[ANN] FlappyCoin - PoS Released - 6/29 - Need Counterparty Fork - 4btc

[menlatin]

Oh. Well then, there's really not a whole to worry about as long as mining pools are on v4.0, right? So transactions between 4.0 and 3.2 wallets should still work too?

[1714149481]

1714149481

[1714149481]

1714149481

[1714149481]

1714149481

[JudgeDredd]

I am getting an error when opening the wallet, I have the latest version 4.0 POS:
http://puu.sh/irEgC/1b0e23323a.jpg

[Griffith]

id first like to take a minute to LOL. when i get a PM from an account that has newbie status it warns me that the user is probably new and doesnt know anything. i appriciate that bct, nice.

to answer the actual question. im going to tell you to do some trivial stupid things.

if at any point the program works, you do not need to continue following the steps.

1. try running as admin
2 a) reboot then
   b)try normal
   c)try as admin
3) reinstall the c++ distributable (not sure which one it is for this bug)
4) if you are still having problems post again and give the following system specs:
-OS
-amount of RAM on the computer
-32 or 64 bit
-version of last FLAPPY wallet that worked (if any)
- have you ever run a coin wallet before
(if the answer to the previous question was yes)  <-- the questions below is because i am looking at possible problems with Locality of reference(principle of locality). if you dont know what that is, thats fine.
-what coins (name 2 or 3)
-do you run more than one coin at once



ive had this problem once before. a reboot fixed it for me

[JudgeDredd]

I managed to get it working.

Now why is there no "Stake:" under balance like every POS coin wallet ?
Like this:
http://puu.sh/irOmU/fc83f63a8c.png

[Griffith]

I managed to get it working.

Now why is there no "Stake:" under balance like every POS coin wallet ?
Like this:

thats purely a cosmetic thing. staking coins will just show up under unconfirmed for this wallet. i guess i could add the other category if you want. but i dont see why its needed

[CryptoDatabase]

alright. well. you need to rebroadcast your transactions to the network because they were never packed into a block... but this wallet doesnt have an rpc command to do that... so i can code one up today. theres probably also some other small fixes i could make to have the wallet run better. i post something before i go to sleep tonight. i am updating a website right now so it probably wont be until a little later in the day

Any update on this? I tried a transaction to myself and it went through and went to send another sendmany command and it froze the transaction like the others.

No working wallet = people can't get their coins from DK or the faucet and its making me look bad as they aren't getting what I promised them.

[Griffith]

alright. well. you need to rebroadcast your transactions to the network because they were never packed into a block... but this wallet doesnt have an rpc command to do that... so i can code one up today. theres probably also some other small fixes i could make to have the wallet run better. i post something before i go to sleep tonight. i am updating a website right now so it probably wont be until a little later in the day

Any update on this? I tried a transaction to myself and it went through and went to send another sendmany command and it froze the transaction like the others.

No working wallet = people can't get their coins from DK or the faucet and its making me look bad as they aren't getting what I promised them.

i looked at it. and there wasnt anything wrong... im curious. if you do a sendtoaddress instead of a sendmany does it work?

edit: have you restarted your wallet since the tx sends that never went through?

[SISAR]

alright. well. you need to rebroadcast your transactions to the network because they were never packed into a block... but this wallet doesnt have an rpc command to do that... so i can code one up today. theres probably also some other small fixes i could make to have the wallet run better. i post something before i go to sleep tonight. i am updating a website right now so it probably wont be until a little later in the day

Any update on this? I tried a transaction to myself and it went through and went to send another sendmany command and it froze the transaction like the others.

No working wallet = people can't get their coins from DK or the faucet and its making me look bad as they aren't getting what I promised them.

Wallet v4.0 has issue with too low fee when sending coins to 3rd-party (outside of wallet).

https://i.imgur.com/EnQgsgz.png

Both unconfirmed transactions are in mempool and were broadcasted to other nodes but I can't tell if other nodes accepted them or not.

https://i.imgur.com/oRR2R8B.png

Fix please.

[menlatin]

So you're the one dumping on cryptsy and pushing the price down?

[SISAR]

So you're the one dumping on cryptsy and pushing the price down?

Dumped some coins I bought for 1 to 5 Litoshi at Poloniex, why not take big profit? Correction would come sooner or later anyway so why wait and risk to make less money?

