pokeytex
Legendary
Offline
Activity: 1504
Merit: 1002
|
|
January 25, 2016, 01:12:18 PM |
|
I can tell you I am running (3) MN's from one IP and I also had a problem with the amount of connections. However, I let it run overnight after adding all of the addnodes and it seems to have worked itself out. Now the (3) mn's are showing 43, 13, & 11 connections which I think is plenty to operate?
Problem solved. thanks people for advice. Qt2 connected to 11 nodes incl. my first QT on the same server. I added my first QT as node for my second QT. (Thanks infernoman). Can you tell me the solution for the connection problem? I added a 4th MN and now I can't get more than (1) connection on (2) mn's.... Are you trying to run all 4 Masternodes in the same wallet. No I have (4) Mn's running separate. I cannot get the one controller wallet to (4) mn's working at all. I am guessing you have been through this? https://docs.google.com/presentation/d/1HuIpcifBthyvp88wRquq9txQMAoDHkemv8Ozt4euw1g/edit#slide=id.p If so, and your still having issues, please layout the setup so people have more of an idea of how to help. basically the more details the better. You don't have to give up your IP's or anything like that. Yes - I followed that completely. I delete the wallet.dat and setup all of the transfer.conf correctly. I set up the masternode.conf as illustrated and create the .bat file as described. However, when I turn the .bat file on it opens up (4) more wallets with nothing in them. Then I go into the controller wallet and type masternode start (gives me an error saying to add masternode=1) the instructions explicitly say not to add masternode=1 into the transfer.conf file of the controller wallet. Then i tried masternode start on the (4) empty wallets and I get an error stating that there isn't a transaction that can be a masternode (something like that? going on memory). I am still having problems with the connection issues as well. You advised me to addnode=externalip:port but that didn't work. I still have the following connections on (4) wallets. 28, 1, 1, 7 - very weird. What is the most up to date addnode list?
|
|
|
|
WigitGetIt
Legendary
Offline
Activity: 952
Merit: 1000
|
|
January 25, 2016, 01:44:12 PM |
|
I can tell you I am running (3) MN's from one IP and I also had a problem with the amount of connections. However, I let it run overnight after adding all of the addnodes and it seems to have worked itself out. Now the (3) mn's are showing 43, 13, & 11 connections which I think is plenty to operate?
Problem solved. thanks people for advice. Qt2 connected to 11 nodes incl. my first QT on the same server. I added my first QT as node for my second QT. (Thanks infernoman). Can you tell me the solution for the connection problem? I added a 4th MN and now I can't get more than (1) connection on (2) mn's.... Are you trying to run all 4 Masternodes in the same wallet. No I have (4) Mn's running separate. I cannot get the one controller wallet to (4) mn's working at all. I am guessing you have been through this? https://docs.google.com/presentation/d/1HuIpcifBthyvp88wRquq9txQMAoDHkemv8Ozt4euw1g/edit#slide=id.p If so, and your still having issues, please layout the setup so people have more of an idea of how to help. basically the more details the better. You don't have to give up your IP's or anything like that. Yes - I followed that completely. I delete the wallet.dat and setup all of the transfer.conf correctly. I set up the masternode.conf as illustrated and create the .bat file as described. However, when I turn the .bat file on it opens up (4) more wallets with nothing in them. Then I go into the controller wallet and type masternode start (gives me an error saying to add masternode=1) the instructions explicitly say not to add masternode=1 into the transfer.conf file of the controller wallet. Then i tried masternode start on the (4) empty wallets and I get an error stating that there isn't a transaction that can be a masternode (something like that? going on memory). I am still having problems with the connection issues as well. You advised me to addnode=externalip:port but that didn't work. I still have the following connections on (4) wallets. 28, 1, 1, 7 - very weird. What is the most up to date addnode list? This should be the latest addnodes list. https://chainz.cryptoid.info/tx/#!network Click Nodes List next to /Inferno:1.2.2.2/ for nodes. From your first masternode that has the 11 connections, is that wallet the one with IP:17170? Since 17170 is the default port for masternodes, it will see the most connections. If you add that IP:Port to your addnodes it should help you get more connections to the other wallets. This seemed to work for CryptoMaik, I am hoping it will work for you.
|
|
|
|
socal
|
|
January 25, 2016, 03:12:52 PM |
|
So TX is holding up well so far.......wonder if we can get another push to 3k+
|
|
|
|
infernoman (OP)
Legendary
Offline
Activity: 964
Merit: 1000
|
|
January 25, 2016, 03:36:14 PM |
|
I can tell you I am running (3) MN's from one IP and I also had a problem with the amount of connections. However, I let it run overnight after adding all of the addnodes and it seems to have worked itself out. Now the (3) mn's are showing 43, 13, & 11 connections which I think is plenty to operate?
