Thanks Joe
|
|
|
As I just posted: Will do fine 1) Make backup of your wallet.dat 2) Delete peers.dat 3) Delete folder blocks 4) Delete folder database 5) Adjust the magi.conf to: - Remove ALL “addnode” - Remove ALL “connect” + change (or add): listen=0 + add: connect=104.128.225.215 6) Download official chain: https://m-core.org/bin/block-chain/m-block-chain-1813042.zip 7) Extract the zip-file and put the two folder “database” and “blocks” into your .magi folder 8 ) Start the magid (wallet) (If you are getting no connect or disconnect, you are then temporary banned on the masternode. Then you have stop your magid (wallet) to wait for x hours or change your public IP. Then start magid (wallet) again) 9) When you are in sync with the 104.128.225.215 (you can look at the poolinfo (poolinfo.systms.org) to see if you are in sync with the master) then you run: checkwallet and repairwallet
Thankyou ! Finally a synced wallet.... Lost the 2000 coins i mined this morning (on the synced wallet and Yes i did check block height etc first - bit pissed about that) But, found 43 coins from August last year... go figure Well all's well in ..what ever that sayin is J
|
|
|
Is there a simple way to limit devices cos i am using 1060s and 750tis...could be the old 750tis causeing issues?
|
|
|
Hi Guys, ok so i follow these instructions from the pool GETTING STARTED FOR NVIDIA GPU MINING Below instructon for quick start using Windows systems 1. Download Nvidia drivers 384.xx or above 2. Download latest Zergpool SniffDog fork package from GitHub: https://github.com/pinpins/Sniffdogminer/releases 3. Unzip and Edit the startsniffin_Zergpool_Bitcoin.bat file with notepad 4. Change the -Wallet 1AMQg6m9GPDN9HGuC3wJGpSuiZr1XQXjxi to your BTC wallet address 5. Save the file, and run just modified bat file 6. Wait about 30 mins, so SniffDog benchmark your system performance for each algo. Afterwards it will automatically choose the most profitable algorithm to mine at the time, and perform auto switch every 5 minutes. Basically i get a blue window come up says "snoopdog in da house" it stays open for a short while then closes. After this happened 40 times i got bored.... Nothing else seeems to be happening. I had a hashrate for the 1st line, that was all Any ideas? Win10, nvidia cards J You need to try another miner for that algo. I just followed the instructions, so i'll need a bit more help that that please.... https://ibb.co/f2WoMJThis is what i get
|
|
|
Hi Guys, ok so i follow these instructions from the pool GETTING STARTED FOR NVIDIA GPU MINING Below instructon for quick start using Windows systems 1. Download Nvidia drivers 384.xx or above 2. Download latest Zergpool SniffDog fork package from GitHub: https://github.com/pinpins/Sniffdogminer/releases 3. Unzip and Edit the startsniffin_Zergpool_Bitcoin.bat file with notepad 4. Change the -Wallet 1AMQg6m9GPDN9HGuC3wJGpSuiZr1XQXjxi to your BTC wallet address 5. Save the file, and run just modified bat file 6. Wait about 30 mins, so SniffDog benchmark your system performance for each algo. Afterwards it will automatically choose the most profitable algorithm to mine at the time, and perform auto switch every 5 minutes. Basically i get a blue window come up says "snoopdog in da house" it stays open for a short while then closes. After this happened 40 times i got bored.... Nothing else seeems to be happening. I had a hashrate for the 1st line, that was all Any ideas? Win10, nvidia cards J
|
|
|
Will i be able to mine this on my single 750ti?
|
|
|
Guys Thanks for all the replies, and PM's. Waiting for wallet to sync, then will try your siggestions, another 4-6 hours yet.
One mistake i did make was i thought i had launched new wallet, and did old one by mistake....that does force a full resync each time you do that.... Def resyncing to "dtc_win_bin_0.15.99.08" now thou.