[menlatin]

We're not even off the ground yet. The only reason the price is where it is now is because of me buying it up. And it's not in order to dump it, it's to distribute to new users.

[SISAR]

We're not even off the ground yet. The only reason the price is where it is now is because of me buying it up. And it's not in order to dump it, it's to distribute to new users.

I'm aware of all that, keeping my remaining 400 millions FLAP until we reach Moon.  

[CryptoDatabase]

alright. well. you need to rebroadcast your transactions to the network because they were never packed into a block... but this wallet doesnt have an rpc command to do that... so i can code one up today. theres probably also some other small fixes i could make to have the wallet run better. i post something before i go to sleep tonight. i am updating a website right now so it probably wont be until a little later in the day

Any update on this? I tried a transaction to myself and it went through and went to send another sendmany command and it froze the transaction like the others.

No working wallet = people can't get their coins from DK or the faucet and its making me look bad as they aren't getting what I promised them.

i looked at it. and there wasnt anything wrong... im curious. if you do a sendtoaddress instead of a sendmany does it work?

edit: have you restarted your wallet since the tx sends that never went through?

I have restarted it multiple times. Something has to be wrong if the two transactions aren't confirming after 6 days and 2 days.

When I use sendmany to send coins to just 1 address it will go through, if there is more than 1 address it will freeze it and not send it.

Hopefully this error has a solution or I will have to remove FlappyCoin from my websites as I cannot sit here manually inserting 100 payments a day to people.

[Griffith]

alright. well. you need to rebroadcast your transactions to the network because they were never packed into a block... but this wallet doesnt have an rpc command to do that... so i can code one up today. theres probably also some other small fixes i could make to have the wallet run better. i post something before i go to sleep tonight. i am updating a website right now so it probably wont be until a little later in the day

Any update on this? I tried a transaction to myself and it went through and went to send another sendmany command and it froze the transaction like the others.

No working wallet = people can't get their coins from DK or the faucet and its making me look bad as they aren't getting what I promised them.

Wallet v4.0 has issue with too low fee when sending coins to 3rd-party (outside of wallet).

https://i.imgur.com/EnQgsgz.png

Both unconfirmed transactions are in mempool and were broadcasted to other nodes but I can't tell if other nodes accepted them or not.

https://i.imgur.com/oRR2R8B.png

Fix please.

ive never herd of someone complaining about too low of a fee, lol. you can set the fee you pay as an option in the wallet if you want. but the mempool i will take a look at right now (its loading on my other screen)

alright. well. you need to rebroadcast your transactions to the network because they were never packed into a block... but this wallet doesnt have an rpc command to do that... so i can code one up today. theres probably also some other small fixes i could make to have the wallet run better. i post something before i go to sleep tonight. i am updating a website right now so it probably wont be until a little later in the day

Any update on this? I tried a transaction to myself and it went through and went to send another sendmany command and it froze the transaction like the others.

No working wallet = people can't get their coins from DK or the faucet and its making me look bad as they aren't getting what I promised them.

i looked at it. and there wasnt anything wrong... im curious. if you do a sendtoaddress instead of a sendmany does it work?

edit: have you restarted your wallet since the tx sends that never went through?

I have restarted it multiple times. Something has to be wrong if the two transactions aren't confirming after 6 days and 2 days.

When I use sendmany to send coins to just 1 address it will go through, if there is more than 1 address it will freeze it and not send it.

Hopefully this error has a solution or I will have to remove FlappyCoin from my websites as I cannot sit here manually inserting 100 payments a day to people.

oh ok. so at least we have isolated the problem that it is with the sendmany command.  i will take a look at that one right now. again i ask that you try to send with the sendtoaddress and tell me what happens when you do that,

and if you could post some TX ID of the stuck transactions that would help me out a ton too

edit: i believe the problem is with the miner itself. im going to rewrite a large portion of it. (i dont think it is packing transactions correctly)

[SISAR]

alright. well. you need to rebroadcast your transactions to the network because they were never packed into a block... but this wallet doesnt have an rpc command to do that... so i can code one up today. theres probably also some other small fixes i could make to have the wallet run better. i post something before i go to sleep tonight. i am updating a website right now so it probably wont be until a little later in the day

Any update on this? I tried a transaction to myself and it went through and went to send another sendmany command and it froze the transaction like the others.

