seeksilence
|
|
February 01, 2015, 08:35:03 PM |
|
Also I got several small mined transactions Net amount: +0.01 XMG Net amount: +0.001 XMG Are those from POS?
Did you see these from transaction details? Can you identify them in the transaction histroy? Also I saw the 5xmg showed in the "Stake" but none of my sub accounts having balance smaller than that. Will that mean if I keep the wallet open, I will get that by POS later ?
PoS splits coins; it's interesting that only 5XMG in stake? I checked several transanctions minted ~0.001xmg: 1. *** (100 XMG) Unknown (0 XMG) *** (50.01 XMG) *** (50 XMG) 2. *** (5 XMG) Unknown (0 XMG) *** (2.5 XMG) *** (2.501 XMG) It looks like POS. But 100XMG only generates 0.01 XMG... All the minted XMG in the wallet is small around 0.01XMG. Is that normal? Some transaction is for 190xmg and it only minted 0.04XMG...
|
|
|
|
jawitech
|
|
February 01, 2015, 10:43:59 PM Last edit: February 01, 2015, 11:12:21 PM by jawitech |
|
Sadly with new miners and the hashrate up I have not found a block in days major wasted resources so until hashrate drops down I think I be turnign miners off for a few days.
Hashrate climbs and drops all day long, so you would have to monitor network hashrate 24/7. There are a few big miners who appear and disappear several times a day and cause this spikes. You are solo mining? The current network hashrate is 19.5 MH/s, but it could be 50 MH/s in an hour, for example. EDIT: And we've again reached 50 MH/s. Thanks djm34 (and some others) for joining...
|
|
|
|
111magic
Legendary
Offline
Activity: 1750
Merit: 1005
|
|
February 02, 2015, 03:56:20 AM |
|
Wow big paycoin dump. Always said invest only in trusted coins. Don't think you buy coins today and gain a lot of money tomorrow. Fair coins like Magi will raise step by step. New investors, new developments, active community and dev will achieve more.
|
bitcoin: bc1qyadvvyv29z08ln2ta7g3uqwzkscr7wq4p09wuz
|
|
|
joelao95 (OP)
Legendary
Offline
Activity: 1190
Merit: 1009
Coin of the Magi!
|
|
February 02, 2015, 06:15:30 AM |
|
Nice done, mate, now figure out how to use finally.
|
|
|
|
joelao95 (OP)
Legendary
Offline
Activity: 1190
Merit: 1009
Coin of the Magi!
|
|
February 02, 2015, 06:21:40 AM |
|
Also I got several small mined transactions Net amount: +0.01 XMG Net amount: +0.001 XMG Are those from POS?
Did you see these from transaction details? Can you identify them in the transaction histroy? Also I saw the 5xmg showed in the "Stake" but none of my sub accounts having balance smaller than that. Will that mean if I keep the wallet open, I will get that by POS later ?
PoS splits coins; it's interesting that only 5XMG in stake? I checked several transanctions minted ~0.001xmg: 1. *** (100 XMG) Unknown (0 XMG) *** (50.01 XMG) *** (50 XMG) 2. *** (5 XMG) Unknown (0 XMG) *** (2.5 XMG) *** (2.501 XMG) It looks like POS. But 100XMG only generates 0.01 XMG... All the minted XMG in the wallet is small around 0.01XMG. Is that normal? Some transaction is for 190xmg and it only minted 0.04XMG... Yes, I would say that's normal. The PoS is designed not using hype interest; though that will get more people going for staking, I don't think that's good to go. Provided XMG price is like BTC, that amount of stake is quite normal; though this assumption is far more than a reality, but what's going on is about right in my view.
|
|
|
|
joelao95 (OP)
Legendary
Offline
Activity: 1190
Merit: 1009
Coin of the Magi!
|
|
February 02, 2015, 06:35:15 AM |
|
Sadly with new miners and the hashrate up I have not found a block in days major wasted resources so until hashrate drops down I think I be turnign miners off for a few days.
