't trigger the first action and WAIT based on where it is in the list, it instead WAITs prior to doing any actions, at least with changing variables.
|
I buy private Nvidia miners. Send information and/or inquiries to my PM box.
|
|
|
patrike (OP)
Legendary
Offline
Activity: 3318
Merit: 1084
|
|
September 20, 2023, 07:29:21 PM |
|
Hey Patrike, running into some weird issues with Rules > Action > Wait. It seems like it doesn't trigger the first action and WAIT based on where it is in the list, it instead WAITs prior to doing any actions, at least with changing variables.
Thanks for your report. I've been trying to reproduce this without success. What I tried is the following as actions: Set global variable value: 1 Wait 10 s Set global variable value: 3 Wait 10 s Set global variable value: 5 When I trigger this rule I can look at the global variable and see that it changes to 1, then 3 and finally to 5 - just as expected.
|
Awesome Miner - Complete solution to manage and monitor mining operations of ASIC, GPU and CPU miners Optimized Antminer firmware - Increased hashrate, improved power efficiency and more features. For S9, S9i, S9j, T9+, L3+, S17, S17 Pro, S17+, T17, T17+, S19, S19 Pro, S19j, S19j Pro, T19 Up to 200,000 miners | Notifications | Native overclocking | Profit switching | Customizable rules | API | Windows application | Mobile web
|
|
|
patrike (OP)
Legendary
Offline
Activity: 3318
Merit: 1084
|
|
September 29, 2023, 08:40:05 AM |
|
Awesome Miner version 9.10.6
Awesome Miner Antminer firmware - Include a few missing firmware configuration properties in Awesome Miner ASIC mining - Added support for DesiweMiner K10 Pro - Improve integration with IceRiver KS0 Mining software - CpuMiner-Opt 2.23.3 - Rigel 1.8.1 - TT-Miner 2023.4.1 - TeamBlackMiner 2.01
|
Awesome Miner - Complete solution to manage and monitor mining operations of ASIC, GPU and CPU miners Optimized Antminer firmware - Increased hashrate, improved power efficiency and more features. For S9, S9i, S9j, T9+, L3+, S17, S17 Pro, S17+, T17, T17+, S19, S19 Pro, S19j, S19j Pro, T19 Up to 200,000 miners | Notifications | Native overclocking | Profit switching | Customizable rules | API | Windows application | Mobile web
|
|
|
nordmann666
Member
Offline
Activity: 361
Merit: 16
|
|
September 30, 2023, 06:15:20 PM |
|
new version bugged with Whatsminer reported hashrate Version: 9.10.6 (100) API command: config { "STATUS": "E", "When": 1696097646, "Code": 14, "Msg": "invalid cmd", "Description": "" } API command: summary { "STATUS": [ { "STATUS": "S", "Msg": "Summary" } ], "SUMMARY": [ { "Elapsed": 36997, "MHS av": 84288937.23, "MHS 5s": 101535086.89, "MHS 1m": 84094103.34, "MHS 5m": 84277031.0, "MHS 15m": 84293775.86, "HS RT": 84277031.0, "Accepted": 1313, "Rejected": 0, "Total MH": 3118448944256.0, "Temperature": 46.75, "freq_avg": 715, "Fan Speed In": 0, "Fan Speed Out": 0, "Power": 3205, "Power Rate": 38.03, "Pool Rejected%": 0.0, "Pool Stale%": 0.0, "Uptime": 37399, "Hash Stable": true, "Hash Stable Cost Seconds": 374, "Hash Deviation%": 0.0222, "Target Freq": 706, "Target MHS": 84083190.0, "Env Temp": 50.5, "Power Mode": "Normal", "Factory GHS": 87951, "Power Limit": 3200, "Chip Temp Min": 63.0, "Chip Temp Max": 81.9, "Chip Temp Avg": 73.5, "Debug": "", "Btminer Fast Boot": "disable", "Upfreq Complete": 1 } ], "id": 1 } API command: privileged { "STATUS": "E", "When": 1696097646, "Code": 14, "Msg": "invalid cmd", "Description": "" } API command: edevs { "STATUS": [ { "STATUS": "S", "Msg": "3 ASC(s)" } ], "DEVS": [ { "ASC": 0, "Slot": 0, "Enabled": "Y", "Status": "Alive", "Temperature": 46.75, "Chip Frequency": 722, "MHS av": 28296777.73, "MHS 5s": 28166125.1, "MHS 1m": 28284638.58, "MHS 5m": 