No working wallet = people can't get their coins from DK or the faucet and its making me look bad as they aren't getting what I promised them.

Wallet v4.0 has issue with too low fee when sending coins to 3rd-party (outside of wallet).

https://i.imgur.com/EnQgsgz.png

Both unconfirmed transactions are in mempool and were broadcasted to other nodes but I can't tell if other nodes accepted them or not.

https://i.imgur.com/oRR2R8B.png

Fix please.

ive never herd of someone complaining about too low of a fee, lol. you can set the fee you pay as an option in the wallet if you want. but the mempool i will take a look at right now (its loading on my other screen)

I'm not complaining, I'm just stating the fact wallet v4.0 does not calculate fee properly when coins are sent outside of wallet which is what makes pools and solo miners ignore such transactions.

[Griffith]

alright. well. you need to rebroadcast your transactions to the network because they were never packed into a block... but this wallet doesnt have an rpc command to do that... so i can code one up today. theres probably also some other small fixes i could make to have the wallet run better. i post something before i go to sleep tonight. i am updating a website right now so it probably wont be until a little later in the day

Any update on this? I tried a transaction to myself and it went through and went to send another sendmany command and it froze the transaction like the others.

No working wallet = people can't get their coins from DK or the faucet and its making me look bad as they aren't getting what I promised them.

Wallet v4.0 has issue with too low fee when sending coins to 3rd-party (outside of wallet).

https://i.imgur.com/EnQgsgz.png

Both unconfirmed transactions are in mempool and were broadcasted to other nodes but I can't tell if other nodes accepted them or not.

https://i.imgur.com/oRR2R8B.png

Fix please.

ive never herd of someone complaining about too low of a fee, lol. you can set the fee you pay as an option in the wallet if you want. but the mempool i will take a look at right now (its loading on my other screen)

I'm not complaining, I'm just stating the fact wallet v4.0 does not calculate fee properly when coins are sent outside of wallet which is what makes pools and miners ignore such transactions.

that is both true and false. true because yes, they will ignore them if others have a higher fee, but false in this case because a lot of the blocks only have the 1 mining transaction and if there is no other transactions to compete against low fee ones will be packed into a block (or should be)

edit: the tx id you posted in the picture, can you past them as text here so i can copy paste for search testing?

[CryptoDatabase]

oh ok. so at least we have isolated the problem that it is with the sendmany command.  i will take a look at that one right now. again i ask that you try to send with the sendtoaddress and tell me what happens when you do that,

and if you could post some TX ID of the stuck transactions that would help me out a ton too

Here is the sendtoaddress,

Status: 0/unconfirmed, broadcast through 3 nodes
Date: 6/17/2015 12:07
To: FCF63WTpyHFjMihoKU23zvzZJM6bd7M7ud
Debit: -3049.00 FLAP
Transaction fee: -3.406 FLAP
Net amount: -3052.406 FLAP

Comment:
test
Transaction ID: 0a04c81ff6076a308745b45439b2bdb12777bb6a4f876e8ce5575afcf1358747

Here is the transaction details for each of the 3 transactions sent since the 11th.

