A few coins on my balance exceeds the limit. I wanted to withdrawal, but was refused. I got a warning about address you entered could not be validated. What is it?
I have the same problem. I also have a few coins where the balance exceeds the limit and the withdrawal is refused. I get the same warning about the address that it is not validated. However i use a good address that i use for other transactions. I had this problem for example for het dogecoin wallet. In the past i had a few withdrawal transactions stucked.... i also try to write to support, but i wasn't never able to recover from that situation. On my account that transactions are still stuck. I will try another withdrawal now but probably yours, as mine, is just a fake balance. No money avaiable there. Sorry. I think it is over. The coins will never be able to withdrawel i think if i read the latest posts. But it doesn't matter to me. We didn't have to pay either for this. Too nice to be true perhaps. I am pretty sure this was a scam to get people who are interested in bitcoin's email addresses to sell for target marketing. No need to continue to sign up or try to withdraw, just forget it and don't get scammed. |
|
|
|
However if you want to make it a little more realistic, adjust that hash rate down to something you will actually see pool side. You will get nowhere near the advertised hash rate on average. At least I don't. That changes the picture quite a bit. BTW, nice power rate, most of us could only wish.  Yea agreed, I get on average around 230-240 MH/s, so that needs to be factored into the payback. In all, these are just too high priced for me to pull the trigger on one. Although I would like Inno to come back to this thread and make a comment on the under performing hashrate of these units. I assume there is no planned compensation or anything they will do about them running 15 to 17% slower than advertised? |
|
|
|
I will place down $5.69
To fully explain this to anyone reading: not that I will pick you or generalt but it is not an auction it is name your price from 1 to 60 plus shipping of 25. So 300 people could pick 55.55 and some one could pick 2.22 along with your 5.69 pick and generalt's 5 dollar pick and I could chose the guy that picks 2.22 So this is technically not an auction or a standard sale it is something different then both. Yep, I saw that and could use a PSU such as this for my baikal miners, so I threw an offer out there. Just picked a number outta my butt to be honest, lol. Got any 6 pin to barrel adapters? I will poke around as I am doing a general clean up over the next 3 -4 weeks. I saw 1 six pin to 3 dc barrels the other day. question is where did I put it? i would appreciate it, good luck with your sale  |
|
|
|
I will place down $5.69
To fully explain this to anyone reading: not that I will pick you or generalt but it is not an auction it is name your price from 1 to 60 plus shipping of 25. So 300 people could pick 55.55 and some one could pick 2.22 along with your 5.69 pick and generalt's 5 dollar pick and I could chose the guy that picks 2.22 So this is technically not an auction or a standard sale it is something different then both. Yep, I saw that and could use a PSU such as this for my baikal miners, so I threw an offer out there. Just picked a number outta my butt to be honest, lol. Got any 6 pin to barrel adapters? |
|
|
|
I guess I don't get how you get to $2200 per machine, the 470's are $210 ea and the PSU is $280. That comes to 1540. Then you have MOBO, CPU, HD, and RAM which is roughly $60, $45, $45, and $40 respectively. That comes to $1730 total per machine and that is brand new mind you. I know you say yours is brand new, but as soon as you open those boxes they are no longer brand new and will not fetch brand new prices. As such, I would expect each rig to fetch $1500 to $1600. A markup of $500 is really extreme. If your willing to be reasonable I would be happy to negotiate a price more in line with what I could buy each of those parts for.
Apparently everything in Europe is overpriced due to the VAT 20% charge for electronics. I didn't realize that this was Europe. Still though, 1730 * 1.2 = 2076, still not 2200 and they are used equipment. |
|
|
|
|
I guess I don't get how you get to $2200 per machine, the 470's are $210 ea and the PSU is $280. That comes to 1540. Then you have MOBO, CPU, HD, and RAM which is roughly $60, $45, $45, and $40 respectively. That comes to $1730 total per machine and that is brand new mind you. I know you say yours is brand new, but as soon as you open those boxes they are no longer brand new and will not fetch brand new prices. As such, I would expect each rig to fetch $1500 to $1600. A markup of $500 is really extreme. If your willing to be reasonable I would be happy to negotiate a price more in line with what I could buy each of those parts for.
|
|
|
|
|
I am confused. is it $2200 for 3 machines that each have 6 470 GPUs? So that is a total of 18 GPU's total?
