[∞ YH] solo.ckpool.org 2% fee solo mining USA/DE 255 blocks solved!

[Nthused]

I've just realised that I rented a EU Rig and put it on the DE server, then tried to connect my personal miners up to the US server but got Authentication failed, so I tried the DE port and it works...

Can you only have your workers running on one pool ?

DE ping would be worse for my personal rigs then US ping as I am in AUS.

No, they should work anywhere.

This is very weird, I can connect to DE and HK servers with both of the ports but I can't connect to the US server as it says the same thing... DDoS on the US server ?

[-ck]

I've just realised that I rented a EU Rig and put it on the DE server, then tried to connect my personal miners up to the US server but got Authentication failed, so I tried the DE port and it works...

Can you only have your workers running on one pool ?

DE ping would be worse for my personal rigs then US ping as I am in AUS.

No, they should work anywhere.

This is very weird, I can connect to DE and HK servers with both of the ports but I can't connect to the US server as it says the same thing... DDoS on the US server ?

Nope, all quiet as far as I can see. Check your settings as the most likely thing is a syntax issue.

[Nthused]

I've just realised that I rented a EU Rig and put it on the DE server, then tried to connect my personal miners up to the US server but got Authentication failed, so I tried the DE port and it works...

Can you only have your workers running on one pool ?

DE ping would be worse for my personal rigs then US ping as I am in AUS.

No, they should work anywhere.

This is very weird, I can connect to DE and HK servers with both of the ports but I can't connect to the US server as it says the same thing... DDoS on the US server ?

Nope, all quiet as far as I can see. Check your settings as the most likely thing is a syntax issue.

I've tried my other miner on my other computer and I am getting the same problem, yesterday it was fine with the US server, apparently its failing verification yet the config works on the other 2 server locations.

[-ck]

I've just realised that I rented a EU Rig and put it on the DE server, then tried to connect my personal miners up to the US server but got Authentication failed, so I tried the DE port and it works...

Can you only have your workers running on one pool ?

DE ping would be worse for my personal rigs then US ping as I am in AUS.

No, they should work anywhere.

This is very weird, I can connect to DE and HK servers with both of the ports but I can't connect to the US server as it says the same thing... DDoS on the US server ?

Nope, all quiet as far as I can see. Check your settings as the most likely thing is a syntax issue.

I've tried my other miner on my other computer and I am getting the same problem, yesterday it was fine with the US server, apparently its failing verification yet the config works on the other 2 server locations.

Sorry, no idea as there's no reason you wouldn't be able to connect to one and not the other pools with the same credentials unless you had a communication issue somewhere between you and solo. As you're in AUS, hk would be your closest server anyway.

[Nthused]

I've just realised that I rented a EU Rig and put it on the DE server, then tried to connect my personal miners up to the US server but got Authentication failed, so I tried the DE port and it works...

Can you only have your workers running on one pool ?

DE ping would be worse for my personal rigs then US ping as I am in AUS.

No, they should work anywhere.

This is very weird, I can connect to DE and HK servers with both of the ports but I can't connect to the US server as it says the same thing... DDoS on the US server ?

Nope, all quiet as far as I can see. Check your settings as the most likely thing is a syntax issue.

I've tried my other miner on my other computer and I am getting the same problem, yesterday it was fine with the US server, apparently its failing verification yet the config works on the other 2 server locations.

Sorry, no idea as there's no reason you wouldn't be able to connect to one and not the other pools with the same credentials unless you had a communication issue somewhere between you and solo. As you're in AUS, hk would be your closest server anyway.

Hmmm, I might reset my internet & router later on to give it a fresh connection, I haven't done that since last year

I just tested the pings from here to HK, US, DE servers & you are right HK is the quickest, thanks -ck I will use that from now on for my personal *Luck* rigs

Also I have noticed that my best share ever has been reset & it shows hashrate equal to what is pointed to it but 0 workers, does this sound right ?

EDIT: Ahh I just realised I was looking at solo.ckpool.org stats & didn't click on that it is individual server stats.

[-ck]

Also I have noticed that my best share ever has been reset & it shows hashrate equal to what is pointed to it but 0 workers, does this sound right ?

EDIT: Ahh I just realised I was looking at solo.ckpool.org stats & didn't click on that it is individual server stats.

No, stats are now all shared to solo. However no stats prior to yesterday were carried over as I said in my announcement.

[firetreeactual]

Well...I've only got a couple more days before my solo mining jaunt must move back to pool mining. Moving Dopey and Grumpy (S3s) to hk. That's all of 'em.

Imua...

