Check your router to find their IPs. The fan on them won't spin until needed if I remember correctly.
|
|
|
I don't get it? I assuming by flush you mean flash. You're saying to remove the sd card and power the S4 without it in? How would we log back into it and flash it without the sd card?
Flush, definitely = Flash ![Wink](https://bitcointalk.org/Smileys/default/wink.gif) I would assume the "bug" lies somewhere in naming, or whatever the case. Removing the SD card probably tricks it somehow. Not 100% clear if you would remove the card and attempt to flash without it, or insert it later with the power on, or boot without it & then boot again with it to flash, or what the deal is exactly... but I am sure with minimal fiddling it is probably pretty self-explanatory. At least we have a hint ![Tongue](https://bitcointalk.org/Smileys/default/tongue.gif) Regardless, the "fixed" firmware is currently being worked on, and will be uploaded "soon". That is what I am waiting for. Much simpler that way. Not having to wait until October 9th, is great news! Great news indeed! I switched the files, and have the updated cgminer running. Problem is, now btcguild is reporting 1.6TH/s instead of the 2.1TH/s I was getting before switching the files. Guess I'm going to switch them back, and this time the screws are staying off for a while LOL.
|
|
|
Updated Firmware (Bug Fixed Version) is in the process of being tested and soon to be uploaded at http://www.bitmaintech.comMeanwhile.... If you need to update or flush the S4 firmware, and received this error message System Upgrade Failed cp: omitting directory 'SD'
Please turn off the S4. Please open the top cover and remove the microSD card inserted into the Beagle Bone Black unit ![](https://ip.bitcointalk.org/?u=http%3A%2F%2Fs1.postimg.org%2Fd9kur3yfj%2FS4_bbb_micro_SD.jpg&t=663&c=cC4p89kc-ZfmNw) Power it back on and log into the web control panel then try to flush with the new firmware. I don't get it? I assuming by flush you mean flash. You're saying to remove the sd card and power the S4 without it in? How would we log back into it and flash it without the sd card?
|
|
|
I've managed to install the update by taking out the sd card from the antminer s4 and replacing the 'initramfs.bin.SD' with the new firmware's version of 'initramfs.bin.SD'.
It still has the same issue of not mining what it says its mining.. :l
I wonder if that updates everything that needs to be updated. Might try later if I go back out to my garage. This method of updating the firmware was recommended by bitmain when i had an issue with the s2 ![](https://ip.bitcointalk.org/?u=http%3A%2F%2Fi46.photobucket.com%2Falbums%2Ff123%2FYun_Artist%2Fsdcard_zps2988996b.png&t=663&c=ZkKesJOGvl4EJA) and I take back what i said about it not making a difference, I'm mining on eligius and ive left it on for about 10 mins, its starting to see a difference of about 1600 gh/s now, whereas the antminer is saying its on around 1950gh/s / 2th/s Cool, thanks for posting the info. I'm going to go swap the file and report back.
|
|
|
I've managed to install the update by taking out the sd card from the antminer s4 and replacing the 'initramfs.bin.SD' with the new firmware's version of 'initramfs.bin.SD'.
It still has the same issue of not mining what it says its mining.. :l
I wonder if that updates everything that needs to be updated. Might try later if I go back out to my garage. Edit: Your load average is much lower than mine, I'm guessing it hadn't started hashing since it's showing an uptime of 0 minutes.
|
|
|
Same here. Cost me 20 minutes of downtime as I pulled the SD out of the S4 to make a backup image of the original firmware in case of problems with the new firmware.
|
|
|
The thing is obviously shipping, poodle. Mine will be here Monday unfortunately.
|
|
|
Firmware won't flash, any specific instructions?
Yes. What I said. Set your difficulty manually to 2048 on whatever pool you are mining at. This will avoid a portion of the ill effects of the current firmware. Aside from that, wait for Bitmain to get their sh*t together and support their products properly. This is very disappointing. The S4 should not have been shipped with this firmware. Providing a firmware package days after release which will not properly flash only adds insult to injury. I can't imagine how much BTC is currently being lost by inefficient and improperly configured miners, helping to further kill any chances of ROI for many many people. Nevermind the security risks involved with running the outdated 3.12.0 version of CGminer forever. Yep, been running at 2048 since I got it. Only way to get good results out of it, can't trust vardiff which works 1 out of 5 times. I'd like to get this firmware flashed, though.
|
|
|
Firmware won't flash, any specific instructions?