Problem solved. thanks people for advice. Qt2 connected to 11 nodes incl. my first QT on the same server. I added my first QT as node for my second QT. (Thanks infernoman). Can you tell me the solution for the connection problem? I added a 4th MN and now I can't get more than (1) connection on (2) mn's.... Are you trying to run all 4 Masternodes in the same wallet. No I have (4) Mn's running separate. I cannot get the one controller wallet to (4) mn's working at all. I am guessing you have been through this? https://docs.google.com/presentation/d/1HuIpcifBthyvp88wRquq9txQMAoDHkemv8Ozt4euw1g/edit#slide=id.p If so, and your still having issues, please layout the setup so people have more of an idea of how to help. basically the more details the better. You don't have to give up your IP's or anything like that. Yes - I followed that completely. I delete the wallet.dat and setup all of the transfer.conf correctly. I set up the masternode.conf as illustrated and create the .bat file as described. However, when I turn the .bat file on it opens up (4) more wallets with nothing in them. Then I go into the controller wallet and type masternode start (gives me an error saying to add masternode=1) the instructions explicitly say not to add masternode=1 into the transfer.conf file of the controller wallet. Then i tried masternode start on the (4) empty wallets and I get an error stating that there isn't a transaction that can be a masternode (something like that? going on memory). I am still having problems with the connection issues as well. You advised me to addnode=externalip:port but that didn't work. I still have the following connections on (4) wallets. 28, 1, 1, 7 - very weird. What is the most up to date addnode list? Theres the issue, try using "masternode start-many" or "masternode start-alias" also add each one of your nodes as an addnode in the other 3 wallets. addnode=127.0.0.1:17170 addnode=127.0.0.1:17171 addnode=127.0.0.1:17172 addnode=127.0.0.1:17173 and the longer your clients are running the more connections they'll find. For every addnode= you have in your transfer.conf. The client checks the peers and tries to make a connection to that node.
|
|
|
|
pokeytex
Legendary
Offline
Activity: 1504
Merit: 1002
|
|
January 25, 2016, 03:39:37 PM |
|
I can tell you I am running (3) MN's from one IP and I also had a problem with the amount of connections. However, I let it run overnight after adding all of the addnodes and it seems to have worked itself out. Now the (3) mn's are showing 43, 13, & 11 connections which I think is plenty to operate?
Problem solved. thanks people for advice. Qt2 connected to 11 nodes incl. my first QT on the same server. I added my first QT as node for my second QT. (Thanks infernoman). Can you tell me the solution for the connection problem? I added a 4th MN and now I can't get more than (1) connection on (2) mn's.... Are you trying to run all 4 Masternodes in the same wallet. No I have (4) Mn's running separate. I cannot get the one controller wallet to (4) mn's working at all. I am guessing you have been through this? https://docs.google.com/presentation/d/1HuIpcifBthyvp88wRquq9txQMAoDHkemv8Ozt4euw1g/edit#slide=id.p If so, and your still having issues, please layout the setup so people have more of an idea of how to help. basically the more details the better. You don't have to give up your IP's or anything like that. Yes - I followed that completely. I delete the wallet.dat and setup all of the transfer.conf correctly. I set up the masternode.conf as illustrated and create the .bat file as described. However, when I turn the .bat file on it opens up (4) more wallets with nothing in them. Then I go into the controller wallet and type masternode start (gives me an error saying to add masternode=1) the instructions explicitly say not to add masternode=1 into the transfer.conf file of the controller wallet. Then i tried masternode start on the (4) empty wallets and I get an error stating that there isn't a transaction that can be a masternode (something like that? going on memory). I am still having problems with the connection issues as well. You advised me to addnode=externalip:port but that didn't work. I still have the following connections on (4) wallets. 28, 1, 1, 7 - very weird. What is the most up to date addnode list? Theres the issue, try using "masternode start-many" or "masternode start-alias" Ah - Do I do this from within the .bat file or the controller wallet?
