Limx Dev
Copper Member
Legendary
Offline
Activity: 2324
Merit: 1348
|
|
December 20, 2016, 09:36:30 PM |
|
Hello, First, let's make sure we all are speaking about the same things. Please quote here the exact text of the error you encountered. I'm sure we can make it work. I will show the steps that I followed and I think they are not very clear I followed them to the letter1) # get the source user@machine:~$ git clone https://github.com/LIMXTEC/Europecoin-V3 Europecoin-V3src/ # actually go there user@machine:~$ cd Europecoin-V3src/ *In the first step is very clear, and I have done it without problems
Here it is not clear to me that it is done from step 1 to 2? Because in step 1 it says that I should use user @ machine: ~ $ cd Europecoin-V3src / But in step 2 when you must give the permission and the rest you are here: User @ machine: ~ $ and not here: user @ machine: ~ / Europecoin-V3src $ / In which folder should it be located to give those permissions and update what was described in the step?2) # I needed to explicitly grant "execute" permission to all shell scripts in the source tree. # I know, I'm lazy... # YMMV. user@machine:~$ chmod -Rc +x ./*.sh user@machine:~$ chmod -Rc +x ./*/*.sh user@machine:~$ chmod -Rc +x ./*/*/*.sh user@machine:~$ chmod -Rc +x ./*/*/build_detect_platform user@machine:~$ ./autogen.sh user@machine:~$ ./configure user@machine:~$ make *In number 3 is also unclear on which folder should I place to do this So it tells me that the files do not exist. If I do it here: "User @ machine: ~ $" and not in: "user@machine:~/Europecoin-V3src:~/scr$"
3. user@machine:~$ strip europecoind user@machine:~$ strip europecoin-cli user@machine:~$ strip europecoin-tx user@machine:~$ strip qt/europecoin-qt # just making sure it will run user@machine:~$ chmod +x qt/europecoin-qt * What would be the command to execute the demon
I've tried this: Cd Europecoin-V3src / src ./europecoind
When I do, I say this:
/home/pool/.europecoin/europecoin.conf It is recommended you use the following random password: rpcuser=bitcoinrpc rpcpassword=DPmgz5R8jwZzpEAaoGQNMFQhjS9aTnoCEkhNpeJdCeg7 (you do not need to remember this password) The username and password MUST NOT be the same. If the file does not exist, create it with owner-readable-only file permissions. It is also recommended to set alertnotify so you are notified of problems; for example: alertnotify=echo %s | mail -s "EuropeCoin Alert" admin@foo.com
Looking at the path that tells me I see that the folder "europecoin" has a dot in front of the name: ".europecoin" which makes this hidden and inaccessible, how can I do from console that this folder has the name without the point? Because I do not know how to remove that point I resort to this: I create the file with this command: Sudo nano /home/pool/.europecoin/europecoin.CONF I save it and run it again Cd Europecoin-V3src / src ./europecoind And give me the same message that I create the file europecoin.conf4) # if you want the binaries copied to /usr/local/bin user@machine:~$ make install *This is also not clear to me, I am new to linux, I appreciate the help
I pay 200 ERC for a good explain.
