Lets say hello to lolMiner 1.17 (LINK)Was some longer coding this time since the re-coding of Navi codes took some serious time. But I like the result and hope to bring it to other cards as well in the future. We will see how it works out there I wish you all a Merry Christmas and a good start into 2021. Try to stay healthy! Windows Version? Read First note on link... Note: Windows version will be posted once the signing process is done
|
|
|
I think the 24hr volume worldwode of less than $35 total is a bigger problem for a miner on Mango. The price is bad..but with no real volume it is a mute point. No liquidity = no value.
For 1 BTC you can buy all the Mango that will ever be.
|
|
|
I have been able to continue mining after Epoch 382 with full rate:
Simplemining: --algo ETHASH --pool poolurl:port --user wallet.rigname --pass x --apiport 4444 --4g-alloc-size 4080
HiveOS: Add in extra parameters : --4g-alloc-size 4080
If 4080 doesn't work try 4076 you will loose 2Mhs.
Enjoy full Mhs
it doesnt work on my rig with 4GB gpus. I get this error: GPU 3: insufficient memory for DAG epoch 382. GPU 3: will be paused. I tried 4080 and 4076. Any other suggestion? For me it is resolved by removing "--keepfree" parameter Ive only got a few rigs with 4gb cards but they didnt like the size limit. I had to put —nocolor because in ssh the screen was all white. But other than a decrease in hash they still ticking away. I normally use --basecolor .Have you try it? Yes. but makes it white on black text. nocolor leaves them the setting on my terminal prog as they were.
|
|
|
I have been able to continue mining after Epoch 382 with full rate:
Simplemining: --algo ETHASH --pool poolurl:port --user wallet.rigname --pass x --apiport 4444 --4g-alloc-size 4080
HiveOS: Add in extra parameters : --4g-alloc-size 4080
If 4080 doesn't work try 4076 you will loose 2Mhs.
Enjoy full Mhs
it doesnt work on my rig with 4GB gpus. I get this error: GPU 3: insufficient memory for DAG epoch 382. GPU 3: will be paused. I tried 4080 and 4076. Any other suggestion? For me it is resolved by removing "--keepfree" parameter Ive only got a few rigs with 4gb cards but they didnt like the size limit. I had to put —nocolor because in ssh the screen was all white. But other than a decrease in hash they still ticking away.
|
|
|
Maybe take the payout to NH wallet but i sure wouldnt store ANY coins for anytime on a wallet i dont hold the seed. I would recommend moving them out at regular intervals based to tx costs and value. So yes figure out the fees and do what makes sense works for you. I dont use NiceHack and i only mine to wallets i hold the seed for. If NH holds the seed it is their wallet not yours.
1st rule of crypto...he who holds the seed holds the coins.
|
|
|
Is PhoenixMiner 5.4b legit, I dont see it mentioned here and when I downloaded it from the github page windows deleted a virus "Contebrew.A!ml" in the Phoenixminer.exe file Is this normal?
just above the link to mega.nz, download from there Thanks for that, my point exactly is on the MEGA URL there is no 5.4b and there is one here *** https://bitcointalk.org/index.php?topic=2647654.msg55807925#msg55807925on page 332 in the middle Sorry duplj30 tagged you trying to get rid of the fraudulent github link that DejavuUS posted. Have deleted and corrected as well as sent note to mods. I see we have all but one link left to remove. Thanks and again sorry for quoting your message as fraudulent.
|
|
|
Is PhoenixMiner 5.4b legit, I dont see it mentioned here and when I downloaded it from the github page windows deleted a virus "Contebrew.A!ml" in the Phoenixminer.exe file Is this normal?
just above the link to mega.nz, download from there Thanks for that, my point exactly is on the MEGA URL there is no 5.4b and there is one here FAKE GITHUB URL CLEANSED//github.com/ThePhoenixMiner/PhoenixMiner/releases On Dec 2nd in this thread PhoenixMiner stated : We do not have GitHub, and phoenixminer.org has nothing to do with us So if you are using the github it is not to be trusted. Here is link where Phoenixminer himself states this.... https://bitcointalk.org/index.php?topic=2647654.msg55731982#msg55731982
|
|
|
Hello all, I got this problem. Any advise? Please. Thank you
phoenix miner is not recognized as an internal or external command
You may not have it installed. You may not be in the right directory to execute it. If not move to the correct directory. If you are running windows then you may need to add it to the exclude list for software so defender doesnt stop it from running. More details would help.
|
|
|
Anybody look at the link Vosk link to buy the asic....goes to a site still claiming they will mine ETC....which is UNTRUE.