|
|
|
|
socal
|
|
January 25, 2016, 04:07:42 PM |
|
btw voted for safecex
|
|
|
|
infernoman (OP)
Legendary
Offline
Activity: 964
Merit: 1000
|
|
January 25, 2016, 05:23:10 PM |
|
I can tell you I am running (3) MN's from one IP and I also had a problem with the amount of connections. However, I let it run overnight after adding all of the addnodes and it seems to have worked itself out. Now the (3) mn's are showing 43, 13, & 11 connections which I think is plenty to operate?
Problem solved. thanks people for advice. Qt2 connected to 11 nodes incl. my first QT on the same server. I added my first QT as node for my second QT. (Thanks infernoman). Can you tell me the solution for the connection problem? I added a 4th MN and now I can't get more than (1) connection on (2) mn's.... Are you trying to run all 4 Masternodes in the same wallet. No I have (4) Mn's running separate. I cannot get the one controller wallet to (4) mn's working at all. I am guessing you have been through this? https://docs.google.com/presentation/d/1HuIpcifBthyvp88wRquq9txQMAoDHkemv8Ozt4euw1g/edit#slide=id.p If so, and your still having issues, please layout the setup so people have more of an idea of how to help. basically the more details the better. You don't have to give up your IP's or anything like that. Yes - I followed that completely. I delete the wallet.dat and setup all of the transfer.conf correctly. I set up the masternode.conf as illustrated and create the .bat file as described. However, when I turn the .bat file on it opens up (4) more wallets with nothing in them. Then I go into the controller wallet and type masternode start (gives me an error saying to add masternode=1) the instructions explicitly say not to add masternode=1 into the transfer.conf file of the controller wallet. Then i tried masternode start on the (4) empty wallets and I get an error stating that there isn't a transaction that can be a masternode (something like that? going on memory). I am still having problems with the connection issues as well. You advised me to addnode=externalip:port but that didn't work. I still have the following connections on (4) wallets. 28, 1, 1, 7 - very weird. What is the most up to date addnode list? Theres the issue, try using "masternode start-many" or "masternode start-alias" Ah - Do I do this from within the .bat file or the controller wallet? Do this inside the console of the controller wallet.
|
|
|
|
pokeytex
Legendary
Offline
Activity: 1504
Merit: 1002
|
|
January 25, 2016, 06:11:06 PM |
|
I can tell you I am running (3) MN's from one IP and I also had a problem with the amount of connections. However, I let it run overnight after adding all of the addnodes and it seems to have worked itself out. Now the (3) mn's are showing 43, 13, & 11 connections which I think is plenty to operate?
Problem solved. thanks people for advice. Qt2 connected to 11 nodes incl. my first QT on the same server. I added my first QT as node for my second QT. (Thanks infernoman). Can you tell me the solution for the connection problem? I added a 4th MN and now I can't get more than (1) connection on (2) mn's.... Are you trying to run all 4 Masternodes in the same wallet. No I have (4) Mn's running separate. I cannot get the one controller wallet to (4) mn's working at all. I am guessing you have been through this? https://docs.google.com/presentation/d/1HuIpcifBthyvp88wRquq9txQMAoDHkemv8Ozt4euw1g/edit#slide=id.p If so, and your still having issues, please layout the setup so people have more of an idea of how to help. basically the more details the better. You don't have to give up your IP's or anything like that. Yes - I followed that completely. I delete the wallet.dat and setup all of the transfer.conf correctly. I set up the masternode.conf as illustrated and create the .bat file as described. However, when I turn the .bat file on it opens up (4) more wallets with nothing in them. Then I go into the controller wallet and type masternode start (gives me an error saying to add masternode=1) the instructions explicitly say not to add masternode=1 into the transfer.conf file of the controller wallet. Then i tried masternode start on the (4) empty wallets and I get an error stating that there isn't a transaction that can be a masternode (something like that? going on memory). I am still having problems with the connection issues as well. You advised me to addnode=externalip:port but that didn't work. I still have the following connections on (4) wallets. 28, 1, 1, 7 - very weird. What is the most up to date addnode list? Theres the issue, try using "masternode start-many" or "masternode start-alias" Ah - Do I do this from within the .bat file or the controller wallet? Do this inside the console of the controller wallet. Ok - when I did this last night it shot back an error that I needed masternode=1 when the instructions say not to use it. Any advice?
|
|
|
|
infernoman (OP)
Legendary
Offline
Activity: 964
Merit: 1000
|
|
January 25, 2016, 06:17:53 PM |
|
I can tell you I am running (3) MN's from one IP and I also had a problem with the amount of connections. However, I let it run overnight after adding all of the addnodes and it seems to have worked itself out. Now the (3) mn's are showing 43, 13, & 11 connections which I think is plenty to operate?
