Ive got 570s using the One-Click bios mod and these settings:

Cor 1145
mem 2100
vlt 851
dpm 5


Each gets 31mhs
Mix of Micron and Samsung memory 3 of each...total 185.7 mhs
On Phoenix 5.1c linux (ethos)

Ive used SRBpolaris editor.  But there are editors some free some pay.

Try here

https://www.igorslab.de/en/red-bios-editor-and-morepowertool-adjust-and-optimize-your-vbios-and-even-more-stable-overclocking-navi-unlimited/3/

I have H110s running 13 Nvidia all same 10 series cards no issue.  Have a h110 running 11 570s and 1 560 no issue did have 12 570s but had a psu go bad and new one was short plugs so had to reduce.  The 560 is just cause 14mhs is 14mhs.   Maybe check bios..mine is H110 Pro BTC P1.10 ...

Im remote until morning i can get more specific info then if needed. (look at actual bios)....but ive got several rigs running 13 cards.....so not sure maybe something to do specific to the newer card?

I will note the rigs have i5-7400 cpus in them,...but i have an old 1050ti rig of 13 that is running a G4400 pentium just fine (50% load on cpu)...if that info helps....wierd.

And i have had 2 h110 show up doa....but they didnt work at all and got exchanged. Yours is working but not when over the #....

All my 4gb cards are running just fine still hitting around 30+mhs
simple 1 click mod  OC / UV pretty standard fair.

I am running 5.1c linux (ethos) and 5.2e on mmpos no issues

rx 580 should be getting more 30mhs.  Something is off....either the modded bios, oc/uv but something is not as it should be.

Yeah i only have a single windows rig...it is used to test and at one point was my bios moding station.  Updates from Redmond can do horrible things.  If you can post up the bat file here...maybe its something simple.

Also if you are using the config.txt post that up.

My bat fileis just
cd /mine/phoenix/
start_miner.bat

i have the setx lines only in the start_miner batch file...and then in config.txt have the -pool / -wal / -proto 3 (cuase nvidia is in it right now) but will run without a -proto arguments

But it is running phoenix 5.2 no issue win 10.

Whats causing you trouble?  Ive had no real problems have had to move a few off
claymore due to not all cards firing.  Loaded up Phoenix (5.1c) works fine with my rx5xx cards andven my vegas(will be moving those to a new rig with 5700xts)....just curios. because ive not had any issues with the drivers. 

Just curious.  My plan is to keep ethos going as long as i can....its been a real workhorse.   And its all paid for.

Nope has to do with your rig and setup only.
Get newest versions and understand windows systems are struggling with 4gb cards.

The mods also need to kill the halvmining scam selling of asics. 

Their documents from SoS of Oregon are forged and clearly incorrect date vs SoS...also SoS site has never had a halvmining anything.

Scammers gonna scam...and not even very well.

Ive got a gigabyte 5700XT getting 55Mhs from it on mmpos...and am installing a new Sapphire 5700XT Nitro+ in about 30 seconds...will post up what it does.

I havent modded the bios yet or really done much tuning.....but really happy with the performance/cost plus you can actually buy these right now....


Ok all done for now....both doing 55mhs so i got a lot of tuning to do but that is good enough from now.

81Mhs but it shows 2 gpus (0 and 1) so is it only 40mhs each....

Somebody got more info on what is going on there?

Ok..i see it is treating it (the miner sft) as two separate gpus with 8gb each....makes more sense

Just tested this on a mixed card rig 4/8 gb.

Seems 5.1c is the latest version of Phoenix miner linked to Ethos.  Good news is it works great!

I assume you are using Miner-Manager to side load for ethos.

If so then do:

miner-manager phoenixminer update

or

miner-manager phoenixminer install

This should install the 5.2e (i havent needed it yet but am on 5.0/5.1

This should fix the issue.  There was some bug with 8gb cards that 5.2 fixes after a specific dag.

LMK (and get to diggin)

Who would mine on the middle pool.  Says FEE rate is 90.0% when other two are 3% and 5%.....

Also what is the value of this coin?  I cannot find a value for it anywhere,

4gb cards?

Windows?

What version of Phoenix miner you running?

Ive got several ethos rigs running 5.0e and 5.1c with 4gb and 8gb cards no issue. 

Also have Claymore, Gminer, TeamRedMiner all running.  Keep seeing problems posted up but suspect most of that is windows.

Lmk ill try to help.

In under a week 4gb cards will be able to mine ETC due to DAG reduction. 

He answered this about 10 posts up......


“    The 5.2e does not support etchash but we will release a new version (5.3) in a week or so with ETCHash support. The idea is to have a version to go back to with the old ETC algo in case the hard fork fails (unlikely but still).  “

Dang windows..always breaking stuff.  Glad its fixed.

Try clicking (executing) it from an explorer window.  See if it does anything or same error.  Probably a typo somewhere in the bat/command line.