1) Is there any way to set alternative pool/wallet/miner in case main is not working properly, e.g. all pools for this coin are down (hello LUX), miner constantly crashes for some reason, etc? Some kind of wallet+miner+oc profile for emergency case, which should always work without problems?
I'm guess we talking about ccminer ccminer supports for failover (backup) pool servers. If click on Info icon near Pool URL then you will see tooltip "For failover pools just write them on the next line, pass is used one for all. " 2) Is there any way to group Rigs and change wallets/miners for them simultaneously?
Yes, you can apply any command to rig or group of rigs. Rigs can be grouped via Tags system and then you can easy select rigs via Tag and apply any command to them (incl. change wallet, miner, reboot etc). It's can be done using Rigs menu. You or (someone else) can create custom miner. Guide how to do this - https://forum.hiveos.farm/t/custom-miner-integration/4521/29Personally for me more prefer t-rex which already present at HiveOS 1) I specially mentioned situation when failover pool doesn't work. For example when Luxcoin was down for several days on all pools or another possible variant is newly updated miner that crashes for some reason after several minutes of mining. It's better have solution for worst scenario, isn't it? Several defined "Emergency wallet+miner+low oc profile" can solve that. 2) Thanks. 3) For the moment CD has fastest phi2 algo. 7200+ on 1080ti vs 6800 on enemy or 6300 on t-rex. Also other algos are good in some cases.
|
|
|
Somebody with test results of Lyra2z with GTX1080?
t-rex is the fastest for nvidia in lyra2z ~3400 on 1080.
|
|
|
1) Is there any way to set alternative pool/wallet/miner in case main is not working properly, e.g. all pools for this coin are down (hello LUX), miner constantly crashes for some reason, etc? Some kind of wallet+miner+oc profile for emergency case, which should always work without problems? 2) Is there any way to group Rigs and change wallets/miners for them simultaneously? 3) Cryptodredge for Linux is now available. https://bitcointalk.org/index.php?topic=4129696.0How to make it work in Hive?
|
|
|
ХЗ что за фигня. Щас глянул - та что 1400 выдавала скинулась до 1000. Перезапуск помог. Но та что 1000 выдавала и никак не хотела больше теперь 1400 тянет. Поставил 512 Intensity на всякий случай - может не будет скидываться. Но 970-я на 1024 пашет как часы сутками
Есть два момента. Первый - если дрова где-то умерли и скинулись, то может разгон отвалился, а тем временем майнер перезапустился(из батника, если с него запускал). Другой - время от времени просадку по хешрейту словить можно, но всё возвращается на круги своя после new job. Связано с тем, что на некотором отрезке джобы у NVIDIA начинаются траблы с вычислениями и я переключаюсь в более безопасный вариант kernel'а, который продолжает считать верно, но медленней(в ccminer в этом случаи шли ошибки). В будущем хочу разобраться детальней и исключить просадку вовсе. Слет дров и разгона не мой вариант. У меня самописный батник рулит всем этим процессом (вентиляторы,PL, целевой температурой и т.д. который периодически устанавливает все как надо и если упало, то рестартит) Когда хешрейт внизу - ничего не слетело и все работает как надо. Я даже проверил - запустил другой майнер - в нем все как положено. Запускаю твой и все равно 1000 вместо 1400. Помогла только перезагрузка.
|
|
|
ХЗ что за фигня. Щас глянул - та что 1400 выдавала скинулась до 1000. Перезапуск помог. Но та что 1000 выдавала и никак не хотела больше теперь 1400 тянет. Поставил 512 Intensity на всякий случай - может не будет скидываться. Но 970-я на 1024 пашет как часы сутками
|
|
|
I have 2 identical rigs with 1060/6. Run the same bat, but get ~1400h/s per GPU on one of them and only ~1000h/s on another.
Are you sure that overclocking settings are the same and MSI Afterburner(or what do you use) applied them? Also which one manufacturer of memory on cards in GPU-Z, and what bandwidth there, is it equal? Конечно уверен. Они вообще идентичны полностью, т.е. одинаково все железо, разгон. И сами они когда то были склонированы. И сейчас одинаковая версия винды, дров и т.д. на других майнерах они идентичны. Но тут еще такой момент у меня контрольная 970 на 15 версии вообще отказалась работать. На 17 опять заработала выдавая все теже 1720хешей. Но пока я пытался запустить 15ю 7ая версия начала выдавать 1400. Крутил туда сюда настройки и вдруг опять стало 1720. Хотя по сути разница в 1024х0 или 60х256 или любая другая комбинация влияет минимально (1680-1720). Все это было без перезагрузок, т.е. я вообще не понял от чего вдруг стало так. Это похоже на падение хешрейта у вег или cryptodredge этим же грешит на phi2. Когда 1080ти вдруг с 7200 сваливается на 6800 а то и 6200 и лечится только перезагрузкой.
|
|
|
What is the difference between this and nemosminer?
|
|
|
I have 2 identical rigs with 1060/6. Run the same bat, but get ~1400h/s per GPU on one of them and only ~1000h/s on another.
|
|
|
Does voltage settings really work for tdxminer on Hive?
