neoscrypt algo for ccminer and nvidia card: call for donation

[tbearhere]

Latest lyra.
Still on the 750ti ..the one that has the video out hooked up for this computer ...low hash.
But it will have 450kh/s if I put it on my rig. For some reason the hash is very low on the card that has video out used.
My rig has no video out hooked up so it will give 450kh/s per 750ti  no over clocking.
I'll try on my rig later.

the driver of that card has probably crashed at some point. You should reboot your rig.
If it isn't enough try also to add --throughput 3

Yes thank you djm ..right now i'm having major problems with anything related to display. My computer( video ) is flashing on and off and 2 more cards seem to die..total of three. I have 4 cards on this computer. ... and my last card on this computer isn't working properly... still flashing on and off. Still working just to get my display to work properly. My display setting is the same before the crash and web pages and video movies are fine but the icons are extremely big and it's still flashing on and off once in awhile. This flashing on and off has been happening for a long time, but yesterday ... complete crash. So I took out the 3 cards and put this 4th card on the mobo all by itself. I'm going to do a clean reinstall the latest driver again and see if that works.
I noticed when I had the 4 cards working, and mined with the first version, that the hashrate was good on 3 cards but one was very low like shown here. It must be the one on the mobo that's doing the low hashrate so I'll try --throughput 3 when I can.

EDIT: --throughput 3  seems to work ... got 147kh/s ...now reinstalling the drivers.

(sorry...) you beat us all regarding computer problems  

Are you sure the monitor cable is properly plugged, this can cause this kind of effect especially with those dvi cable which are particularly heavy.

That's not all...   my mouse drivers won't work properly and some other issues too like my icons load twice on bootup... Have to call HP support and microsoft .. Maybe my cards are ok..
EDIT: Yes thx the hdmi cable seems fine. And doing   sfc /scannow    command ... may help.

Ok sfc /scannow worked and one card crashed and died so I had to reinstall precision x and drivers. A lot of corrupted files .. most were repaired. The flashing has almost stopped ..but computer working 99% better. The flashing maybe my monitor.

[djm34]

Latest lyra.
Still on the 750ti ..the one that has the video out hooked up for this computer ...low hash.
But it will have 450kh/s if I put it on my rig. For some reason the hash is very low on the card that has video out used.
My rig has no video out hooked up so it will give 450kh/s per 750ti  no over clocking.
I'll try on my rig later.

the driver of that card has probably crashed at some point. You should reboot your rig.
If it isn't enough try also to add --throughput 3

Yes thank you djm ..right now i'm having major problems with anything related to display. My computer( video ) is flashing on and off and 2 more cards seem to die..total of three. I have 4 cards on this computer. ... and my last card on this computer isn't working properly... still flashing on and off. Still working just to get my display to work properly. My display setting is the same before the crash and web pages and video movies are fine but the icons are extremely big and it's still flashing on and off once in awhile. This flashing on and off has been happening for a long time, but yesterday ... complete crash. So I took out the 3 cards and put this 4th card on the mobo all by itself. I'm going to do a clean reinstall the latest driver again and see if that works.
I noticed when I had the 4 cards working, and mined with the first version, that the hashrate was good on 3 cards but one was very low like shown here. It must be the one on the mobo that's doing the low hashrate so I'll try --throughput 3 when I can.

EDIT: --throughput 3  seems to work ... got 147kh/s ...now reinstalling the drivers.

(sorry...) you beat us all regarding computer problems 

Are you sure the monitor cable is properly plugged, this can cause this kind of effect especially with those dvi cable which are particularly heavy.

That's not all...  my mouse drivers won't work properly and some other issues too like my icons load twice on bootup... Have to call HP support and microsoft .. Maybe my cards are ok..
EDIT: Yes thx the hdmi cable seems fine. And doing   sfc /scannow    command ... may help.

Ok sfc /scannow worked and one card crashed and died so I had to reinstall precision x and drivers. A lot of corrupted files .. most were repaired. The flashing has almost stopped ..but computer working 99% better. The flashing maybe my monitor.

If there are many corrupted files, may-be reinstalling the whole system could help (could be a hdd problem too... since it is rather frequent in your case).
What you should do is to reinstall the whole system, then back it up using norton ghost or else and each time a problem happen just use the back up to do a clean install...

