CCminer(SP-MOD) Modded GPU kernels.

[Epsylon3]

Yiimp IP may change again in the next days... im facing a tech problem where my IP is not "static" due to the symetric option...

It's not normal and that explain the recent issues. I'm connected to a national "fallback" BAS which doesnt allow IPv6 and the static IP

[ioglnx]

Yiimp IP may change again in the next days... im facing a tech problem where my IP is not "static" due to the symetric option...

It's not normal and that explain the recent issues. I'm connected to a national "fallback" BAS which doesnt allow IPv6 and the static IP

sounds strange which country is that? Would be good to know and not to rent connection there or place datacenter :-D

[Epsylon3]

Orange ... or France Telecom :p Well their hardware works, but its a brand new one, and the fiber customer are rare for the moment.

I guess im one of the few who took the 200Mb/s upload option instead of 100 (which is already huge for our country) I had 20 on my previous fiber but the hardware had already 3 years.

Well... in theory there will be no manual reboot except if i call them to fix a "half problem" or if they push a new firmware... The device is on a battery with yiimp server

[nevermind41]

Orange ... or France Telecom :p Well their hardware works, but its a brand new one, and the fiber customer are rare for the moment.

I guess im one of the few who took the 200Mb/s upload option instead of 100 (which is already huge for our country) I had 20 on my previous fiber but the hardware had already 3 years.

Well... in theory there will be no manual reboot except if i call them to fix a "half problem" or if they push a new firmware... The device is on a battery

http://yiimp.ccminer.org/ isn't accessible for me right now. If it is online, Can you share the ip adress?

[Epsylon3]

"To be sure of that, i had to manually reboot the device several times...

so prefer http://mine.gpu4u.eu/ which is updated faster"

Yes sorry, i posted more infos in my ccminer thread ;p

[gerando]

LBRY Sp-mod #5..

http://i65.tinypic.com/2qx3u37.png

lol@speed
http://imgur.com/qCxzBy0

and now what you wanna candy? No info what hardware not any useful proof of anything.

Just pointed out sp "improvements". 308 mh/s at 2075 mhz core is definitely exceptional result. What additional information would you prefer to see?

[m1n1ngP4d4w4n]

LBRY Sp-mod #5..

lol@speed
http://imgur.com/qCxzBy0

and now what you wanna candy? No info what hardware not any useful proof of anything.

Just pointed out sp "improvements". 308 mh/s at 2075 mhz core is definitely exceptional result. What additional information would you prefer to see?

Could you post your current TDP %, nvidia SMI watts, watts @ wall, and your overclock ?

[jonesskill]

can you release the decred one free but with dev fees?

[gerando]

Could you post your current TDP %, nvidia SMI watts, watts @ wall, and your overclock ?

Actually you can see all of this on the screenshot. Except power consumption out of the wall, but I don't have wattmeter so can't say.

[bensam1231]

Epsylon fix pascal please... Make the pipes connect to the dongers to feed the bits to the vroom vroom GPUs to make the money tree grow.

[Slava_K]

On low network diff Pascal Cuda miner works good, n0 errors in wallet log, blocks go in wallet  , but when diff is high, only errors in log, no blocks - try this new coin in testnet https://bitcointalk.org/index.php?topic=1773026.new#new
May be bug in proxy part of miner...?

[bughatti]

Team, sorry to repost this in another thread, not getting much traction in the other one.  Has anyone had success getting 6 nvidia gpus working with 2 threads each, if so can you post miner, software/driver ver and config.  I am using 6 asus gtx 1060 3gb cards and when trying sgminer, i have to set thread to 1 so it doesnt error out on config.  I have tried ccminer SP-MOD but cannot remember the error, I am at work now.

[sp_]

Team, sorry to repost this in another thread, not getting much traction in the other one.  Has anyone had success getting 6 nvidia gpus working with 2 threads each, if so can you post miner, software/driver ver and config.  I am using 6 asus gtx 1060 3gb cards and when trying sgminer, i have to set thread to 1 so it doesnt error out on config.  I have tried ccminer SP-MOD but cannot remember the error, I am at work now.

The only way to run the solominer in 2 threads is by using the sp-mod. You need to set up 12 gpu's in the proxy..


I found a block in the pascal lite with the sp-mod #2

Based on pallas opensource.

[joaogti36]

Team, sorry to repost this in another thread, not getting much traction in the other one.  Has anyone had success getting 6 nvidia gpus working with 2 threads each, if so can you post miner, software/driver ver and config.  I am using 6 asus gtx 1060 3gb cards and when trying sgminer, i have to set thread to 1 so it doesnt error out on config.  I have tried ccminer SP-MOD but cannot remember the error, I am at work now.

The only way to run the solominer in 2 threads is by using the sp-mod. You need to set up 12 gpu's in the proxy..


I found a block in the pascal lite with the sp-mod #2

Based on pallas opensource.

found it....
but getting that error Invalid new block 187: Proof of work is higher than target

[sp_]

found it....
but getting that error Invalid new block 187: Proof of work is higher than target

You found #1. #2 is not yet released.


You will get alot of Proof of work is higher than target before you find a block because the target is only with 8 zeros in the hash in the miner.

[bughatti]

Team, sorry to repost this in another thread, not getting much traction in the other one.  Has anyone had success getting 6 nvidia gpus working with 2 threads each, if so can you post miner, software/driver ver and config.  I am using 6 asus gtx 1060 3gb cards and when trying sgminer, i have to set thread to 1 so it doesnt error out on config.  I have tried ccminer SP-MOD but cannot remember the error, I am at work now.

The only way to run the solominer in 2 threads is by using the sp-mod. You need to set up 12 gpu's in the proxy..


I found a block in the pascal lite with the sp-mod #2

Based on pallas opensource.

I apologize for my noobness, but how do I get the sp-mod, is it not part of the download from the beginning of this thread?  Is there reading material so I can get mine setup correctly?

Thanks!

[sp_]

Ok, here is pascalcoin sp-mod #2 (SOLO miner)

enjoy

https://github.com/sp-hash/ccminer/releases/tag/pascal-spmod2

[jonesskill]

Very nice, now we just need to connect to the pool =S

1236 MH/s report running 1card_2threads.bat

That means 2Gh/s?

[joaogti36]

617mhz with a gtx 1060 6gb :|

[sp_]

Very nice, now we just need to connect to the pool =S
1236 MH/s report running 1card_2threads.bat
That means 2Gh/s?

Run it for a while and the speed will drop. Or perhaps the one of the threads has died. This is a beta. abit unstable. Sometimes crash on exit.