28362602.76, "MHS 15m": 28334921.29, "HS RT": 28362602.76, "Factory GHS": 29367, "Upfreq Complete": 1, "Effective Chips": 105, "PCB SN": "xxxxxxxxxxxxxxxx", "Chip Data": "xxxxxxxxxxxxxxxx", "Chip Temp Min": 63.9, "Chip Temp Max": 82.1, "Chip Temp Avg": 73.74, "chip_vol_diff": 10 }, { "ASC": 1, "Slot": 1, "Enabled": "Y", "Status": "Alive", "Temperature": 46.38, "Chip Frequency": 713, "MHS av": 28052366.5, "MHS 5s": 28121470.13, "MHS 1m": 28009448.47, "MHS 5m": 28052641.79, "MHS 15m": 28050671.15, "HS RT": 28052641.79, "Factory GHS": 29221, "Upfreq Complete": 1, "Effective Chips": 105, "PCB SN": "xxxxxxxxxxxxxx", "Chip Data": "xxxxxxxxxxxxx", "Chip Temp Min": 63.9, "Chip Temp Max": 81.9, "Chip Temp Avg": 73.53, "chip_vol_diff": 10 }, { "ASC": 2, "Slot": 2, "Enabled": "Y", "Status": "Alive", "Temperature": 46.12, "Chip Frequency": 711, "MHS av": 27938742.06, "MHS 5s": 28178201.74, "MHS 1m": 27888920.82, "MHS 5m": 27861786.45, "MHS 15m": 27908183.42, "HS RT": 27861786.45, "Factory GHS": 29363, "Upfreq Complete": 1, "Effective Chips": 105, "PCB SN": "xxxxxxxxxxxxxx", "Chip Data": "xxxxxxxxxxxxxxx", "Chip Temp Min": 63.0, "Chip Temp Max": 81.6, "Chip Temp Avg": 73.25, "chip_vol_diff": 10 } ], "id": 1 } API command: pools { "STATUS": [ { "STATUS": "S", "Msg": "1 Pool(s)" } ], "POOLS": [ { "POOL": 1, "URL": "xxxxxxxxxxxxxxxx", "Status": "Alive", "Priority": 0, "Quota": 1, "Getworks": 3424, "Accepted": 1313, "Rejected": 0, "Works": 0, "Discarded": 0, "Stale": 0, "Get Failures": 0, "Remote Failures": 0, "User": "norman666.191968", "Last Share Time": 1696097587, "Stratum Active": true, "Stratum Difficulty": 524288.0, "Pool Rejected%": 0.0, "Pool Stale%": 0.0, "Bad Work": 62, "Current Block Height": 0, "Current Block Version": 536870916, "To Remove": false } ], "id": 1 } API command: coin { "STATUS": "E", "When": 1696097646, "Code": 14, "Msg": "invalid cmd", "Description": "" } API command: stats { "STATUS": "E", "When": 1696097646, "Code": 14, "Msg": "invalid cmd", "Description": "" } API command: devdetails { "STATUS": [ { "STATUS": "S", "Msg": "Device Details" } ], "DEVDETAILS": [ { "DEVDETAILS": 0, "Name": "SM", "ID": 0, "Driver": "bitmicro", "Kernel": "", "Model": "M30SVE10" }, { "DEVDETAILS": 1, "Name": "SM", "ID": 1, "Driver": "bitmicro", "Kernel": "", "Model": "M30SVE10" }, { "DEVDETAILS": 2, "Name": "SM", "ID": 2, "Driver": "bitmicro", "Kernel": "", "Model": "M30SVE10" } ], "id": 1 } Awesome Miner version 9.10.6
Awesome Miner Antminer firmware - Include a few missing firmware configuration properties in Awesome Miner ASIC mining - Added support for DesiweMiner K10 Pro - Improve integration with IceRiver KS0 Mining software - CpuMiner-Opt 2.23.3 - Rigel 1.8.1 - TT-Miner 2023.4.1 - TeamBlackMiner 2.01
|
|
|
|
patrike (OP)
Legendary
Offline
Activity: 3318
Merit: 1084
|
|
October 02, 2023, 06:57:05 AM |
|
new version bugged with Whatsminer reported hashrate Awesome Miner version 9.10.6
Awesome Miner Antminer firmware - Include a few missing firmware configuration properties in Awesome Miner ASIC mining - Added support for DesiweMiner K10 Pro - Improve integration with IceRiver KS0 Mining software - CpuMiner-Opt 2.23.3 - Rigel 1.8.1 - TT-Miner 2023.4.1 - TeamBlackMiner 2.01
Thanks for your report. Unfortunately you are correct. There is an issue where the Whatsminer and Antminers running BraiinsOS doesn't show the hashrate correctly. For Whatsminer you do see what they report as the 5 second average hash rate - but we shouldn't use that one because it's typically too high. Instead, Awesome Miner should go for the 1 minute average hash rate as it's the more relalistic value reported. There will be a new version available during the day to correct this issue. Sorry for any inconvenience.
