[ANN] [XMG] MAGI | CPU mining | mPoW | mPoS | [MagiPay]

[taseigerku]

i wonder why volume xmg in cryptopia so low??only 2.5btc

[buckonz]

Sorry... what do you mean by "run"?  Do I simply type "./m-wallet" while I'm sitting in the directory structure where the file is (being ~/m-wallet-1.4.5.1-linux/bin/32)?

And assuming I can get it running, how do I then "close" the wallet? If it's a GUI programme, I shouldn't have an issue, but assuming it's command line, what command should I use to close it?

I made a couple of attempts to give this a go, without much luck:

odroid@odroid:~/m-wallet-1.4.5.1-linux/bin/32$ ./m-wallet
bash: ./m-wallet: cannot execute binary file: Exec format error

odroid@odroid:~/m-wallet-1.4.5.1-linux/bin/32$ m-wallet
bash: m-wallet: command not found

odroid@odroid:~/m-wallet-1.4.5.1-linux/bin/32$ sudo ./m-wallet
[sudo] password for odroid:
./m-wallet: 1: ./m-wallet: Syntax error: word unexpected (expecting ")")

odroid@odroid:~/m-wallet-1.4.5.1-linux/bin/32$ sudo m-wallet
sudo: m-wallet: command not found

[kyk0]

1. Run the m-wallet with ~$ ./m-wallet. This will create a hidden .magi folder in your home directory
2. Close the wallet
3. Copy the unzipped contents of m-blockchain into this .magi folder
4. Run ~$ ./m-wallet again. Allow it to sync the blockchain. Once it is synced you can perform transactions and staking with the wallet.

Sorry... what do you mean by "run"?  Do I simply type "./m-wallet" while I'm sitting in the directory structure where the file is (being ~/m-wallet-1.4.5.1-linux/bin/32)?

And assuming I can get it running, how do I then "close" the wallet? If it's a GUI programme, I shouldn't have an issue, but assuming it's command line, what command should I use to close it?

You can run it with by typing "~/m-wallet-1.4.5.1-linux/bin/32/m-wallet" no matter what directory you are in.

It's a GUI program.

[technocamel]

Was wondering if anyone is using Cryptotastic.net for their pool?? Seems like a cool idea.

[svedex]

has anyone had some contact with xpoolx support? I contacted them regarding my missing 34 xmg and all they sent me was this:

"Hi Svedex

Magi network is under attack. Your transactions will arrive when the hard fork.

Sorry inconveniences."

that was 2 days ago..... i got one transaction from them this morning but it's only 1 xmg....

I see they work, I see they're mining but just wanna see if someone had this issue and how should i proceed.

I sent my coins on Jan 2nd, but there's no info on the TX ID.

[SolsticeFV]

Was wondering if anyone is using Cryptotastic.net for their pool?? Seems like a cool idea.

I am.So far the guy running it has been helpful and has been paying out on schedule. He helped me figure out why my miner wasnt working in his chat.

[svedex]

isee low hashrate on this pool. http://pool.mineproject.ru has 24+mhs, a lot more miners are there

Was wondering if anyone is using Cryptotastic.net for their pool?? Seems like a cool idea.

[111magic]

I haven't yet compiled wallet for different OS but would like to mention an Update to v1.4.5.2 with min protocol version elevated. This is not mandatory as long as v1.4.5.1 is already running:

https://github.com/magi-project/magi

Thanks for sharing Joe!

[Jeremy450]

Can anyone help me get back my 143xmg from Bittrex? Bittriex havent replied to support ticket. Having trouble with verification and want to get my coins back. If i cant all my hard mining is gone

[buckonz]

You can run it with by typing "~/m-wallet-1.4.5.1-linux/bin/32/m-wallet" no matter what directory you are in.

It's a GUI program.

Thanks. But you're not going to believe this, after restarting my XU4, the Ubuntu installation now all in Chinese (I think).  I have found a couple of articles that talk about editing a couple of files and rebooting, but I don't seem to be able to do this. Looks like I'm re-imaging my XU4 and starting again...

[m1a89]

Hello,

i have a question about solo mining. I have configured my wallet conf like this:

daemon=1
server=1
listen=1
rpcport=8232
rpcallowip=127.0.0.1
rpcuser=user
rpcpassword=pass

Everything works out fine, i can connect and start solo mining. Every hour or so i get an windows notification about incomming transactions but they never show up in the wallet. Is there somethin i am doing wrong?

Image: https://ibb.co/nKhvMb

thank you in advance  

[bullmining]

Request for all working pools!!
Please quote this post & add working pool in it!
That way i can see what pool i need to contact to inform about new releases. Thanks in advance.

https://xmg.bullmining.com -> Wallet has been updated at Bulllmining.com. Pool is running well.

Only 700 Blocks left until the hard fork occurs!

[starmman]

Hey - I know nobody is really using it right now due to the management change - but does anybody know if the Nova Exchance wallet has been / will be updated?

If they get back on track, they could be running on the old chain...

[buckonz]

You can run it with by typing "~/m-wallet-1.4.5.1-linux/bin/32/m-wallet" no matter what directory you are in.

It's a GUI program.

So, I have reimaged by XU4, downloaded the M-Wallet and extracted the files. I have moved them to a slightly more "user friendly" location for getting too.

Anyway, I still can't get this thing to run.  Here are some of the commands I tried with no luck:

odroid@odroid:~$ ~/m-wallet-1451/bin/32/m-wallet
bash: /home/odroid/m-wallet-1451/bin/32/m-wallet: cannot execute binary file: Exec format error

odroid@odroid:~$ sudo ~/m-wallet-1451/bin/32/m-wallet
[sudo] password for odroid:
/home/odroid/m-wallet-1451/bin/32/m-wallet: 1: /home/odroid/m-wallet-1451/bin/32/m-wallet: Syntax error: word unexpected (expecting ")")

odroid@odroid:~$ "~/m-wallet-1451/bin/32/m-wallet"
bash: ~/m-wallet-1451/bin/32/m-wallet: No such file or directory

What am I doing wrong?

