[TX]TRANSFER - BITTREX - MULTIPOOL - ANDROID - POS,TOR,MN, STEALTH

[WigitGetIt]

I got the coin details updated at Safecex. Please vote for us to be added, as I think we could handle another exchange. You do have to register to vote, and the voting is Free

They have a lot of good coins listed, so you could also trade some of your other favorites there too.

https://safecex.com/coin/add?q=TX

Thank You

wigitgetit

[socal]

Welllllll Arch hurt me bad....lets hope TX is gentle with me

[chey]

I got the coin details updated at Safecex. Please vote for us to be added, as I think we could handle another exchange. You do have to register to vote, and the voting is Free

They have a lot of good coins listed, so you could also trade some of your other favorites there too.

https://safecex.com/coin/add?q=TX

Thank You

wigitgetit

Voted and retweeted 

[avitas]

I got the coin details updated at Safecex. Please vote for us to be added, as I think we could handle another exchange. You do have to register to vote, and the voting is Free

They have a lot of good coins listed, so you could also trade some of your other favorites there too.

https://safecex.com/coin/add?q=TX

Thank You

wigitgetit

done did it yo.

[infernoman]

Welllllll Arch hurt me bad....lets hope TX is gentle with me

Well I can sure as hell tell you, That even though I like to have fun and joke. You won't find me being anywhere as unprofessional as some of the users there. From what i've seen in the past few days. I'm very disappointed with the unprofessional-ism of the company as a whole. He may very well still pull off what hes planning like we talked last night, but the amount of shakeouts, that's being caused by the CEOS with Edgar standing around letting it happen. Isn't right. Sorry for your loss man, Just not sure if its another shakeout, or there is any truth behind whats going on right now. But I wish you good luck sir

[antho281]

I got the coin details updated at Safecex. Please vote for us to be added, as I think we could handle another exchange. You do have to register to vote, and the voting is Free

They have a lot of good coins listed, so you could also trade some of your other favorites there too.

https://safecex.com/coin/add?q=TX

Thank You

wigitgetit

annnnddd.. done!

[CryptoMaik]

If anyone is having issues hosting their own Masternode due to your IP address constantly changing.  I could help.  I can host your Masternode for $1 dollar per week. My internet is business class Internet.  I got a static IP address.  You will control the private key of your Masternode.  I currently have 5 Masternodes working.  

The best part about this is the user still controls their funds ! So all you need to do is run another node. And provide the user with the masternode private key then they'll be able to start up their node remotely and watch the rewards come in

I can also help users setup their own VPS which you should be able to run multiple masternodes from, Or you can contact me over IRC to get a node at http://mn.infernopool.com/ for $5 a month

Good job nrvasquez, Maybe in the future you'll be able to turn it into a full time service and we can have multiple options for masternodes hosting just like dash

I run at the moment on one VPS 2 transfer-qt instances. But one transfer-qt has 60+ connections and sync very fast and the other only 1 or 2 connections and sync very very low.
Both are conf. to use a different port on the same ip/server. Why is the second one not sync. with 60+ nodes?

What goes wrong with the second transfer-qt?

[WigitGetIt]

If anyone is having issues hosting their own Masternode due to your IP address constantly changing.  I could help.  I can host your Masternode for $1 dollar per week. My internet is business class Internet.  I got a static IP address.  You will control the private key of your Masternode.  I currently have 5 Masternodes working.  

The best part about this is the user still controls their funds ! So all you need to do is run another node. And provide the user with the masternode private key then they'll be able to start up their node remotely and watch the rewards come in

I can also help users setup their own VPS which you should be able to run multiple masternodes from, Or you can contact me over IRC to get a node at http://mn.infernopool.com/ for $5 a month

Good job nrvasquez, Maybe in the future you'll be able to turn it into a full time service and we can have multiple options for masternodes hosting just like dash

I run at the moment on one VPS 2 transfer-qt instances. But one transfer-qt has 60+ connections and sync very fast and the other only 1 or 2 connections and sync very very low.
Both are conf. to use a different port on the same ip/server. Why is the second one not sync. with 60+ nodes?

What goes wrong with the second transfer-qt?

I am not sure what that could be. Are you running v1.2.2.2-61402 on both? This is a mandatory update. Github and wallets here http://transfercoin.io/

You could add nodes to the second one from here https://chainz.cryptoid.info/tx/#!network Click Nodes List next to /Inferno:1.2.2.2/ for nodes.
Also add maxorphanblocks=10000 (This should increase the sync time.

