Hi,
I started mining LTCD on October 25 on CoinMine.pw and I withdrew the total amount. Unfortunately, I have not received my LTCD coins to my wallet and it's been about 20 hours now. Is there anyone I can contact to discuss this issue? Any help would be appreciated.
Thank you.
The admin is on vacation. Regarding LTCD see some posts above!
|
|
|
The reward is now much higher than during last weeks.
Yeah, block reward at nonce pool is currenly often in the xxx area
|
|
|
May need optimization .. prior reports: Got 60 now 24 on 3570k
I got now around 10kH/s but was 25k
Was testing the 3 different miners I downloaded. With the generic version that Spexx provided, my desktop CPU got 3-4 kh/s. With the core2 miner from MarcusDE I'm getting 7-8 kh/s. The both VPS have a little less than 50% of what they had before. Now my total is 20 kh/s on average instead of 50 kh/s before. What do you think, is that ok?
|
|
|
A fork of the code here works now in my vps: https://github.com/magi-project/m7m-cpuminer-v2git clone https://github.com/magi-project/m7m-cpuminer-v2 cd m7m-cpuminer-v2 ./autogen.sh CFLAGS="-O3" ./configure make sudo cp minerd /usr/local/bin Edit, corrected the guide nowGreat, got it running now. Thanks! My total hashrate decreased from 50 kh/s (2 thread AMD Athlon X2 220 + 2 VPS) to 15 kh/s.
|
|
|
My Digital Ocean VPS works now.
On the other VPS, I'm getting this with the command MAKE
magi@104:~/m7m-cpuminer-v2$ make make all-recursive make[1]: Entering directory `/home/magi/m7m-cpuminer-v2' Making all in compat make[2]: Entering directory `/home/magi/m7m-cpuminer-v2/compat' Making all in jansson make[3]: Entering directory `/home/magi/m7m-cpuminer-v2/compat/jansson' make[3]: Nothing to be done for `all'. make[3]: Leaving directory `/home/magi/m7m-cpuminer-v2/compat/jansson' make[3]: Entering directory `/home/magi/m7m-cpuminer-v2/compat' make[3]: Nothing to be done for `all-am'. make[3]: Leaving directory `/home/magi/m7m-cpuminer-v2/compat' make[2]: Leaving directory `/home/magi/m7m-cpuminer-v2/compat' Making all in m7 make[2]: Entering directory `/home/magi/m7m-cpuminer-v2/m7' g++ -DHAVE_CONFIG_H -I. -I.. -g -O2 -MT m7hash.o -MD -MP -MF .deps/m7hash.Tpo -c -o m7hash.o m7hash.cpp m7hash.cpp: In function ‘uint256 hash_M7M_v2(T1, T1, unsigned int)’: m7hash.cpp:126:52: error: ‘numeric_limits’ is not a member of ‘std’ m7hash.cpp:126:52: error: expected primary-expression before ‘double’ m7hash.cpp:126:52: error: expected ‘)’ before ‘double’ m7hash.cpp:126:66: error: expected ‘)’ before ‘;’ token m7hash.cpp:126:66: error: expected ‘)’ before ‘;’ token m7hash.cpp:126:66: error: expected ‘)’ before ‘;’ token make[2]: *** [m7hash.o] Error 1 make[2]: Leaving directory `/home/magi/m7m-cpuminer-v2/m7' make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory `/home/magi/m7m-cpuminer-v2' make: *** [all] Error 2 magi@104:~/m7m-cpuminer-v2$
magi@104:~/m7m-cpuminer-v2$ sudo cp minerd /usr/local/bin [sudo] password for magi: cp: cannot stat `minerd': No such file or directory magi@104:~/m7m-cpuminer-v2$
If you use the version using m7hash.cpp open that file and add to the top #include <limits> and it will compile at least it worked for me Thanks for your suggestion, unfortunately I'm not really familiar with linux (just followed the step by step tutorial). But meanwhile I got it running.
|
|
|
How about the third of the original hashrate, will this be compensated by the reward (which was already very low regarding the reward of the beginning)
Since switching, I made nearly as much coins as before in 24h. Looks good so far. At nonce-pool the block rewards on average are higher than before (now mostly 11 coins instead of 5 per block).
|
|
|
I like Cryptsy, but the support is really poor.
2 tickets pending, 1 (withdrawal of XRP) waiting for nearly 1 week, to other ticket 2 weeks and still no progress.
Will move my funds and future tradings to a competitor.
XRP has a few issues we are ironing out since we use a third party to process our transactions. We hope to have the kinks worked out within a few days. Yours should get resent soon If nobody bothered to reply to jawitech's and other customers tickets to explain the situation it could cost Cryptsy lost business. You could at least reply to their tickets telling them what you said here. Where's the "Like" button? :-) Exactly. No problem to wait if I know there are problems and you are working on it. But support only sent a default reply (we will take care, be patient) and nothing happens for days. That's poor support...
|
|
|
With my home PC CPU i got around 10-13 kh/s with the old miner, now 3-4 kh/s with the new one
Any solution for the VPS problem, Joe?
|
|
|
VPS Problem :
One out of three is working, other only booooo.
Failure on : sudo cp minerd /usr/local/bin
cp cannot stat miner : no such file or directory.
Any Idea?
