RandomX is nice for mining it by GPUs? Oo All the others have no volume and you can get profit by 1-3 rigs. If you want to mine it seriously - you would sell your coins day by day. It`s better to try octopus.
RandomX algo works best on CPU but it works on GPU too, the truth is this algorithm works faster when using CPU to mine, even old third and fourth generation of intel CPU are still good for RandomX mining but Ryzen CPUs are the fastest and the most profitable for RandomX Yes. I`m surprised that it shows such results with GPU. I have no such GPUs but it looks like that TS mistakes. As i remember, there is no profit with GPU at RandomX, several cents may be. What makes you say that there is no profit mining RandomX with gpu? Veil is using randomX algorithm and it's the most profitable to mine now, even it beats Monero mining marginally, though I find octopus to be more profitable over all, Conflux token runs on octopus algorithm and it has better volume than veil Um your gpu gets what 1khs-2khs on randomx? i have a single cpu getting 15khs.... just because something can mine doesnt mean its efficient. Take say a single 1080 gpu its makes $1.70 on eth a day. Most i can find on whattomine or anywhere is maybe $0.65 a day on Veil. Then its only sellable if you are in the first $25k daily sold world wide. My cpu is doing 7x what a 1080 will do. All the volume is on probit exchange 90+% and it is a questionable exchange at the very least. WTH are you smokin?
|
|
|
try
show miner
this command will show the output from the miner and let is see what error you are actually getting.
Please advise version of Ethos you are running.
And change line
stratumproxy enabled
This may be your issue.
|
|
|
No gpus are cheaper right now.
I have a few are good cards but getting older. For eth you want to flahs the 64s with 56 bios (less power same hash). Thr will do about 50mhs on eth currently.
I would go with 5700xt over vega today if buying. They are about the same as a used vega on ebay but new.
|
|
|
Posted many times before...
Intel Mobo provisioning:
set VTd INTEL VIRTUALIZATION to DISABLE. set ONBOARD AUDIO/SOUND (AZALIA) to DISABLE. set IEEE1394 to DISABLE. set PCI-E SUBSYSTEM/LANES to x8/x4/x4 set ONBOARD GRAPHICS to DISABLE. set PCI-E GENERATION to GEN2. set CPU FREQUENCY SCALING to DISABLE. set CPU PERFORMANCE MODE to ENABLE. set FAST BOOT to DISABLE. set CSM to ENABLE.
Thanks for replying, are you saying this works as well? If yes how will one put it in motion? Can you explain how one will type all this into windows OS and active it? It looks like some kind of code base, please do try to give answer, we are all here to share knowledge, thanks This is in the biosonly settings. All my rigs are srt this way and tun no issue up to 13gpus. I set this way for linux ... windows may have other specific settings. YMMV.
|
|
|
i believe you will see the decrease in about 10 dags after the 4gb limit is actually hit. Maybe sooner depending on os etc. LOL posted a chart showing when it slowed and i want to say by like 7 dags its was down considerably. Ill try to locate it. Useful info....my 4gb are still going on linux. https://miro.medium.com/max/1272/1*0-s3IIh6azilwjnRjU9vsQ.png There is the chart. Looks like 50% is end of dec for windows and late jan 2021 for linux. You can mine longer but the penalty gets crazy. Better to mine something else and exchange for eth (or whatever you want).
|
|
|
Hello guys,
I am having issues with lolminer setup in ethos. Below my configuration file:
maxgputemp 85 stratumproxy miner #BEAM proxywallet my_adress.733d0f proxypool1 beam-eu.leafpool.com:3333 flags --cl-global-work 8192 --farm-recheck 200 fan 733d0f 25 35 30 45 35 28 globalminer lolminer safevolt disabled cor 733d0f 1150 1150 1150 1150 1150 1150 mem 733d0f 2150 2050 2050 2050 2050 2050 vlt 733d0f 900 850 850 850 850 850
Miner loads properly, it connects to the pool but it disconnect immediately after. Any suggest?