Status: 0/unconfirmed
Date: 6/15/2015 17:12
To: FCF63WTpyHFjMihoKU23zvzZJM6bd7M7ud
Debit: -6963.00 FLAP
To: FFJ1N8QHs81csudr6syhVv19vfZ5S1HbrD
Debit: -8766.00 FLAP
To: FQ6WiPRjHupHRzLA1Q1cLwu9DQ5Swy7GGn
Debit: -4890.00 FLAP
To: FRNx4d7zWF5kDHx5iSdEDGCW7BPHcBBmGJ
Debit: -5770.00 FLAP
To: FUWdseqevVZDQm3StMatdk69okdUVqFyfB
Debit: -5979.00 FLAP
To: FEHshdV6Qs4VqZZQhg95uwTXMJL1QKLJga
Debit: -4410.00 FLAP
To: FEJFzFWiPVWcsWqgTcUciQkWayMKmXpoCx
Debit: -5777.00 FLAP
To: FGthxm8u9RTcaWmtPJXXdC7A6fxX5QEfpy
Debit: -1396.00 FLAP
To: FMxbo8fM2HCJwNXaCUthFizP5A377U8Avv
Debit: -6927.00 FLAP
To: FCrWhaHiddAzv6gMXGVEnY77JPQn6GePWH
Debit: -4637.00 FLAP
To: F7hjUjUcq4TiLMknQ5MWVjG8m4Q7opiGxa
Debit: -5788.00 FLAP
To: F7gvZD8ak95TYWoEaBEfP69gsoJ6Bohsm6
Debit: -13024.00 FLAP
To: FCauuR5m8x4NKbp5haA5mD3V8c5crn1gmu
Debit: -4844.00 FLAP
To: FNsabcMU5vrXo6McWbFTjpmZ9Wu8GgS9DW
Debit: -8209.00 FLAP
To: FPh4o4edx7EudPWZJen5PxeKVEuk8Pxvcn
Debit: -2697.00 FLAP
To: FPLi2W4o7WRKNzUggQiQtVrXVQ8kqrNu3v
Debit: -5651.00 FLAP
To: FGVWfAtKV8hf2TPqcecERNXrVV4Uh1kgN3
Debit: -18189.00 FLAP
To: FMYZeaU4sBR55x6KPpHVCgSuxJub7oPHao
Debit: -19860.00 FLAP
To: FJDrgs92C8GTwQhFJjsmVPNXA8yM1bWJD6
Debit: -4723.00 FLAP
To: F9b6cj5VcpviuLhhe7yG5LZyUTYqR36qeG
Debit: -4554.00 FLAP
To: FKMwP4AMTLaYP38PA29apBEPnBPTNBTBRh
Debit: -11770.00 FLAP
To: FKbcmrWUaPdYTgx3HCHzFWE5sMVCSLchvn
Debit: -13511.00 FLAP
To: FHLPPU99VUAQTv3t9EZtJUAwS6ZMF9uFf5
Debit: -1157.00 FLAP
To: FSeKsyk9ytGVCPUGZwK1KrjfydrA4FXcaN
Debit: -4025.00 FLAP
To: FLheZF6NZbG5pJ9TJTuQ5pUT8F1zGw9Zq5
Debit: -9763.00 FLAP
To: FBYL3QKcXAbuWE8PXqRvSvrHbE4Nwdvknw
Debit: -14649.00 FLAP
To: FAzfJra8qCksTguoGdnNjgGBRSXpVJ83fN
Debit: -21519.00 FLAP
To: FEreev3DqrXYerV67qBkdRj8Dbj3F4Ay6J
Debit: -5006.00 FLAP
To: FEcFiP4NbxvrfzF75nx6cWnDVcKNxFkpN3
Debit: -4166.00 FLAP
To: FH53v4DQ4oMuQnNqTvgC2YqDWfR8gwQYar
Debit: -5314.00 FLAP
Transaction fee: -0.002 FLAP
Net amount: -233934.002 FLAP

Comment:
flappycoin
Transaction ID: 948b03bfcb63a9584227968db7582b1b4430913bb8a53aaba0a9fa66e84d09ba