|
Awesome Miner - Complete solution to manage and monitor mining operations of ASIC, GPU and CPU miners Optimized Antminer firmware - Increased hashrate, improved power efficiency and more features. For S9, S9i, S9j, T9+, L3+, S17, S17 Pro, S17+, T17, T17+, S19, S19 Pro, S19j, S19j Pro, T19 Up to 200,000 miners | Notifications | Native overclocking | Profit switching | Customizable rules | API | Windows application | Mobile web
|
|
|
patrike (OP)
Legendary
Offline
Activity: 3318
Merit: 1084
|
|
October 02, 2023, 10:15:24 AM |
|
Awesome Miner version 9.10.7
Awesome Miner Antminer firmware - Added mining profiles for Awesome Miner firmware, Antminer S19 (126 chip) Mining software - BzMiner 17.0.0 - OneZero Miner 1.2.5 - Rigel 1.9.0 - SrbMiner-Multi 2.3.6 Changes - Improve predefined rules to have action limits by default Corrections - Correction to hash rate display for Whatsminer and Antminers running BraiinsOS
|
Awesome Miner - Complete solution to manage and monitor mining operations of ASIC, GPU and CPU miners Optimized Antminer firmware - Increased hashrate, improved power efficiency and more features. For S9, S9i, S9j, T9+, L3+, S17, S17 Pro, S17+, T17, T17+, S19, S19 Pro, S19j, S19j Pro, T19 Up to 200,000 miners | Notifications | Native overclocking | Profit switching | Customizable rules | API | Windows application | Mobile web
|
|
|
sxemini
Member
Offline
Activity: 1558
Merit: 69
|
|
October 02, 2023, 11:39:47 AM |
|
Awesome Miner version 9.10.7
Awesome Miner Antminer firmware - Added mining profiles for Awesome Miner firmware, Antminer S19 (126 chip) Mining software - BzMiner 17.0.0 - OneZero Miner 1.2.5 - Rigel 1.9.0 - SrbMiner-Multi 2.3.6 Changes - Improve predefined rules to have action limits by default Corrections - Correction to hash rate display for Whatsminer and Antminers running BraiinsOS
Dual Mining options for Rigel Octopus+ second doesn´t work. Only the first coin is in the commandline, the second is ignored. If i add the parameters for the second coin to the commandline, AM use this parameters and override the first pool, so the same problem like in the past. I setup a normal pool and i wrote this in the commandline -a octopus+alephium [2]stratum+tcp://de.alephium.herominers.com:1199 -u [2]xxxxxxx.worker -p [2]x this is the result: -a octopus+alephium [2]stratum+tcp://de.alephium.herominers.com:1199 -u [2]xxxxxxx.worker -p [2]x -o stratum+tcp://pool.eu.woolypooly.com:3094 --api-bind 0.0.0.0:4028 --no-watchdog complete random commandline this belongs to all combinations with octopus
|
|
|
|
patrike (OP)
Legendary
Offline
Activity: 3318
Merit: 1084
|
|
October 04, 2023, 08:17:28 PM |
|
Awesome Miner version 9.10.7
Awesome Miner Antminer firmware - Added mining profiles for Awesome Miner firmware, Antminer S19 (126 chip) Mining software - BzMiner 17.0.0 - OneZero Miner 1.2.5 - Rigel 1.9.0 - SrbMiner-Multi 2.3.6 Changes - Improve predefined rules to have action limits by default Corrections - Correction to hash rate display for Whatsminer and Antminers running BraiinsOS
Dual Mining options for Rigel Octopus+ second doesn´t work. Only the first coin is in the commandline, the second is ignored. If i add the parameters for the second coin to the commandline, AM use this parameters and override the first pool, so the same problem like in the past. I setup a normal pool and i wrote this in the commandline -a octopus+alephium [2]stratum+tcp://de.alephium.herominers.com:1199 -u [2]xxxxxxx.worker -p [2]x this is the result: -a octopus+alephium [2]stratum+tcp://de.alephium.herominers.com:1199 -u [2]xxxxxxx.worker -p [2]x -o stratum+tcp://pool.eu.woolypooly.com:3094 --api-bind 0.0.0.0:4028 --no-watchdog complete random commandline this belongs to all combinations with octopus There is a new mining software definition update available now, where Octopus dual mining is supported for Rigel.
