"We are short of the Bitcoin (BTC) currency. Please select another one for payments until we find more blocks."
I thought that was impossible with BTC, as they come from exchange, not mining...
Sounds like the current problems with Cryptsy (you can sell the mined coins but don't get your BTC out) Yup no doubt, I stripped Cryptsy out of both my pools, but I did that at the end of Nov thankfully.
|
|
|
crackfoo.... im not complaining... but this "spike" cant be from the amount of mining hardware I have... or luck... its too out of place.... See screenshot. I took it at roughly 17:00PST 9MBTC is quite a bit in that short time period. Any thoughts? It looks like it was from CREVA, just hit some high prices with what was mined.
|
|
|
We've disabled the halving of payments for now, perhaps that will at least make the payments for non-BTC coins stable
Thanks. So far I have mined NOTE, VIA, PTC, DGB, DGC, MZC, MYR and DASH. Only had the transaction halving issue on NOTE and VIA. Big pending balance on PTC whilst the pool mines enough of it to pay. The delayed payment (transactions without txId) might be occurring whilst the system is waiting for transactions to confirm (had that quite a lot attempting to mine DASH). Had a small 0.45 DGB transaction that didn't get a txId when other payments where going through. Not sure what happened to that. It seems that mining coins that are regularly mined across multiple algos' works quite well on the whole. Then I can send them to exchange for another coin without incurring high BTC transaction charges. I hope you manage to get to the bottom of the issue, I find mining DGB payments is good coin for sending to exchanges quickly. In the meantime, the system seems to be indicating that I am around 4 NOTE and 10 VIA down. Can you PM the address's you want NOTE and VIA sent to? Also... have you been mining non BTC coins still? Has it been paying out as you'd expect now? Thanks
|
|
|
We've just added MindCoin (MND) and Bantam (BNT) to the x11 port.
Cheers!
|
|
|
TAKcoin seems to have been taken off coinwarz It was only on Cryptsy and we all know what state they are in. Might be a good time to search out another exchange to get listed on.
|
|
|
Might be helpful to add a known issue, that join will not run more than one instance on a single machine... We currently mine J on www.zpool.ca on the x13 algo. Can you add it to the OP? Thanks!
|
|
|
Thank you for the explanation. That worked. Got a VIA payement, but it was halved and there has be no readjustment to for over 6 hours. Pool says 30.5 VIA payed, only 21 received. I hope crackfoo can resolve this issue soon. i think the pool calculated, you get 30.5 via, but the pool has only 21 spendable coins. you will receive the remainder coins after the pool got the imature coins. There definitely seems to be some issue with the block half payment re-credit system. Last payment was for around 11 VIA, halved to 5.5 VIA. VIA account is now flat and other 5 VIA blocks have now been confirmed. We've disabled the halving of payments for now, perhaps that will at least make the payments for non-BTC coins stable.
|
|
|
$ limecoinx-cli listaccounts { "" : 0.00000000, "0" : 5020.49782200 } ~/.limecoinx$ limecoinx-cli sendfrom 0 iF7dAGNmy8HkESMoPTA3GoZt2K3f4qMFQq 5000 error: {"code":-4,"message":"Insufficient funds."} ~/.limecoinx$ Any idea how I can move my coins to another wallet?
|
|
|
Followed those instructions... but I get: { "overall" : "Successfully started 0 masternodes, failed to start 1, total 1", "detail" : { "status" : { "alias" : "MN01", "result" : "failed", "errorMessage" : "could not allocate vin" } } } debug shows: 2016-01-05 14:55:14 CActiveMasternode::GetMasterNodeVin - Could not locate valid vin 2016-01-05 14:55:14 CActiveMasternode::Register() - Error: could not allocate vin This message say, he can not find the wallet with the coin. You need for every wallet a separate folder and local ip. But all I did was move the the masternode config from the limecoinx.conf into the masternode.conf. The wallet is the same one....
|
|
|
crackfoo, ^^^^^ that is cool. thanks for posting
Forgot to mention that the listaddressgroupings command is to be run on the old v1 wallet and the other/import on the v2 wallet and the commands likely only work on a linux based machine. Ahmed helped with the first one as I couldn't seem to find any accounts that actually had my balances so that magic was his. That said.. I'm still missing nearly 4mil GRE.... :\ You definitely shouldn't be missing 4M GRE so we can try to help you find them. I've run through the script again and seemed to get almost all of my addresses... except for 80 or so. Now only missing 1.3M
|
|
|
Can anyone provide me active nodes (addnode) to CrevaCoin? Thanks!
Can give these a try: "addr" : "54.93.35.41:22440", "addr" : "211.110.139.240:22440", "addr" : "85.25.198.151:22440", "addr" : "178.33.223.187:22440",
|
|
|
And the fact they they are rarely even paying out BTC now. We've totally removed Cryptsy from everything we run because of the questionable state.
