EUROPECOIN [ERC] 🌟 FINANCECLOUD 🌟 CRYPTOCURRENY & FINANCE API + SMARTHUB 🌟

[cryptonit]

Aynyone remember the command to return staking coins to wallet?

successful staked coins u need to wait until they mature
unsuccessful stuck in POS coins u can get back with console command
repairwallet

and avoid to try POS u can with the startup parameter vegas wrote
or even as conf file option
reservebalance=9999999

[1714952513]

1714952513

[1714952513]

1714952513

[cryptonit]

chain moving slower than expected?



{
"errors" : "Warnung: �\u009Cberprüpfen Sie ihre Netzwerkverbindung, 20 Blöcke wurden in den letzten 4 Stunden empfangen (48 wurden erwartet)."
}


without high hashrate and no hybrid POW/POS solution what protect network against someone with high CPU power (botnet...) jump in and make a 51% attack and doublespend?

[Limx Dev]

chain moving slower than expected?



{
"errors" : "Warnung: �\u009Cberprüpfen Sie ihre Netzwerkverbindung, 20 Blöcke wurden in den letzten 4 Stunden empfangen (48 wurden erwartet)."
}


without high hashrate and no hybrid POW/POS solution what protect network against someone with high CPU power (botnet...) jump in and make a 51% attack and doublespend?

Hello, the Dual KGW3 see a timespann from 24h... the warning caculate with 4 hours.

We have unknow cpu algo and high coinbase maturity from 288 blocks and the core 11.3 is greatly improved. 100 % sure is nothing ^^

Edit:
We have ~5 Days ...with calculate 1440 Blocks and currently have we 1416. If the explorer online is see we that better.

[Limx Dev]

14.07.2016

Overview
https://dl.dropboxusercontent.com/u/21000833/ERC/Swap/Swap%20Public.txt

[metamorphin]

I bring back our SWAP-RULES!

SWAP - How to do!

1a. Backup wallet.dat from old unswapped europecoin
1b. Download new wallet: https://github.com/LIMXTEC/Europecoin-V3/releases
1c. Install it. You can run the old wallet and the new wallet together by creating a shortcut of the new
    europecoin-qt.exe and run with following addition -choosedatadir ---> it will start and ask you for the
    name of the new folder; it should be different than the old ERCV2-folder
    http://imgur.com/a/okgHV


1d. IMPORTANT!!
    Be sure, that you really have the old wallet with version 2.0.3.0!!! Only these version can transfer
    the old coins to swapserver. If you havee  Version 2.0.25.0 or even older, so make sure, to go to ERC V2.0.3.0.
    Link is here:
    http://www.europecoin.eu.org/europecoin-wallet-download/category/1-europecoin-wallet?download=30:v2-0-windows-noinstall-28-01-2016
    

2. Go to following link: http://www.europecoin.eu.org/swap-tool-erc

3. Press the 'Continue' button

4. Go to 'Account'  http://imgur.com/a/RrZnv

5. Click on 'Change' to fill in your new ERCwalletaddress from ERC V3.

6. For more security set a password.

7. Save your unique URL somewhere. Its also important for some delays or whatever could happen.
   Tell your Service Token only "szenekonzept", "Limx Dev" or "metamorpin" from Bitcointalk.

8. Click deposit. You reach the new swap-deposit-address, where you can send now your old coins.

9. By clicking reload symbol near of Balance, you should see after a while your incoming old coins on the
   swapserver. Or you click on pending deposit under 'Deposit' http://imgur.com/a/MXJQr

10. Wait now till monday. We are transfering the new coins always on monday.

11. last hint of chris:

  Please Note:

  - Please create for every transaction a new withdraw address.
  - Your received for 10 ERC one new ERC (10:1).
  - The payout day for new ERCs is always Monday.
  - Please use your account only for one transaction! ( Remove your cookis for a new account)
  - The minimum amount is 250 old erc.
  - We pay only full new ERC ( 250.007 old ERC = 25 new ERC).

12. Our first timeperiod should be around 6 months. We will announce still the exact date after the first smooth
    swapped coins.

Enjoy now the new ride of ERC V3.

Before I close my briefing for you -

PRAISE our awesome developer team. We wouldnt be here, if Chris wouldnt go line for line through the unique
code of ERC. We wouldnt be known, if Matthias wouldnt manage the marketing and lead the coin. And we couldnt complete
the 3 Musketeer team without me.