[ex33s]

You can run it with by typing "~/m-wallet-1.4.5.1-linux/bin/32/m-wallet" no matter what directory you are in.

It's a GUI program.

So, I have reimaged by XU4, downloaded the M-Wallet and extracted the files. I have moved them to a slightly more "user friendly" location for getting too.

Anyway, I still can't get this thing to run.  Here are some of the commands I tried with no luck:

odroid@odroid:~$ ~/m-wallet-1451/bin/32/m-wallet
bash: /home/odroid/m-wallet-1451/bin/32/m-wallet: cannot execute binary file: Exec format error

odroid@odroid:~$ sudo ~/m-wallet-1451/bin/32/m-wallet
[sudo] password for odroid:
/home/odroid/m-wallet-1451/bin/32/m-wallet: 1: /home/odroid/m-wallet-1451/bin/32/m-wallet: Syntax error: word unexpected (expecting ")")

odroid@odroid:~$ "~/m-wallet-1451/bin/32/m-wallet"
bash: ~/m-wallet-1451/bin/32/m-wallet: No such file or directory

What am I doing wrong?

Odriod is ARM cpu arch right?

If so then the x86 compiled programs won't work. Then you need to compile the wallet for ARM

[buckonz]

You can run it with by typing "~/m-wallet-1.4.5.1-linux/bin/32/m-wallet" no matter what directory you are in.

It's a GUI program.

So, I have reimaged by XU4, downloaded the M-Wallet and extracted the files. I have moved them to a slightly more "user friendly" location for getting too.

Anyway, I still can't get this thing to run.  Here are some of the commands I tried with no luck:

odroid@odroid:~$ ~/m-wallet-1451/bin/32/m-wallet
bash: /home/odroid/m-wallet-1451/bin/32/m-wallet: cannot execute binary file: Exec format error

odroid@odroid:~$ sudo ~/m-wallet-1451/bin/32/m-wallet
[sudo] password for odroid:
/home/odroid/m-wallet-1451/bin/32/m-wallet: 1: /home/odroid/m-wallet-1451/bin/32/m-wallet: Syntax error: word unexpected (expecting ")")

odroid@odroid:~$ "~/m-wallet-1451/bin/32/m-wallet"
bash: ~/m-wallet-1451/bin/32/m-wallet: No such file or directory

What am I doing wrong?

I did a bit of research and found that sometimes that 'Exec format error' can occur when you are trying to run the wrong type of programe (i.e. you are trying to run the 32-bit on a 64-bit platform).  So I changed the command to try and run 'm-wallet' in the 64 directory - this is what happened:

odroid@odroid:~$ sudo ~/m-wallet-1451/bin/64/m-wallet
/home/odroid/m-wallet-1451/bin/64/m-wallet: 1: /home/odroid/m-wallet-1451/bin/64/m-wallet: �
: not found
/home/odroid/m-wallet-1451/bin/64/m-wallet: 1: /home/odroid/m-wallet-1451/bin/64/m-wallet: : not found
/home/odroid/m-wallet-1451/bin/64/m-wallet: 2: /home/odroid/m-wallet-1451/bin/64/m-wallet: p�
p
                   p
                      ��TT@T@DD: not found
/home/odroid/m-wallet-1451/bin/64/m-wallet: 1: /home/odroid/m-wallet-1451/bin/64/m-wallet: : not found
/home/odroid/m-wallet-1451/bin/64/m-wallet: 1: /home/odroid/m-wallet-1451/bin/64/m-wallet: ELF

: not found
/home/odroid/m-wallet-1451/bin/64/m-wallet: 13: /home/odroid/m-wallet-1451/bin/64/m-wallet: Syntax error: "(" unexpected

Keep in mind that the Odroid XU4 is an ARM processor - the primary one being a Cortex A15:
http://www.hardkernel.com/main/products/prdt_info.php?g_code=G143452239825
https://developer.arm.com/products/processors/cortex-a/cortex-a15

I've also seen references to "commits".  Do I need to do this before trying to run 'm-wallet'?

[edward0181]

Yes, is ARM. So you'll need to compile wallet with ARM

[buckonz]

Yes, is ARM. So you'll need to compile wallet with ARM

This is something I suspected. So what is the process for "compiling"? I believe I know the best CFLAGS to use for my processor type, as per this article:
https://www.phoronix.com/scan.php?page=news_item&px=MTI0MjI

And there's this one:
https://gcc.gnu.org/onlinedocs/gcc/ARM-Options.html

[Ginzink]

Can anyone help me get back my 143xmg from Bittrex? Bittriex havent replied to support ticket. Having trouble with verification and want to get my coins back. If i cant all my hard mining is gone

Hi,

If it is verification because you lost two factor or password it will take time, but eventually it will be solved. For me it took less than a week to fix two factor, but then i provided all the necesary documentation up front which saved time.
If coins were sendt to wrong address you probably will not get it back unfortunately. In crypto we are responsible for our own mistakes.

[edward0181]

Yes, is ARM. So you'll need to compile wallet with ARM

This is something I suspected. So what is the process for "compiling"? I believe I know the best CFLAGS to use for my processor type, as per this article:
https://www.phoronix.com/scan.php?page=news_item&px=MTI0MjI

And there's this one:
https://gcc.gnu.org/onlinedocs/gcc/ARM-Options.html

Check what architecture you have with uname -a

then just compile with make -f makefile.unix xCPUARCH=armv6l
or whatever CPUARCH you have