[ANN][BURST] Burst | Efficient HDD Mining | New 1.2.3 Fork block 92000

[MiningCamp]

Good day. Very interesting coin, it seems I finally take a rest from noise of my GPUs
Could anyone help me please with 1 burst to start pool mining ?
BURST-NVHU-6ABK-C3WP-HBLV4

[1715122206]

1715122206

[1715122206]

1715122206

[1715122206]

1715122206

[Depredation]

Step 3: If using windows, replace the first word "java" in each of the .bat files with "C:\Windows\SysWOW64\java" and "save as" each of them as .bat files again.

Example for the run_generate .bat file:
Original; java -Xmx4000m -cp pocminer.jar;lib/*;lib/akka/*;lib/jetty/* pocminer.POCMiner generate %*

modified: C:\Windows\SysWOW64\java -Xmx1000m -cp pocminer.jar;lib/*;lib/akka/*;lib/jetty/* pocminer.POCMiner generate %*

Step 3a: Many of the values in the original .bat files were causing issues for my computer, so I changed the -Xmx4000m (or whatever your # was) to a lower value like 1000 or 500 (ie. -Xmx1000m) and it began working. This will be entirely system dependent, and is like tweaking a normal miner's settings to find what works best.

For step 3. I don't see a java folder. Did he meant the java application? How do i "save as". I can't see an option there. I tried renaming java.bat but it is still recognized as "java.bat.exe"

You save as in the run_generate.bat I think

[yellowduck2]

Question.

If i set to plot a single 500 gb file but i have to switch off my computer and stop plotting @ 250 gb. What's the best way to stop plotting before it complete 500 gb ? Am i able to resume plotting ? Is there such thing as corrupted plot if i close the plotting suddenly ?

[alphateam]

Question.

If i set to plot a single 500 gb file but i have to switch off my computer and stop plotting @ 250 gb. What's the best way to stop plotting before it complete 500 gb ? Am i able to resume plotting ? Is there such thing as corrupted plot if i close the plotting suddenly ?

You need to restart ploting from the beginning

[dcct]

Question.

If i set to plot a single 500 gb file but i have to switch off my computer and stop plotting @ 250 gb. What's the best way to stop plotting before it complete 500 gb ? Am i able to resume plotting ? Is there such thing as corrupted plot if i close the plotting suddenly ?

You can still use the partial plot. It will cause an error "error reading file", but it will work.

There is no resume, just start another one with a higher starting nonce.

[yellowduck2]

Question.

If i set to plot a single 500 gb file but i have to switch off my computer and stop plotting @ 250 gb. What's the best way to stop plotting before it complete 500 gb ? Am i able to resume plotting ? Is there such thing as corrupted plot if i close the plotting suddenly ?

You need to restart ploting from the beginning

Question.

If i set to plot a single 500 gb file but i have to switch off my computer and stop plotting @ 250 gb. What's the best way to stop plotting before it complete 500 gb ? Am i able to resume plotting ? Is there such thing as corrupted plot if i close the plotting suddenly ?

You can still use the partial plot. It will cause an error "error reading file", but it will work.

There is no resume, just start another one with a higher starting nonce.

Conflicting answer ?

[victorteoh]

Step 3: If using windows, replace the first word "java" in each of the .bat files with "C:\Windows\SysWOW64\java" and "save as" each of them as .bat files again.

Example for the run_generate .bat file:
Original; java -Xmx4000m -cp pocminer.jar;lib/*;lib/akka/*;lib/jetty/* pocminer.POCMiner generate %*

modified: C:\Windows\SysWOW64\java -Xmx1000m -cp pocminer.jar;lib/*;lib/akka/*;lib/jetty/* pocminer.POCMiner generate %*

Step 3a: Many of the values in the original .bat files were causing issues for my computer, so I changed the -Xmx4000m (or whatever your # was) to a lower value like 1000 or 500 (ie. -Xmx1000m) and it began working. This will be entirely system dependent, and is like tweaking a normal miner's settings to find what works best.

For step 3. I don't see a java folder. Did he meant the java application? How do i "save as". I can't see an option there. I tried renaming java.bat but it is still recognized as "java.bat.exe"

You save as in the run_generate.bat I think

I get it now. But it's still not working after changing every bat file. It shows this error : "missing args"

My run_generate file contents are : C:\Windows\SysWOW64\java -Xmx1000m -cp pocminer.jar;lib/*;lib/akka/*;lib/jetty/* pocminer.POCMiner generate %*

[yellowduck2]

Question.

If i set to plot a single 500 gb file but i have to switch off my computer and stop plotting @ 250 gb. What's the best way to stop plotting before it complete 500 gb ? Am i able to resume plotting ? Is there such thing as corrupted plot if i close the plotting suddenly ?

You can still use the partial plot. It will cause an error "error reading file", but it will work.

There is no resume, just start another one with a higher starting nonce.

So i can close the plot bat anytime and suddenly without any problem ? I can still mine with whatever is left on the plotted file ?

[dcct]

Question.

If i set to plot a single 500 gb file but i have to switch off my computer and stop plotting @ 250 gb. What's the best way to stop plotting before it complete 500 gb ? Am i able to resume plotting ? Is there such thing as corrupted plot if i close the plotting suddenly ?

