[ANN] SpreadCoin | True Decentralization (No Pools) | Testing New Masternodes

[chrysophylax]

What settings do you recommend for a AMD R9 280x & what intensity ?

Whoa! That's a 280X? It must be seriously damaged  

Intensity is on 8

Mine's still slightly above 3MH/s - there's plenty more to do, but I got distracted.

wolf - how do we get a chance at your miner? ...

#crysx

[1715195629]

1715195629

[1715195629]

1715195629

[1715195629]

1715195629

[Nthused]

What settings do you recommend for a AMD R9 280x & what intensity ?

Whoa! That's a 280X? It must be seriously damaged  

Intensity is on 8

Mine's still slightly above 3MH/s - there's plenty more to do, but I got distracted.

I've setup mine with -I 21 now and 1.8Mhs seems to be the most I can get.

[chrysophylax]

What settings do you recommend for a AMD R9 280x & what intensity ?

Whoa! That's a 280X? It must be seriously damaged  

Intensity is on 8

Mine's still slightly above 3MH/s - there's plenty more to do, but I got distracted.

I've setup mine with -I 21 now and 1.8Mhs seems to be the most I can get.

thats due to the simple fact that - your not wolf ...

#crysx

[kcanup]

What settings do you recommend for a AMD R9 280x & what intensity ?

Whoa! That's a 280X? It must be seriously damaged  

Intensity is on 8

Mine's still slightly above 3MH/s - there's plenty more to do, but I got distracted.

I've setup mine with -I 21 now and 1.8Mhs seems to be the most I can get.

Try 19, 18 or even 13 or 12 and check the difference yourself mate.. Intensity high at 21 doesnt mean you ll get highest hashrate, sometimes you need to find a sweet spot to match your hardware and all amd kernel software where you can boost your hashrate slightly if everything is matched. 

I was a gpu miner back in days of 2013 but no more now so i cant say 100% tho 

[DES_MX]

I've mined 4 blocks in the first day with 1xGtx980 @ 5.2mhash and then added -x 32 flag to the miner, hashrate went up to 5.4mhash but since then no accepted shares (for like 1 day now)... could it be that the flag causes rejects? how can i check in the nvidia miner? thanks for help

Can someone please assist with the above? Is there any way to see if all is going well?

Here's image with the miner and wallet

[chrysophylax]

What settings do you recommend for a AMD R9 280x & what intensity ?

Whoa! That's a 280X? It must be seriously damaged  

Intensity is on 8

Mine's still slightly above 3MH/s - there's plenty more to do, but I got distracted.

I've setup mine with -I 21 now and 1.8Mhs seems to be the most I can get.

Try 19, 18 or even 13 or 12 and check the difference yourself mate.. Intensity high at 21 doesnt mean you ll get highest hashrate, sometimes you need to find a sweet spot to match your hardware and all amd kernel software where you can boost your hashrate slightly if everything is matched. 

I was a gpu miner back in days of 2013 but no more now so i cant say 100% tho 

this is true - but what i was saying earlier was that wolf is his OWN dev - so he uses ( and optimizes ) his own kernels ...

so unless he says that its possible to get those hashrates from the public miners / kernels - just assume that its his own hasrates - and they wont be the ones we will be able to get unless we have his miner / kernels ...

#crysx

[chrysophylax]

I've mined 4 blocks in the first day with 1xGtx980 @ 5.2mhash and then added -x 32 flag to the miner, hashrate went up to 5.4mhash but since then no accepted shares (for like 1 day now)... could it be that the flag causes rejects? how can i check in the nvidia miner? thanks for help

Can someone please assist with the above? Is there any way to see if all is going well?

Here's image with the miner and wallet

you are not getting any rejections so far ( the 'booo' ) so all seems well mate ...

#crysx

[tminer]

XSTerminate by @deletebot -  for those troublesome trolls.
https://bitcointalk.org/index.php?topic=850210

AWESOME!

[antonio8]

I've mined 4 blocks in the first day with 1xGtx980 @ 5.2mhash and then added -x 32 flag to the miner, hashrate went up to 5.4mhash but since then no accepted shares (for like 1 day now)... could it be that the flag causes rejects? how can i check in the nvidia miner? thanks for help

Can someone please assist with the above? Is there any way to see if all is going well?

Here's image with the miner and wallet

Looks like you are still doing fine. You can go hours or even a day without finding a block with your hash rate. Remember luck plays a part in finding blocks.

Also don't know what part of the world you are in but in my time zone you have not been 24 hrs yet since your last block.

[DES_MX]

Okay thanks, looks like i just need to increase my hash.
Is GTX980 king of the hill, or does R9 290X also offer great results?