You will need to set the flags for lol mine (command line options) lolminer=flags —beam i put this after the globalminer lolminer line anything you need to set by command line option goes on the lolminer=flags (no spaces for that first part). OK many thanks for your reply. So going back to my config file I need to have something like this right? maxgputemp 85 stratumproxy miner #BEAM proxywallet my_adress.733d0f proxypool1 beam-eu.leafpool.com:3333 fan 733d0f 25 35 30 45 35 28 globalminer lolminer lolminer=flags --beam --cl-global-work 8192 --farm-recheck 200 safevolt disabled cor 733d0f 1150 1150 1150 1150 1150 1150 mem 733d0f 2150 2050 2050 2050 2050 2050 vlt 733d0f 900 850 850 850 850 850 lolminer=flags —coin beam flag —cl-global-work 8192 —farm-recheck 200 Adjust those 2 lines and should be good.
|
|
|
I've owned the Radeon 6990 before. Its basically a monster of a GPU. Its dual GPU and I think that beast can pull 600 Watts or so. The guy I bought it from mined actual BTC with that GPU and I've mined LTC, X11, ETH, ZEC, and XMR. That GPU basically refuses to die. Runs pretty much at 90C day and night. Blower fan running at 80% for maybe half a decade and still has good fan bearings.
That GPU and Radeon 7990, are actually limited production GPUs. They are rare and hold decent value. If yours is in mint shape you should hold it for another year or so and some collector will buy it on eBay. Currently the 7990 is going for $200 or so. Which makes no sense since its basically 2 of the Radeon 7970 (R9 280X) gpus which an overclocked RX 480 can pretty much beat.
The rest of those GPUs however are nothing special and you won't get much coin out of them.
as did I mine btc with my my 6990 how many bitcoins you mined with that? very interesting. i was reading old posts where people complaining about hd5830 that profit dropped from 1BTC to 0.6BTC for a DAY how crazy hd5830 could mine 1BTC a day. Used to be able to mine BTC using any desktop cpu....nothing special....
|
|
|
Nothing will happen. BCHA will slip back down as it already has to $0.13/TH where BTC is currently. BCHA is nothing without BTC.
|
|
|
Running a business in negative for 15 months in the hope of selling high later?
More like gambling than business.
All business is a gamble. The trick to business is not being in business...anyone can be in business. The trick to business is staying in business.
|
|
|
Posted many times before...
Intel Mobo provisioning:
set VTd INTEL VIRTUALIZATION to DISABLE. set ONBOARD AUDIO/SOUND (AZALIA) to DISABLE. set IEEE1394 to DISABLE. set PCI-E SUBSYSTEM/LANES to x8/x4/x4 set ONBOARD GRAPHICS to DISABLE. set PCI-E GENERATION to GEN2. set CPU FREQUENCY SCALING to DISABLE. set CPU PERFORMANCE MODE to ENABLE. set FAST BOOT to DISABLE. set CSM to ENABLE.
|
|
|
I want to be clear i was not advocating buying asics...was simply stating that it may be that the nearly 50% higher power usage may explain how they are getting 720mhs at 1300W vs 500mhs as 900w.
I wouldnt recommend asics like this to anyone.
|
|
|
ebay and if they dont move ewaste.
|
|
|
Don't stress yourself, you can still mine Ethereum Classic with those cards, ETC team have find a way to support low end graphics card on its modified daggerhashimoto algorithm, it's now called ETChash, it supports from 3gb gpu memory and it's quite profitable
i've been reading that, but most of softwares still don't support old cards. 600 series are not supported. and as you say , any old gfx could work if support is enabled, there are plenty of old cheap cards whit 2-3gb ram, stacking bunch at low electricity billl is a good entry level . Ethminer has cuda 8 support, but what old cards have 3 or 4 gb and only cuda 8? And why so aggressive? I think you are newbie, because those old cards need to much electricity, but maybe you can convince me otherwise. Hash power is hash power!! lol. no need to convince anyone . miners will know! woop woppp! This is true as long as power cost is affordable....but it must be worth the miner devs time ie...enough cards hashing to make it profitable for devs time they will not waste their time working on it. Every dev has to answer that for themselves.
|
|
|
I note that the 500mh unit on innosilicon shows 920w .. so maybe at 1300W consumption it can OC to 720mhs.
The miners.eu seems to be legit company ... ill do more checking but isnt just faceless / no address. company. Now that can be faked but it doesnt appear to be at first glance. So i wonder if they are just setting them to higher power usage like has been done with Antminer asics with both new FW and tunings. But yeah you would think innosilicon would be showing it if it is real.