Hashrate climbs and drops all day long, so you would have to monitor network hashrate 24/7. There are a few big miners who appear and disappear several times a day and cause this spikes. You are solo mining? The current network hashrate is 19.5 MH/s, but it could be 50 MH/s in an hour, for example. EDIT: And we've again reached 50 MH/s. Thanks djm34 (and some others) for joining... Yes, the hashrate just fluctuates a lot which is very much because of the wildly varying difficulty. I don't think hashrate will keep rising though it does be high in the past two days; it will be back at some point most likely. Notice the payout after 25.01.2015 and 24.01.2015 from the following site (the site is really nice): http://xmg.makejar.com/xmg-per-day/If you don't want lose opportunity when block reward back to high, finding a pool and investing some hash might be a good option.
|
|
|
|
art4free81
Newbie
Offline
Activity: 9
Merit: 0
|
|
February 02, 2015, 07:26:40 AM |
|
i have AMD A10, is that fair enough to mine XMG?
No worth of mining with AMD A10. Sure dude come to this pool https://pow.magipool.info/ you will be in top 15 miners with that cpu. No one is mining XMG for what is worth right now or to earn some quick buck we all mine to support this coin and to have some when this coin grow in future. yow dude, i've already registered on your pool..but with the speed i have. it just running on 4KHs/s. is that something i missed? or with the AMD A10 just got that speed? can you give me the proper setting for the bat file? (sorry for my bad english) my setup minerd.exe -o stratum+tcp://stratum.magipool.info:3334 -u username.worker -p pass -t 5, i'm using Marcus De script my core spec AMD A10 6800K
|
|
|
|
z0n0
Legendary
Offline
Activity: 1274
Merit: 1006
|
|
February 02, 2015, 08:31:39 AM |
|
i have AMD A10, is that fair enough to mine XMG?
No worth of mining with AMD A10. Sure dude come to this pool https://pow.magipool.info/ you will be in top 15 miners with that cpu. No one is mining XMG for what is worth right now or to earn some quick buck we all mine to support this coin and to have some when this coin grow in future. yow dude, i've already registered on your pool..but with the speed i have. it just running on 4KHs/s. is that something i missed? or with the AMD A10 just got that speed? can you give me the proper setting for the bat file? (sorry for my bad english) my setup minerd.exe -o stratum+tcp://stratum.magipool.info:3334 -u username.worker -p pass -t 5, i'm using Marcus De script my core spec AMD A10 6800K I think you should get much better speed with A10, 4kh/s is way too low try this miner https://www.dropbox.com/s/ydk8z59wwgysh1e/Spexx-Wolf0-V2-generic-Win64-XMGminerd.zipchange to -t 3 (or -t 4 full speed)
|
|
|
|
eule
|
|
February 02, 2015, 08:59:32 AM |
|
Ooooo let's all have a CUDA miner available to us. That will ensure that we can increase our carbon footprint while mining for bugger-all.
#facepalm
When will people realize that over-mining XMG decreases the block reward? It used to be a minimum value, but now it can be zero.
Answer: Probably never. I have been banging on about it for months.
At what nethashrate will the block reward go to 0?
|
|
|
|
art4free81
Newbie
Offline
Activity: 9
Merit: 0
|
|
February 02, 2015, 09:31:48 AM |
|
i have AMD A10, is that fair enough to mine XMG?
No worth of mining with AMD A10. Sure dude come to this pool https://pow.magipool.info/ you will be in top 15 miners with that cpu. No one is mining XMG for what is worth right now or to earn some quick buck we all mine to support this coin and to have some when this coin grow in future. yow dude, i've already registered on your pool..but with the speed i have. it just running on 4KHs/s. is that something i missed? or with the AMD A10 just got that speed? can you give me the proper setting for the bat file? (sorry for my bad english) my setup minerd.exe -o stratum+tcp://stratum.magipool.info:3334 -u username.worker -p pass -t 5, i'm using Marcus De script my core spec AMD A10 6800K I think you should get much better speed with A10, 4kh/s is way too low try this miner https://www.dropbox.com/s/ydk8z59wwgysh1e/Spexx-Wolf0-V2-generic-Win64-XMGminerd.zipchange to -t 3 (or -t 4 full speed) thank you bro...my speed 30KHs/s now...i don't know if it was normal for A10 or not... May God speed MAGI...lol.. i will do some research
|
|
|
|
hefty
|
|
February 02, 2015, 09:52:47 AM |
|
A10-6800 is 10 - 11 khs per core same as phenoms
t 4 - 40-44khs
with spexx last miner
|
|
|
|
killbillkill
Newbie
Offline
Activity: 5
Merit: 0
|
|
February 02, 2015, 10:43:37 AM |
|
hello, fist post i have 105~110 kh/s with amd 8320 overclocked to 4500, is it good enough ?
