[ANN][POOL] Mining Pool Hub - Multipool. Multialgo, Auto Exchange to any coin.

[d0n4ald]

hello - i just downloaded multipool miner

have a 1050ti...i am thinking about buying another gpu. can i mix different gpu's with my 1050ti?  I have a mobo with 6 pci-e slots, so no doubt i can fit more cards. PSU is only 550 watts though, so i think it could probably handle another 1050ti. not sure if it could handle something like a 2x 1070s?

other questions - i only picked a few auto switching algos  - lyra2, neoscript,equihash, lyra2re2.  Should i add others? should i only stick to one?  every time i edit my list of algos - does that mean i have to run benchmarking all over again?

onto coins balances - i like the novelty of holding on to many coins that i will mine.  Is this not advised?  should i just stick to auto converting it to one coin, like litecoin?  will i have difficulty moving coins around to wallets since i probably wont have a big balance in each of them?

[IronMan_74]

I posted this on Reddit and I am going to post it here so hopefully someone can answer this for me:

I mined some Maxcoin by accident and disabled it a day later in Awesome Miner. It’s set to auto exchange and most of it did. However now I have 0.04 Maxcoin under Balances (it shows as being On Exchange). It’s been there for days (going on 3 days now) and hasn’t been converted yet. When I go under my Maxcoin wallet it shows 0.00000000 as in my wallet and on the exchange. Why does balances show one thing and the wallet show something else? How do I get rid of it? I either want it auto exchanged or I want to give it to someone so it will go away. It also keeps appearing and disappearing under balances randomly. Help?

Here is a picture of my Maxcoin wallet page and the balances page to show what I am referring to. Any help would be appreciated.
https://imgur.com/a/C2S57

maxcoin is only exchanged on Yobit, so depending on your autoexchange coin it may never get exchanged. i had the same thing happen when i started out, mined some maxcoin on accident before i turned that algo off and i have 11ish maxcoin sitting there waiting on auto exchange for 2 months now. it will never happen for me for the time being because i'm auto exchanging to vertcoin and since vertcoin isn't on yobit i won't get auto exchanged to it. i would have to switch my autoexchange to something else that MPH exchanges on yobit in order to get rid of the max coin.

[Christopher761]

@d0n4ald as to which coins to hold:  It's anybody's guess where each individual coin is going to go.  Some will sky rocket.  Some will dump.  Anyone that says they know for sure is lying.  Do what you feel is best.

But, having 20 different coins means that it is going to take 20x longer to get a payout to your wallet.  And it means you need 20x wallets.

Personally, I exchange everything to BTC, and then when I get a bunch, I send it to a wallet that I control.  Maybe not the right thing to do.  Bitcoin was at $20,000 a few days ago, and now down to $14,000.  Round and round she goes, where she goes, nobody knows.

[crypper]

A bit off-topic.
Just noticed nicehash appeared in WhatToMine again, and guess what - nicehash is ALIVE!
And guess what - there are plenty of idiots to trust them their funds again!
WOW!

[Temporel]

hello - i just downloaded multipool miner

have a 1050ti...i am thinking about buying another gpu. can i mix different gpu's with my 1050ti?  I have a mobo with 6 pci-e slots, so no doubt i can fit more cards. PSU is only 550 watts though, so i think it could probably handle another 1050ti. not sure if it could handle something like a 2x 1070s?

other questions - i only picked a few auto switching algos  - lyra2, neoscript,equihash, lyra2re2.  Should i add others? should i only stick to one?  every time i edit my list of algos - does that mean i have to run benchmarking all over again?

onto coins balances - i like the novelty of holding on to many coins that i will mine.  Is this not advised?  should i just stick to auto converting it to one coin, like litecoin?  will i have difficulty moving coins around to wallets since i probably wont have a big balance in each of them?

most nvidia required 500 W minimun PSU,

600 Watts for 2 x 1070 + Full PC is more than enough btw. Even 500 Watts would be fine for a PC mining 24/24

[PsychoShaft]

hey guys is anyone having issues with the https://litecoin.miningpoolhub.com/?

i been getting a hash rate of 20mh/s for the last 2 days how ever i am not  getting any unconfirmed or confirmed. i am using BFGminer and ASIC moonlander2 usb miners.

i am using these details:

HOST:   hub.miningpoolhub.com
PORT:   20460
Username:   weblogin.workername (replace weblogin to your actual login id)
Password:   worker password. (not important. pool doesn't check this)

Confirmed            0.00000000
Unconfirmed    0.00000000

Kind Regards

Paul

[malthrax]

hey guys is anyone having issues with the https://litecoin.miningpoolhub.com/?

i been getting a hash rate of 20mh/s for the last 2 days how ever i am not  getting any unconfirmed or confirmed. i am using BFGminer and ASIC moonlander2 usb miners.

i am using these details:

HOST:   hub.miningpoolhub.com
PORT:   20460
Username:   weblogin.workername (replace weblogin to your actual login id)
Password:   worker password. (not important. pool doesn't check this)

Confirmed            0.00000000
Unconfirmed    0.00000000

Kind Regards

Paul

Time Since Last Block   44 hours 12 minutes 41 seconds

[PsychoShaft]

would you recommend changing to another pool like https://www.litecoinpool.org/?

