My Balance is still zero after last payout, but Total Unpaid is increasing. Is it normal?
If coins have not matured... yes.
|
|
|
Hi, We've added DASH to the miners multipool: www.zpool.caMine any of our algo's and get paid in DASH. Cheers!
|
|
|
Hi, We'ed added XPD to the miners multipool: www.zpool.caCheers!
|
|
|
Hi,
After the next payout I'll be bumping the payout frequency to every 6 hours with a min payout of 0.005. Sunday's low payout will be adjusted to 0.00025
Cheers!
|
|
|
go to pool.mn
and maxminers,they have stratum also
zpool.ca and yiimp also have stratum.
|
|
|
Hello,
could somebody please advise how to set up sgminer for mining lyra2v2 on zpool? Which version of sgminer should be used, and with which parameters? Or probably not sgminer? I'm running Sapphire R9 390x and MSI R9 390X.
Tried a number of combinations, but each time it either submits only invalid shares or just doesn't work at all.
Thanks in advance
Whats your command line you are using to start your miners? Most problems are usually using the wrong lyra algo. For lyra2v2 I tried: a) sgminer 5.3.0. with these params: • sgminer.exe --no-submit-stale -k lyra2 --url=stratum+tcp://mine.zpool.ca:4533 -u [BTC_WALLET]:x -p c=BTC,lyra2 --keccak-unroll 0 --hamsi-expand-big 4 --nfactor 10 --xintensity 19 --thread-concurrency 19 --worksize 64 --gpu-threads 2 --> only invalid shares and max. hashrate 700-800 MH/s with MSI R9 390X (tried to change password params varously - all the same) • sgminer.exe -k lyra2 --url=stratum+tcp://mine.zpool.ca:4533 -u [BTC_WALLET]:x -p c=BTC,lyra2 --> freezes forever at "Initializing kernel lyra2re.cl with factor 10, n 1024 b) sgminer 5.1.0. with these params: • sgminer.exe --no-submit-stale -k lyra2v2 --url=stratum+tcp://mine.zpool.ca:4533 -u [BTC_WALLET]:x -p c=BTC,lyra2v2 --nfactor 10 --xintensity 1024 --thread-concurrency 8192 --worksize 128 --gpu-threads 2 --> only invalid shares and max. hashrate 700-800 MH/s with MSI R9 390X (tried to change password params varously - all the same) And lots of other combinations.... Where am I wrong? Looks like your not putting the algo in properly, lyra2 is definitely wrong but some miners are different for v2, try lyra2rev2? Now trying with these params at sgminer 5.3.0. sgminer.exe -k lyra2rev2 --url=stratum+tcp://mine.zpool.ca:4533 -u [BTC_WALLET]:x -p c=BTC,lyra2rev2 --keccak-unroll 0 --hamsi-expand-big 4 --nfactor 10 --xintensity 1024 --thread-concurrency 0 --worksize 64 --gpu-threads 1 Again freezes at Initializing kernel lyra2rev2.cl ... What sgminer version should I use? Or where else could be my mistake? Maybe try lyra2re2? Might want to try: https://github.com/tpruvot/sgminerI don't have GPU's so ever used anything but cpu miners.... Maybe someone else will chime in as to what they are using.
|
|
|
Hello,
could somebody please advise how to set up sgminer for mining lyra2v2 on zpool? Which version of sgminer should be used, and with which parameters? Or probably not sgminer? I'm running Sapphire R9 390x and MSI R9 390X.
Tried a number of combinations, but each time it either submits only invalid shares or just doesn't work at all.
Thanks in advance
Whats your command line you are using to start your miners? Most problems are usually using the wrong lyra algo. For lyra2v2 I tried: a) sgminer 5.3.0. with these params: • sgminer.exe --no-submit-stale -k lyra2 --url=stratum+tcp://mine.zpool.ca:4533 -u [BTC_WALLET]:x -p c=BTC,lyra2 --keccak-unroll 0 --hamsi-expand-big 4 --nfactor 10 --xintensity 19 --thread-concurrency 19 --worksize 64 --gpu-threads 2 --> only invalid shares and max. hashrate 700-800 MH/s with MSI R9 390X (tried to change password params varously - all the same) • sgminer.exe -k lyra2 --url=stratum+tcp://mine.zpool.ca:4533 -u [BTC_WALLET]:x -p c=BTC,lyra2 --> freezes forever at "Initializing kernel lyra2re.cl with factor 10, n 1024 b) sgminer 5.1.0. with these params: • sgminer.exe --no-submit-stale -k lyra2v2 --url=stratum+tcp://mine.zpool.ca:4533 -u [BTC_WALLET]:x -p c=BTC,lyra2v2 --nfactor 10 --xintensity 1024 --thread-concurrency 8192 --worksize 128 --gpu-threads 2 --> only invalid shares and max. hashrate 700-800 MH/s with MSI R9 390X (tried to change password params varously - all the same) And lots of other combinations.... Where am I wrong? Looks like your not putting the algo in properly, lyra2 is definitely wrong but some miners are different for v2, try lyra2rev2?