Status: 0/unconfirmed
Date: 6/11/2015 16:00
To: FCF63WTpyHFjMihoKU23zvzZJM6bd7M7ud
Debit: -936.00 FLAP
To: FUWdseqevVZDQm3StMatdk69okdUVqFyfB
Debit: -2454.00 FLAP
To: FEJFzFWiPVWcsWqgTcUciQkWayMKmXpoCx
Debit: -1693.00 FLAP
To: FGthxm8u9RTcaWmtPJXXdC7A6fxX5QEfpy
Debit: -1098.00 FLAP
To: FMxbo8fM2HCJwNXaCUthFizP5A377U8Avv
Debit: -1746.00 FLAP
To: F7hjUjUcq4TiLMknQ5MWVjG8m4Q7opiGxa
Debit: -1583.00 FLAP
To: F7gvZD8ak95TYWoEaBEfP69gsoJ6Bohsm6
Debit: -9847.00 FLAP
To: FDEA1VTM2h3wrCBURzTvaMsLNjFtByS2bg
Debit: -1806.00 FLAP
To: FCauuR5m8x4NKbp5haA5mD3V8c5crn1gmu
Debit: -3427.00 FLAP
To: FPh4o4edx7EudPWZJen5PxeKVEuk8Pxvcn
Debit: -6860.00 FLAP
To: FPLi2W4o7WRKNzUggQiQtVrXVQ8kqrNu3v
Debit: -1011.00 FLAP
To: FGVWfAtKV8hf2TPqcecERNXrVV4Uh1kgN3
Debit: -5227.00 FLAP
To: FMYZeaU4sBR55x6KPpHVCgSuxJub7oPHao
Debit: -6191.00 FLAP
To: FJDrgs92C8GTwQhFJjsmVPNXA8yM1bWJD6
Debit: -1255.00 FLAP
To: F9b6cj5VcpviuLhhe7yG5LZyUTYqR36qeG
Debit: -1766.00 FLAP
To: FKMwP4AMTLaYP38PA29apBEPnBPTNBTBRh
Debit: -5848.00 FLAP
To: FKbcmrWUaPdYTgx3HCHzFWE5sMVCSLchvn
Debit: -3226.00 FLAP
To: FSeKsyk9ytGVCPUGZwK1KrjfydrA4FXcaN
Debit: -1205.00 FLAP
To: FPBXnZ7AQc4ZPyBXYySVfhecZF2XcmtFiX
Debit: -808.00 FLAP
To: FLheZF6NZbG5pJ9TJTuQ5pUT8F1zGw9Zq5
Debit: -2244.00 FLAP
To: FBYL3QKcXAbuWE8PXqRvSvrHbE4Nwdvknw
Debit: -8465.00 FLAP
To: FAzfJra8qCksTguoGdnNjgGBRSXpVJ83fN
Debit: -4339.00 FLAP
To: FEreev3DqrXYerV67qBkdRj8Dbj3F4Ay6J
Debit: -1118.00 FLAP
To: FL7oYzQfQeaKmNXAQcPmNZVse5knGzKHUw
Debit: -1097.00 FLAP
Transaction fee: -0.002 FLAP
Net amount: -75250.002 FLAP

Comment:
flappycoin
Transaction ID: f91ffb5e4801824afece40efba543d627e05db39eeb0ae8e4e47564e0803b939

Successful payment,

Status: 2555 confirmations
Date: 6/15/2015 17:13
To: FBYL3QKcXAbuWE8PXqRvSvrHbE4Nwdvknw
Debit: -132618.00 FLAP
Transaction fee: -3.391 FLAP
Net amount: -132621.391 FLAP

Comment:
dkflap
Transaction ID: 238143cc1ed4d118997cc004c6d1bef2a3fbbddef98f8693c881b7797503ddc2

[SISAR]

alright. well. you need to rebroadcast your transactions to the network because they were never packed into a block... but this wallet doesnt have an rpc command to do that... so i can code one up today. theres probably also some other small fixes i could make to have the wallet run better. i post something before i go to sleep tonight. i am updating a website right now so it probably wont be until a little later in the day

Any update on this? I tried a transaction to myself and it went through and went to send another sendmany command and it froze the transaction like the others.

No working wallet = people can't get their coins from DK or the faucet and its making me look bad as they aren't getting what I promised them.

Wallet v4.0 has issue with too low fee when sending coins to 3rd-party (outside of wallet).

https://i.imgur.com/EnQgsgz.png

Both unconfirmed transactions are in mempool and were broadcasted to other nodes but I can't tell if other nodes accepted them or not.

https://i.imgur.com/oRR2R8B.png

Fix please.

ive never herd of someone complaining about too low of a fee, lol. you can set the fee you pay as an option in the wallet if you want. but the mempool i will take a look at right now (its loading on my other screen)

I'm not complaining, I'm just stating the fact wallet v4.0 does not calculate fee properly when coins are sent outside of wallet which is what makes pools and miners ignore such transactions.

that is both true and false. true because yes, they will ignore them if others have a higher fee, but false in this case because a lot of the blocks only have the 1 mining transaction and if there is no other transactions to compete against low fee ones will be packed into a block (or should be)

edit: the tx id you posted in the picture, can you past them as text here so i can copy paste for search testing?

Don't have those transactions anymore.  Luckily I had backup of wallet v3.1 and after a few hours long reindex (there is some incompatibility when it comes to database with v3 and v4) and rescan I've successfuly sent all coins to Cryptsy, transaction fees were as expected (much more than 0.001 FLAP). Coins will stay there until I'm convinced PoS upgrade works as expected but for now I'm expecting a major shitstorm coming at hard-fork block.

Transactions might still be at mempool, use getrawmempool at Console to check.