|
Bitcore BTX - a UTXO fork of Bitcoin - since 2017
|
|
|
teosanru
|
|
December 20, 2016, 09:39:45 PM |
|
Hello, First, let's make sure we all are speaking about the same things. Please quote here the exact text of the error you encountered. I'm sure we can make it work. I will show the steps that I followed and I think they are not very clear I followed them to the letter1) # get the source user@machine:~$ git clone https://github.com/LIMXTEC/Europecoin-V3 Europecoin-V3src/ # actually go there user@machine:~$ cd Europecoin-V3src/ *In the first step is very clear, and I have done it without problems
Here it is not clear to me that it is done from step 1 to 2? Because in step 1 it says that I should use user @ machine: ~ $ cd Europecoin-V3src / But in step 2 when you must give the permission and the rest you are here: User @ machine: ~ $ and not here: user @ machine: ~ / Europecoin-V3src $ / In which folder should it be located to give those permissions and update what was described in the step?2) # I needed to explicitly grant "execute" permission to all shell scripts in the source tree. # I know, I'm lazy... # YMMV. user@machine:~$ chmod -Rc +x ./*.sh user@machine:~$ chmod -Rc +x ./*/*.sh user@machine:~$ chmod -Rc +x ./*/*/*.sh user@machine:~$ chmod -Rc +x ./*/*/build_detect_platform user@machine:~$ ./autogen.sh user@machine:~$ ./configure user@machine:~$ make *In number 3 is also unclear on which folder should I place to do this So it tells me that the files do not exist. If I do it here: "User @ machine: ~ $" and not in: "user@machine:~/Europecoin-V3src:~/scr$"
3. user@machine:~$ strip europecoind user@machine:~$ strip europecoin-cli user@machine:~$ strip europecoin-tx user@machine:~$ strip qt/europecoin-qt # just making sure it will run user@machine:~$ chmod +x qt/europecoin-qt * What would be the command to execute the demon
I've tried this: Cd Europecoin-V3src / src ./europecoind
When I do, I say this:
/home/pool/.europecoin/europecoin.conf It is recommended you use the following random password: rpcuser=bitcoinrpc rpcpassword=DPmgz5R8jwZzpEAaoGQNMFQhjS9aTnoCEkhNpeJdCeg7 (you do not need to remember this password) The username and password MUST NOT be the same. If the file does not exist, create it with owner-readable-only file permissions. It is also recommended to set alertnotify so you are notified of problems; for example: alertnotify=echo %s | mail -s "EuropeCoin Alert" admin@foo.com
Looking at the path that tells me I see that the folder "europecoin" has a dot in front of the name: ".europecoin" which makes this hidden and inaccessible, how can I do from console that this folder has the name without the point? Because I do not know how to remove that point I resort to this: I create the file with this command: Sudo nano /home/pool/.europecoin/europecoin.CONF I save it and run it again Cd Europecoin-V3src / src ./europecoind And give me the same message that I create the file europecoin.conf4) # if you want the binaries copied to /usr/local/bin user@machine:~$ make install *This is also not clear to me, I am new to linux, I appreciate the help
I informed that I could do the installation of the wallet europecoin v3 on my dedicated server, but I have another question: Someone could confirm: what is the algorithm that uses europecoin? Thanks for your answers and attention
|
|
|
|
AltPacino
Member
Offline
Activity: 67
Merit: 10
|
|
December 20, 2016, 09:40:11 PM |
|
excuse me but what this topic is about ?
|
█ Districts █ 3D Blockchain Platform █ ICO █ Bounty
|
|
|
szenekonzept (OP)
Legendary
Offline
Activity: 2100
Merit: 1012
Europecoin Financecloud API
|
|
December 20, 2016, 09:59:40 PM |
|
excuse me but what this topic is about ?
About Europecoin and about the activities around it press here to learn more: have fun Matthias .
|
|
|
|
metamorphin
Legendary
Offline
Activity: 1106
Merit: 1004
No risk, no fun!
|
|
December 20, 2016, 10:20:36 PM |
|
I informed that I could do the installation of the wallet europecoin v3 on my dedicated server, but I have another question:
Someone could confirm: what is the algorithm that uses europecoin?
Thanks for your answers and attention
Please have a look at the blockexplorer: https://chainz.cryptoid.info/erc/#!crypto1GB AES Pattern Search (PoW) + Proof of Stake Greetz Steve
|
|
|
|
szenekonzept (OP)
Legendary
Offline
Activity: 2100
Merit: 1012
Europecoin Financecloud API
|
|
December 20, 2016, 10:47:02 PM |
|
I informed that I could do the installation of the wallet europecoin v3 on my dedicated server, but I have another question:
Someone could confirm: what is the algorithm that uses europecoin?
Thanks for your answers and attention
Please have a look at the blockexplorer: https://chainz.cryptoid.info/erc/#!crypto1GB AES Pattern Search (PoW) + Proof of Stake Greetz Steve not proof of stake but rest is ok have fun Matthias .
|
|
|
|
teosanru
|
|
December 20, 2016, 10:57:08 PM |
|
I informed that I could do the installation of the wallet europecoin v3 on my dedicated server, but I have another question:
Someone could confirm: what is the algorithm that uses europecoin?