You can still use the partial plot. It will cause an error "error reading file", but it will work.

There is no resume, just start another one with a higher starting nonce.

So i can close the plot bat anytime and suddenly without any problem ? I can still mine with whatever is left on the plotted file ?

You can. Just make sure your plots don't overlap.

[yellowduck2]

Question.

If i set to plot a single 500 gb file but i have to switch off my computer and stop plotting @ 250 gb. What's the best way to stop plotting before it complete 500 gb ? Am i able to resume plotting ? Is there such thing as corrupted plot if i close the plotting suddenly ?

You can still use the partial plot. It will cause an error "error reading file", but it will work.

There is no resume, just start another one with a higher starting nonce.

So i can close the plot bat anytime and suddenly without any problem ? I can still mine with whatever is left on the plotted file ?

You can. Just make sure your plots don't overlap.

Thank you. That make sense.

[victorteoh]

Nevermind. got it! thanks

Step 3: If using windows, replace the first word "java" in each of the .bat files with "C:\Windows\SysWOW64\java" and "save as" each of them as .bat files again.

Example for the run_generate .bat file:
Original; java -Xmx4000m -cp pocminer.jar;lib/*;lib/akka/*;lib/jetty/* pocminer.POCMiner generate %*

modified: C:\Windows\SysWOW64\java -Xmx1000m -cp pocminer.jar;lib/*;lib/akka/*;lib/jetty/* pocminer.POCMiner generate %*

Step 3a: Many of the values in the original .bat files were causing issues for my computer, so I changed the -Xmx4000m (or whatever your # was) to a lower value like 1000 or 500 (ie. -Xmx1000m) and it began working. This will be entirely system dependent, and is like tweaking a normal miner's settings to find what works best.

For step 3. I don't see a java folder. Did he meant the java application? How do i "save as". I can't see an option there. I tried renaming java.bat but it is still recognized as "java.bat.exe"

You save as in the run_generate.bat I think

I get it now. But it's still not working after changing every bat file. It shows this error : "missing args"

My run_generate file contents are : C:\Windows\SysWOW64\java -Xmx1000m -cp pocminer.jar;lib/*;lib/akka/*;lib/jetty/* pocminer.POCMiner generate %*

[taaku]

how  many coins do i get for 1 TB per day???

[alphateam]

Question.

If i set to plot a single 500 gb file but i have to switch off my computer and stop plotting @ 250 gb. What's the best way to stop plotting before it complete 500 gb ? Am i able to resume plotting ? Is there such thing as corrupted plot if i close the plotting suddenly ?

You can still use the partial plot. It will cause an error "error reading file", but it will work.

There is no resume, just start another one with a higher starting nonce.

So i can close the plot bat anytime and suddenly without any problem ? I can still mine with whatever is left on the plotted file ?

You can. Just make sure your plots don't overlap.

Thank you. That make sense.

Good to know, i really think we need to restart for beginning, so sorry for my bad answer

[yellowduck2]

Question.

If i set to plot a single 500 gb file but i have to switch off my computer and stop plotting @ 250 gb. What's the best way to stop plotting before it complete 500 gb ? Am i able to resume plotting ? Is there such thing as corrupted plot if i close the plotting suddenly ?

You can still use the partial plot. It will cause an error "error reading file", but it will work.

There is no resume, just start another one with a higher starting nonce.

So i can close the plot bat anytime and suddenly without any problem ? I can still mine with whatever is left on the plotted file ?

You can. Just make sure your plots don't overlap.

Thank you. That make sense.

Good to know, i really think we need to restart for beginning, so sorry for my bad answer

If need to restart everybody will be doing 10 - 50 gb plot i think because 1 huge plot is too much risk

[coin-cidence]

how  many coins do i get for 1 TB per day???

~1000-1500 BURST (mining in pool)

[victorteoh]

For 4TB harddisk (3.63TB real space), are my arguments optimum?  0 - 14,400,000. From the guide it says 200GB for 800k

C:\Windows\SysWOW64\java -Xmx1000m -cp pocminer.jar;lib/*;lib/akka/*;lib/jetty/* pocminer.POCMiner generate 460635828253812312 0 14400000 1000 4

[cryptoknight84]

Any news on Bittrex listing ??
Would like to get some BURST, but can't trust C-Cex with my BTC.

[SpeedDemon13]

Any news on Bittrex listing ??
Would like to get some BURST, but can't trust C-Cex with my BTC.

C-Cex is ok, just not a large exchange. I buy and sell there with no issues yet.

[fabula]

Any news on Bittrex listing ??
Would like to get some BURST, but can't trust C-Cex with my BTC.

C-cex is quite good.
But i can understand. Just some patience and burst will be added to bittrex.
Relax and enjoy this new amazing coin.  

[yellowduck2]

i think it might be a good idea to not develop any GPU plotter because if plotting become too fast difficulties will be very high very quickly. Right now CPU plotting put a limit how much people can plot. Even if someone buy 1 Petabyte of HDD they will need many days to plot it whereas if GPU is available people will plot Petabyte in a day and distribution of coin will be left to only a few people who build petabyte farm. People will soon not able to mine using TB if GPU plotting is available