Can anyone show me the setting msi for Zcoin of 1080ti ? I had msi armor
I use 80 power, 90 core and 300 memory, is that ok?
no, because zcoin is not the most profitable coin to mine now |
|
|
|
|
verge-verge-verge!!! x17. PLEASE!!!
|
|
|
|
|
no, vega is bad for mining, no one owns it )))
|
|
|
|
I was curious if there were any plans to extend Verge to the other algorithms it could be mined on. It's rather profitable when mined on either x17 or Lyra2RE2.
x17 will be best but pool for this coin should be fine tuned to adapt extreme fast block times |
|
|
|
No benefit from 16gb memory of vega FE yet
Vega FE 2122H/s average running stable 1640 core @ .900v 1102 mem @.900v HBM temp currently 76C - been running approx 5 days 36299 shares 34 errors blockchain with overdriventool (I can get mem to 1107 but errors increase) I would post a pic but not sure how to upload on here? I have reduced power lower than 200W but still working out how to do it perfectly - I can only do this at weekends (read somwhere mem volts and core volts must match) definitely your downvolt doesn't working. There is no chance vega can work at 1640 gpu core with only 900mV And your power readings it is the second proof. You should have 160 watt with working 900mV downvolt |
|
|
|
bitcore it's better imho, it has big airdrop interest, and with your mod, it's on top of the profit
The best sp-mod today is the blake2s mod. (verge) The profit is more than $20 per 1080ti card.. x17 is much better )) but all pools suxx )) solo rules got $50/day per gtx1080ti you need big luck for solo with current nethash, unless you have a big farm... 1ghs x17 farm is ok for solo I think |
|
|
|
well, seems I missed it ... I'm still with old good alexis 20mhs per gtx1080ti
On the 1080ti, I get 20MHASH with 80% tdp and the blake2s sp-mod #2 does 7000MhASH Thats 350 times the speed of x17. live prices from zpool 1GHASH x17 0.074btc / Ghash 1GHASH blake2s(sp-mod) 0.00019677btc GHASH (So x17 has 376 times the payout of blake2s. Amost the same) with your big farm it is very stupid to mine on pool ... fast block time, heavy load and bad configuration produce a lot of orphans and missed blocks on pool. |
|
|
|
bitcore it's better imho, it has big airdrop interest, and with your mod, it's on top of the profit
The best sp-mod today is the blake2s mod. (verge) The profit is more than $20 per 1080ti card.. x17 is much better )) but all pools suxx )) solo rules got $50/day per gtx1080ti in order for sp_ not to waste time on an x17 mod: there are 20% improved x17 miners around already. well, seems I missed it ... I'm still with old good alexis 20mhs per gtx1080ti |
|
|
|
bitcore it's better imho, it has big airdrop interest, and with your mod, it's on top of the profit
The best sp-mod today is the blake2s mod. (verge) The profit is more than $20 per 1080ti card.. x17 is much better )) but all pools suxx )) solo rules got $50/day per gtx1080ti |
|
|
|
most profitable now are nist5, neoscrypt, x17, blake2s, lyra2v2 ... you have no good miners for them.
My farm is currently farming 4 more profitable algos than the ones you have listed with the sp-mod private kernels. you wanna sell them - then explain )) But I highly doubt ... you have more than $5/day now from gtx1060? |
|
|
|
The last 10% is the most profitable percent. Opensource miners move to other coins, and you get 10% more than the competition. Actually you get 30-40% more than the competition since most of the miners mine the big coins like ethereum and zcash. and the sp-mod bins are made for more profitable coins.
most profitable now are nist5, neoscrypt, x17, blake2s, lyra2v2 ... you have no good miners for them. |
|
|
|
|
well, seems like nobody takes my words about Verge seriously )) even now after diff rise it is 15usd/day per 1080ti ))
|
|
|
|
verge (x17) is very strong now. But better to mine solo if you have many 1080ti's. All pools including yiimp are tuned bad for verge ...
Anybody knows about any solo paying pool for Verge (blake2s). There is one at mining.securepayment.cc but it is only Scrypt, not good for GPU's. I set up on my own pc and missing a lot of Blocks..... 14 in last 3 hours.... Frustrated now. Can someone setup a faster one. This 30 sec blocktime is killing it. Latency too bad for me. read help me file for ccminer and set proper -s option for fast blocktime coin. |
|
|
|
How the hell are we going to be able to supply power to a rack of these, no PSU has enough PCIe power connectors to feed six of these cards!? It's getting ridiculous...  the only hope is that it will work with 2 power connectors instead of 3. |
|
|
|
|
damn, sp_ wrote about etn and mph, time to leave )))
|
|
|
|
|
verge (x17) is very strong now. But better to mine solo if you have many 1080ti's. All pools including yiimp are tuned bad for verge ...
|
|
|
|
how many btc per Mh/s are you guys getting on zcoin?
zcoin is not profitable comparing to other coins (nist5, keccak, lyrav2, neoscrypt, equihash based). Also it has problems with staled shares. Don't trust calculators, you'll get only half or less then expected. |
|
|
|
Anyone missed new lyra2v2 masternode shitcoin? )))
Which one? There seem to be about 10/day ore ... |
|
|
|
|
Anyone missed new lyra2v2 masternode shitcoin? )))
|
|
|
|
Hi
I'm running miningpoolhub.
One of miner asked that why cast xmr is not working on miningpoolhub.
I don't know why. Can you fix this issue?
Or do I have to tweak something? My pool already follows other stratum protocol smoothly.
Last time a tried cast-xmr it worked good with mph. But now I moved to sgminer so can't say about current situation. any adv sgminer? it is free and opensource. the same speed for vega64 and little bit slower than cast-xmr for vega56 |
|
|
|
|
Show Posts