[joeybada$$]

Date: 2/10/2015 22:41
To: 18UZRrybgjmR4M53Aca4Q8YBguqErZ5qaP
Debit: -0.02 BTC
Transaction fee: -0.0002 BTC
Net amount: -0.0202 BTC
Transaction ID: e35e9d3fe347cdf9130905a4cdb206d70c1f62dfbf84018e230e296671c6cf61


sent in donation

[GES]

this algorithm not favorable especially so also the paid was made by a mayner, here what sense to pay if it is easier to take not new 290kh and to rejoice?

it was favorable when the bitok cost 700-1000 dollars and now sense from mayner to exhaust the last money?

[djm34]

this algorithm not favorable especially so also the paid was made by a mayner, here what sense to pay if it is easier to take not new 290kh and to rejoice?

it was favorable when the bitok cost 700-1000 dollars and now sense from mayner to exhaust the last money?

your message doesn't make any sense at all....and I am not a mayner (whatever it is is) and if you can't exhaust 0.02 bitok in my direction, well you won't the algo... and seriously like if 0.02bitok was like exhausting the last money...  

to take not new 290kh and to rejoice   

[thevictimofuktyranny]

djm34  

Are you making anymore progress on getting the hashrate higher on Nvidia 750ti cards?

Thanks

[djm34]

djm34 

Are you making anymore progress on getting the hashrate higher on Nvidia 750ti cards?

Thanks

not for the moment, the next stage to get some significant increases will require a complete rewrite of some of the algo...
The problem at the moment is more to get it to work with compute 3.0... (even though, the speed won't be great...)

[thevictimofuktyranny]

djm34 

Are you making anymore progress on getting the hashrate higher on Nvidia 750ti cards?

Thanks

not for the moment, the next stage to get some significant increases will require a complete rewrite of some of the algo...
The problem at the moment is more to get it to work with compute 3.0... (even though, the speed won't be great...)

I would imagine, though I cannot be say with any confidence

Trying to add support for legacy cards is going to be a waste of time, if you are going to need to re-write the algo to improve performance

[rednoW]

Trying to add support for legacy cards is going to be a waste of time,

It is, without any 'if' ...

[djm34]

Trying to add support for legacy cards is going to be a waste of time,

It is, without any 'if' ...

except there are people with older card who have donated...
also  600/700 serie cards can't really be considered as legacy either...

[tbearhere]

Latest lyra.
Still on the 750ti ..the one that has the video out hooked up for this computer ...low hash.
But it will have 450kh/s if I put it on my rig. For some reason the hash is very low on the card that has video out used.
My rig has no video out hooked up so it will give 450kh/s per 750ti  no over clocking.
I'll try on my rig later.

the driver of that card has probably crashed at some point. You should reboot your rig.
If it isn't enough try also to add --throughput 3

Yes thank you djm ..right now i'm having major problems with anything related to display. My computer( video ) is flashing on and off and 2 more cards seem to die..total of three. I have 4 cards on this computer. ... and my last card on this computer isn't working properly... still flashing on and off. Still working just to get my display to work properly. My display setting is the same before the crash and web pages and video movies are fine but the icons are extremely big and it's still flashing on and off once in awhile. This flashing on and off has been happening for a long time, but yesterday ... complete crash. So I took out the 3 cards and put this 4th card on the mobo all by itself. I'm going to do a clean reinstall the latest driver again and see if that works.
I noticed when I had the 4 cards working, and mined with the first version, that the hashrate was good on 3 cards but one was very low like shown here. It must be the one on the mobo that's doing the low hashrate so I'll try --throughput 3 when I can.

EDIT: --throughput 3  seems to work ... got 147kh/s ...now reinstalling the drivers.

(sorry...) you beat us all regarding computer problems  

Are you sure the monitor cable is properly plugged, this can cause this kind of effect especially with those dvi cable which are particularly heavy.

That's not all...   my mouse drivers won't work properly and some other issues too like my icons load twice on bootup... Have to call HP support and microsoft .. Maybe my cards are ok..
EDIT: Yes thx the hdmi cable seems fine. And doing   sfc /scannow    command ... may help.

Ok sfc /scannow worked and one card crashed and died so I had to reinstall precision x and drivers. A lot of corrupted files .. most were repaired. The flashing has almost stopped ..but computer working 99% better. The flashing maybe my monitor.