Mystery deepens.
|
|
|
After 5.1c I have alot of incorrect ETH share on all video cards for a very short period. Lets say half of them. Definitely Phoenix Miner has some problem either with the drivers or itself. Video cards: Gigabyte - RX 580 8G BIOS: Default Polaris Bios Editor set Driver info: robinh00d_package_dag_fix OpenCL driver version: 17.31.0 Driver data: 27.7.2017 Driver Version: 22.19.659.1 Operating system: Windows 7 Version 6.1.7601
I know that it is weird to mine with Win7 but rly dont understand why no one supporting mining drivers and you have to use Win 10 which is such clumsy, full with spy, MS telemetry and bunch of other garbage applications, random restarts and pointless updates. In fact Win7 is flying on new machines.
You do know that win 7 is fully deprecated and not supported even by MS since Jan 4 2020? I think you do not understand the conception behind Windows 10; why is made, when you need that "update", what you need and why you need. Please do not post noob replies about that post. Only technical resolves or analyses - if you have such. Thank you. Thanks for pointing out my noob answer. Im well aware of what win10 is. I did not advise anything except point out that the os you are using is deprecated by MS about a year ago which does have an effect on the situation. My linux rigs, all 30 are running just fine without a single issue. Best of luck getting it solved.
|
|
|
I have purchased some Innosilicon A10 Pro+ 6G 500 Mhz and I wonder which is the best pool for mining Ethereum with those? Also does anybody knows if you can connect those miners on Nicehash?
As far I have tested Antpool and Ethermine. Antpool has a better higher hash rate that accepts of the miners but has a more declined shares. Ethermine is the opposite. It accepts less hashing rate than Antpool but has higher percent acceptance of shares. I will try to post every week the results of each pool with statistics and photos.
500mhs you mean? I thought that was a 720mhs unit not 500mhs. Or is this a lower power mode? Thanks for posting and offering to share the info.
|
|
|
And with that epoch change, a flood of users are dumped from Claymore into lolminer. And a series of "I used to over there", so "how do I over here?"
Unfortunately, I'm in this boat as well. It took a little while to tweak my AMD RX570's with Claymore and I was getting approx. 32-34. I am happily surprised that out of the box, lolminer starts up and I'm getting 21.5. But, like many others, I'd like to get it back to where I was.
So from what I'm gathering in the past few pages.
- we don't have the timing features we did in Claymore. So clock speeds and rxboost don't exist. But there seemed a little chatter that a new version could include this? - settings for fanmin (90) and fanmax (100) also don't seem to exist? - no need for strap?
I have AMD Afterburner installed still. Should I retry this? I know it was a little crazy doing trial and error originally. (blew a few breakers). But is it worth to go back to this and set the clock, fan and power settings the same in this app as I did in Claymore?
JGONZI - "you mentioned if you don't know how ask" but the idea of modding the BIOS does scare me. Not sure I want to do that just yet.
But the last thing to mention is; is lolminer reporting a smaller hash? I do notice on my miner (running Win10 + lolminer 1.16) indicates approx 21.6mh/s. But then I go over to ethminer.org and it's reporting 27.4mh/s
And it looks like I can update my video drivers from 20.4.1 to 20.11.3.
[Update] Can't say that Afterburner did anything. In fact out of two rigs; one is now at 21 and the other says 19? I set Afterburner (based off my Claymore settings of the same); PowerLimit = -10 Temp Limit = 90 CoreClock = 1200 MemClock = 2150 Fan Speed = 90 No real change is seen. It still seems to stay consistent. Even after rebooting one of them.
This thread is how to get the benefit of the modded bios without modding the bios...its dynamic straps applied to a running gpu. Eliovp is legend! https://bitcointalk.org/index.php?topic=5123724.0
|
|
|
After 5.1c I have alot of incorrect ETH share on all video cards for a very short period. Lets say half of them. Definitely Phoenix Miner has some problem either with the drivers or itself. Video cards: Gigabyte - RX 580 8G BIOS: Default Polaris Bios Editor set Driver info: robinh00d_package_dag_fix OpenCL driver version: 17.31.0 Driver data: 27.7.2017 Driver Version: 22.19.659.1 Operating system: Windows 7 Version 6.1.7601
I know that it is weird to mine with Win7 but rly dont understand why no one supporting mining drivers and you have to use Win 10 which is such clumsy, full with spy, MS telemetry and bunch of other garbage applications, random restarts and pointless updates. In fact Win7 is flying on new machines.
You do know that win 7 is fully deprecated and not supported even by MS since Jan 4 2020?
|
|
|
|