When installing on the second VPS, I experieced the same error It seems it uses the old miner instead of the new, i see 10 khs instead of 2,7 khs per thread. Also get an error in the make : m7hash.cpp line 126:52 and 126:66. Seems I found the mistake in Joe's updated tut: cd git clone https://github.com/noncepool/m7m-cpuminer-v2cd m7magi-cpuminer Shouldn't it be cd m7m-cpuminer-v2 as the other path is the old miner? Doing this way, it works now with the new miner on nonce-pool I didn't make that mistake, but still not working. See here, a problem with the make command causes this problem on my second VPS. Maybe the same at yours.
|
|
|
My Digital Ocean VPS works now.
On the other VPS, I'm getting this with the command MAKE
magi@104:~/m7m-cpuminer-v2$ make make all-recursive make[1]: Entering directory `/home/magi/m7m-cpuminer-v2' Making all in compat make[2]: Entering directory `/home/magi/m7m-cpuminer-v2/compat' Making all in jansson make[3]: Entering directory `/home/magi/m7m-cpuminer-v2/compat/jansson' make[3]: Nothing to be done for `all'. make[3]: Leaving directory `/home/magi/m7m-cpuminer-v2/compat/jansson' make[3]: Entering directory `/home/magi/m7m-cpuminer-v2/compat' make[3]: Nothing to be done for `all-am'. make[3]: Leaving directory `/home/magi/m7m-cpuminer-v2/compat' make[2]: Leaving directory `/home/magi/m7m-cpuminer-v2/compat' Making all in m7 make[2]: Entering directory `/home/magi/m7m-cpuminer-v2/m7' g++ -DHAVE_CONFIG_H -I. -I.. -g -O2 -MT m7hash.o -MD -MP -MF .deps/m7hash.Tpo -c -o m7hash.o m7hash.cpp m7hash.cpp: In function ‘uint256 hash_M7M_v2(T1, T1, unsigned int)’: m7hash.cpp:126:52: error: ‘numeric_limits’ is not a member of ‘std’ m7hash.cpp:126:52: error: expected primary-expression before ‘double’ m7hash.cpp:126:52: error: expected ‘)’ before ‘double’ m7hash.cpp:126:66: error: expected ‘)’ before ‘;’ token m7hash.cpp:126:66: error: expected ‘)’ before ‘;’ token m7hash.cpp:126:66: error: expected ‘)’ before ‘;’ token make[2]: *** [m7hash.o] Error 1 make[2]: Leaving directory `/home/magi/m7m-cpuminer-v2/m7' make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory `/home/magi/m7m-cpuminer-v2' make: *** [all] Error 2 magi@104:~/m7m-cpuminer-v2$
magi@104:~/m7m-cpuminer-v2$ sudo cp minerd /usr/local/bin [sudo] password for magi: cp: cannot stat `minerd': No such file or directory magi@104:~/m7m-cpuminer-v2$
|
|
|
VPS Problem :
One out of three is working, other only booooo.
Failure on : sudo cp minerd /usr/local/bin
cp cannot stat miner : no such file or directory.
Any Idea?
When installing on the second VPS, I experieced the same error It seems it uses the old miner instead of the new, i see 10 khs instead of 2,7 khs per thread. Also get an error in the make : m7hash.cpp line 126:52 and 126:66. Seems I found the mistake in Joe's updated tut: cd git clone https://github.com/noncepool/m7m-cpuminer-v2cd m7magi-cpuminer Shouldn't it be cd m7m-cpuminer-v2 as the other path is the old miner? Doing this way, it works now with the new miner on nonce-pool
|
|
|
VPS Problem :
One out of three is working, other only booooo.
Failure on : sudo cp minerd /usr/local/bin
cp cannot stat miner : no such file or directory.
Any Idea?
When installing on the second VPS, I experieced the same error
|
|
|
Nonce-pool seems to be working now with the new miner
|
|
|
For VPS mining, �added a link at the very top of OP.
Did as stated, connected to nonce-pool. Af first I got a timeout, now only getting Boooo's With my VPS getting only Booo's at suprnova, too. Correct? cd git clone https://github.com/noncepool/m7m-cpuminer-v2 cd m7magi-cpuminer ./autogen.sh CFLAGS="-O3" ./configure makeYes, this is right. My linux mining using the m7m-cpuminer-v2� code in nonce-pool is ok, no difference from VPS mining. Let me confirm VPS mining. Yes, please check. Doesn't work for me on both pools with your tut since algo switch. On my home pc (Win7) it works fine using Marcus 1025 miner.
|
|
|
For VPS mining, �added a link at the very top of OP.
Did as stated, connected to nonce-pool. Af first I got a timeout, now only getting Boooo's With my VPS getting only Booo's at suprnova, too. Correct? cd git clone https://github.com/noncepool/m7m-cpuminer-v2 cd m7magi-cpuminer ./autogen.sh CFLAGS="-O3" ./configure make
|
|
|
Cant mine one any pool.
suprnova works fine, but can't connect to nonce-pool Attention, suprnova changed port number.
|
|
|
Ok, thanks. Spexx new 64 miner works @ nonce-pool Edit: now I can't connect to nonce-pool
|
|
|
Joe, how to update my VPS miner?
|
|
|
In case you need first figures: AMD Athlon X2 220 2,8 GHz @ suprnova miner: cpuminer_win64_magi_byMarcusDe-core2-1025 with 2 threads
|
|
|
The new miner doesn't work for me @ Nonce-pool
Old miner works on suprnova but not on nonce-pool
We have switched back to the old algo until 9:30 I guess hmm.. ok i'll start 7127 again too... very odd Guys, you make me crazy btw, how to update my VPS miner?
|
|
|
|