Good idea. What alternative with a broad variety of PoW altcoins and enough liquidity is available? We have a broad range at www.zpool.caCheers I mean what exchange you will use as an alternative to Cryptsy. Most exchanges either don't have the suitable coins listed or no volume. Bittrex and Poloniex, combined, cover most of the coins Cryptsy has. But there are a few that are only on Cryptsy. There are actually a decent number of coins on there I wouldn't mind mining again so hopefully another exchange picks them up. But we're happy to not have to deal with the BS of Cryptsy and we're still profitable.
|
|
|
crackfoo, ^^^^^ that is cool. thanks for posting
Forgot to mention that the listaddressgroupings command is to be run on the old v1 wallet and the other/import on the v2 wallet and the commands likely only work on a linux based machine. Ahmed helped with the first one as I couldn't seem to find any accounts that actually had my balances so that magic was his. That said.. I'm still missing nearly 4mil GRE.... :\
|
|
|
Instructions: Windows users. Open My Computer and in the address bar type %APPDATA% and hit enter Look for the folder called GreencoinV2 and delete every file except wallet.dat Now you can download run the new greencoinv2 client New Client Windows Link: https://www.dropbox.com/s/94bfex1or76ip19/greencoin.zip?dl=0To perform the swap over, click help, debug window and then console on the V1 QT client Do this for all of your greencoin v1 addresses: run the command: dumpprivkey <Your GRE V1 Address Here (Without the brackets)> You should get a response such as: RhGsLCi4ckTfv9zMtq1WFhDukw2Z1HBUebH8EzoyeFXLh5pCTqqJ Note all of these down On the GREv2 client click help, debug window and then console for each of the private keys from the V1 wallet run the command: importprivkey <private key> e.g. importprivkey RhGsLCi4ckTfv9zMtq1WFhDukw2Z1HBUebH8EzoyeFXLh5pCTqqJ The wallet will appear to hang for a few minutes as it re-scans the blockchain. Once completed you should see your coins in your wallet Ahmed Ahmed mentioned to me you can also run: greencoind -rescan -reindex and not have to dump the privkey to ASCII, if that's a concern I tried to do that with my v1 wallet and it crashed. I ended up dumping all the privkeys for all addresses and scripted the import of all of them as I had 3k+ Exported them to a file: ./greencoind listaddressgroupings | grep '"' | sed s/' "'//g | sed s/'",'//g | xargs -n1 -I{} -P16 ./greencoind dumpprivkey {} > privkeys.txt Then created the script: for i in `cat privkeys.txt`; do echo "./greencoind importprivkey $i \"\" false" >>greimport.sh; done then in the greimport.sh file, go to the last line and change the false to true... then run the script and all your private keys will be imported...
|
|
|
Can I have my pools added to the wiki? I can edit pages but I can't add new ones. www.zpool.cawww.xpool.caI can edit them after they're created... Also Triplemining is now defunt Thanks!
|
|
|
Followed those instructions... but I get: { "overall" : "Successfully started 0 masternodes, failed to start 1, total 1", "detail" : { "status" : { "alias" : "MN01", "result" : "failed", "errorMessage" : "could not allocate vin" } } } debug shows: 2016-01-05 14:55:14 CActiveMasternode::GetMasterNodeVin - Could not locate valid vin 2016-01-05 14:55:14 CActiveMasternode::Register() - Error: could not allocate vin
|
|
|
[ASK] guys... i have GTX 970 and mining with ccminer. which one from this two give better pay? suprnova or pool.mn? pool.mn had only 4 miners (5 with me) meanwhile suprnova already had a few. already try mining for 2 hours in suprnova and get about 20 coin, and i already put it in my wallet. so... more miner = more profit or... better with least miner? In the end... it will generally work out the same. with more miners, you'll get smaller payouts more often, while with less miners, you'll get bigger payouts but not as often... Feel free to test/compare by mining MND on www.zpool.caCheers thanks. i'm trying to get "found block" so i will get that 250 reward, in this case... less miner will get me better chance... correct? never get a block before... haha. curious curious.... Working in a pool... you only get your share of the block reward. It's only possible to get the full reward should you try and solo mine or you happen to be on a pool with no miners.
|
|
|
chrysophylax... you wanted to hear from me?
|
|
|
[ASK] guys... i have GTX 970 and mining with ccminer. which one from this two give better pay? suprnova or pool.mn? pool.mn had only 4 miners (5 with me) meanwhile suprnova already had a few. already try mining for 2 hours in suprnova and get about 20 coin, and i already put it in my wallet. so... more miner = more profit or... better with least miner? In the end... it will generally work out the same. with more miners, you'll get smaller payouts more often, while with less miners, you'll get bigger payouts but not as often... Feel free to test/compare by mining MND on www.zpool.caCheers
|
|
|
The color orange is not adequate IMO for a "dark" coin, should be rather blue or similar (blue-green?, blue-black?, blue-violet?), dark color anyway, orange is too "bright" (just my personal taste).
I think the colour is good. But I do enjoy fanta and orange crush so perhaps I'm biased. The logo looks like it already incorporates the B and D but just not so obvious. I don't believe BTCD is meant to attract and primarily be used in 'dark' markets or want to give the impression that it is all it can be used for. It's much much bigger than that.
|
|
|
|