[ANN][BURST] Burst | Efficient HDD Mining | New 1.2.3 Fork block 92000

[Sglasio]

uray, is this ok?
New block 9713, basetarget 6014641                         
650 MB read/2600 GB total/deadline 512209s (511451s left)

ok for what ?

i mine with dcct miner from you howto.

[1714727215]

1714727215

[1714727215]

1714727215

[1714727215]

1714727215

[ltcnim]

I ran the dcct plotter over night from a linux liveusb stick to fill a hdd. my plan was to create 1TB. But after around 22% I had to stop it. The HDD is now connected to Rasperry Pi, happily mining away, but I'd like to enhance the plot file without interrupting the mining.

Is there a way to do that over ssh? And is it correct that I need to calculate the finished plots this way:

filesize / 1024 / 256?

What if I create a new file with a starting nonce a few nonces later than the end nonce of the other file? Is it a problem if there is a gap between two files? (e.g file1 = 0-299950, file2 = 300000-600000)?

As far as I know gaps are not a problem.

ok thanks. any chance to create to plot file to a remote location?

things are gettiung burried so fast in this thread Oo anyone already tried plotting to a remote location?

[fabula]

Current difficulty?

[yellowduck2]

things are gettiung burried so fast in this thread Oo anyone already tried plotting to a remote location?

u mean like to China ?

[MiningCamp]

I created 1 tb plot for 48 hours. Is it enough speed ?

I think its normal, if you got i7 or 8-core AMD.
I generated 500Gb for 24 hours with AMD FX-8320 (7 threads in .bat file)

[uray]

uray, is this ok?
New block 9713, basetarget 6014641                         
650 MB read/2600 GB total/deadline 512209s (511451s left)

ok for what ?

i mine with dcct miner from you howto.

yeah its ok, u r mining, and submiting share

[uray]

@uray is there a page with user statistics ?

not yet

[regtable69]

@coinits & @regtable69
you both are giving your harddrives a run for the money

Code:

Your results (assuming all plots are completed): 
10976174530077743023_507843_4507843_8191: Number of nonces (4507843) is not a multiple of stagger size (8191)
No overlapping nonces

Totals: 
0 nonces overlap (0 KB)
4507843 nonces total (1100 GB)
550 disk seeks per Scoop (4.4 seconds @ 8ms)

Code:

Your results (assuming all plots are completed): 
4651495086655359966_19532000_307999_1000: Number of nonces (307999) is not a multiple of stagger size (1000)
No overlapping nonces

Totals: 
0 nonces overlap (0 KB)
307999 nonces total (75 GB)
307 disk seeks per Scoop (2.4 seconds @ 8ms)

I will have 4 hdds going by the time im finished plotting. I k ow itsballs out during plottingbuti have been able to do 1tb in just over a day.

You missed my point... look at the disk reads per scoop needed with that settings.

Couple of posts back I`ve posted some comparative result with diff. settings.. have a look.

https://bitcointalk.org/index.php?topic=731923.msg8713947#msg8713947

how does the stagger size optimiser thing work my friend downloaded it and all it did was open and then close again instantly.
this thingy

https://bitcointalk.org/index.php?topic=731923.msg8627247#msg8627247

[gigica viteazu`]

@coinits & @regtable69
you both are giving your harddrives a run for the money

Code:

Your results (assuming all plots are completed): 
10976174530077743023_507843_4507843_8191: Number of nonces (4507843) is not a multiple of stagger size (8191)
No overlapping nonces

Totals: 
0 nonces overlap (0 KB)
4507843 nonces total (1100 GB)
550 disk seeks per Scoop (4.4 seconds @ 8ms)

Code:

Your results (assuming all plots are completed): 
4651495086655359966_19532000_307999_1000: Number of nonces (307999) is not a multiple of stagger size (1000)
No overlapping nonces

Totals: 
0 nonces overlap (0 KB)
307999 nonces total (75 GB)
307 disk seeks per Scoop (2.4 seconds @ 8ms)

I will have 4 hdds going by the time im finished plotting. I k ow itsballs out during plottingbuti have been able to do 1tb in just over a day.

You missed my point... look at the disk reads per scoop needed with that settings.

Couple of posts back I`ve posted some comparative result with diff. settings.. have a look.

https://bitcointalk.org/index.php?topic=731923.msg8713947#msg8713947

how does the stagger size optimiser thing work my friend downloaded it and all it did was open and then close again instantly.

place the merge.exe and the below in a .bat file, outside of your plots folder

Code:

cd plots

@for /r . %%g in (*_4096) do (

    ..\merge.exe %%~nxg
    del %%~nxg
    
    timeout /t 10
    
)
@pause

P.S.
replace 4096 value with your stagger size

[regtable69]

@coinits & @regtable69
you both are giving your harddrives a run for the money

Code:

Your results (assuming all plots are completed): 
10976174530077743023_507843_4507843_8191: Number of nonces (4507843) is not a multiple of stagger size (8191)
No overlapping nonces

Totals: 
0 nonces overlap (0 KB)
4507843 nonces total (1100 GB)
550 disk seeks per Scoop (4.4 seconds @ 8ms)

Code:

Your results (assuming all plots are completed): 
4651495086655359966_19532000_307999_1000: Number of nonces (307999) is not a multiple of stagger size (1000)
No overlapping nonces

Totals: 
0 nonces overlap (0 KB)
307999 nonces total (75 GB)
307 disk seeks per Scoop (2.4 seconds @ 8ms)

I will have 4 hdds going by the time im finished plotting. I k ow itsballs out during plottingbuti have been able to do 1tb in just over a day.