Be sure to restart the QT after making the changes. Drop us another note if you have anymore issues. You are also welcome to join our IRC with the link below.

https://kiwiirc.com/client/irc.kiwiirc.com/#Transfercoin

[CryptoMaik]

If anyone is having issues hosting their own Masternode due to your IP address constantly changing.  I could help.  I can host your Masternode for $1 dollar per week. My internet is business class Internet.  I got a static IP address.  You will control the private key of your Masternode.  I currently have 5 Masternodes working.  

The best part about this is the user still controls their funds ! So all you need to do is run another node. And provide the user with the masternode private key then they'll be able to start up their node remotely and watch the rewards come in

I can also help users setup their own VPS which you should be able to run multiple masternodes from, Or you can contact me over IRC to get a node at http://mn.infernopool.com/ for $5 a month

Good job nrvasquez, Maybe in the future you'll be able to turn it into a full time service and we can have multiple options for masternodes hosting just like dash

I run at the moment on one VPS 2 transfer-qt instances. But one transfer-qt has 60+ connections and sync very fast and the other only 1 or 2 connections and sync very very low.
Both are conf. to use a different port on the same ip/server. Why is the second one not sync. with 60+ nodes?

What goes wrong with the second transfer-qt?

I am not sure what that could be. Are you running v1.2.2.2-61402 on both? This is a mandatory update. Github and wallets here http://transfercoin.io/

You could add nodes to the second one from here https://chainz.cryptoid.info/tx/#!network Click Nodes List next to /Inferno:1.2.2.2/ for nodes.
Also add maxorphanblocks=10000 (This should increase the sync time.

Be sure to restart the QT after making the changes. Drop us another note if you have anymore issues. You are also welcome to join our IRC with the link below.

https://kiwiirc.com/client/irc.kiwiirc.com/#Transfercoin

I add al nodes from chainz.cryptoid. I add maxorphanblocks=10000 to transfer.conf in datadir.  I run on both qt version 1.2.2.2.-61402. I restart the qt, but still sync with 4 connections very slow.

I dont understand that 2 qt programs (same version) on two different ports on the same IP/WinServer. One has 60+ and the second only 4 a 5 connections with a lot of idle.

Could it be that one ip / server only can connect to one node and that my first qt connected is to almost all of the available nodes?

[chey]

Could it be that one ip / server only can connect to one node and that my first qt connected is to almost all of the available nodes?

This could be the case. Try putting half the nodes in one conf and half the nodes in another conf remove the peers.dat and restart the wallet.

[pokeytex]

I can tell you I am running (3) MN's from one IP and I also had a problem with the amount of connections.  However, I let it run overnight after adding all of the addnodes and it seems to have worked itself out.  Now the (3) mn's are showing 43, 13, & 11 connections which I think is plenty to operate?

[CryptoMaik]

I can tell you I am running (3) MN's from one IP and I also had a problem with the amount of connections.  However, I let it run overnight after adding all of the addnodes and it seems to have worked itself out.  Now the (3) mn's are showing 43, 13, & 11 connections which I think is plenty to operate?

Problem solved.  thanks people for advice. Qt2 connected to 11 nodes incl. my first QT on the same server.  I added my first QT as node for my second QT. (Thanks infernoman).

[WigitGetIt]

I wanted to bump this to the next page.

I got the coin details updated at Safecex. Please vote for us to be added, as I think we could handle another exchange. You do have to register to vote, and the voting is Free. Only 4 Votes

They have a lot of good coins listed, so you could also trade some of your other favorites there too.

https://safecex.com/coin/add?q=TX

If you haven't dropped Alcurex a note yet please do. Only 3 comments

https://bitcointalk.org/index.php?topic=458732.msg13611895#msg13611895

Thank You

wigitgetit

[antho281]

I wanted to bump this to the next page.

I got the coin details updated at Safecex. Please vote for us to be added, as I think we could handle another exchange. You do have to register to vote, and the voting is Free. Only 4 Votes

They have a lot of good coins listed, so you could also trade some of your other favorites there too.

https://safecex.com/coin/add?q=TX

If you haven't dropped Alcurex a note yet please do. Only 3 comments

https://bitcointalk.org/index.php?topic=458732.msg13611895#msg13611895

Thank You

wigitgetit

Done and done!