Miner reports 340-350Watt for 1 RX 470 and 3 RX 570 but wallmeter says 550-560Watts in total.
System is z270 mobo and G4400 cpu and 4gb ram.
Does hive only report GPU core watt consumption without paying attention other components onboard such as video ram and etc?
I set 1299 Mhz for all gpu and 930-950mV with DPM 5 and make 12.6Mh/s from the rig.
Should I set DPM more lower such as 2-3?
Thanks.
Always calc as this (GPUs + MB/CPU/RAM/SSD/Risers etc. ~100w)+20%(at least) example in your case: (350W+100W)+20%PSU and other losses = 540W from the wall.
|
|
|
Хорошая работа! Тестирую майнер. АМД - скорости примерно те же, что и на старом. Нвидия - отлично. Скорости те же, но НАМНОГО реджектов меньше. Так же если поднять интенсивнотсь до 1024 скорость растет примерно на 3%, но вскоре скорость падает до 0 (NVIDIA). При интенсивности 256 работает стабильно. Пробовал менять воркзайс - эффекта нет. 32/64/256... Автор, расскажи плиз подробнее. Из предыдущего поста я понял, что нужно добиться минимальной интенсивности, при которой хешрейт не падает? А что с воркзайс?
Наиболее оптимальные настройки для 1060: PL 50, CC -400, Mem = MAX. 1060 3гб/6gb при 50/-400/+850 = 1400+ Для 1070 - поверлимит зависит от моели. Карта мощнее, поэтому PL = 50-55. CC = -400+150 (от модели). Mem = MAX. 1070 8Гб при PL 52/+150/+850 = 1920.
It's strange but GTX970 runs faster than 1060 = 1730+. But 1080Ti is real upset - only ~2300
|
|
|
I have old wallet file. I can't start old app - it closes without any errors. How can i get coins from it in new wallet?
|
|
|
30 june have passed. Gui v0.2.0 is stuck on 3xxxxxx block. Where is normal wallet without this msys2 and other strange stuff?
|
|
|
Isn't it easier to make conversion work that way: Just to download new "bitcore-qt.exe", start it and it will make everything required?
|
|
|
The site is unaccessible (it is accessible through webproxy services but can't get further than main page). Any other way to claim?
|
|
|
Are you sure? And how many people use these DEX? To begin with, traders should want to use these things. And only then can we talk about the boycott of centralized exchanges by developers.
Can you give a bit more detailed explanations why you would prefer centralized exchanges rather than decentralized ones, please. Here are some reasons. 1) Higher volume and better liquidity. 2) Can purchase with fiat 3) Don't have to run a hot wallet. 4) Password recovery options available. 5) 2FA available 1) It's only a matter of time. A year ago most people haven't even heard about DEX's. Now CB is small compared to centralized but is growing rapidly. 2) Most centralized also have no fiat at all, so what? 3) In case of CB you don't have to also. For example I don't sell for fiat on exchanges - localbitcoins provide a better option. 4) Passwords are also available and waiting for hackers, and you can't prevent it in any way. In DEX it's only up to you how to protect your assets. 5) The same as in 4. I'd better have additional trezor/ledger authorization.
|
|
|
somewhere it was said that we would have to claim (after mainnet launch) until the 20th of june. tomorrow is the 20th. now does that mean we cannot claim anymore after the mainnet launches some day? can we still claim after the mainnet launches (some day) and how long will be the next claiming period if so? is there already a new claiming deadline?
You will be able to claim in a few days. When claiming starts you will hav ONE week to claim cheers! Don't you think that ONE week is too small period as far as it has no definite start date? Just say now - from 1 July till 7 July, or whatever other clear date BEFOREHAND. Not small, 1 week is more that enough, most people will do it the first day - it takes no more than 5 minutes So you think people has nothing more to do than to check each day, whether they can claim or not? 1 week is very very small and unfair. Especially because you were not able to make things in exact and declared time. Even 2 months period some other coins had wasn't enough and people came much later and asked about swap.
|
|
|
somewhere it was said that we would have to claim (after mainnet launch) until the 20th of june. tomorrow is the 20th. now does that mean we cannot claim anymore after the mainnet launches some day? can we still claim after the mainnet launches (some day) and how long will be the next claiming period if so? is there already a new claiming deadline?
You will be able to claim in a few days. When claiming starts you will hav ONE week to claim cheers! Don't you think that ONE week is too small period as far as it has no definite start date? Just say now - from 1 July till 7 July, or whatever other clear date BEFOREHAND.
|
|
|
Dev. What will happen with coins remained unclaimed from swap?
The coins stolen from Crepcoin Exchange can be recovered if you have the screenshot of the withdrawal, as requested several times between March and April. I'm not asking about that. I'm asking about premined coins for swap. What will you do with those that noone will claim. I mean this: ◆ PREMINE SWAP FROM PNKS TO PSTAR: 8,000,000.00 PSTAR (8 Millions)
|
|
|
Dev. What will happen with coins remained unclaimed from swap?
|
|
|
|