|
Are these units shipping yet?
|
|
|
|
|
Are you talking about the black rubber bridge hose between the two waterblocks?
If so you can replace it with a better hose and clamps.
|
|
|
|
Nice sounds like these will be in our hands soon.  |
|
|
|
|
How many PSU's do you have left? I may take all of them.
|
|
|
|
|
They are custom made cables, you can easily get the parts and tools to make them though.
|
|
|
|
All machines run in my 73-78F farm for the last 4 months at 1.22-1.35TH depending on the unit(I prefer to run cooler for longevity's sake). Will grab some pics today.
One has been repaired and has wires soldered directly to the hashing board with ring terminals on the end(connects directly to the breakout board on the PSU). The rest are perfect.
Have original Spondoolies boxes.
Prefer bulk sale and BTC for payment.
I know what these are worth, don't bother offering $200/unit, you're wasting my time and your own.
Also have 4 S3s(platinum PSUs for these as well) and 2 S2s(stock gold Enermaxes in these), if you're interested in those.
Let the offers flow!
If these do not sell in a couple weeks I would be interested in all of them since your in pickup range. |
|
|
|
USA South. I have rooms for miners that are sound proofed from the rest of the house. I am just trying to figure out how much room I got.
do you have a limit on the amount of power you have available to you either from the power company OR in terms of your breaker-box? Of course I have limits. I wish I had unlimited lol. The power company has upgraded my feeds and given me my own upgraded transformer on the pole though. I will let everyone know when I figure out what i have left after I finishing setting up my own equipment. |
|
|
|
|
USA South. I have rooms for miners that are sound proofed from the rest of the house. I am just trying to figure out how much room I got.
|
|
|
|
|
All depends how many watts you want to run off each breaker box.
How are the three transmformers wired in?
Obviously thinner wire is cheaper. Usually you run thick wire to a distribution point then run smaller wires to sub panels from there.
As the electrical question you are asking are pretty basic and seems like your install is above what I would call an easy one, I recommend you call and electrician and also be prepared to pay for permits and inspections from your local government.
|
|
|
|
|
I would do a whole house surge protection, pretty cheap and much more efficient.
|
|
|
|
|
Are you sure that is #4 AWG from your meter? That does not sound right. That is only about 90 amps capable wire.
With 3 phase using line to line assuming a Wye feed your voltage would be 208. So I would guess about 33KW of power. (That maybe off did it in my head)
Can I know more about your service feed? Is it Wye, Delta, or even high-leg? Is the voltage 120/208? could also be 277/480 or 120/208/240.
The info seems off to me cause at that wire gauge you have less available power then your standard 200A residential service.
Or did you mean 0/4 gauge?
|
|
|
|
|
As long as no one can get to them you may be okay as long as you are not near the coast.
Very high humidity might be an issue over time.
They will not cause condensation cause they will always be warm.
Try blowing them out with an air compressor every month or so to keep dust under control.
|
|
|
|
|
Each unit uses about 2628 Kwh per month, so you can base your math by using that number.
Might want to see about hosting them or find someone with a cheap electrical contract that will host and split the BTC with you.
Seems you used W instead of kwh, sucks man I wish you the best.
|
|
|
|
If i can find someone with around 5KW of free power I have a deal for you.
I have 5KW+ available. |
|
|
|
|
Miners have been paid for and shipped.
Thanks everyone.
|
|
|
|
|
Currently have deal pending.
|
|
|
|
|
I have both free power and old gear. I live in the USA.
|
|
|
|
|
Responded to all PMs, Thanks for the interest.
|
|
|
|
|
I am looking to sell 8 of my SP20E's. They all hash correctly no problems with any of them. They are all currently up and running. I have the original packaging and boxes for all units.
These are shipping from Houston, TX. Buyer will pay shipping or provide shipping labels. If buyer prefers escrow, the buyer will be paying this fee. Escrow through OGNasty or TomatoCage.
I will accept BTC or Wire Transfer as payment when shipping items, and BTC or Cash for local pickup.
I am asking for $375 + shipping and escrow per unit if you buy the lot.
I can provide pictures if you prefer to see them later tonight.
Thanks for looking,
MC
|
|
|
|
PM or post
Thank you very much.
PM'd |
|
|
|
|
Show Posts