If you wanna show your love for their work, so here is their ERCV3 wallet: EZd4RKp6N91q6EHtm3e9aoCqa5Pb66qFSj

EDIT: Bittrex or any exchange isnt involved in this swap. You have to transfer the coins to swapserver and call us a new address there..



Greetz
Steve

[backbonejb]

Hi All,

The swaptool / conversion is working great!

Conversion is working very smooth...and quicker than promised in the notes by Steve.

A very, very nice job done by the devteam.

Thanks for putting al your effort in making this possible.

I believe ERC is gonna have a very bright future!

[Kazadar]

I just ran into a problem using the swap tool.
I transfered some ERC to swap but the tool keeps saying ERC balance 0.00.
The transaction have gone through and the ERC deposited but the balance in the swap tool still says 0.


Txid: 5f87992d263a88aeead2dbfc74319aa8d80bb33bdb6fe54fc14c63bd838b8efe

[cryptonit]

im out of ERC own zero 


but i own a nice bunch of ERC v3 now 

thx for flawless swap experience!

[BanzaiBTC]

Almost done with ERC v3 block explorer.. I basicly had to re-write 1/4th of my code to be able to keep up with this A+ sourcecode

My compliments to the developer.. similair to latest bitcoin core

[mladen00]

hi,

yesterday i withdraw 20000 erc from bittrex, but my wallet is empty
tx:
Address: EP6Fs2NfE57o1PCDs9LiV5hyqEHTEpy1xo
TxId: a45e96705abd2e0396f179000edaf344596160649cd133c62e3bd65496e3b3d8

how long i must wait or do i need to do something

my wallet version is v3.0

[Limx Dev]

I just ran into a problem using the swap tool.
I transfered some ERC to swap but the tool keeps saying ERC balance 0.00.
The transaction have gone through and the ERC deposited but the balance in the swap tool still says 0.


Txid: 5f87992d263a88aeead2dbfc74319aa8d80bb33bdb6fe54fc14c63bd838b8efe

I look tomorrow ^^

Almost done with ERC v3 block explorer.. I basicly had to re-write 1/4th of my code to be able to keep up with this A+ sourcecode

My compliments to the developer.. similair to latest bitcoin core

Thank your...it is a big step for ERC.  

hi,

yesterday i withdraw 20000 erc from bittrex, but my wallet is empty
tx:
Address: EP6Fs2NfE57o1PCDs9LiV5hyqEHTEpy1xo
TxId: a45e96705abd2e0396f179000edaf344596160649cd133c62e3bd65496e3b3d8

how long i must wait or do i need to do something

my wallet version is v3.0

Do you have use a new ERCV3 addresse for the withdraw? It is a base 52 address.

[pallas]

Is the HODL mining compatible with HODLcoin, i.e. same miners working in solo and stratum in the future? Same block header?
Did you take the same code? I used to improve it some months ago when it was first out. There is a 10-20% hashrate to reclaim.

On a side note, if the code is the same, do not use more than 1 Gb per core as you will increase the hashrate very little and get a lot of orphans (the mining threads do not stop when a new block is received and continue mining on the old block; I fixed that too).

[mladen00]

I just ran into a problem using the swap tool.
I transfered some ERC to swap but the tool keeps saying ERC balance 0.00.
The transaction have gone through and the ERC deposited but the balance in the swap tool still says 0.


Txid: 5f87992d263a88aeead2dbfc74319aa8d80bb33bdb6fe54fc14c63bd838b8efe

I look tomorrow ^^

Almost done with ERC v3 block explorer.. I basicly had to re-write 1/4th of my code to be able to keep up with this A+ sourcecode

My compliments to the developer.. similair to latest bitcoin core

Thank your...it is a big step for ERC.  

hi,

yesterday i withdraw 20000 erc from bittrex, but my wallet is empty
tx:
Address: EP6Fs2NfE57o1PCDs9LiV5hyqEHTEpy1xo
TxId: a45e96705abd2e0396f179000edaf344596160649cd133c62e3bd65496e3b3d8

how long i must wait or do i need to do something

my wallet version is v3.0

Do you have use a new ERCV3 addresse for the withdraw? It is a base 52 address.

yes, i dowloaded yesterday first wallet v3.0, and address is from that wallet

[Limx Dev]

I just ran into a problem using the swap tool.
I transfered some ERC to swap but the tool keeps saying ERC balance 0.00.
The transaction have gone through and the ERC deposited but the balance in the swap tool still says 0.