[nrvasquez]

I wanted to bump this to the next page.

I got the coin details updated at Safecex. Please vote for us to be added, as I think we could handle another exchange. You do have to register to vote, and the voting is Free. Only 4 Votes

They have a lot of good coins listed, so you could also trade some of your other favorites there too.

https://safecex.com/coin/add?q=TX

If you haven't dropped Alcurex a note yet please do. Only 3 comments

https://bitcointalk.org/index.php?topic=458732.msg13611895#msg13611895

Thank You

wigitgetit

I just voted

[WigitGetIt]

I want to Thank Everyone who has voted at Safecex. Lets make a hard push to get to the top, and get added. If you tweet add the #safecex in your tweet and it will show up in there twitter feed on the site. The more people see, the more they will become interested and check us out. Link to Vote Here: https://safecex.com/coin/add?q=TX

I have also reached out to https://1ex.trade/ and the moderator in the chat box said they will look it over. I linked them to out Thread here, the website and our Github. They should find everything needed.

I am hoping Alcurex is taking time and vetting us, to make sure we can bring enough volume, I don't think we will have an issue with volume. That is for them to decide. But we can definitely keep showing our support in there thread. Thread https://bitcointalk.org/index.php?topic=458732.msg13611895#msg13611895.

 

[pokeytex]

I can tell you I am running (3) MN's from one IP and I also had a problem with the amount of connections.  However, I let it run overnight after adding all of the addnodes and it seems to have worked itself out.  Now the (3) mn's are showing 43, 13, & 11 connections which I think is plenty to operate?

Problem solved.  thanks people for advice. Qt2 connected to 11 nodes incl. my first QT on the same server.  I added my first QT as node for my second QT. (Thanks infernoman).

Can you tell me the solution for the connection problem?  I added a 4th MN and now I can't get more than (1) connection on (2) mn's....

[nrvasquez]

I can tell you I am running (3) MN's from one IP and I also had a problem with the amount of connections.  However, I let it run overnight after adding all of the addnodes and it seems to have worked itself out.  Now the (3) mn's are showing 43, 13, & 11 connections which I think is plenty to operate?

Problem solved.  thanks people for advice. Qt2 connected to 11 nodes incl. my first QT on the same server.  I added my first QT as node for my second QT. (Thanks infernoman).

Can you tell me the solution for the connection problem?  I added a 4th MN and now I can't get more than (1) connection on (2) mn's....

Are you trying to run all 4 Masternodes in the same wallet.

[pokeytex]

I can tell you I am running (3) MN's from one IP and I also had a problem with the amount of connections.  However, I let it run overnight after adding all of the addnodes and it seems to have worked itself out.  Now the (3) mn's are showing 43, 13, & 11 connections which I think is plenty to operate?

Problem solved.  thanks people for advice. Qt2 connected to 11 nodes incl. my first QT on the same server.  I added my first QT as node for my second QT. (Thanks infernoman).

Can you tell me the solution for the connection problem?  I added a 4th MN and now I can't get more than (1) connection on (2) mn's....

Are you trying to run all 4 Masternodes in the same wallet.

No I have (4) Mn's running separate.  I cannot get the one controller wallet to (4) mn's working at all.

[WigitGetIt]

I can tell you I am running (3) MN's from one IP and I also had a problem with the amount of connections.  However, I let it run overnight after adding all of the addnodes and it seems to have worked itself out.  Now the (3) mn's are showing 43, 13, & 11 connections which I think is plenty to operate?

Problem solved.  thanks people for advice. Qt2 connected to 11 nodes incl. my first QT on the same server.  I added my first QT as node for my second QT. (Thanks infernoman).

Can you tell me the solution for the connection problem?  I added a 4th MN and now I can't get more than (1) connection on (2) mn's....

Are you trying to run all 4 Masternodes in the same wallet.

No I have (4) Mn's running separate.  I cannot get the one controller wallet to (4) mn's working at all.

I am guessing you have been through this? https://docs.google.com/presentation/d/1HuIpcifBthyvp88wRquq9txQMAoDHkemv8Ozt4euw1g/edit#slide=id.p If so, and your still having issues, please layout the setup so people have more of an idea of how to help. basically the more details the better. You don't have to give up your IP's or anything like that.