CCminer(SP-MOD) Modded GPU kernels.

[grrrgrrr]

it was bound to happen, there were many who bought all the way down from the initial pump

they didn't bought for no reason

LBRY has 1 276 BTC Volume now on the exchanges (more than 1 million dollar in 24hours), and the price keep climbing.

.. Time for you to prepare mod #5 , If you wish miners' fee of course...

spmod #5: cctrader-sp 

[sp_]

ok. Workling on LBRY Sp-mod #5

I get 293-297 witrhout oc on the 1070. 100% powerlimit

[du44]

ok. Workling on LBRY Sp-mod #5

I get 293-297 witrhout oc on the 1070. 100% powerlimit

How with DevFee in 5th version?

[sp_]

How with DevFee in 5th version?

2.5% like in the 4th version.

I will release #5 later today.

[szafa]

This 5 version support lbry algorytm?

[sp_]

This 5 version support lbry algorytm?

Yes. The only supported algorithm.

I have reduced the one time fee to 0.05BTC.

LBRY sp-mod #5 will be a free update to the donators.

[m1n1ngP4d4w4n]

This 5 version support lbry algorytm?

Yes. The only supported algorithm.

I have reduced the one time fee to 0.05BTC.

LBRY sp-mod #5 will be a free update to the donators.

Good news

Question since it's based on ccminer aside modding it you don't remove any features right ? (like API, and stuff)
Also could you provide the numbers for 1070 OCed like i did (60% tdp / 195/-500) to see if the new version will be interesting ?
How does it work for donating it, just transfer to your signature btc and give you the hash TX by pm ?

Thanks  

[sp_]

Good news
Question since it's based on ccminer aside modding it you don't remove any features right ? (like API, and stuff)
Also could you provide the numbers for 1070 OCed like i did (60% tdp / 195/-500) to see if the new version will be interesting ?
How does it work for donating it, just transfer to your signature btc and give you the hash TX by pm ?

Thanks  

I get 310 with +150 on the core and -500 on memory. I just tested the opensource version. LBRY sp-mod #5 seems to be 6% faster on the gtx 1070 (same clocks). So not so much... but on 970 and 1060 there is a big difference. My gainward 970 is hashing +40% faster than the 1.8.4 opensource with sp-mod #5.

[m1n1ngP4d4w4n]

Good news
Question since it's based on ccminer aside modding it you don't remove any features right ? (like API, and stuff)
Also could you provide the numbers for 1070 OCed like i did (60% tdp / 195/-500) to see if the new version will be interesting ?
How does it work for donating it, just transfer to your signature btc and give you the hash TX by pm ?

Thanks  

I get 310 with +150 on the core and -500 on memory. I just tested the opensource version. LBRY sp-mod #5 seems to be 6% faster on the gtx 1070 (same clocks). So not so much... but on 970 and 1060 there is a big difference. My gainward 970 is hashing +40% faster than the 1.8.4 opensource with sp-mod #5.

Ok cool thx for the feedback 6% seems indeed to be a bit on the low side, but ccminer is already very well optimized for pascal, so basically with the fee it's 3.5%+ gain, what about the others questions ? :p

[sp_]

donate to the adress in my signature. and give me your email on pm.

[maxim000]

LBRY sp-mod #5 will be a free update to the donators.

is this free for those who bought #4 earlier ?

[sp_]

LBRY sp-mod #5 will be a free update to the donators.

is this free for those who bought #4 earlier ?

Yes. but 2.5% fee.

[sp_]

Release #5 will be delayed.

[m1n1ngP4d4w4n]

Release #5 will be delayed.

Awww, technical issues ? found a new way to do even better ? come on a little teaser ! Make us dream ! 

[m1n1ngP4d4w4n]

Release #5 will be delayed.

Hey sp_ any news or ETA ? 

[m1n1ngP4d4w4n]

guess not  , hope the sickness haven't returned, bad weather atm 

[sp_]

guess not  , hope the sickness haven't returned, bad weather atm 

I've got some problems with my testrig and the latest driver with the latest modded exe. When I quit the program, the driver crash and the boost clock doesn't work. So I'm stuck with a core clock of only 1500Mhz.

I run without oc.

Works fine when I reboot the rig.

Anyone know how to reset the card without doing a full restart?

[ltc_bilic]

Anyone know how to reset the card without doing a full restart?

I'm using this:

nvidiaInspector -restartDisplayDriver

[thevictimofuktyranny]

guess not  , hope the sickness haven't returned, bad weather atm  

I've got some problems with my testrig and the latest driver with the latest modded exe. When I quit the program, the driver crash and the boost clock doesn't work. So I'm stuck with a core clock of only 1500Mhz.

I run without oc.

Works fine when I reboot the rig.

Anyone know how to reset the card without doing a full restart?

Hello SP_

Certain Nvidia driver releases have these problems when running multi-card rigs (I've come across 2 drivers releases on Windows 10 that had this problem) - so trying older drivers should resolve the issue.

On Windows 10, Installing MSI Afterburner or EVGA Trix reset options.

[m1n1ngP4d4w4n]

guess not  , hope the sickness haven't returned, bad weather atm  

I've got some problems with my testrig and the latest driver with the latest modded exe. When I quit the program, the driver crash and the boost clock doesn't work. So I'm stuck with a core clock of only 1500Mhz.

I run without oc.

Works fine when I reboot the rig.

Anyone know how to reset the card without doing a full restart?

Yeah i indeed got this issue with some drivers and/or some miners, not a big problem, usually i just reboot, 20sec, and it's back mining, nvidia inspector restart driver is also pretty good, but doesn't work 100% of the time. I actually have this problem with most ccminers version i came across, since yours is based on it, im not surprised.