[Nthused]

Also I have noticed that my best share ever has been reset & it shows hashrate equal to what is pointed to it but 0 workers, does this sound right ?

EDIT: Ahh I just realised I was looking at solo.ckpool.org stats & didn't click on that it is individual server stats.

No, stats are now all shared to solo. However no stats prior to yesterday were carried over as I said in my announcement.

I must of missed that sorry, also just a question but are all the servers individual pools because when I check I see total hashrate is different for them all ?

[-ck]

I must of missed that sorry, also just a question but are all the servers individual pools because when I check I see total hashrate is different for them all ?

They're all individual pools but solo has the combined hashes from all of them though of course the "pool" hashrates are totally meaningless to solo miners.

[-ck]

I've identified a memory leak which affects the solo pools and I will be restarting solo and de shortly to fix them - hk has already been restarted. As always downtime should be minimal.

EDIT: Solo restarted. Waiting 5 mins for people to fall back from de to solo before I restart de.

All complete. I saw some of you bounce from one solo pool to another and then back again. Sorry about any inconvenience.

In addition there are some changes to the pool which allow some very old incompatible bitfury miners now work on solo.

Mine on!

[kilo17]

I've identified a memory leak which affects the solo pools and I will be restarting solo and de shortly to fix them - hk has already been restarted. As always downtime should be minimal.

EDIT: Solo restarted. Waiting 5 mins for people to fall back from de to solo before I restart de.

All complete. I saw some of you bounce from one solo pool to another and then back again. Sorry about any inconvenience.

In addition there are some changes to the pool which allow some very old incompatible bitfury miners now work on solo.

Mine on!

I just loaded up 2 Ph for a couple of hours on de - do i need to switch?

edit- nevermind, i see that was a little while ago

[kilo17]

I am hashing on de solo and my stats are present on both solo and de.solo yet my "best share" has increased on the solo and not on the de.solo.

Why is that?

[philipma1957]

I am hashing on de solo and my stats are present on both solo and de.solo yet my "best share" has increased on the solo and not on the de.solo.

Why is that?

it is a bug.  I have had same issue.

[-ck]

I am hashing on de solo and my stats are present on both solo and de.solo yet my "best share" has increased on the solo and not on the de.solo.

Why is that?

I'm moving all stats to solo over time and will be removing the local webstats completely.

[kilo17]

I am hashing on de solo and my stats are present on both solo and de.solo yet my "best share" has increased on the solo and not on the de.solo.

Why is that?

I'm moving all stats to solo over time and will be removing the local webstats completely.

Thanks

[Xunknown]

I've just realised that I rented a EU Rig and put it on the DE server, then tried to connect my personal miners up to the US server but got Authentication failed, so I tried the DE port and it works...

Can you only have your workers running on one pool ?

DE ping would be worse for my personal rigs then US ping as I am in AUS.

No, they should work anywhere.

This is very weird, I can connect to DE and HK servers with both of the ports but I can't connect to the US server as it says the same thing... DDoS on the US server ?

Nope, all quiet as far as I can see. Check your settings as the most likely thing is a syntax issue.

I've seen this error as well.  Seems to be happening since the combined stats on the main pool.  I believe it's caused by using the same user/worker name on both pools.  Change solo to a new address and you will connect instantly.

X

[Nthused]

I've just realised that I rented a EU Rig and put it on the DE server, then tried to connect my personal miners up to the US server but got Authentication failed, so I tried the DE port and it works...

Can you only have your workers running on one pool ?

DE ping would be worse for my personal rigs then US ping as I am in AUS.

No, they should work anywhere.

This is very weird, I can connect to DE and HK servers with both of the ports but I can't connect to the US server as it says the same thing... DDoS on the US server ?

Nope, all quiet as far as I can see. Check your settings as the most likely thing is a syntax issue.

I've seen this error as well.  Seems to be happening since the combined stats on the main pool.  I believe it's caused by using the same user/worker name on both pools.  Change solo to a new address and you will connect instantly.

X

Indeed you are right, I just changed my username (BTC Address) on one of my rentals & it is now connecting to the US server.

[madmartyk]

I'm getting an error on MRR for the US pool.  It failed over to the DE pool with no issues.  Any ideas??

[madmartyk]

I'm getting an error on MRR for the US pool.  It failed over to the DE pool with no issues.  Any ideas??

Seems to be OK now.

[727miner]

I'm getting an error on MRR for the US pool.  It failed over to the DE pool with no issues.  Any ideas??

Seems to be OK now.

For me, my home miners had failed over to the de pool sometime overnight and all showed the US pool as dead. I restarted them with a different btc address and they are now back on the US solo pool.