|
Awesome Miner - Complete solution to manage and monitor mining operations of ASIC, GPU and CPU miners Optimized Antminer firmware - Increased hashrate, improved power efficiency and more features. For S9, S9i, S9j, T9+, L3+, S17, S17 Pro, S17+, T17, T17+, S19, S19 Pro, S19j, S19j Pro, T19 Up to 200,000 miners | Notifications | Native overclocking | Profit switching | Customizable rules | API | Windows application | Mobile web
|
|
|
bensam1231
Legendary
Offline
Activity: 1750
Merit: 1024
|
|
October 07, 2023, 04:35:43 AM |
|
Hey Patrike, running into some weird issues with Rules > Action > Wait. It seems like it doesn't trigger the first action and WAIT based on where it is in the list, it instead WAITs prior to doing any actions, at least with changing variables.
Thanks for your report. I've been trying to reproduce this without success. What I tried is the following as actions: Set global variable value: 1 Wait 10 s Set global variable value: 3 Wait 10 s Set global variable value: 5 When I trigger this rule I can look at the global variable and see that it changes to 1, then 3 and finally to 5 - just as expected. Wanted to make sure I had this figured out. It looks like AM doesn't always function correctly and things are delayed or possibly aren't executed on systems that are heavily overloaded. The computer it was on was around 80-90% CPU utilization. Setting AM to high priority fixed this and haven't had a issue since doing this. I believe this issue can be duplicated by overloading the work system. Could a option be added to run AM as high priority on startup (or whatever the person wants)?
|
I buy private Nvidia miners. Send information and/or inquiries to my PM box.
|
|
|
JayDDee
|
|
October 08, 2023, 03:32:14 AM |
|
Hey Patrike, running into some weird issues with Rules > Action > Wait. It seems like it doesn't trigger the first action and WAIT based on where it is in the list, it instead WAITs prior to doing any actions, at least with changing variables.
Thanks for your report. I've been trying to reproduce this without success. What I tried is the following as actions: Set global variable value: 1 Wait 10 s Set global variable value: 3 Wait 10 s Set global variable value: 5 When I trigger this rule I can look at the global variable and see that it changes to 1, then 3 and finally to 5 - just as expected. Wanted to make sure I had this figured out. It looks like AM doesn't always function correctly and things are delayed or possibly aren't executed on systems that are heavily overloaded. The computer it was on was around 80-90% CPU utilization. Setting AM to high priority fixed this and haven't had a issue since doing this. I believe this issue can be duplicated by overloading the work system. Could a option be added to run AM as high priority on startup (or whatever the person wants)? Seems like a race condition that fails under heavy load, the kind of problem that can cause spacecraft to crash on Mars: https://www.cs.cornell.edu/courses/cs614/1999sp/papers/pathfinder.htmlHave fun reproducing it. Number 2 seems like an acceptible workaround: https://www.guidingtech.com/top-ways-to-change-priority-level-for-programs-on-windows-10-and-windows-11/You might also want to avoid running AM on a heavily loaded system. It had to be said.