Thanks for your answers and attention
Please have a look at the blockexplorer: https://chainz.cryptoid.info/erc/#!crypto1GB AES Pattern Search (PoW) + Proof of Stake Greetz Steve The erc algorithm is not hodl? I thought I read before it was hodl, so my question
|
|
|
|
szenekonzept (OP)
Legendary
Offline
Activity: 2100
Merit: 1012
Europecoin Financecloud API
|
|
December 20, 2016, 11:14:36 PM |
|
I informed that I could do the installation of the wallet europecoin v3 on my dedicated server, but I have another question:
Someone could confirm: what is the algorithm that uses europecoin?
Thanks for your answers and attention
Please have a look at the blockexplorer: https://chainz.cryptoid.info/erc/#!crypto1GB AES Pattern Search (PoW) + Proof of Stake Greetz Steve The erc algorithm is not hodl? I thought I read before it was hodl, so my question thats right hodl IS "1GB AES Pattern Search (POW)" so yes, we are having the same algorithm hodl is a coin, not an algorithm have fun Matthias .
|
|
|
|
Fuzzbawls
|
|
December 21, 2016, 12:04:24 AM |
|
Hello, First, let's make sure we all are speaking about the same things. Please quote here the exact text of the error you encountered. I'm sure we can make it work. I will show the steps that I followed and I think they are not very clear I followed them to the letter1) # get the source user@machine:~$ git clone https://github.com/LIMXTEC/Europecoin-V3 Europecoin-V3src/ # actually go there user@machine:~$ cd Europecoin-V3src/ *In the first step is very clear, and I have done it without problems
Here it is not clear to me that it is done from step 1 to 2? Because in step 1 it says that I should use user @ machine: ~ $ cd Europecoin-V3src / But in step 2 when you must give the permission and the rest you are here: User @ machine: ~ $ and not here: user @ machine: ~ / Europecoin-V3src $ / In which folder should it be located to give those permissions and update what was described in the step?2) # I needed to explicitly grant "execute" permission to all shell scripts in the source tree. # I know, I'm lazy... # YMMV. user@machine:~$ chmod -Rc +x ./*.sh user@machine:~$ chmod -Rc +x ./*/*.sh user@machine:~$ chmod -Rc +x ./*/*/*.sh user@machine:~$ chmod -Rc +x ./*/*/build_detect_platform user@machine:~$ ./autogen.sh user@machine:~$ ./configure user@machine:~$ make *In number 3 is also unclear on which folder should I place to do this So it tells me that the files do not exist. If I do it here: "User @ machine: ~ $" and not in: "user@machine:~/Europecoin-V3src:~/scr$"
3. user@machine:~$ strip europecoind user@machine:~$ strip europecoin-cli user@machine:~$ strip europecoin-tx user@machine:~$ strip qt/europecoin-qt # just making sure it will run user@machine:~$ chmod +x qt/europecoin-qt * What would be the command to execute the demon
I've tried this: Cd Europecoin-V3src / src ./europecoind
When I do, I say this:
/home/pool/.europecoin/europecoin.conf It is recommended you use the following random password: rpcuser=bitcoinrpc rpcpassword=DPmgz5R8jwZzpEAaoGQNMFQhjS9aTnoCEkhNpeJdCeg7 (you do not need to remember this password) The username and password MUST NOT be the same. If the file does not exist, create it with owner-readable-only file permissions. It is also recommended to set alertnotify so you are notified of problems; for example: alertnotify=echo %s | mail -s "EuropeCoin Alert" admin@foo.com
Looking at the path that tells me I see that the folder "europecoin" has a dot in front of the name: ".europecoin" which makes this hidden and inaccessible, how can I do from console that this folder has the name without the point? Because I do not know how to remove that point I resort to this: I create the file with this command: Sudo nano /home/pool/.europecoin/europecoin.CONF I save it and run it again Cd Europecoin-V3src / src ./europecoind And give me the same message that I create the file europecoin.conf4) # if you want the binaries copied to /usr/local/bin user@machine:~$ make install *This is also not clear to me, I am new to linux, I appreciate the help
