Cloud mining is not mining and almost always a scam. 

Staking is not mining.  Its more akin to investing and drawing interest than it will ever be mining.

People try to stretch and manipulate the meaning of mining...but here mining is Proof of Work.  Everything else is something else.

Funny check price and ETC is $33-$34 right this minute including kracken and other exchanges. 

Nothing of value is ever mined on phone.  And 99% of “mining” on phone is scam....phones are no good for any mining.

Sure it can work for 220v.  More importantly 220v is more efficient in the psu. (go look at the efficienty charts). Thats the reason to go higher voltage.  The wire is rated to 600V.  You can run 20amps of either on it.  It requires diffenent breakers and outlets but the wire is the same. So keeping at 80% of breaker size (standard rule of thumb safety) 120v = 1860watts and 220v = 3840watts...all over the same 12-2 wire and on the appropriate 20a breaker for each. Check the NEC code book.

Here ya go:

(now $7 due to bull market)

https://www.amazon.com/XT-XINTE-Adapter-Converter-Multiplier-Mining/dp/B07C79YLD9/ref=sr_1_5?dchild=1&keywords=m.2+to+pcie&qid=1618605926&sr=8-5

I would plug the mini 4pin off the atx psu directly to the board...the sata adapter is not advisable.  But $7 beats paying $30 for one with a 4pin full size molex adapter.

3060 = 120W
2060 = 140W
2060 = 140W
1080ti = 170W
1070ti = 130W


= 700W so even with Mobo and pcie  you should be ok...will be close...but you can always come down a little in gpu power (115/130/130/160/110) if you have too.

Check and make sure it has enough power plugs for the PCIe 6 & 8 pins but total watts looks doable.

If you cant take the rocks and slings then your project is definitely not worth anyones time.

The proof your project is worthy is up to your side to prove...no one owes you or this so called project anything.

You obviously didnt look at thier web page maybe start there. 

https://www.awesomeminer.com/

Seems very developed.  You do realize this product started in 2014 and is still maintained and updated today.  I dont use windows, but i guess you havent read up all it does and manages. 

Rushed...hehe...yeah they have been doing this longer than most.   They use all the miners available, this is a management front end. 

Well if you have a way to read the excess power avilable in machine format then maybe a small rasberry pi could be made to monitor the power and control which units are turned on.  Then should be easy to script a simple loop to check excess power and a set of rules to handle which units are on at what point.  But should be dosble.  Maybe set the time it checks adjusts what on to 5 / 10 / 15mins so you arent constantly up / down.  The pieces exist just gotta bring them together.  What a nice problem to have.

You should probably go check with the folks doing FPGA work for mining.  They are using much more powrful FPGAs and even then its not easy to out do GPUs.  The compute heavy algos end up owned by Asics or overloaded with number of FPGAs vs emissions for a given coin.  The best of class FPGAs can do ETH but only at power savings vs GPUs and require considerable hardware and time investment.  Most want to be water cooled and not just forced air.  I doubt that board would do much of anything based on the size cooler on it.  If it uses that little it doesnt have a chance.  You want a powerful FPGA for look at JC35 or CVP-13.

Have you looked at total network hashrate.....your answer lies there.

Eth hashrte has increased by around 50Ths in the last week. About 10% every week increase since start of the year.

Profitability.  Eth is the most profitable coin to gpu mine and so EVERYBODY is mining it.

Thus Difficulty rising.

Figured it might have been pre coffee...morinin’

Ive found with this board that the molex needs to be applied to the board on all 12 of them i run.  And yes must be from same psu that is powering the rest of the motherboard.  Seeing as this was done then board doesnt work its pretty obvious its the problem.  Mine have been up and running for years.  Best $79 boards around.  

The rule is you never cross psus on motherboards...or on a gpu/riser.  Becuase as you have seen it can kill the gear.

Sorry about the learning experience..mine long enough with enough gear mistakes will be made...gear will get toasted....learn from it.

But the board itself is probably the best high count gpu mining board made.


Im not gonna get into a pissing contest here.  The board works great.  I have no issues gettting 13gpus on them.  Sorry about your luck.  And lets all try not to be a-holes to each other.  You made a mistake, its not Asrocks fault.  You didnt follow the directions and plugged a cable in wrong.  Not the end of the world...but yeah sucks. 

(Ask me about putting a 240v psu into a 120v and it ran low but ran...and smoke a gpu in the process.....i blame myself...as you should blame yourself there is no other fault but our own actions).

What are the wattage requirements of the fans?

Add those up and compare against 54W for a sata plug/chain

Tell them to go to the github and click on the beta...you posting links is not to be trusted.... although i believe it is correct..you need to understand many people post malicious links and only the posts from the dev himself are to be trusted for links to mining software.

Well with a lot of miners not able to mine (as seen above) how does that benefit the dev?
Your ideas are not well thought through.

Only $33k worldwide 24hr volume.  Thsts not much.

So low liquidity coin with single market.  Good market but not much depth.  Maybe it will improve. 

Since AMD i suggest TeamRedMiner  see if you get the same error

Linux...mmpos specifically...but ethos will do it too...i expect most linux will.