|
|
|
|
nordmann666
Member
Offline
Activity: 361
Merit: 16
|
|
October 08, 2023, 10:42:19 AM |
|
is there any way to change the default temp that is displayed on dashboard for asics?
for whatsminers "Chip Temp Max":" <- this is what i want to see as temp and is it also possible to change the colours at temp x? i mean...85°C for example is in green area for whatsminers...95°C maybe yellow and red should start at 105°C
|
|
|
|
izhyrnyy
Newbie
Offline
Activity: 12
Merit: 0
|
|
October 08, 2023, 02:45:47 PM |
|
What is the initialization time for the GPU miner? Is it possible to increase it in the settings? I have a problem. RIG for 10 video cards and 10 miners with their own profit profiles, Linux. The problem only appears on SRB-MINER on cards and AMD and NVIDIA on the DNX coin This coin has a much longer initialization time. Miners, without waiting for initialization, restart the process. And so it goes cyclically. With 10 miners on onezerrominer - and other coins - everything is fine. I change to SRB-MINER on two video cards - cyclic restart. I run 10 processes in 10 consoles - everything is OK
|
|
|
|
patrike (OP)
Legendary
Offline
Activity: 3318
Merit: 1084
|
|
October 11, 2023, 08:37:28 PM |
|
Hey Patrike, running into some weird issues with Rules > Action > Wait. It seems like it doesn't trigger the first action and WAIT based on where it is in the list, it instead WAITs prior to doing any actions, at least with changing variables.
Thanks for your report. I've been trying to reproduce this without success. What I tried is the following as actions: Set global variable value: 1 Wait 10 s Set global variable value: 3 Wait 10 s Set global variable value: 5 When I trigger this rule I can look at the global variable and see that it changes to 1, then 3 and finally to 5 - just as expected. Wanted to make sure I had this figured out. It looks like AM doesn't always function correctly and things are delayed or possibly aren't executed on systems that are heavily overloaded. The computer it was on was around 80-90% CPU utilization. Setting AM to high priority fixed this and haven't had a issue since doing this. I believe this issue can be duplicated by overloading the work system. Thanks for the update. So it could simply be that when it looked like Awesome Miner "waits prior to doing any actions" - it was simply too much load on the computer that made things run slower than usual. I don't think there are any general issues with the variable action in combination with wait actions.
|
Awesome Miner - Complete solution to manage and monitor mining operations of ASIC, GPU and CPU miners Optimized Antminer firmware - Increased hashrate, improved power efficiency and more features. For S9, S9i, S9j, T9+, L3+, S17, S17 Pro, S17+, T17, T17+, S19, S19 Pro, S19j, S19j Pro, T19 Up to 200,000 miners | Notifications | Native overclocking | Profit switching | Customizable rules | API | Windows application | Mobile web
|
|
|
patrike (OP)
Legendary
Offline
Activity: 3318
Merit: 1084
|
|
October 11, 2023, 08:43:57 PM |
|
is there any way to change the default temp that is displayed on dashboard for asics?
for whatsminers "Chip Temp Max":" <- this is what i want to see as temp and is it also possible to change the colours at temp x? i mean...85°C for example is in green area for whatsminers...95°C maybe yellow and red should start at 105°C
I noticed that we read the chip temperatures on Whatsminer, something we do for many other ASIC miners. Please allow me to look into this for the next release. Chip temperature colors are configured in the Options dialog, Appearance section. Once we read the chip temperature for Whatsminer, you can use it to configure the colors.
|
Awesome Miner - Complete solution to manage and monitor mining operations of ASIC, GPU and CPU miners Optimized Antminer firmware - Increased hashrate, improved power efficiency and more features. For S9, S9i, S9j, T9+, L3+, S17, S17 Pro, S17+, T17, T17+, S19, S19 Pro, S19j, S19j Pro, T19 Up to 200,000 miners | Notifications | Native overclocking | Profit switching | Customizable rules | API | Windows application | Mobile web
|
|
|
|