|
|
|
Hello,
could somebody please advise how to set up sgminer for mining lyra2v2 on zpool? Which version of sgminer should be used, and with which parameters? Or probably not sgminer? I'm running Sapphire R9 390x and MSI R9 390X.
Tried a number of combinations, but each time it either submits only invalid shares or just doesn't work at all.
Thanks in advance
Whats your command line you are using to start your miners? Most problems are usually using the wrong lyra algo.
|
|
|
Hi, We've added TKN to the miners mutipool: www.zpool.caCheers!
|
|
|
Hi, We've added POSEX to the miners multipool: www.zpool.caCheers!
|
|
|
Whats with the version: "version" : "v1.0.2.5-61404-POSOnly",
It has no PoW enabled..... This versions does not have PoW. What up?! Dude, check pages 53-55 .. POW ended... oh bleh. Thats what I get for being in jamaica. thnx rm -rf
|
|
|
Whats with the version: "version" : "v1.0.2.5-61404-POSOnly",
It has no PoW enabled..... This versions does not have PoW. What up?!
|
|
|
Whats with the version: "version" : "v1.0.2.5-61404-POSOnly",
It has no PoW enabled.....
|
|
|
Memetic Core 1.0.2.5 - Resolve fork and bump protocol version to block old wallets
MANDATORY UPDATE!!!!!!!!!!!!
Updating and resyncing now. Can you provide a current block + blockhash to verify the correct blockchain? I'm currently seeing block 71489, blockhash 296c6a153ed0eeb71c7175d37db21f53c3906470000edb0ec45beaae4c523a29 - just want to make sure that's correct. I get the same...
|
|
|
Whats with the version: "version" : "v1.0.2.5-61404-POSOnly",
|
|
|
A fork happened at block 71320 One chain reports 4298a1d06c0effb8a6f15205bb5e6d7c6ea3d6ef68a16a40ef9480c49a3cf212 and one reports 956045b105c712ec8d8f12aedfabbeec2d4cc3008fd5005122acbf2b19d4ad56 at block 71320 http://chain.blockpioneers.info/meme/search.phpWe'll be going with the 956045b105c712ec8d8f12aedfabbeec2d4cc3008fd5005122acbf2b19d4ad56 fork to match the block explorer. We're working with Bittrex to get things resolved and checking the codebase. No coins should be lost but you may need to re-sync after the update. which is the correct one?
|
|
|
Hi,
I have recently discovered that if I have CRW running on my sha port, it blocks UNO and MYR from generating blocks. As soon as I disabled CRW, they began creating blocks again...
Is there a known conflict with these coins? Is there some conflict with chainid's or something?
Some insight would be great,
Thanks!
|
|
|
something is off on the pool stats for DECRED.
When we seem to be generating a lot of blocks in good amounts of time (good luck);
On the page it shows decred profitability next to the coin itself on the left. Should be between 4.xxx and 5.xxx when it's 2.xxx
It seems to read lower the better the pool luck is..... am I the only one seeing this?
I think cause the diff jumped and the price dropped...
|
|
|
There we go. another pool Nice! Anyway we can get a direct link to that stratum pool ? I don't know the port number. Sweet Zpool is good. I've used them many times. stratum+tcp://mine.zpool.ca:3533
|
|
|
Just tried mining some DGB on a previously used DGB address. The wallet has now changed to UNO. c=DGB in password. Is this because the qubit wallet is not running?
EDIT: It initially said DGB-sha, whereas before it just said DGB.
Oh shoot, perhaps. Qubit now up again.
|
|
|
|