CCminer(SP-MOD) Modded GPU kernels.

[pokeytex]

Sp-mod #6 is ready to send.

This build is tweaked for the 750ti, and might run slower than #5 on compute 5.2 and up

Hashrates (asus strix 750ti 1275-1290 boostclock) (KHASH/s) (default intensities).


Differences from sp-mod #5:

keccak: 163200(142770) +14.3%
skein: 85400 (new)
nist5: 9620(9500) +1.2%
quark: 6322 (6300) +0.3%
lyra2v2: 4640(4610) +0.65%
x11: 3062(3017) +1.5%
x13: 2340 (2376)
x14: 2280 (new)
x15: 2010 (2045)
lyra2: 1072

Edit: The windows exe file have been sendt.
Edit2: x13 and x15 seems to be slower.

@SP - I didn't receive the release.  Please forward to my email address used previously.  Thanks - pokeytex

I see you have the penta, spreadcoin and decred+vanilla. but not the all nicehashalgos optimized? I will give you a nice discount on the sp-mod ultimate when it is ready.

Ah - ok  - my confusion.  Sorry.

[sp_]

SP-MOD private #6:
Keccak: The gtx gigabyte gforce 970 is getting 470MHASH on the gb g1 gaming on standard clocks.
Release 79 opensource  is only doing around 380.

So why do I spend time to optimize keccak.. The answer is Etherum dual mining..

Happy hashing.

[bathrobehero]

SP-MOD private #6:
Keccak: The gtx gigabyte gforce 970 is getting 470MHASH on the gb g1 gaming on standard clocks.
Release 79 opensource  is only doing around 380.

So why do I spend time to optimize keccak.. The answer is Etherum dual mining..

Happy hashing.

The older releases of yours (r6x) are doing keccak very close to 500 Mh/s with some OC. It's just got slowed down for some reason in newer releases but nobody noticed it.

[sp_]

The older releases of yours (r6x) are doing keccak very close to 500 Mh/s with some OC. It's just got slowed down for some reason in newer releases but nobody noticed it.

ofcourse. Why don't you test the speed of the Putin miner (keccak):

https://github.com/alexis78/ccminer

[tbearhere]

there is a way to change back the p state from 0 to 2 without using nvidia inspector? with command prompt for example?

I found   --pstate=0  to set clocks to the p0 state.....but I haven't tried it yet.

If there is that  --pstate=0 then maybe there is   --pstate=2 which is what my 980ti and 970gtx are running at right now.
Remember I found this on the readme docs and I haven't tried it yet.

EDIT:Also   --keep-clocks   prevents clocks from resetting.

[crysx]

i have yet to receive anything also sp ...
same as usual? ... just email me and ill do the rest from there ...
#crysx

No linux version. Do you still want the windows exe?

no linux version? ...
so what happened with the linux version? ...

There has never been a linux version of the x11 series/lyra2v2 and quark and you know it.
I am working on the sp-mod ultimate, and I might build a linux version when it's done. If you see my opensource I have added some optimalizations to the code, so I had to give something to the donators.  The difference between the sp-mod private and the opensource is just a few percent. And the opensource is getting faster and faster..

ok sp ...

i know what needs to be done ...

tanx ...

btw - the opensource IS faster - you are right ... only by a small fraction - but it is faster ...

ill always be upset by the fact there is no linux version ... especially now that ive begun the worlds first grid mining system ( and when i get an inhouse dev - we will also have the first hpc miner for thegrid / thefarm also ) ...

pity - i believed from the conversations you were going to release one ...

btw - yes - i would like the windows version to test ...

tanx ...

#crysx

[PVmining]

ofcourse. Why don't you test the speed of the Putin miner (keccak):

https://github.com/alexis78/ccminer

Fxxxing slow. Poor programming..

sp_ http://www.aa.org/ ...they will help you.

[Amph]

there is a way to change back the p state from 0 to 2 without using nvidia inspector? with command prompt for example?

I found   --pstate=0  to set clocks to the p0 state.....but I haven't tried it yet.

If there is that  --pstate=0 then maybe there is   --pstate=2 which is what my 980ti and 970gtx are running at right now.
Remember I found this on the readme docs and I haven't tried it yet.

EDIT:Also   --keep-clocks   prevents clocks from resetting.

use ths command nvidia-smi -rac

[kahir]

he Quark and Qubit crypto algorithms continue to be quite profitable, but until recently these algorithms were mostly in the Nvidia domain as the ccMiner for Nvidia GPUs was faster than the available performance on AMD hardware. There is however a new sgminer fork with compiled Quark and Qubit kernels that was sent to us that brings up the hashrate significantly on Pitcairn and Tahiti AMD GPUs. We have tested this particular sgminer on a Radeon R9 280X and we are getting about 11.22 MHS on Quark with a non overclocked GPU and about 12.3 MHS on Qubit and you can get higher with OC and increase in the Intensity. Quark is apparently quite profitable at the moment on NiceHash and WestHash due to the interest in SharkCoin or so it seems, so if you have some idle AMD GPUs that you are wondering where to point them there. Do note that the sgminer is not compiled by us and it comes with the standard OpenCL kernel files, so you need to use the binaries for the higher performance. Since we have not compiled this sgminer from source and it was sent to us already compiled we would recommend to be cautions and not run it on systems with wallets installed, just in case!  ....nvidia rekt  .....
http://cryptomining-blog.com/4819-new-sgminer-with-optimized-quark-and-qubit-kernels/

[Amph]

i have yet to receive anything also sp ...
same as usual? ... just email me and ill do the rest from there ...
#crysx

No linux version. Do you still want the windows exe?

no linux version? ...
so what happened with the linux version? ...