Regards

Paul

[d0n4ald]

hello - i just downloaded multipool miner

have a 1050ti...i am thinking about buying another gpu. can i mix different gpu's with my 1050ti?  I have a mobo with 6 pci-e slots, so no doubt i can fit more cards. PSU is only 550 watts though, so i think it could probably handle another 1050ti. not sure if it could handle something like a 2x 1070s?

other questions - i only picked a few auto switching algos  - lyra2, neoscript,equihash, lyra2re2.  Should i add others? should i only stick to one?  every time i edit my list of algos - does that mean i have to run benchmarking all over again?

onto coins balances - i like the novelty of holding on to many coins that i will mine.  Is this not advised?  should i just stick to auto converting it to one coin, like litecoin?  will i have difficulty moving coins around to wallets since i probably wont have a big balance in each of them?

most nvidia required 500 W minimun PSU, add another 1050 should be no problem since max power draw is around 75w, if you want to add 1070 also it will ok its max draw 150w, for me better add 1070 since it have better Hashrate and more efficient in power draw.

with multipoolminer you can set as much as algo available in MPH, it will switch automatically to most profitable coin to mine, benchmarking done every 24 hours, if you add some coin which never added before mpm will benchmark it for the first time.

Holding to many coin is good if you do long term hold, but if you want to cash it fast i advice you choose best coin as right now Ethereum is best.

is 1070 or 1070 ti better for mining MPH?

[fgarpe]

Hi!,
I has written my own bash script to mine the most profitable algorithm at each moment, to do that I get the response for an API call to https://miningpoolhub.com/index.php?page=api&action=getautoswitchingandprofitsstatisticsthen and then I start mining the algorithm with the highest  "normalized_profit_amd" value. All seems to be ok, but I see diferences between the result of the API call and the "Auto switching ports per algo. Sorted for AMD GPU" table from miningpoolhub web page. For example, with the API call I get ethash as the most profitable algorithm, but in the web page I see Cryptonight as the most profitable... ¿How can I get the most profitable algorithm using API calls?, ¿what is the most profitable algorithm, the algorithm returned in the API call or the algorithm or the one that appears on the web as the most profitable?

regards

[aaronsace]

would you recommend changing to another pool like https://www.litecoinpool.org/?

Regards

Paul

Zpool is the most profitable:
URL: scrypt.mine.zpool.ca:3433#xnsub
Worker: <BTC Wallet>
Password: c=BTC,d=128000

[malthrax]

would you recommend changing to another pool like https://www.litecoinpool.org/?

Regards

Paul

Zpool is the most profitable:
URL: scrypt.mine.zpool.ca:3433#xnsub
Worker: <BTC Wallet>
Password: c=BTC,d=128000

In terms of "bitcoin per watt", yes.. but if he's looking for LTC specifically, zpool isn't the place to go.  the scrypt pool there is mining digibyte & verge primarily.

[aaronsace]

would you recommend changing to another pool like https://www.litecoinpool.org/?

Regards

Paul

Zpool is the most profitable:
URL: scrypt.mine.zpool.ca:3433#xnsub
Worker: <BTC Wallet>
Password: c=BTC,d=128000

In terms of "bitcoin per watt", yes.. but if he's looking for LTC specifically, zpool isn't the place to go.  the scrypt pool there is mining digibyte & verge primarily.

Maybe but Coinbase can exchange BTC to Litecoin for free and it's money in your pocket whatever it's stored as.

Mining is quite split there:

Doge (scrypt) - 363.5 GH/s
Via (scrypt) - 363.5 GH/s
Myriad (scrypt) - 363.5 GH/s
Ninja scrypt - 213 GH/s
Gulden (scrypt) - 155 GH/s
Linda (scrypt) - 105.4 GH/s
Campus (scrypt) - 94.3 GH/s
Pink (scrypt) - 59.5 GH/s
Digibyte (scrypt) - 41.2 GH/s
Verge (scrypt) - 38.1 GH/s
Litecoin (scrypt) - 32.6 GH/s

[coreshift]

Invalid shares don't count towards reported hashrate in the dashboard, right? Only valid shares count?

[Nexworks]

Hi,
A few months ago MiningPoolHub switched my mining power to XVG.  I had been mining SXC and I think there was a fork in the wallet software?

Now I'd like to get a payout on the Verge (XVG) I mined during that time, but I can't enter a wallet # into the Verge payout page (the textbox is disabled).  How do I get a payout on my Verge coins?

John

The box on the right copies from the wallet box on the left. Enter your address there

[poby]

1070 ti better only on max power, in mining with stable efficient power both wont much different, so for price wise 1070 is better

In my experience the 1070ti is worth every penny extra.  I have a rig of 8 x 1070's and a rig of 8 x 1070ti's and the latter mine around 10% more than the former.  All overclocked and power limit set to 65%.  The power drawn from the wall is identical. (around 1kw each rig)

[Ventrue]

Hello,
how long to enable again autoexchange from Bittrex Siacoin? The wallet is OK already as you can see here
https://bittrex.com/status

THks!

[rednoW]

verge-verge-verge!!! x17. PLEASE!!!

[sir_blacks]

hello

one small request pls implement option to set timing GMT for each local place using only one UTC sistem is ...

thx

[paulpoco]

Well now it will take even longer to reach the previous 0.002 BTC min withdrawal.

BTC from 0.002 to 0.0028
Fee from 0.0003 to 0.0008 yes that will be  from $4.65 to $12.40.

I picked the wrong Auto Exchange and have been waiting to reach the BTC min withdrawal and then switch to a lower fee coin.  Funny as I get close to having enough, the goal post changes.  I will wait till my balance has been reached then switch but wait a bit for the unconfirmed to finish.

Oh well.

I understand the fee increase as BTC is terrible for high fees.