Also, what is hosting costs for these and what would it cost to have them shipped to me?
|
|
|
|
Hello.
Excuse me for my ignorance but could somebody explain to me how this lending works?
Are those leased btc intended to be used only on poloniex for trading or
users that borrow this BTC can use them outside the exchange for other purposes?
If so what is used as collateral for the borrowed BTC?!
How this work?
Thanks.
You are putting up bitcoin that is being used to trade of margin. So if someone only has 1 btc, by borrowing some coins from you, they are able to trade as if they had say 5 btc. They cannot withdraw your coins and if the price of bitcoin drops to a certain amount the site will automatically sell their position and pay you back. The risks involved are that the price drops so fast, that the site cannot sell everything and pay everyone with lent coins back, and that poloniex will get hacked. |
|
|
|
Yes, LTC now at 3.63 and falling I won't be buying any more A4's at this price. The price needs to come down. Diff increase and lower LTC price is just too much for me to justify this price point and it does not appear to be improving any time soon.
The price of LTC has increased around $4.60 per LTC today.  I saw that. Can't quite justify the price yet to pull the trigger on 3 more, but it definately helps for the one I have |
|
|
|
Yes you can say its still worth it and it is still worth it but its not like back in the days with insane profits of course.
The OP want be trying investing in cloud mining service with about $100 capital, please check on main page. I don't think it is worth for making profit although will need long time. I am doubt we can get return of investment with put the bitcoins on cloud mining service, Although it is recomended service like hashnest, because of the difficulty of bitcoins that more increase. Actually IMO the environment nowadays is much better than a few months prior to the halving. The difficulty back then was increasing very significantly while the price was in a constant decline. At least now the price has been on a steady increase. And on average the difficulty increase has been under 4.5% for 2016, makes it much easier to predict earnings if buying a device. |
|
|
|
Same here I have funds to buy more miners, but won't do it at these prices. I just started to tip toe into the Antminer's. I just bought one and will test it to see if I have issues before I buy more. Inno will have to bring prices down for me to add any more A4's.
Agreed, but I can't quite figure out where I would pull the trigger again, what do you think? $1500 or so or even less? When they charge over $200 for shipping for 1 to 2 units, I would think that is a good price point. |
|
|
|
I just received a Christmas email offer from Inno of $1760 for returning customers on the A4. So no significant price drop. I know they are offering B1 and B2 owners an additional discount which I think is 4%, but still puts the price at $1690+shipping. So still not competitive with Antminer at the moment.
Got the same email, with the recent price increase I have the funds to purchase 3 more units, but I just can't justify it at this price. |
|
|
|
|
Any advice, how would I get this to auto start up when Windows 10 starts up?
|
|
|
|
How do I download Radeon software that is not the most current version. When I go to their website, all I am able to find is the most current driver version. I have google searched and found their webpage for 15.12, but there is no download link.
not supported by them anymore, use the 2nd match in google, or the 3rd or the 4th, its up to you. Ahh gotcha, so is it just a download from a 3rd party then? Yes, I'm afraid, but I got it from Guru3D if I remember well, and my card haven't exploded this far. HAHA good to know. Thanks for your help. |
|
|
|
How do I download Radeon software that is not the most current version. When I go to their website, all I am able to find is the most current driver version. I have google searched and found their webpage for 15.12, but there is no download link.
not supported by them anymore, use the 2nd match in google, or the 3rd or the 4th, its up to you. Ahh gotcha, so is it just a download from a 3rd party then? |
|
|
|
I have been getting confused. Will I get ostracized if I post a non bitcoin setup in here? I have been working hard to get my setup up and going and want to share it |
|
|
|
But the difficulty is rising too fast. It might not be profitable soon.
Bulshit If the difficulty rises 6% or more each period, it will not be profitable. There are a million "if's" in mining and the average increase per period is under 4.5%. It is impossible to predict even semi accurately, so let everyone make their own assumptions/calculations. |
|
|
|
|
How do I download Radeon software that is not the most current version. When I go to their website, all I am able to find is the most current driver version. I have google searched and found their webpage for 15.12, but there is no download link.
|
|
|
|
So it looks like inno finally has smartened up. At this point are the new miners being bought working good. I would read through the thread but just need a quick yeah new ones are good, or no might want to wait until all the dust settles. Thanks guys and glad a fixing is coming.
Got mine yesterday, has been running with no problems |
|
|
|
|
Show Posts