There has never been a linux version of the x11 series/lyra2v2 and quark and you know it.
I am working on the sp-mod ultimate, and I might build a linux version when it's done. If you see my opensource I have added some optimalizations to the code, so I had to give something to the donators.  The difference between the sp-mod private and the opensource is just a few percent. And the opensource is getting faster and faster..

for quark release 80 versus 79 seems 1% faster at least for me

[Velgelm]

SP!
My report:
Private#5 VS Private #6
Cards 960 and 970 NON OC STANDART CLOCK:

[tbearhere]

there is a way to change back the p state from 0 to 2 without using nvidia inspector? with command prompt for example?

I found   --pstate=0  to set clocks to the p0 state.....but I haven't tried it yet.

If there is that  --pstate=0 then maybe there is   --pstate=2 which is what my 980ti and 970gtx are running at right now.
Remember I found this on the readme docs and I haven't tried it yet.

EDIT:Also   --keep-clocks   prevents clocks from resetting.

use ths command nvidia-smi -rac

I'm familiar with nvidia-smi   ........  but  -rac  what is that? What does it do?
Thx

[tbearhere]

he Quark and Qubit crypto algorithms continue to be quite profitable, but until recently these algorithms were mostly in the Nvidia domain as the ccMiner for Nvidia GPUs was faster than the available performance on AMD hardware. There is however a new sgminer fork with compiled Quark and Qubit kernels that was sent to us that brings up the hashrate significantly on Pitcairn and Tahiti AMD GPUs. We have tested this particular sgminer on a Radeon R9 280X and we are getting about 11.22 MHS on Quark with a non overclocked GPU and about 12.3 MHS on Qubit and you can get higher with OC and increase in the Intensity. Quark is apparently quite profitable at the moment on NiceHash and WestHash due to the interest in SharkCoin or so it seems, so if you have some idle AMD GPUs that you are wondering where to point them there. Do note that the sgminer is not compiled by us and it comes with the standard OpenCL kernel files, so you need to use the binaries for the higher performance. Since we have not compiled this sgminer from source and it was sent to us already compiled we would recommend to be cautions and not run it on systems with wallets installed, just in case!  ....nvidia rekt  .....
http://cryptomining-blog.com/4819-new-sgminer-with-optimized-quark-and-qubit-kernels/

At nicehash about 1/2 year ago SHARK coin was paying about .9000 btc per gh.
You can imagine the payout.

[Amph]

there is a way to change back the p state from 0 to 2 without using nvidia inspector? with command prompt for example?

I found   --pstate=0  to set clocks to the p0 state.....but I haven't tried it yet.

If there is that  --pstate=0 then maybe there is   --pstate=2 which is what my 980ti and 970gtx are running at right now.
Remember I found this on the readme docs and I haven't tried it yet.

EDIT:Also   --keep-clocks   prevents clocks from resetting.

use ths command nvidia-smi -rac

I'm familiar with nvidia-smi   ........  but  -rac  what is that? What does it do?
Thx

reset the application clock, it's the opposite of nvidia-smi -ac, which is used to force the p-state to 0

[tbearhere]

ok, i've found how to reset to p2 state without rebooting your computer and without using inspector, just this nvidia-smi -rac

very useful, was a pain in the ass to reset each i need to use other algo, which otherwise would result in a drivers crash with p0 state, like quark...probably due to the high overclock...

I see Amph  Thx

[bensam1231]

Dual miner plz... SP stop messing around with the plebs that don't matter. D:

[scryptr]

BENCHMARK TESTING sp_ PRIVATE #6 --

I recieved my copy of sp_ Private Miner #6 today, and benchmarked it using NiceHash Miner v1.4.0.1.  NiceHash Miner v1.4.0.1 comes standard with sp_ 's v1.79 release of CCminer.  This public version was used as a comparison.  Here are the results:


Benchmark results for sp_ v1.79 (public).


Benchmark results for sp_ Private Miner #6.

Results were obtained using an EVGA 2GB GTX 960 SC card, with clocks +80 core/+ 240 memory.  System is Win 7 x64.       --scryptr

[sp_]

Nice. You run the 750ti miner on a 960.

OMG! Neoscrypt is up 100%!!!

[AzzAz]

Nvidia just announced 1080 will sell for $599 from june. They say it is 2x titanx for VR and 3x efficient than titanx. From the graph looks like for gaming it is 1.5 x faster than 980 and some 1.3 x more power. How it will mine?

[crysx]

Nice. You run the 750ti miner on a 960.

OMG! Neoscrypt is up 100%!!!

sp ...

i still havent got the executable for the windows miner for the latest spmod ...

have you sent? ...

#crysx