Txid: 5f87992d263a88aeead2dbfc74319aa8d80bb33bdb6fe54fc14c63bd838b8efe

I look tomorrow ^^

Almost done with ERC v3 block explorer.. I basicly had to re-write 1/4th of my code to be able to keep up with this A+ sourcecode

My compliments to the developer.. similair to latest bitcoin core

Thank your...it is a big step for ERC.  

hi,

yesterday i withdraw 20000 erc from bittrex, but my wallet is empty
tx:
Address: EP6Fs2NfE57o1PCDs9LiV5hyqEHTEpy1xo
TxId: a45e96705abd2e0396f179000edaf344596160649cd133c62e3bd65496e3b3d8

how long i must wait or do i need to do something

my wallet version is v3.0

Do you have use a new ERCV3 addresse for the withdraw? It is a base 52 address.

yes, i dowloaded yesterday first wallet v3.0, and address is from that wallet

Okay you have your coins burned. (ERC and ERCV3 have differnt chains)
Please note your complete TXs and send it per PM to me and give me your wallet.dat from ERCV with password. Please create then a new ercv3 wallet and give me a new ERCv3 address. I speak with Matt and Steve about that. I think we find a solution.

Is the HODL mining compatible with HODLcoin, i.e. same miners working in solo and stratum in the future? Same block header?
Did you take the same code? I used to improve it some months ago when it was first out. There is a 10-20% hashrate to reclaim.

Yes is it compatible with a another port and we use my new Dual KGW3. The blocktime is 5 min.

On a side note, if the code is the same, do not use more than 1 Gb per core as you will increase the hashrate very little and get a lot of orphans (the mining threads do not stop when a new block is received and continue mining on the old block; I fixed that too).

I have seen no problems until 2GB.

[pallas]

On a side note, if the code is the same, do not use more than 1 Gb per core as you will increase the hashrate very little and get a lot of orphans (the mining threads do not stop when a new block is received and continue mining on the old block; I fixed that too).

I have seen no problems until 2GB.

The number of threads is genproclimit * minermemory, so if you use 2GB and 4 threads you actually have 8 threads, not sure everybody has that clear.
Using 2GB instead of 1GB wil make the mining threads slight faster than half, and since it takes many seconds to do a full AES search, the chance of orphans gets higher in a sensible way (almost doubles).
That wouldn't be a problem if the threads stopped when a new block is received or mined.

[BluRPie]

I would like to know who is responsable for the swap tool. I would like to receive a PM from him. I have a question about it

[metamorphin]

I would like to know who is responsable for the swap tool. I would like to receive a PM from him. I have a question about it

Hey BluRPie,

shoot us a pm. You can always ask us, what you wanna know.

Greetz
Steve

[szenekonzept]

I just ran into a problem using the swap tool.
I transfered some ERC to swap but the tool keeps saying ERC balance 0.00.
The transaction have gone through and the ERC deposited but the balance in the swap tool still says 0.


Txid: 5f87992d263a88aeead2dbfc74319aa8d80bb33bdb6fe54fc14c63bd838b8efe

I look tomorrow ^^

Almost done with ERC v3 block explorer.. I basicly had to re-write 1/4th of my code to be able to keep up with this A+ sourcecode

My compliments to the developer.. similair to latest bitcoin core

Thank your...it is a big step for ERC. 

hi,

yesterday i withdraw 20000 erc from bittrex, but my wallet is empty
tx:
Address: EP6Fs2NfE57o1PCDs9LiV5hyqEHTEpy1xo
TxId: a45e96705abd2e0396f179000edaf344596160649cd133c62e3bd65496e3b3d8

how long i must wait or do i need to do something

my wallet version is v3.0

Do you have use a new ERCV3 addresse for the withdraw? It is a base 52 address.

yes, i dowloaded yesterday first wallet v3.0, and address is from that wallet

Okay you have your coins burned. (ERC and ERCV3 have differnt chains)
Please note your complete TXs and send it per PM to me and give me your wallet.dat from ERCV with password. Please create then a new ercv3 wallet and give me a new ERCv3 address. I speak with Matt and Steve about that. I think we find a solution.

yes of course i think, if you can verify the coins, to have been burned,
he can get the swaped ones. BURNING them, would have been the thing,
that would have been happening with them anyway.

take care,
eyes open when proceeding your coins
always think twice

have fun
Matthias


.

[Limx Dev]

http://chain.blockpioneers.info/erc3/index.php

 

[kz3d8fc7]

http://chain.blockpioneers.info/erc3/index.php

 

Great job!

You can be in the top100 with a single ERCV3!