I pay 200 ERC for a good explain. Fetching and compiling the source (assumes you have all the dependencies):cd git clone https://github.com/LIMXTEC/Europecoin-V3.git Europecoin-V3src/ cd Europecoin-V3src/ chmod -Rc +x ./*.sh chmod -Rc +x ./*/*.sh chmod -Rc +x ./*/*/*.sh chmod -Rc +x ./*/*/build_detect_platform ./autogen.sh ./configure make make install
*the last line is optional, and may need to be ran with root privs by running 'sudo make install' Running the compiled binaries:if you DID NOT do the last optional compile step, then after compilation finishes, and from the same directory that the compilation steps were done in: ./src/europecoind (starts the headless daemon) ./src/europecoin-cli (CLI program to issue RPC commands like 'getinfo', 'stop', etc) ./src/qt/europecoin-qt (starts the QT GUI wallet)
if you DID do the last optional compile step (make install), then you can use the following terminal commands from any directory: europecoind (starts the headless daemon) europecoin-cli (CLI program to issue RPC commands like 'getinfo', 'stop', etc) europecoin-qt (starts the QT GUI wallet)
Setting up the conf file:You can access/create/edit the conf file from the terminal using the following commands: cd ~/.europecoin/ vi europecoin.conf
*If you don't like vi, you can use nano instead (may be easier for first-time users): 'nano europecoin.conf' Minimum recommended entries for the conf file are as follows: rpcuser=xxx rpcpassword=xxx daemon=1 server=1 listen=1
*replace the strings of 'xxx' with whatever you desire BONUS - Download the pre-compiled linux 64-bit binaries:If all else fails, and you would rather just download the pre-compiled binaries, follow the following steps wget https://github.com/LIMXTEC/Europecoin-V3/releases/download/Europecoin_V3.0.1.0.1/Europecoin-Linux64.zip unzip Europecoin-Linux64.zip cp europecoin* /usr/local/bin/
*if the last step fails with a permission error, instead run 'sudo cp europecoin* /usr/local/bin/ Then, to run: europecoind (starts the headless daemon) europecoin-cli (CLI program to issue RPC commands like 'getinfo', 'stop', etc) europecoin-qt (starts the QT GUI wallet)
|
|
|
|
szenekonzept (OP)
Legendary
Offline
Activity: 2100
Merit: 1012
Europecoin Financecloud API
|
|
December 21, 2016, 12:46:20 AM |
|
@Fuzzbawls thank you for this have fun Matthias .
|
|
|
|
metamorphin
Legendary
Offline
Activity: 1106
Merit: 1004
No risk, no fun!
|
|
December 21, 2016, 01:17:25 AM |
|
Beautiful first days of localcrypto.eu.org
|
|
|
|
teosanru
|
|
December 21, 2016, 01:43:19 AM |
|
I informed that I could do the installation of the wallet europecoin v3 on my dedicated server, but I have another question:
Someone could confirm: what is the algorithm that uses europecoin?
Thanks for your answers and attention
Please have a look at the blockexplorer: https://chainz.cryptoid.info/erc/#!crypto1GB AES Pattern Search (PoW) + Proof of Stake Greetz Steve The erc algorithm is not hodl? I thought I read before it was hodl, so my question thats right hodl IS "1GB AES Pattern Search (POW)" so yes, we are having the same algorithm hodl is a coin, not an algorithm have fun Matthias . You mean the algorithm is: POW? So is the name of the algorithm of this Cryptocurrencie? Is what I want to know. thank you for your answer
|
|
|
|
Fuzzbawls
|
|
December 21, 2016, 01:49:36 AM |
|
I informed that I could do the installation of the wallet europecoin v3 on my dedicated server, but I have another question:
Someone could confirm: what is the algorithm that uses europecoin?
