Selling 50k V@4k SAT. Looking to sell everything. No volumes on NXT-E to do that.

Wait, I thought the BM1380 was for the S2? Do the S1 and the S2 use the same chip? Why did I think they were using different chips? I've been sick this week, and a little out of it, so my apologies for any confusion.

Lets say we went with the 0.75V @ 205MHz, and OC'd it to 245MHz. Each S1 would be making 125GH/s, and pulling 82W at the chip). That means @20% inefficiencies, and adding the fixed costs = ~130W. 8 ants would be making 1TH/s while only using 1040W (from the PSU, which means 1140W from the wall).

To devs. Please cancel all mined blocks from 40, 41, 42k's when ever first fork formed, make us all happy miners again. (I'll get some lost too)

Have you tried running it with another PSU?  I use 2 HX850s to power 3, and i was getting a sleu X on chips when i was running two on 1 PSU.  Try getting a 550W + PSU with 2 12v rails and PCI cables that arn't split and see if some of those Xs go away.  Remember to run the unit for a while because the X has taken at least 5 min to update on me before.

Also, try SSH into and and lower the clock setting in the asic-freq file located at /etc/config

You seem to know stuff, but just in case any noobs need a tip here is how to do the freq adjustment.  Start with the lowest setting, and let it mine for about 10 min before you trust the X count.  If all work move to the next freq settings.

Download Putty, and connect SSH to your miner via its IP address

type "cd /etc/config" to get to the proper place
type "vi asic-freq" to open the file you need to change
Hit "i" to enter edit mode
using arrows keys, move to the freq you want to use, and remove the # in from of all three lines.
move to the activated freq (one without #) and add the # in front of each line
Hit the escape key to leave edit mode
type ":x" and hit enter
type exit to leave putty
log into your miner via browser and apply settings on the miner config page to change to the new freq.

I own 12 S1s and have had plenty of time to troubleshoot problems, if you need more help don't hesitate to ask me in a PM.

If i helped anyone that wants to tip, please donate to the Against Hunger Foundation (http://againsthunger.org) Their BTC addy is 16EUDLfnDuQnFt9BviqpURHPpaa5oFxN2n

They do really good work and could use the funding!

From the very beginning I was impressed by this coin.I did not argue anyone on this forum.I have a right to draw attention to the warning when something goes wrong.Because I want that this coin succeed ,may be more than you think.

Thanks to developer and team

Over 613.556 versioncoins generated.Will pools start when will be mined over 1.000.000 coins?

1) screenshot?
2) what is your PSU - dead chips and rebooting are common signs that your PSU is a bit too weak (you need one rated 550W+ with at least 500W on the 12V rail to run properly)

you don't pay nothing to send it back, they will pay, and they will ship you a new one, if what you told is true, u make a photo and a screenshot.
else i don't belive you at all.
they have 10000 of customers, and no one point that(one blade shows 8 ASICs instead of 32), you are the first one.
or, you didn't buy from https://www.bitmaintech.com , and you got scamed.

you don't pay nothing to send it back, they will pay, and they will ship you a new one, if what you told is true, u make a photo and a screenshot.

else i don't belive you at all.

they have 10000 of customers, and no one point that(one blade shows 8 ASICs instead of 32), you are the first one.

or, you didn't buy from https://www.bitmaintech.com , and you got scamed.

I just received another S1 today and this one was used big time. Lots of Chinese dust all over the PCB boards and fan blades. Should I contact them and have them replace it?

Also might be a sign of things running out and new model coming out.

What is going on? Vote on cryptsy  etc. Polls are down for miners but you want to sell on all markets.This coin was mining for 12 days  (400.000 versions mined or 20% of all) and difficulty is so high like bitcoin who is mining for 5 years. This coin it seems to be fer for all miners.

Come to zeuspool. It's been up and running exactly 3 minutes after the update to the source

hashfever is being unreachable for hours and it doesn't payout. it is the same for you?

Hi, this is Yishan from reddit.  I am the CEO of the company.

I just want to confirm that this is NOT affiliated with reddit in any way, and the developers responsible do NOT have permission to use our name or our logos.  Please do not "invest" in this (it also seems a bit scammy...).

Also, if the developers do move forward with launching the coin, we will be forced to take legal action to protect our trademarks (something you have to do to avoid dilution).  I don't want to do that, so I would really prefer it if the devs responsible for this would voluntarily shut down this project.  Again, it is not in any way sanctioned by reddit.

Gridseed is doing 300 khs at 50-60 watts these days. They claimed 10 watts, but none of the reviews show that low power use.

Even a $200 ($230 now) R9-270 will do 450khs at 150 watts. Hardly 10-20x the power.

We thank everyone for supporting us in the postivie aswell the negative way . 

Folks, for this coin to be reliable the pool operators can't simply copy/paste it into the MPOS.  We've gone through a TON of work/rework to make this coin stable and allow for you to mine it! Those pools are showing RPC connection errors because they haven't taken the time to fix their pool to work correctly with Version.

With that in mind, v.zeuspool.com is very stable.