jgonzi
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 639
Merit: 19
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 14, 2020, 07:30:02 AM |
|
i wanna try this miner but it s says opencl.dll is missing
don't have that with the other miners
Can you put a screenshot and your config. That will help to give the solution. But I think you are in Windows and the solution is: Go to C:\Windows\System32\ and search for amdocl64.dll for OpenCL 2.1, x86_64. (There are also amdocl.dll for OpenCL 2.1, x86; amdocl12cl.dll for OpenCL 1.2, x86; and amdocl12cl64.dll for OpenCL 1.2, x86_64.) Look for the most recent file, right-click, click "Properties," and then select and copy the file's Location (which is the path to its directory). (Mine was in a subdirectory of C:\Windows\System32\DriverStore\FileRepository) Open regedit, aka the Registry Editor, (e.g. via Windows key+r, and entering regedit) Navigate to HKEY_LOCAL_MACHINE\SOFTWARE\Khronos\OpenCL\Vendors Create a new DWORD with the Name being the path from step 2 with \amdocl64.dll at the end (or whichever dll version you need or want), and leave the key's data at 0. My key's Name, for example, is C:\Windows\System32\DriverStore\FileRepository\u0336248.inf_amd64_107cc52c701c83d0\B336252\amdocl64.dll should now run.
|
|
|
|
Morph42
Jr. Member
Offline
Activity: 60
Merit: 2
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 14, 2020, 10:40:25 PM |
|
Yes these are the correct ones... You also need to know which program will you use for flashing... if you are in HiveOS/RaveOS you can use their system or in Windows the AtiFlash... The normal steps in resume are: - Extract BIOS (If you are in Windows you can use GPU-Z in RaveOS/HiveOS you can extract from website) - With the ROM Bios File apply directly the Polaris-bios-editor - 1 click - Reflash (Windows with Ati Flasher in Admin Mode and in RaveOS/Hiveos with his uploader). [/quote] It appears this must not be possible for me? I attempt to use MPT. I've backed up my current BIOS using GPUz, but when I attempt to load into MPT it states "not supported" Each rig is: Windows 10 x64 (12) AMD RX570 8G cards (current AMD driver 20.4.1, but 20.11.3 is available) lolminer 1.16a AMDTweak 1.1.0.3 Adding in a snapshot of my AMD via GPUz https://josh.lindemanns.ca/wp-content/uploads/2020/12/RX570.jpg
|
|
|
|
jgonzi
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 639
Merit: 19
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 14, 2020, 10:52:09 PM |
|
Yes these are the correct ones... You also need to know which program will you use for flashing... if you are in HiveOS/RaveOS you can use their system or in Windows the AtiFlash... The normal steps in resume are: - Extract BIOS (If you are in Windows you can use GPU-Z in RaveOS/HiveOS you can extract from website) - With the ROM Bios File apply directly the Polaris-bios-editor - 1 click - Reflash (Windows with Ati Flasher in Admin Mode and in RaveOS/Hiveos with his uploader). It appears this must not be possible for me? I attempt to use MPT. I've backed up my current BIOS using GPUz, but when I attempt to load into MPT it states "not supported" Each rig is: Windows 10 x64 (12) AMD RX570 8G cards (current AMD driver 20.4.1, but 20.11.3 is available) lolminer 1.16a AMDTweak 1.1.0.3 Adding in a snapshot of my AMD via GPUz https://josh.lindemanns.ca/wp-content/uploads/2020/12/RX570.jpg[/quote] To load MPT is not need it, but if you want it. You have to open More Power Tool (MPT) and save the file :-)
|
|
|
|
batsonxl
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 1200
Merit: 26
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 15, 2020, 06:46:42 AM |
|
Hi guys whats up? Can someone tell me please how to choose GPUS. for example i want to mine on gpu2 and gpu5. thanks
|
|
|
|
jgonzi
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 639
Merit: 19
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 15, 2020, 07:23:45 AM |
|
Hi guys whats up? Can someone tell me please how to choose GPUS. for example i want to mine on gpu2 and gpu5. thanks
You should try: --devices 2,5
|
|
|
|
batsonxl
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 1200
Merit: 26
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 15, 2020, 11:11:16 AM |
|
Hi guys whats up? Can someone tell me please how to choose GPUS. for example i want to mine on gpu2 and gpu5. thanks
You should try: --devices 2,5 Thanks ![Cool](https://bitcointalk.org/Smileys/default/cool.gif)
|
|
|
|
adaseb
Legendary
Offline
Activity: 3850
Merit: 1730
Up to 300% + 200 FS deposit bonuses
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 15, 2020, 07:09:31 PM |
|
Anyone here getting any stability issues with lolminer. My RX 470 4GB ran for weeks without crashing on PhoenixMiner but with lolminer, they run for a few hours and eventually they crash one by one. I tried upping the voltage but got the same issues.