Thanks for your answers and attention
Please have a look at the blockexplorer: https://chainz.cryptoid.info/erc/#!crypto1GB AES Pattern Search (PoW) + Proof of Stake Greetz Steve The erc algorithm is not hodl? I thought I read before it was hodl, so my question thats right hodl IS "1GB AES Pattern Search (POW)" so yes, we are having the same algorithm hodl is a coin, not an algorithm have fun Matthias . You mean the algorithm is: POW? So is the name of the algorithm of this Cryptocurrencie? Is what I want to know. thank you for your answer there is no set fancy name for the algorithm that ERC uses. just "1GB AES Pattern Search", which is a PoW hashing method. A similar hashing method / algorithm a couple years back was once referred to as "Momentum", but this was slightly different than what is being used here.
|
|
|
|
teosanru
|
|
December 21, 2016, 02:47:25 AM |
|
I informed that I could do the installation of the wallet europecoin v3 on my dedicated server, but I have another question:
Someone could confirm: what is the algorithm that uses europecoin?
Thanks for your answers and attention
Please have a look at the blockexplorer: https://chainz.cryptoid.info/erc/#!crypto1GB AES Pattern Search (PoW) + Proof of Stake Greetz Steve The erc algorithm is not hodl? I thought I read before it was hodl, so my question thats right hodl IS "1GB AES Pattern Search (POW)" so yes, we are having the same algorithm hodl is a coin, not an algorithm have fun Matthias . You mean the algorithm is: POW? So is the name of the algorithm of this Cryptocurrencie? Is what I want to know. thank you for your answer there is no set fancy name for the algorithm that ERC uses. just "1GB AES Pattern Search", which is a PoW hashing method. A similar hashing method / algorithm a couple years back was once referred to as "Momentum", but this was slightly different than what is being used here. But must have a name that algorithm? As well as ltc its algorithm has as name scrypt, which is the name of the algorithm for europecoin that my concrete question, thanks for the answers
|
|
|
|
szenekonzept (OP)
Legendary
Offline
Activity: 2100
Merit: 1012
Europecoin Financecloud API
|
|
December 21, 2016, 03:13:33 AM |
|
I informed that I could do the installation of the wallet europecoin v3 on my dedicated server, but I have another question:
Someone could confirm: what is the algorithm that uses europecoin?
Thanks for your answers and attention
Please have a look at the blockexplorer: https://chainz.cryptoid.info/erc/#!crypto1GB AES Pattern Search (PoW) + Proof of Stake Greetz Steve The erc algorithm is not hodl? I thought I read before it was hodl, so my question thats right hodl IS "1GB AES Pattern Search (POW)" so yes, we are having the same algorithm hodl is a coin, not an algorithm have fun Matthias . You mean the algorithm is: POW? So is the name of the algorithm of this Cryptocurrencie? Is what I want to know. thank you for your answer there is no set fancy name for the algorithm that ERC uses. just "1GB AES Pattern Search", which is a PoW hashing method. A similar hashing method / algorithm a couple years back was once referred to as "Momentum", but this was slightly different than what is being used here. But must have a name that algorithm? As well as ltc its algorithm has as name scrypt, which is the name of the algorithm for europecoin that my concrete question, thanks for the answers Sorry but the NAME is REALLY: "AES PATTERN SEARCH", you can even look it up for hodl, who states the same in his specification. You just did not see it anywhere else, because we are the only ones, which are having this great algorithm. Its the latest and greatest state of the art have fun Matthias .
|
|
|
|
teosanru
|
|
December 21, 2016, 03:24:28 AM |
|
I informed that I could do the installation of the wallet europecoin v3 on my dedicated server, but I have another question:
Someone could confirm: what is the algorithm that uses europecoin?