Unzip and rename to initramfs.bin.SD-20141003.tar That didn't work either. Inside the downloaded file is SD.tar which I extracted and renamed from SD.tar to initramfs.bin.SD-20141003.tar. Got the following error: "tar: invalid magic tar: short read cp: can't stat '*': No such file or directory "
|
|
|
Firmware won't flash, any specific instructions?
|
|
|
Does anyone know what username and password could I use for SSH access to S4? The device is freezed but SSH is live. Thx.
ssh username is root, and the password for the S4 is "admin" I've been ssh'ed into mine. Contemplating upgrading cgminer myself... Dare I? The author posted an ant miner-patched version and instructions (well, for the S3 I think)... I suck at Linux, but I'd like to ssh into a few of my miners to see what's going on behind the curtains. How would I go about seeing cgminer once I'm connected? Edit: Gave screen -r a try and that worked. Any other tricks I should know? Tried the same on an Innosilicon A2 Terminator, but it isn't the right command. send me btc and i will tell you..... Address? 1QAHVyRzkmD4j1pU5W89htZ3c6D6E7iWDs Look and see how many "donations" i got. Too bad you didn't post your actual address, I would have liked to send you a donation to help you move out of your step-mom's basement. Ah well, your loss.
|
|
|
Does anyone know what username and password could I use for SSH access to S4? The device is freezed but SSH is live. Thx.
ssh username is root, and the password for the S4 is "admin" I've been ssh'ed into mine. Contemplating upgrading cgminer myself... Dare I? The author posted an ant miner-patched version and instructions (well, for the S3 I think)... I suck at Linux, but I'd like to ssh into a few of my miners to see what's going on behind the curtains. How would I go about seeing cgminer once I'm connected? Edit: Gave screen -r a try and that worked. Any other tricks I should know? Tried the same on an Innosilicon A2 Terminator, but it isn't the right command. send me btc and i will tell you..... Address?
|
|
|
Does anyone know what username and password could I use for SSH access to S4? The device is freezed but SSH is live. Thx.
ssh username is root, and the password for the S4 is "admin" I've been ssh'ed into mine. Contemplating upgrading cgminer myself... Dare I? The author posted an ant miner-patched version and instructions (well, for the S3 I think)... I suck at Linux, but I'd like to ssh into a few of my miners to see what's going on behind the curtains. How would I go about seeing cgminer once I'm connected? Edit: Gave screen -r a try and that worked. Any other tricks I should know? Tried the same on an Innosilicon A2 Terminator, but it isn't the right command.
|
|
|
interested in DPS-2000bb power boards. what the price is?
Ditto.
|
|
|
If you believe the item was defective, you can return the miner to the following address immediately without obtaining the prior authorization, however, if the device is not under warranty or turned out to be a mis-diagnosed unit, there will be a return shipping fee and diagnostic fee be billed to you before the package be send out... Bitmain Warranty 3700 Quebec Street #100239 Denver, Colorado 80207 USA Telephone: +1-844-248-6246 Average Turn Around Time for non-preauthorized RMA, be 2-3 business days before it is send out. Required printed Bitmaintech.com order confirmation page and brief description of what is wrong with the unit. (Please make sure to include a phone number and e-mail address, so one of the techs can reach you if they have questions) * WARRANTY IS EXCHANGE TO A FUNCTIONING ITEM ONLY. THERE WILL BE NO REFUND.Bitmain - Every hour we're down we're losing money. What is your ETA on getting us the new firmware???
Based on their previous record - about 7+ weeks........ Is that before or after the the 2 months of sending screenshots to convince them there is an issue? Would you happen to have access to a beta of the upcoming firmware?
|
|
|
Well, I'd rather have a buggy unit ASAP as opposed to having them test them and drive the difficulty up in the process before I get my miners. To be honest when it works it works very well. Happy to have it so quickly after ordering.
Well, I'm happy you're happy ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) Myself, for that price, I'd prefer not to be treated like a guinea pig beta tester on a miner that might work on certain pools if I'm lucky while hoping my hash power is going where it's supposed to go...... ![Wink](https://bitcointalk.org/Smileys/default/wink.gif) Hindsight and all that jazz. Here's hoping by the time/if you decide to buy one you'll get a bug free miner. What? no dumb fck. lots of ppl here already warned you. But you're too stupid to see.... dont call it hindsight, retard. If you're too dumb to understand what we're talking about, you should refrain from posting.
|
|
|
I didn't bother reading your whole post, but if you're living in the US you don't get 120v to your house you get 240V across 2 120v phases.
100A = 24000w 150A = 36000w 200A = 48000w
You obviously need to leave headroom, plus remove 20% for continuous load.
You could have doubled your output if you had wired your rigs to use 240v instead of 120v.
|
|
|
Monday delivery for me too.
Anyone know what I should expect to pay at the door for this thing in Canada?
$1698.78 ![Sad](https://bitcointalk.org/Smileys/default/sad.gif) Mother fucker....
|
|
|
I suppose if someone infected coughed on a bill, handed it to you, and you rolled it up to snort some blow... Maybe.
|
|
|
Monday delivery for me too.
Anyone know what I should expect to pay at the door for this thing in Canada?
|
|
|
|