I am using the default settings found in the config, is there anything I need to change to make it more stable? Wondering if anyone else is having issues on the older 4GB AMD cards?
|
|
|
|
jgonzi
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 639
Merit: 19
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 15, 2020, 07:45:32 PM |
|
Anyone here getting any stability issues with lolminer. My RX 470 4GB ran for weeks without crashing on PhoenixMiner but with lolminer, they run for a few hours and eventually they crash one by one. I tried upping the voltage but got the same issues.
I am using the default settings found in the config, is there anything I need to change to make it more stable? Wondering if anyone else is having issues on the older 4GB AMD cards?
Can you put a screenshot? To also know what are you mining?
|
|
|
|
adaseb
Legendary
Offline
Activity: 3850
Merit: 1730
Up to 300% + 200 FS deposit bonuses
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 15, 2020, 08:44:32 PM |
|
Anyone here getting any stability issues with lolminer. My RX 470 4GB ran for weeks without crashing on PhoenixMiner but with lolminer, they run for a few hours and eventually they crash one by one. I tried upping the voltage but got the same issues.
I am using the default settings found in the config, is there anything I need to change to make it more stable? Wondering if anyone else is having issues on the older 4GB AMD cards?
Can you put a screenshot? To also know what are you mining? The GPU just goes to 0MH/s and that's it. I am mining ETH with 4GB GPUs. There is no error or anything. When this happens restarting doesn't work, the rig hangs and you need to pretty much pull the power cord and then start the rig back up. It hashes again sometimes for 1-12 hours but eventually one GPU crashes, then another, then another. This never happened before with PhoenixMiner or Claymore. I am using PimpMyStraps running 1125/1950 clocks with 0.950V undervolt.
|
|
|
|
jgonzi
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 639
Merit: 19
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 15, 2020, 09:29:16 PM |
|
Anyone here getting any stability issues with lolminer. My RX 470 4GB ran for weeks without crashing on PhoenixMiner but with lolminer, they run for a few hours and eventually they crash one by one. I tried upping the voltage but got the same issues.
I am using the default settings found in the config, is there anything I need to change to make it more stable? Wondering if anyone else is having issues on the older 4GB AMD cards?
Can you put a screenshot? To also know what are you mining? The GPU just goes to 0MH/s and that's it. I am mining ETH with 4GB GPUs. There is no error or anything. When this happens restarting doesn't work, the rig hangs and you need to pretty much pull the power cord and then start the rig back up. It hashes again sometimes for 1-12 hours but eventually one GPU crashes, then another, then another. This never happened before with PhoenixMiner or Claymore. I am using PimpMyStraps running 1125/1950 clocks with 0.950V undervolt. I think is not a Core Problem... seen that 0.95V you can put 0.85V with 1125... could you try to reduce the memory to 1900 to make a test?.
|
|
|
|
jgonzi
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 639
Merit: 19
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 16, 2020, 12:32:47 AM |
|
I have been able to continue mining after Epoch 382 with full rate:
Simplemining: --algo ETHASH --pool poolurl:port --user wallet.rigname --pass x --apiport 4444 --4g-alloc-size 4080
HiveOS: Add in extra parameters : --4g-alloc-size 4080
If 4080 doesn't work try 4076 you will loose 2Mhs.
