ANTMINER U3 Discussion and Support Thread

[dogie]

I can only seem to get either my U3 or new R-box running at a time, and have Zadig'ed many a time. Is there no way to get these running together? I've tried multiple USB hubs, powered and unpowered.

In your own words

Engineering > all.

The designers of both of these devices gave them identical (crap cheap) usb communication chips and have set no identity for manufacturer or product so now about a dozen different devices look identical on the bus. The best cgminer can do is poke it with a stick a few times till it goes ouch in different ways to say "hmm, looks like a frog" and then gives it the rockminer driver. This reliability of this is variable and works in my testing on linux. Perhaps it might work better if you start cgminer with one connected and plug the other one in after since hotplug works slightly differently. Sometimes they dont like to let go of the same USB bus ID so need cold power cycling. I can no longer do any more testing since bitmain sent me 2 U3s and it appears I've fried both of them (hence my warnings earlier on).

I meant engineering department > all, they call the shots - in response that sales and marketing were making engineering do things.

Makes sense on the indentification. I've tried different ports, different hubs and hot plugging, but it seems every time I replug one in it loses Zadig'age.

[heslo]

And as a side note. I bought my unit at MinerSource and I left a review for this item there. I thought I wrote an objective review where I detailed all of the problems I had with the unit, along with compliments for the packaging. It's now clear that MinerSource has no intent or interest in publishing honest reviews, which is disappointing.

...but not unsurprising, they're a bunch of con artists anyway

[CCW]

hi guys,

after reading the whole thread, I decided a few days ego to buy an U3. After starting with U2+ I was thinking it would be time to continue with U3. But unfortunately the setup is not as easy as for the U2. I won't recommend the U3 for beginners.

I use my U3 with the Raspberry pi + cgminer from ckolivas

here a link how to compile the cgminer for raspberry: https://dominustemporis.com/2013/06/compiling-cgminer-for-the-raspberry-pi-and-butterflylabs-jalapeno/

Comment:
I often get errors like https://bitcointalk.org/index.php?topic=854958.0
I solved it with auto-restarting (regular)

[kcal63]

I can only seem to get either my U3 or new R-box running at a time, and have Zadig'ed many a time. Is there no way to get these running together? I've tried multiple USB hubs, powered and unpowered.

In your own words

Engineering > all.

The designers of both of these devices gave them identical (crap cheap) usb communication chips and have set no identity for manufacturer or product so now about a dozen different devices look identical on the bus. The best cgminer can do is poke it with a stick a few times till it goes ouch in different ways to say "hmm, looks like a frog" and then gives it the rockminer driver. This reliability of this is variable and works in my testing on linux. Perhaps it might work better if you start cgminer with one connected and plug the other one in after since hotplug works slightly differently. Sometimes they dont like to let go of the same USB bus ID so need cold power cycling. I can no longer do any more testing since bitmain sent me 2 U3s and it appears I've fried both of them (hence my warnings earlier on).

I meant engineering department > all, they call the shots - in response that sales and marketing were making engineering do things.

Makes sense on the indentification. I've tried different ports, different hubs and hot plugging, but it seems every time I replug one in it loses Zadig'age.

Yeah Dogie, I have found that Bitmain and Rockminer products simply do not play well together. I have never been able to run any form of R-boxes on same computer as a bitmain device, the drivers just are not compatible somehow (even though the controller appears to be identical, go figure).

[CCW]

It is strange.... after trying the antminer u3 with the cgminer for a few hours. the cgminer always crash or the miner became a zombie.

Anyone know how to get rid of the following errors:
GetResults usb read err:(-1) LIBUSB_ERROR_IO
attempted reset got err:(0) LIBUSB_SUCCESS

The longer the device runs the more it appears until the u3 becomes the zombie

[GrrOucH]

I'm sure I'll get yelled at but could someone put the steps up here to install 4.80 on an rpi running minepeon please. Minepeon is not maintained any more for some reason and there was never a walk through done for CGMiner. Thanks.

[Speedster1978]

What would everyone suggest as a good backup power supply to replace the crap one that the Antminer U3 came with? Amazon links if they carry it preferred...

[hawkfish007]

What would everyone suggest as a good backup power supply to replace the crap one that the Antminer U3 came with? Amazon links if they carry it preferred...

Use an ATX PSU with PCIe to barrel plug adapters (5.5X2.5 mm), 5.5x2.1mm (Blizzard/Fury) works but needs a hard push.

[Zich]

What would everyone suggest as a good backup power supply to replace the crap one that the Antminer U3 came with? Amazon links if they carry it preferred...

If you are using pc, you can get power from your pc ATX PSU  

[Speedster1978]

All the ones I am seeing are like $20-30... I'll just have to wire my own up with spare PCI-e plugs I guess

[Phosphorous]

Yeah Dogie, I have found that Bitmain and Rockminer products simply do not play well together. I have never been able to run any form of R-boxes on same computer as a bitmain device, the drivers just are not compatible somehow (even though the controller appears to be identical, go figure).