If there are many corrupted files, may-be reinstalling the whole system could help (could be a hdd problem too... since it is rather frequent in your case).
What you should do is to reinstall the whole system, then back it up using norton ghost or else and each time a problem happen just use the back up to do a clean install...

Sorry been so long. I fixed most up in 2 hrs.....card burned out and it crashed drivers and evga precision x and there where alot of corrupted files. The flashing is my cheap tv monitor ...it even flashes to a different channel sometimes.  
Now I get 66% rejects at nice hash but hash rate looks like this. No overclocking.

[thevictimofuktyranny]

Latest lyra.
Still on the 750ti ..the one that has the video out hooked up for this computer ...low hash.
But it will have 450kh/s if I put it on my rig. For some reason the hash is very low on the card that has video out used.
My rig has no video out hooked up so it will give 450kh/s per 750ti  no over clocking.
I'll try on my rig later.

the driver of that card has probably crashed at some point. You should reboot your rig.
If it isn't enough try also to add --throughput 3

Yes thank you djm ..right now i'm having major problems with anything related to display. My computer( video ) is flashing on and off and 2 more cards seem to die..total of three. I have 4 cards on this computer. ... and my last card on this computer isn't working properly... still flashing on and off. Still working just to get my display to work properly. My display setting is the same before the crash and web pages and video movies are fine but the icons are extremely big and it's still flashing on and off once in awhile. This flashing on and off has been happening for a long time, but yesterday ... complete crash. So I took out the 3 cards and put this 4th card on the mobo all by itself. I'm going to do a clean reinstall the latest driver again and see if that works.
I noticed when I had the 4 cards working, and mined with the first version, that the hashrate was good on 3 cards but one was very low like shown here. It must be the one on the mobo that's doing the low hashrate so I'll try --throughput 3 when I can.

EDIT: --throughput 3  seems to work ... got 147kh/s ...now reinstalling the drivers.

(sorry...) you beat us all regarding computer problems  

Are you sure the monitor cable is properly plugged, this can cause this kind of effect especially with those dvi cable which are particularly heavy.

That's not all...   my mouse drivers won't work properly and some other issues too like my icons load twice on bootup... Have to call HP support and microsoft .. Maybe my cards are ok..
EDIT: Yes thx the hdmi cable seems fine. And doing   sfc /scannow    command ... may help.

Ok sfc /scannow worked and one card crashed and died so I had to reinstall precision x and drivers. A lot of corrupted files .. most were repaired. The flashing has almost stopped ..but computer working 99% better. The flashing maybe my monitor.

If there are many corrupted files, may-be reinstalling the whole system could help (could be a hdd problem too... since it is rather frequent in your case).
What you should do is to reinstall the whole system, then back it up using norton ghost or else and each time a problem happen just use the back up to do a clean install...

Sorry been so long. I fixed most up in 2 hrs.....card burned out and it crashed drivers and evga precision x and there where alot of corrupted files. The flashing is my cheap tv monitor ...it even flashes to a different channel sometimes.  
Now I get 66% rejects at nice hash but hash rate looks like this. No overclocking.

Hi, you need to mine directly at "The Block Factory", they have neoscrypt coins IPC, FTC, GUN, PXI. Currently, FTC is paying the most compared to Nicehash (2.89BTC per GHs at current average difficulty of 8.5).

You get 100% acceptance rate, unfortunately, there are few problems with Nicehash; it has a poor acceptance rate.

Bat file:
ccminer.exe -a neoscrypt -o stratum+tcp://fr.ftc.theblocksfactory.com:3333  -u djm34.1_diff128  -p password -d 0,1 --throughput 3.5

 

[djm34]

Latest lyra.
Still on the 750ti ..the one that has the video out hooked up for this computer ...low hash.
But it will have 450kh/s if I put it on my rig. For some reason the hash is very low on the card that has video out used.
My rig has no video out hooked up so it will give 450kh/s per 750ti  no over clocking.
I'll try on my rig later.

the driver of that card has probably crashed at some point. You should reboot your rig.
If it isn't enough try also to add --throughput 3

Yes thank you djm ..right now i'm having major problems with anything related to display. My computer( video ) is flashing on and off and 2 more cards seem to die..total of three. I have 4 cards on this computer. ... and my last card on this computer isn't working properly... still flashing on and off. Still working just to get my display to work properly. My display setting is the same before the crash and web pages and video movies are fine but the icons are extremely big and it's still flashing on and off once in awhile. This flashing on and off has been happening for a long time, but yesterday ... complete crash. So I took out the 3 cards and put this 4th card on the mobo all by itself. I'm going to do a clean reinstall the latest driver again and see if that works.
I noticed when I had the 4 cards working, and mined with the first version, that the hashrate was good on 3 cards but one was very low like shown here. It must be the one on the mobo that's doing the low hashrate so I'll try --throughput 3 when I can.