Enjoy full Mhs
|
|
|
|
bassistas
Newbie
Offline
Activity: 32
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 16, 2020, 12:53:00 AM |
|
I have been able to continue mining after Epoch 382 with full rate:
Simplemining: --algo ETHASH --pool poolurl:port --user wallet.rigname --pass x --apiport 4444 --4g-alloc-size 4080
HiveOS: Add in extra parameters : --4g-alloc-size 4080
If 4080 doesn't work try 4076 you will loose 2Mhs.
Enjoy full Mhs
it doesnt work on my rig with 4GB gpus. I get this error: GPU 3: insufficient memory for DAG epoch 382. GPU 3: will be paused. I tried 4080 and 4076. Any other suggestion?
|
|
|
|
jgonzi
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 639
Merit: 19
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 16, 2020, 12:53:48 AM |
|
I have been able to continue mining after Epoch 382 with full rate:
Simplemining: --algo ETHASH --pool poolurl:port --user wallet.rigname --pass x --apiport 4444 --4g-alloc-size 4080
HiveOS: Add in extra parameters : --4g-alloc-size 4080
If 4080 doesn't work try 4076 you will loose 2Mhs.
Enjoy full Mhs
it doesnt work on my rig with 4GB gpus. I get this error: GPU 3: insufficient memory for DAG epoch 382. GPU 3: will be paused. I tried 4080 and 4076. Any other suggestion? Yes 4072... go steps by 2
|
|
|
|
rvlad
Newbie
Offline
Activity: 8
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 16, 2020, 01:12:42 AM |
|
I have been able to continue mining after Epoch 382 with full rate:
Simplemining: --algo ETHASH --pool poolurl:port --user wallet.rigname --pass x --apiport 4444 --4g-alloc-size 4080
HiveOS: Add in extra parameters : --4g-alloc-size 4080
If 4080 doesn't work try 4076 you will loose 2Mhs.
Enjoy full Mhs
it doesnt work on my rig with 4GB gpus. I get this error: GPU 3: insufficient memory for DAG epoch 382. GPU 3: will be paused. I tried 4080 and 4076. Any other suggestion? For me it is resolved by removing "--keepfree" parameter
|
|
|
|
miner29
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 16, 2020, 01:21:05 AM |
|
I have been able to continue mining after Epoch 382 with full rate:
Simplemining: --algo ETHASH --pool poolurl:port --user wallet.rigname --pass x --apiport 4444 --4g-alloc-size 4080
HiveOS: Add in extra parameters : --4g-alloc-size 4080
If 4080 doesn't work try 4076 you will loose 2Mhs.
Enjoy full Mhs
it doesnt work on my rig with 4GB gpus. I get this error: GPU 3: insufficient memory for DAG epoch 382. GPU 3: will be paused. I tried 4080 and 4076. Any other suggestion? For me it is resolved by removing "--keepfree" parameter Ive only got a few rigs with 4gb cards but they didnt like the size limit. I had to put —nocolor because in ssh the screen was all white. But other than a decrease in hash they still ticking away.
|
|
|
|
jgonzi
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 639
Merit: 19
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 16, 2020, 01:31:35 AM |
|
I have been able to continue mining after Epoch 382 with full rate:
Simplemining: --algo ETHASH --pool poolurl:port --user wallet.rigname --pass x --apiport 4444 --4g-alloc-size 4080
HiveOS: Add in extra parameters : --4g-alloc-size 4080
If 4080 doesn't work try 4076 you will loose 2Mhs.