Then there is the whole..Vosk calling it Bitmain Innosilicon. Its one or the other...pretty sure it Innosilicon.
Why so many incorrect items?
|
|
|
I'm using an Asus Prime Z390-P motherboard and 6 MSI RX 580 ARMOR 8G OC video cards with Samsung memory for my rig. I have got four of the cards running fine, but the last two won't run together with the other four. I'm using Hive OS with Phoenixminer and ethermine.
The four cards that are running get 27.4 MH. Overclocking is set at 1050 900 1950 for each card. I did a bios mod by copying the 1750 timing to the 2000 timing and pasted it there using the Polaris bios editor.
If I take card five by itself and put it in PCI slot 1, it works fine. This scenario is the same for card six. I just can't get these two cards to run with the other four.
Bios settings:
- In System Agent Config, I enabled "above 4G Coding" - In Peg Port config, I changed PCIEX16_1 Link Speed to "Gen2" - In PCH Config/PCI Express Config, I changed PCIe Speed to "Gen2" - I also disabled HD audio and turned the power on for power loss functionality
Any clues why I can't get all six cards to work together? Does the MH seem low? I don't know any other way to mod the bios.
Make sure your M.2 ports are disabled. Looks like in block diagram they share pcie. Should be able to get 6 running.
|
|
|
You can usually pull the existing fan and read the label...then search Amazom/Alibaba/ Etc for a match or same spec fan. They are generally not having custom made fans but instead using an available unit to keep costs down.
Cooling down a asic miner isn't a joke, if you get anyhow fan the heat will be much, it's better if OP get a high quality fan for the asic miner, fan isn't fan, grades matter here or else your asic miner will over heat every hour and reboots over and over, you don't want to mess with asic cooling Did i say its a joke? No...maybe reread what i said. Yes i own some asics....bitmain BTC / ZEC / Sia asics. That is why i said look at the fan label. It gives the spec of the fan. Look that up and get the same or a same spec fans. There is no rocket science its fans. It is a measure of RPM / CFM / static pressure / V/W. I didnt say just get a fan....maybe you should work on reading comprehension.
|
|
|
You can usually pull the existing fan and read the label...then search Amazom/Alibaba/ Etc for a match or same spec fan. They are generally not having custom made fans but instead using an available unit to keep costs down.
|
|
|
Funny, even though eth e3 asics are done for, difficulty is not going down, actually is increasing faster than before. It's all time high at moment, https://etherscan.io/chart/difficulty . It seems eth price will rise in the next few days. I have E3's still hashing ... so they not done yet Are they 4gb units? or the larger ones.
|
|
|
Funny, even though eth e3 asics are done for, difficulty is not going down, actually is increasing faster than before. It's all time high at moment, https://etherscan.io/chart/difficulty . It seems eth price will rise in the next few days. Gee do you think it might be due to all the new GPUs coming on line.....
|
|
|
we need to ask bitmain to update the firmware so we can mine ETC.
It will NOT be fixed with firmware. The algo was modified to specifically remove asics from the ETC network. This would require entirely new chips for the unit. That dont exist and if they are developed ETC will change again. This is not a software problem. You seem to be having trouble accepting that etc does not want asics and will do whatever it takes to make them worthless on ETC. That is thier actual stance. They want gpu miners. Thus why they also rolled back the dag size.
|
|
|
Just to confirm you have MY ADDRESS as your actual wallet addy for beam right? just checking
|
|
|
I saw so many Mobile applications, youtube videos where i saw that people are doing mining through the mobile phone! Is it real? What's the logic behind this? According to my thinking... How is it possible to do mining through mobile phones?? There are so any powerful hardware.. Then people do mining in mobile phone through apps.. 🤔🤔🤔🤔
They are cloud base mining, the smartphone hardware won't be stressed out like when mining with a computer or graphic cards, the mobile miner will work like a mobile game or like every other apps, the logic looks like a real mining process but it's cloud mining Cloud based mining is a scam and not real.
|
|
|
Since I recently bought a series of A10 , I have to mention that the cards can not beat the simplicity of Asic and the lower power consumption plays great role in the high cost energy countries. Of course from the other side the resale value of cards is something important.
ASICs are a ruination for mining. But tempting to use for short term profits. They kill coin price time and time again. Manufacturers can simply flood the market with asics. They had done so more than once with more than one coin. BTC begs to differ.
|
|
|
ssh into the rig
cd /opt/miners/lolminer and should be the directory with the miner (if not do cd/opt/miners and the ls to see the miners) the .json file is there for the config and you can edit the config file for it using nano.
you can run the command from jgonzi as it is just manually executing the miner. You may have to do a disallow first to prevent ethos from trying to run it.
|
|
|
|