|
|
|
|
hefty
|
|
February 02, 2015, 11:15:33 AM |
|
more than good
|
|
|
|
Mergesort
|
|
February 02, 2015, 11:38:44 AM |
|
hello, fist post i have 105~110 kh/s with amd 8320 overclocked to 4500, is it good enough ? How many cores do you have? I got a intel quadcore overclocked to 4,5 too but only get 65khs/s
|
|
|
|
killbillkill
Newbie
Offline
Activity: 5
Merit: 0
|
|
February 02, 2015, 11:58:31 AM |
|
hello, fist post i have 105~110 kh/s with amd 8320 overclocked to 4500, is it good enough ? How many cores do you have? I got a intel quadcore overclocked to 4,5 too but only get 65khs/s amd 8320 is 8 core cpu and my ram is 16gb. but this score is on ubuntu mate 14.10 (64bit). in windows 7 64bit i have only 75~80 kh/s.... but it is ok i love linux
|
|
|
|
hefty
|
|
February 02, 2015, 12:05:40 PM Last edit: March 24, 2015, 01:43:13 PM by hefty |
|
hello, fist post i have 105~110 kh/s with amd 8320 overclocked to 4500, is it good enough ? How many cores do you have? I got a intel quadcore overclocked to 4,5 too but only get 65khs/s amd 8320 is 8 core cpu and my ram is 16gb. but this score is on ubuntu mate 14.10 (64bit). in windows 7 64bit i have only 75~80 kh/s.... but it is ok i love linux i get 104khs on win 8.1 64 bit with 8320, 13 per core intel 4960X 6 cores 12 threads 128 khs thats max at 4.8 both what intel cpu do you have
|
|
|
|
z0n0
Legendary
Offline
Activity: 1274
Merit: 1006
|
|
February 02, 2015, 12:35:21 PM |
|
hello, fist post i have 105~110 kh/s with amd 8320 overclocked to 4500, is it good enough ? How many cores do you have? I got a intel quadcore overclocked to 4,5 too but only get 65khs/s amd 8320 is 8 core cpu and my ram is 16gb. but this score is on ubuntu mate 14.10 (64bit). in windows 7 64bit i have only 75~80 kh/s.... but it is ok i love linux Do you have problems with overheating CPU and clock dropping?
|
|
|
|
Mergesort
|
|
February 02, 2015, 12:41:23 PM |
|
hello, fist post i have 105~110 kh/s with amd 8320 overclocked to 4500, is it good enough ? How many cores do you have? I got a intel quadcore overclocked to 4,5 too but only get 65khs/s amd 8320 is 8 core cpu and my ram is 16gb. but this score is on ubuntu mate 14.10 (64bit). in windows 7 64bit i have only 75~80 kh/s.... but it is ok i love linux i get 104khs on win 8.1 64 bit with 8320, 13 per core intel 4790k 4 cores 8 threads 128 khs thats max at 4.8 both what intel cpu do you have I got a i5 2500k at 4,5 ghz, temps are no big problem, i got good cooling.
|
|
|
|
killbillkill
Newbie
Offline
Activity: 5
Merit: 0
|
|
February 02, 2015, 01:03:08 PM |
|
hello, fist post i have 105~110 kh/s with amd 8320 overclocked to 4500, is it good enough ? How many cores do you have? I got a intel quadcore overclocked to 4,5 too but only get 65khs/s amd 8320 is 8 core cpu and my ram is 16gb. but this score is on ubuntu mate 14.10 (64bit). in windows 7 64bit i have only 75~80 kh/s.... but it is ok i love linux i get 104khs on win 8.1 64 bit with 8320, 13 per core intel 4790k 4 cores 8 threads 128 khs thats max at 4.8 both what intel cpu do you have I got a i5 2500k at 4,5 ghz, temps are no big problem, i got good cooling. no overheating CPU, i got good cooling too. but i dont care for win. 99,9% of my time i use linux. so i got from: amd athlon 3850 win 64bit, ~15kh/s Intel Cerelon N2830 linux 64bit, ~ 20kh/s amd 8320 linux 64bit, ~75kh/s on 3500ghz, or 105~115kh/s overclocking 4500ghz
|
|
|
|
FedeOmoto
Newbie
Offline
Activity: 6
Merit: 0
|
|
February 02, 2015, 04:38:49 PM |
|
Hi!
Any ETA when the new Magi site will be available?
|
|
|
|
|