You missed my point... look at the disk reads per scoop needed with that settings.

Couple of posts back I`ve posted some comparative result with diff. settings.. have a look.

https://bitcointalk.org/index.php?topic=731923.msg8713947#msg8713947

how does the stagger size optimiser thing work my friend downloaded it and all it did was open and then close again instantly.

place the merge.exe and the below in a .bat file, outside of your plots folder

Code:

cd plots

@for /r . %%g in (*_4096) do (

    ..\merge.exe %%~nxg
    del %%~nxg
    
    timeout /t 10
    
)
@pause

P.S.
replace 4096 value with your stagger size

is that windows version way? my origional stagger was 8191 so is this what I put 8n there or is it the desired stagger?

you only have 8 burst do you not mine lmao

[ltcnim]

things are gettiung burried so fast in this thread Oo anyone already tried plotting to a remote location?

u mean like to China ?

no, I mean like to another servers HDD. since the servers cpu is way too low to create the plots itself, I'd like to use another system with a better CPU.

[gigica viteazu`]

@coinits & @regtable69
you both are giving your harddrives a run for the money

Code:

Your results (assuming all plots are completed): 
10976174530077743023_507843_4507843_8191: Number of nonces (4507843) is not a multiple of stagger size (8191)
No overlapping nonces

Totals: 
0 nonces overlap (0 KB)
4507843 nonces total (1100 GB)
550 disk seeks per Scoop (4.4 seconds @ 8ms)

Code:

Your results (assuming all plots are completed): 
4651495086655359966_19532000_307999_1000: Number of nonces (307999) is not a multiple of stagger size (1000)
No overlapping nonces

Totals: 
0 nonces overlap (0 KB)
307999 nonces total (75 GB)
307 disk seeks per Scoop (2.4 seconds @ 8ms)

I will have 4 hdds going by the time im finished plotting. I k ow itsballs out during plottingbuti have been able to do 1tb in just over a day.

You missed my point... look at the disk reads per scoop needed with that settings.

Couple of posts back I`ve posted some comparative result with diff. settings.. have a look.

https://bitcointalk.org/index.php?topic=731923.msg8713947#msg8713947

how does the stagger size optimiser thing work my friend downloaded it and all it did was open and then close again instantly.

place the merge.exe and the below in a .bat file, outside of your plots folder

Code:

cd plots

@for /r . %%g in (*_4096) do (

    ..\merge.exe %%~nxg
    del %%~nxg
    
    timeout /t 10
    
)
@pause

P.S.
replace 4096 value with your stagger size

is that windows version way? my origional stagger was 8191 so is this what I put 8n there or is it the desired stagger?

Yes, is for Windows. No, it`s just a filter. The merge utility takes only one argument, the filename.

[regtable69]

@coinits & @regtable69
you both are giving your harddrives a run for the money

Code:

Your results (assuming all plots are completed): 
10976174530077743023_507843_4507843_8191: Number of nonces (4507843) is not a multiple of stagger size (8191)
No overlapping nonces

Totals: 
0 nonces overlap (0 KB)
4507843 nonces total (1100 GB)
550 disk seeks per Scoop (4.4 seconds @ 8ms)

Code:

Your results (assuming all plots are completed): 
4651495086655359966_19532000_307999_1000: Number of nonces (307999) is not a multiple of stagger size (1000)
No overlapping nonces

Totals: 
0 nonces overlap (0 KB)
307999 nonces total (75 GB)
307 disk seeks per Scoop (2.4 seconds @ 8ms)

I will have 4 hdds going by the time im finished plotting. I k ow itsballs out during plottingbuti have been able to do 1tb in just over a day.

You missed my point... look at the disk reads per scoop needed with that settings.

Couple of posts back I`ve posted some comparative result with diff. settings.. have a look.

https://bitcointalk.org/index.php?topic=731923.msg8713947#msg8713947

how does the stagger size optimiser thing work my friend downloaded it and all it did was open and then close again instantly.

place the merge.exe and the below in a .bat file, outside of your plots folder

Code:

cd plots

@for /r . %%g in (*_4096) do (

    ..\merge.exe %%~nxg
    del %%~nxg
    
    timeout /t 10
    
)
@pause

P.S.
replace 4096 value with your stagger size

is that windows version way? my origional stagger was 8191 so is this what I put 8n there or is it the desired stagger?

Yes, is for Windows. No, it`s just a filter. The merge utility takes only one argument, the filename.

ok il give it a go myself aft work. cheers.

[fanepatent]

New java miner. I confirm it works
https://bitcointalk.org/index.php?topic=771063

[Jiggy0001]

so there will be almost 60mio coins mined/year, right?

[IncludeBeer]

Has there been any news on a windows version of dcct's Linux plotter?  I know some time back he released an early version....

[gigica viteazu`]

Has there been any news on a windows version of dcct's Linux plotter?  I know some time back he released an early version....

that "early" version works flawless

[Amph]

Has there been any news on a windows version of dcct's Linux plotter?  I know some time back he released an early version....

that "early" version works flawless

that was the plotter, what about the miner?

[gigica viteazu`]

Has there been any news on a windows version of dcct's Linux plotter?  I know some time back he released an early version....

that "early" version works flawless

that was the plotter, what about the miner?

He was asking about the plotter as far as I ca see.

[Makezzila]

New java miner. I confirm it works
https://bitcointalk.org/index.php?topic=771063

How i can used this miner on windows x64?