EDIT: --throughput 3  seems to work ... got 147kh/s ...now reinstalling the drivers.

(sorry...) you beat us all regarding computer problems  

Are you sure the monitor cable is properly plugged, this can cause this kind of effect especially with those dvi cable which are particularly heavy.

That's not all...   my mouse drivers won't work properly and some other issues too like my icons load twice on bootup... Have to call HP support and microsoft .. Maybe my cards are ok..
EDIT: Yes thx the hdmi cable seems fine. And doing   sfc /scannow    command ... may help.

Ok sfc /scannow worked and one card crashed and died so I had to reinstall precision x and drivers. A lot of corrupted files .. most were repaired. The flashing has almost stopped ..but computer working 99% better. The flashing maybe my monitor.

If there are many corrupted files, may-be reinstalling the whole system could help (could be a hdd problem too... since it is rather frequent in your case).
What you should do is to reinstall the whole system, then back it up using norton ghost or else and each time a problem happen just use the back up to do a clean install...

Sorry been so long. I fixed most up in 2 hrs.....card burned out and it crashed drivers and evga precision x and there where alot of corrupted files. The flashing is my cheap tv monitor ...it even flashes to a different channel sometimes.  
Now I get 66% rejects at nice hash but hash rate looks like this. No overclocking.

you need to use "--diff 0.5" (was already mentioned on the thread) (or alternatively blockfactory without difficulty adjustment)

[tbearhere]

Now I get 66% rejects at nice hash but hash rate looks like this. No overclocking.

[/quote]
you need to use "--diff 0.5" (was already mentioned on the thread) (or alternatively blockfactory without difficulty adjustment)
[/quote]
That gave me 0% but hash showed good on the command window. Reading back in the thread to see the --diff 0.5.

ccminer.exe -a neoscrypt   --throughput 3 -o stratum+tcp://stratum.nicehash.com:3341

EDIT:  Ok for my 750ti no oc working 100%       ccminer.exe -a neoscrypt   --throughput 3  --diff 0.5  -o stratum+tcp://stratum.nicehash.com:3341
That did it djm ...thanks

[tbearhere]

[/quote]

Hi, you need to mine directly at "The Block Factory", they have neoscrypt coins IPC, FTC, GUN, PXI. Currently, FTC is paying the most compared to Nicehash (2.89BTC per GHs at current average difficulty of 8.5).

You get 100% acceptance rate, unfortunately, there are few problems with Nicehash; it has a poor acceptance rate.

Bat file:
ccminer.exe -a neoscrypt -o stratum+tcp://fr.ftc.theblocksfactory.com:3333  -u djm34.1_diff128  -p password -d 0,1 --throughput 3.5

 
[/quote]
@thevictimofuktyranny  thanks

[IncludeBeer]

Hey all, is the crowdfunding for this still in progress?  I'd be more than happy to contribute to promising development like this if I can get my hands on such a smart miner

[djm34]

Hey all, is the crowdfunding for this still in progress?  I'd be more than happy to contribute to promising development like this if I can get my hands on such a smart miner

it has been a little slow but yes.
You'll get the miner if you give a small donation (0.02btc minimum)

[IncludeBeer]

Hey all, is the crowdfunding for this still in progress?  I'd be more than happy to contribute to promising development like this if I can get my hands on such a smart miner

it has been a little slow but yes.
You'll get the miner if you give a small donation (0.02btc minimum)

Great!  I just sent my donation.  Couldn't find where to see transaction ID on Bittrex though, so I took a screenshot :/

EDIT: Found the TxId! 9ae52cffc2fb476a9be03bdfa76049d6f7443cfc69a69557bb1b21c771b52fec

[IncludeBeer]

Just wanted to say I have the miner up and running on my gtx 980.  Very good work, djm34!  Keep it up, it's exciting to see developers making strides like this!

[Joltheadq]

donation 0.06 with https://blockchain.info/tx/f385d89d13d2f29408bc9cb35603a5995def12134e652518011c2cdcb1e39095