I've mined 4 blocks in the first day with 1xGtx980 @ 5.2mhash and then added -x 32 flag to the miner, hashrate went up to 5.4mhash but since then no accepted shares (for like 1 day now)... could it be that the flag causes rejects? how can i check in the nvidia miner? thanks for help

Can someone please assist with the above? Is there any way to see if all is going well?

Here's image with the miner and wallet

Looks like you are still doing fine. You can go hours or even a day without finding a block with your hash rate. Remember luck plays a part in finding blocks.

Also don't know what part of the world you are in but in my time zone you have not been 24 hrs yet since your last block.

[ol92]

Okay thanks, looks like i just need to increase my hash.
Is GTX980 king of the hill, or does R9 290X also offer great results?

I've mined 4 blocks in the first day with 1xGtx980 @ 5.2mhash and then added -x 32 flag to the miner, hashrate went up to 5.4mhash but since then no accepted shares (for like 1 day now)... could it be that the flag causes rejects? how can i check in the nvidia miner? thanks for help

Can someone please assist with the above? Is there any way to see if all is going well?

Here's image with the miner and wallet

Looks like you are still doing fine. You can go hours or even a day without finding a block with your hash rate. Remember luck plays a part in finding blocks.

Also don't know what part of the world you are in but in my time zone you have not been 24 hrs yet since your last block.

GTX 980 is the king ( I have a R9 290X and I have about 2.5 mh/s) -except maybe with private kernel : but it seems even with private ones the GTX980 is better for this coin.

[RenegadeMan]

Just a reminder everyone.

Big red text "doesn't ,understand ,commas" guy hasn't been here since page 277 and a bit over 10 hours ago. Chances are he went to sleep exhausted from hurling all that negativity (it is very draining). It's possible we won't see him again but then it's highly likely he'll start up his FUD campaign again any moment now.

The key to stopping this is DON'T RESPOND. Just let his stuff go past and DON'T BITE. Even when it really gets your back up DON'T ENGAGE!

Same for the others involved in smearing Spread. Just don't engage.

But if someone's asking legitimate questions then of course we all should try to educate and answer. There was a terrible period last year in the DRK thread where a few people (and one individual in particular....anyone who's been there for a while will know who I'm talking about) were extremely harsh and rude to newcomers. It was pretty appalling and a guaranteed way to lose new investors; let's not be like that here.

[thelonecrouton]

I've mined for ages at 3.4mh/s and still nothing, yet the only way is to solo mine

You either need to set up a private pool as some people have done (with escrow, mutlisig or other arrangements to prevent theft of mining) or get yourself a bigger rig. 

Or wait more than a few hours... 

Whatever your hash rate, solo mining will over time earn you just as much as pooled mining.

[Nthused]

I've mined for ages at 3.4mh/s and still nothing, yet the only way is to solo mine

You either need to set up a private pool as some people have done (with escrow, mutlisig or other arrangements to prevent theft of mining) or get yourself a bigger rig.  

Or wait more than a few hours...  

Whatever your hash rate, solo mining will over time earn you just as much as pooled mining.

I tried to solo mine with my reconfigured settings, the hashrate increased but I wasn't getting any BS/Shares just detecting new block after block the same as before.

[thelonecrouton]

I've mined for ages at 3.4mh/s and still nothing, yet the only way is to solo mine

You either need to set up a private pool as some people have done (with escrow, mutlisig or other arrangements to prevent theft of mining) or get yourself a bigger rig.  

Or wait more than a few hours...  

Whatever your hash rate, solo mining will over time earn you just as much as pooled mining.

I tried to solo mine with my reconfigured settings, the hashrate increased but I wasn't getting any BS/Shares just detecting new block after block the same as before.

I have bolded my post in the hope that this time you actually read it. 

[chrysophylax]

Okay thanks, looks like i just need to increase my hash.
Is GTX980 king of the hill, or does R9 290X also offer great results?

I've mined 4 blocks in the first day with 1xGtx980 @ 5.2mhash and then added -x 32 flag to the miner, hashrate went up to 5.4mhash but since then no accepted shares (for like 1 day now)... could it be that the flag causes rejects? how can i check in the nvidia miner? thanks for help

Can someone please assist with the above? Is there any way to see if all is going well?

Here's image with the miner and wallet

Looks like you are still doing fine. You can go hours or even a day without finding a block with your hash rate. Remember luck plays a part in finding blocks.

Also don't know what part of the world you are in but in my time zone you have not been 24 hrs yet since your last block.

GTX 980 is the king ( I have a R9 290X and I have about 2.5 mh/s) -except maybe with private kernel : but it seems even with private ones the GTX980 is better for this coin.