Enjoy full Mhs
it doesnt work on my rig with 4GB gpus. I get this error: GPU 3: insufficient memory for DAG epoch 382. GPU 3: will be paused. I tried 4080 and 4076. Any other suggestion? For me it is resolved by removing "--keepfree" parameter Ive only got a few rigs with 4gb cards but they didnt like the size limit. I had to put —nocolor because in ssh the screen was all white. But other than a decrease in hash they still ticking away. I normally use --basecolor .Have you try it?
|
|
|
|
miner29
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 16, 2020, 02:07:17 AM |
|
I have been able to continue mining after Epoch 382 with full rate:
Simplemining: --algo ETHASH --pool poolurl:port --user wallet.rigname --pass x --apiport 4444 --4g-alloc-size 4080
HiveOS: Add in extra parameters : --4g-alloc-size 4080
If 4080 doesn't work try 4076 you will loose 2Mhs.
Enjoy full Mhs
it doesnt work on my rig with 4GB gpus. I get this error: GPU 3: insufficient memory for DAG epoch 382. GPU 3: will be paused. I tried 4080 and 4076. Any other suggestion? For me it is resolved by removing "--keepfree" parameter Ive only got a few rigs with 4gb cards but they didnt like the size limit. I had to put —nocolor because in ssh the screen was all white. But other than a decrease in hash they still ticking away. I normally use --basecolor .Have you try it? Yes. but makes it white on black text. nocolor leaves them the setting on my terminal prog as they were.
|
|
|
|
Ortadan
Newbie
Offline
Activity: 13
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 16, 2020, 02:26:52 AM |
|
I have been able to continue mining after Epoch 382 with full rate:
Simplemining: --algo ETHASH --pool poolurl:port --user wallet.rigname --pass x --apiport 4444 --4g-alloc-size 4080
HiveOS: Add in extra parameters : --4g-alloc-size 4080
If 4080 doesn't work try 4076 you will loose 2Mhs.
Enjoy full Mhs
Excuse me is there any way to force that command only on some gpus? and leave the card that provides video with the value that the miner automatically assigns? I have a platform with 7 gpus that does not have integrated video and when I introduce the --4g-alloc-size 4080 command the main card does not have enough memory for the dag, but the other 6 gpus regenerate 30 mhs. However without adding the command the 7 gps start but each generates about 26 mhs, I already tried --4g-alloc-size 4076 and the main card does not have enough memory. I'm using rave o'am, I'm sorry my bad English
|
|
|
|
jgonzi
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 639
Merit: 19
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 16, 2020, 07:25:11 AM |
|
I have been able to continue mining after Epoch 382 with full rate:
Simplemining: --algo ETHASH --pool poolurl:port --user wallet.rigname --pass x --apiport 4444 --4g-alloc-size 4080
HiveOS: Add in extra parameters : --4g-alloc-size 4080
If 4080 doesn't work try 4076 you will loose 2Mhs.
Enjoy full Mhs
Excuse me is there any way to force that command only on some gpus? and leave the card that provides video with the value that the miner automatically assigns? I have a platform with 7 gpus that does not have integrated video and when I introduce the --4g-alloc-size 4080 command the main card does not have enough memory for the dag, but the other 6 gpus regenerate 30 mhs. However without adding the command the 7 gps start but each generates about 26 mhs, I already tried --4g-alloc-size 4076 and the main card does not have enough memory. I'm using rave o'am, I'm sorry my bad English You can run 2 instances and separate devices like : --devices 1,2,4,7 ... Also you can put the integrated GPU of the CPU if you have an Intel.
|
|
|
|
Lolliedieb (OP)
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 16, 2020, 12:08:21 PM |
|
Lets say hello to lolMiner 1.17 (LINK)Was some longer coding this time since the re-coding of Navi codes took some serious time. But I like the result and hope to bring it to other cards as well in the future. We will see how it works out there ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) I wish you all a Merry Christmas and a good start into 2021. Try to stay healthy!
|
Check out lolMiner 1.56, an efficient miner for Ethash, Beam and many Cuckoo-Cycle and Equihash variants for AMD & Nvidia cards at low fees.
|
|
|
|