Thanks for your answers and attention
Please have a look at the blockexplorer: https://chainz.cryptoid.info/erc/#!crypto1GB AES Pattern Search (PoW) + Proof of Stake Greetz Steve The erc algorithm is not hodl? I thought I read before it was hodl, so my question thats right hodl IS "1GB AES Pattern Search (POW)" so yes, we are having the same algorithm hodl is a coin, not an algorithm have fun Matthias . You mean the algorithm is: POW? So is the name of the algorithm of this Cryptocurrencie? Is what I want to know. thank you for your answer there is no set fancy name for the algorithm that ERC uses. just "1GB AES Pattern Search", which is a PoW hashing method. A similar hashing method / algorithm a couple years back was once referred to as "Momentum", but this was slightly different than what is being used here. But must have a name that algorithm? As well as ltc its algorithm has as name scrypt, which is the name of the algorithm for europecoin that my concrete question, thanks for the answers Sorry but the NAME is REALLY: "AES PATTERN SEARCH", you can even look it up for hodl, who states the same in his specification. You just did not see it anywhere else, because we are the only ones, which are having this great algorithm. Its the latest and greatest state of the art have fun Matthias . in this site: X11 http://coinofview.com/coin/Europecoin.html, In fact, mining for swimming uses the miner for hodl
|
|
|
|
Fuzzbawls
|
|
December 21, 2016, 03:39:52 AM |
|
I wouldn't recommend using any kind of mining equipment (CPU/GPU/FPGA/ASIC) while swimming. coinofview appears to still be running ERCv2, which is depreciated, and all the information is inaccurate.
|
|
|
|
szenekonzept (OP)
Legendary
Offline
Activity: 2100
Merit: 1012
Europecoin Financecloud API
|
|
December 21, 2016, 03:54:07 AM |
|
But must have a name that algorithm? As well as ltc its algorithm has as name scrypt, which is the name of the algorithm for europecoin that my concrete question, thanks for the answers
Sorry but the NAME is REALLY: "AES PATTERN SEARCH", you can even look it up for hodl, who states the same in his specification. You just did not see it anywhere else, because we are the only ones, which are having this great algorithm. Its the latest and greatest state of the art have fun Matthias . in this site: X11 http://coinofview.com/coin/Europecoin.html, In fact, mining for swimming uses the miner for hodl
X11 was our old algo, they are not up to date. I notified them often, but no response, in fact many sites are not up to date, which is quite distracting for users and not good for crypto.
Better strick with the announcement of this thread: https://bitcointalk.org/index.php?topic=901605.0
or with our website http://www.europecoin.eu.org
as an information source we are always up to date and responsive
for mining: hodl miner is the right choice, here is the mining guide: http://www.europecoin.eu.org/component/content/article/123-europecoin-knowledge-base/801-europecoin-mining-guide
have fun Matthias
.
|
|
|
|
teosanru
|
|
December 21, 2016, 03:55:49 AM |
|
I wouldn't recommend using any kind of mining equipment (CPU/GPU/FPGA/ASIC) while swimming. coinofview appears to still be running ERCv2, which is depreciated, and all the information is inaccurate. But if it is x11? Because several sites have read that that is its algorithm, but the pool that exists uses hodl miner, so my question of what is the name of its algorithm. Maybe this coin can be mined with GPU? I've only seen, mining with CPU with the same software with which hodl is mine
|
|
|
|
teosanru
|
|
December 21, 2016, 03:57:49 AM |
|
But must have a name that algorithm? As well as ltc its algorithm has as name scrypt, which is the name of the algorithm for europecoin that my concrete question, thanks for the answers
Sorry but the NAME is REALLY: "AES PATTERN SEARCH", you can even look it up for hodl, who states the same in his specification. You just did not see it anywhere else, because we are the only ones, which are having this great algorithm. Its the latest and greatest state of the art have fun Matthias . in this site: X11 http://coinofview.com/coin/Europecoin.html, In fact, mining for swimming uses the miner for hodl
X11 was our old algo, they are not up to date. I notified them often, but no response, in fact many sites are not up to date, which is quite distracting for users and not good for crypto.
Better strick with the announcement of this thread: https://bitcointalk.org/index.php?topic=901605.0
or with our website http://www.europecoin.eu.org
as an information source we are always up to date and responsive
for mining: hodl miner is the right choice, here is the mining guide: http://www.europecoin.eu.org/component/content/article/123-europecoin-knowledge-base/801-europecoin-mining-guide
have fun Matthias
.Then the name of the algorithm would be POW?
|
|
|
|
|