J
|
|
|
I started mining 2 days ago and I have 35 coins
Sheesh what cpu please? My hash is only 6000 ish "localhashps": 14185.14441659692, 2 x xeon e5-2680 v2 @ 2.8GHz 40 threads Nice
|
|
|
I started mining 2 days ago and I have 35 coins
Sheesh what cpu please? My hash is only 6000 ish
|
|
|
I need an block explorer ... Dev get it out soon. There is still a lot of work to do If someone needs some Uranium, Just input your adress. Free give away http://testpool.info:91/ UraniumX Block Explorer Excellent work How accurate is this block explorer? I have 72 URX according to my wallet but only 2 in the block explorer. I have 206 URX.I'm not even on the list.I think I will adjust with time. WOW, 206URX - i have been mining since the 1st hour solid R7 1800X and have only 1 URX.... J
|
|
|
Hi Guys, Just tried solo mining to new wallet "dtc_win_bin_0.15.99.08" but as soon as i open console and tpe "setgenerate true" i get this crash https://ibb.co/eGZjty J Do you have datacoin.conf file in your datacoin data dir? Yes rpcuser=user rpcpassword=password server=1 daemon=1 listen=1 rpcallowip=127.0.0.1 rpcport=6666 You can remove all those lines from conf file and you just add nodes there. Also , check does modem block port 6666 Miner start with this # SOLO MINING server = "127.0.0.1"; port= "6666"; address = "DQD7F............................"; name = "Intel I7- ALPHA-AMD"; I'll check as soon as a i can. Each time wallet crashes, it now re-indexes....It never used to have to do that, takes about 1-2 hours each tme Might be best to go back to the old wallet J
|
|
|
Hi Guys, Just tried solo mining to new wallet "dtc_win_bin_0.15.99.08" but as soon as i open console and tpe "setgenerate true" i get this crash https://ibb.co/eGZjty J Do you have datacoin.conf file in your datacoin data dir? Yes rpcuser=user rpcpassword=password server=1 daemon=1 listen=1 rpcallowip=127.0.0.1 rpcport=6666
|
|
|
Hi Guys, Just tried solo mining to new wallet "dtc_win_bin_0.15.99.08" but as soon as i open console and tpe "setgenerate true" i get this crash https://ibb.co/eGZjty J
|
|
|
Hi guys,
Just got all synced, everything working fine now.
Is this scrypt-jane:19? I hope not cos nethash is 103 Kh/s, and my hash is 50 h/s
lol J
|
|
|
Hi, So i used this link for the wallet https://mega.nz/#!7QkEhAhD!31iMM4FuJs4UtZc7RbCTd81uN9bwraA2IHGOE0avWTY But when i try to run it i get missing file "libwinpthread-1.dll" I have many versions of this file on my pc, and all fail but one, which does not crash, i can se the blockchain growing in "roaming" folder, but i have just a blank window instead of a working wallet. Does anyone have a working wallet please? J Version of wallet? I dont know cos its just a blank box with a border, but i have posted the mega link J please wait, I'm check this problem. The wallet has finally appeared, it is now syncing, "version v0.6.6.0-TheRCG-beta" J Wallet work good? Looks like it has got stuck syncing... Can you send me a boostrap please? Completely stuck at block "279549" out of "973579" J
|
|
|
Hi, So i used this link for the wallet https://mega.nz/#!7QkEhAhD!31iMM4FuJs4UtZc7RbCTd81uN9bwraA2IHGOE0avWTY But when i try to run it i get missing file "libwinpthread-1.dll" I have many versions of this file on my pc, and all fail but one, which does not crash, i can se the blockchain growing in "roaming" folder, but i have just a blank window instead of a working wallet. Does anyone have a working wallet please? J Version of wallet? I dont know cos its just a blank box with a border, but i have posted the mega link J please wait, I'm check this problem. The wallet has finally appeared, it is now syncing, "version v0.6.6.0-TheRCG-beta" J
|
|
|
Hi, So i used this link for the wallet https://mega.nz/#!7QkEhAhD!31iMM4FuJs4UtZc7RbCTd81uN9bwraA2IHGOE0avWTY But when i try to run it i get missing file "libwinpthread-1.dll" I have many versions of this file on my pc, and all fail but one, which does not crash, i can se the blockchain growing in "roaming" folder, but i have just a blank window instead of a working wallet. Does anyone have a working wallet please? J Version of wallet? I dont know cos its just a blank box with a border, but i have posted the mega link J please wait, I'm check this problem. What N version are we on please? So i can work out my expected hashrate
|
|
|
Hi, So i used this link for the wallet https://mega.nz/#!7QkEhAhD!31iMM4FuJs4UtZc7RbCTd81uN9bwraA2IHGOE0avWTY But when i try to run it i get missing file "libwinpthread-1.dll" I have many versions of this file on my pc, and all fail but one, which does not crash, i can se the blockchain growing in "roaming" folder, but i have just a blank window instead of a working wallet. Does anyone have a working wallet please? J Version of wallet? I dont know cos its just a blank box with a border, but i have posted the mega link J
|
|
|
Hi Guys,
Anyone having issues with the wallet today? Been working fine for weeks, and fine this morning, but 6 hours ago, although i have 16 connections its stuck at block "10073".
Any ideas? Thanks J
|
|
|
|