290X will probably beat a 980 if well done - it's just that those AMD drivers make it really hard to do so. With enough effort, I'm pretty sure the 290X will beat the 980 by a decent sized amount. With just some basic stupid code elimination and small tweaks that pander to the braindead AMD OpenCL compiler, the 290X will pull 4MH/s on Spread all day - I took this on the 21st:

Screenshot (NSFW): https://ottrbutt.com/miner/spreadwolf-01212015.png

any way of getting a hold of this miner / kernel from you wolf? ...

pm me if you have any ideas on how we can do this please ...

#crysx

[Gladimor]

Okay thanks, looks like i just need to increase my hash.
Is GTX980 king of the hill, or does R9 290X also offer great results?

I've mined 4 blocks in the first day with 1xGtx980 @ 5.2mhash and then added -x 32 flag to the miner, hashrate went up to 5.4mhash but since then no accepted shares (for like 1 day now)... could it be that the flag causes rejects? how can i check in the nvidia miner? thanks for help

Can someone please assist with the above? Is there any way to see if all is going well?

Here's image with the miner and wallet

Looks like you are still doing fine. You can go hours or even a day without finding a block with your hash rate. Remember luck plays a part in finding blocks.

Also don't know what part of the world you are in but in my time zone you have not been 24 hrs yet since your last block.

GTX 980 is the king ( I have a R9 290X and I have about 2.5 mh/s) -except maybe with private kernel : but it seems even with private ones the GTX980 is better for this coin.

290X will probably beat a 980 if well done - it's just that those AMD drivers make it really hard to do so. With enough effort, I'm pretty sure the 290X will beat the 980 by a decent sized amount. With just some basic stupid code elimination and small tweaks that pander to the braindead AMD OpenCL compiler, the 290X will pull 4MH/s on Spread all day - I took this on the 21st:

Screenshot (NSFW): https://ottrbutt.com/miner/spreadwolf-01212015.png

any way of getting a hold of this miner / kernel from you wolf? ...

pm me if you have any ideas on how we can do this please ...

#crysx

I originally opened up a bounty fund for the community to get a hold of this miner, but no one from the community donated/were interested,

[pokeytex]

I've mined for ages at 3.4mh/s and still nothing, yet the only way is to solo mine

Its a solo mining arms race.  You either need to set up a private pool as some people have done (with escrow, mutlisig or other arrangements to prevent theft of mining) or get yourself a bigger rig.  The network hash rate is very high for the likes of your or I with one or two GPUs to burn.

Correct - I run (10) GPUs or about 15 mh/s and I am lucky if I hit 4-6 blocks a day now.

[chrysophylax]

Okay thanks, looks like i just need to increase my hash.
Is GTX980 king of the hill, or does R9 290X also offer great results?

I've mined 4 blocks in the first day with 1xGtx980 @ 5.2mhash and then added -x 32 flag to the miner, hashrate went up to 5.4mhash but since then no accepted shares (for like 1 day now)... could it be that the flag causes rejects? how can i check in the nvidia miner? thanks for help

Can someone please assist with the above? Is there any way to see if all is going well?

Here's image with the miner and wallet

Looks like you are still doing fine. You can go hours or even a day without finding a block with your hash rate. Remember luck plays a part in finding blocks.

Also don't know what part of the world you are in but in my time zone you have not been 24 hrs yet since your last block.

GTX 980 is the king ( I have a R9 290X and I have about 2.5 mh/s) -except maybe with private kernel : but it seems even with private ones the GTX980 is better for this coin.

290X will probably beat a 980 if well done - it's just that those AMD drivers make it really hard to do so. With enough effort, I'm pretty sure the 290X will beat the 980 by a decent sized amount. With just some basic stupid code elimination and small tweaks that pander to the braindead AMD OpenCL compiler, the 290X will pull 4MH/s on Spread all day - I took this on the 21st:

Screenshot (NSFW): https://ottrbutt.com/miner/spreadwolf-01212015.png

any way of getting a hold of this miner / kernel from you wolf? ...

pm me if you have any ideas on how we can do this please ...

#crysx

Not currently, but possibly in the future.

kool ...

i can see that you ssh into the workers session - so all of this can be setup for you if you want to have that on this farm also ...

there is always room for an agreement somewhere along the line ...

tanx ...

#crysx

[kcanup]

I've mined for ages at 3.4mh/s and still nothing, yet the only way is to solo mine

You either need to set up a private pool as some people have done (with escrow, mutlisig or other arrangements to prevent theft of mining) or get yourself a bigger rig.  

Or wait more than a few hours...  

Whatever your hash rate, solo mining will over time earn you just as much as pooled mining.

I tried to solo mine with my reconfigured settings, the hashrate increased but I wasn't getting any BS/Shares just detecting new block after block the same as before.

You trying to find a solo block so there will be no shares accepted like in the pool but you gonna see new block detected as network will detect new block in every minute and your computer will try attempt to hash every block if you are lucky you gonna get reward soon or else you have to wait nobody knows how long lol
Keep hashing mate and good luck