[Griffith]

see now im confused. because i just did a few sendmany commands

https://chainz.cryptoid.info/flap/block.dws?683132.htm (computer 1)

and

https://chainz.cryptoid.info/flap/block.dws?683140.htm (computer 2)

and it was confirmed by chasingcoin within a block and i havent commited my changes to the miner yet.

cryptodatabase, are the transactions still in your mempool? (getrawmempool) (im trusting you formatted the sendmany command properly)


edit: SISAR i edited the way the block finds the TX fee for the transactions (should be a little higher of a base now) and removed the free transaction ability which was lowering fees even more, and that incompatibility you pointed out would be the PoS system


so right now my conclusion is at sendmany commands are being relayed properly in the system

[CryptoDatabase]

see now im confused. because i just did a few sendmany commands

https://chainz.cryptoid.info/flap/block.dws?683132.htm (computer 1)

and

https://chainz.cryptoid.info/flap/block.dws?683140.htm (computer 2)

and it was confirmed by chasingcoin within a block and i havent commited my changes to the miner yet.

cryptodatabase, are the transactions still in your mempool? (getrawmempool)


edit: SISAR i edited the way the block finds the TX fee for the transactions (should be a little higher of a base now), and that incompatibility you pointed out would be the PoS system


so right now my conclusion is at sendmany commands are being relayed properly in the system

It has never done this before until I upgraded to this version of the wallet and trust me, I've sent out thousands and thousands of payments in the past.

Here is my rawmempool,

getrawmempool
[
"3a2c5a58f14f98f7e3d18b64dcdef62d55ffe32461214734f2453da03c1eac5c",
"70e9908669332277b8d6e3f29e89c239ac875368954c6b862f51b2ea3aae0b76",
"948b03bfcb63a9584227968db7582b1b4430913bb8a53aaba0a9fa66e84d09ba",
"f91ffb5e4801824afece40efba543d627e05db39eeb0ae8e4e47564e0803b939"
]

It is removing my coins successfully though, somewhere around 300k FLAP is gone right now.

As a tip, a transaction won't be attempted if the rpc command is incorrect, just a FYI for the future.

This is the command I use for 9 wallets, never have a problem until now with this new wallet.

sendmany "" '{"FCF63WTpyHFjMihoKU23zvzZJM6bd7M7ud":3119,"FFJ1N8QHs81csudr6syhVv19vfZ5S1HbrD":3032,"FUWdseqevVZDQm3StMatdk69okdUVqFyfB":2975,"FEHshdV6Qs4VqZZQhg95uwTXMJL1QKLJga":3846,"FEJFzFWiPVWcsWqgTcUciQkWayMKmXpoCx":3081,"FMxbo8fM2HCJwNXaCUthFizP5A377U8Avv":3122,"F7hjUjUcq4TiLMknQ5MWVjG8m4Q7opiGxa":3095,"F7gvZD8ak95TYWoEaBEfP69gsoJ6Bohsm6":8410,"FPh4o4edx7EudPWZJen5PxeKVEuk8Pxvcn":4910,"FPLi2W4o7WRKNzUggQiQtVrXVQ8kqrNu3v":1545,"FTgL1aCskR2jAck8FsjF723KVr9p4GdzTj":7236,"FMYZeaU4sBR55x6KPpHVCgSuxJub7oPHao":7101,"FJDrgs92C8GTwQhFJjsmVPNXA8yM1bWJD6":2377,"FKMwP4AMTLaYP38PA29apBEPnBPTNBTBRh":4883,"FKbcmrWUaPdYTgx3HCHzFWE5sMVCSLchvn":9467,"FSeKsyk9ytGVCPUGZwK1KrjfydrA4FXcaN":3679,"FMnpy1JSXRjRHGwF6tKVMtXrrzrGyppK3z":2656,"FLheZF6NZbG5pJ9TJTuQ5pUT8F1zGw9Zq5":3796,"FBYL3QKcXAbuWE8PXqRvSvrHbE4Nwdvknw":4539,"FAzfJra8qCksTguoGdnNjgGBRSXpVJ83fN":4564,"FH53v4DQ4oMuQnNqTvgC2YqDWfR8gwQYar":18610}' 1 flappycoin

It is auto generated by my website, there is absolutely no possible way human error can be involved on my end, it is the wallet.