I actually had an R-Box and 2 Ant U2's running on the same machine for several months. Don't ask me how I did it. I messed with it forever and almost gave up and then it just started working. Again, don't know what I did... I uninstalled and re-installed drivers and Zadig'd and it just started working somehow. Unfortunately it stopped working when I messed with things trying to get the U3 working.

[dogie]

What would everyone suggest as a good backup power supply to replace the crap one that the Antminer U3 came with? Amazon links if they carry it preferred...

6A one from my rockminer guide.

[dogie]

It is strange.... after trying the antminer u3 with the cgminer for a few hours. the cgminer always crash or the miner became a zombie.

Anyone know how to get rid of the following errors:
GetResults usb read err:(-1) LIBUSB_ERROR_IO
attempted reset got err:(0) LIBUSB_SUCCESS

The longer the device runs the more it appears until the u3 becomes the zombie

I was getting this before I put it on a powered hub.

[CCW]

It is strange.... after trying the antminer u3 with the cgminer for a few hours. the cgminer always crash or the miner became a zombie.

Anyone know how to get rid of the following errors:
GetResults usb read err:(-1) LIBUSB_ERROR_IO
attempted reset got err:(0) LIBUSB_SUCCESS

The longer the device runs the more it appears until the u3 becomes the zombie

I was getting this before I put it on a powered hub.

Thanks for the idea. After removing the USB hub the problem is gone. now I only need to figure out why the cgminer suddenly stops mining after a while

[dogie]

It is strange.... after trying the antminer u3 with the cgminer for a few hours. the cgminer always crash or the miner became a zombie.

Anyone know how to get rid of the following errors:
GetResults usb read err:(-1) LIBUSB_ERROR_IO
attempted reset got err:(0) LIBUSB_SUCCESS

The longer the device runs the more it appears until the u3 becomes the zombie

I was getting this before I put it on a powered hub.

Thanks for the idea. After removing the USB hub the problem is gone. now I only need to figure out why the cgminer suddenly stops mining after a while

Have you seen what error it outputs and/or what state it ends up in?

[CCW]

It is strange.... after trying the antminer u3 with the cgminer for a few hours. the cgminer always crash or the miner became a zombie.

Anyone know how to get rid of the following errors:
GetResults usb read err:(-1) LIBUSB_ERROR_IO
attempted reset got err:(0) LIBUSB_SUCCESS

The longer the device runs the more it appears until the u3 becomes the zombie

I was getting this before I put it on a powered hub.

Thanks for the idea. After removing the USB hub the problem is gone. now I only need to figure out why the cgminer suddenly stops mining after a while

Have you seen what error it outputs and/or what state it ends up in?

The problem is that I did not see any output. It looks like a user press the "q" for quitting the cgminer.
After running it a few times, it is running longer. now it already running 3 hours without a break. thanks again for the advices. I was almost in the position to resell the stupid antminer U3

[flyingplows]

where can i buy this antminer u3 cheap, in EU, not get scammed and pay with paypal? i know it won't roi, but just to have fun..

[CCW]

where can i buy this antminer u3 cheap, in EU, not get scammed and pay with paypal? i know it won't roi, but just to have fun..

I got mine recently on eBay. You can get it for around 80 Euro and pay there using paypal

[kcal63]

What would everyone suggest as a good backup power supply to replace the crap one that the Antminer U3 came with? Amazon links if they carry it preferred...

6A one from my rockminer guide.

I really think we are all going to have to switch to ATX computer PSU's with breakout boards for these U3's.
Dogie I bought one of the ones you suggested after my first stock PSU melted. The replacement one you suggested lasted 4 days (at least it didn't melt or catch fire, it just died completely).
I had previously had 3 of those also die while using them for my R-boxes (the 5A version) but I just replaced them as they lasted 2 months before dying on me and I got them cheap ($6 each).

[pak13]

What would everyone suggest as a good backup power supply to replace the crap one that the Antminer U3 came with? Amazon links if they carry it preferred...

6A one from my rockminer guide.

I really think we are all going to have to switch to ATX computer PSU's with breakout boards for these U3's.
Dogie I bought one of the ones you suggested after my first stock PSU melted. The replacement one you suggested lasted 4 days (at least it didn't melt or catch fire, it just died completely).
I had previously had 3 of those also die while using them for my R-boxes (the 5A version) but I just replaced them as they lasted 2 months before dying on me and I got them cheap ($6 each).

You have to remember, most of the time when someone like dogie suggests an item and it contains a hidden link to Amazon or the like, he has an associate tag embedded and receives commission on EVERYTHING in your shopping cart. Not just that one item. So please don't trust those links. Don't click on them. They force your cart to give him commission for the next 24 hours! Trust anyone else who links. Also cross check ratings of those products with other reputable outlets. newegg, overstock etc. Whilst you may not be able to purchase from them, you can at least trust their rating systems over Amazon.