Problem solved. thanks people for advice. Qt2 connected to 11 nodes incl. my first QT on the same server. I added my first QT as node for my second QT. (Thanks infernoman). Can you tell me the solution for the connection problem? I added a 4th MN and now I can't get more than (1) connection on (2) mn's.... Are you trying to run all 4 Masternodes in the same wallet. No I have (4) Mn's running separate. I cannot get the one controller wallet to (4) mn's working at all. I am guessing you have been through this? https://docs.google.com/presentation/d/1HuIpcifBthyvp88wRquq9txQMAoDHkemv8Ozt4euw1g/edit#slide=id.p If so, and your still having issues, please layout the setup so people have more of an idea of how to help. basically the more details the better. You don't have to give up your IP's or anything like that. Yes - I followed that completely. I delete the wallet.dat and setup all of the transfer.conf correctly. I set up the masternode.conf as illustrated and create the .bat file as described. However, when I turn the .bat file on it opens up (4) more wallets with nothing in them. Then I go into the controller wallet and type masternode start (gives me an error saying to add masternode=1) the instructions explicitly say not to add masternode=1 into the transfer.conf file of the controller wallet. Then i tried masternode start on the (4) empty wallets and I get an error stating that there isn't a transaction that can be a masternode (something like that? going on memory). I am still having problems with the connection issues as well. You advised me to addnode=externalip:port but that didn't work. I still have the following connections on (4) wallets. 28, 1, 1, 7 - very weird. What is the most up to date addnode list? Theres the issue, try using "masternode start-many" or "masternode start-alias" Ah - Do I do this from within the .bat file or the controller wallet? Do this inside the console of the controller wallet. Ok - when I did this last night it shot back an error that I needed masternode=1 when the instructions say not to use it. Any advice? Last night you were also using "masternode start" correct? start-many and start-alias both have different use cases than start. try typing "masternode start-many" instead of "masternode start"
|
|
|
|
pokeytex
Legendary
Offline
Activity: 1504
Merit: 1002
|
|
January 25, 2016, 06:32:51 PM |
|
I can tell you I am running (3) MN's from one IP and I also had a problem with the amount of connections. However, I let it run overnight after adding all of the addnodes and it seems to have worked itself out. Now the (3) mn's are showing 43, 13, & 11 connections which I think is plenty to operate?
Problem solved. thanks people for advice. Qt2 connected to 11 nodes incl. my first QT on the same server. I added my first QT as node for my second QT. (Thanks infernoman). Can you tell me the solution for the connection problem? I added a 4th MN and now I can't get more than (1) connection on (2) mn's.... Are you trying to run all 4 Masternodes in the same wallet. No I have (4) Mn's running separate. I cannot get the one controller wallet to (4) mn's working at all. I am guessing you have been through this? https://docs.google.com/presentation/d/1HuIpcifBthyvp88wRquq9txQMAoDHkemv8Ozt4euw1g/edit#slide=id.p If so, and your still having issues, please layout the setup so people have more of an idea of how to help. basically the more details the better. You don't have to give up your IP's or anything like that. Yes - I followed that completely. I delete the wallet.dat and setup all of the transfer.conf correctly. I set up the masternode.conf as illustrated and create the .bat file as described. However, when I turn the .bat file on it opens up (4) more wallets with nothing in them. Then I go into the controller wallet and type masternode start (gives me an error saying to add masternode=1) the instructions explicitly say not to add masternode=1 into the transfer.conf file of the controller wallet. Then i tried masternode start on the (4) empty wallets and I get an error stating that there isn't a transaction that can be a masternode (something like that? going on memory). I am still having problems with the connection issues as well. You advised me to addnode=externalip:port but that didn't work. I still have the following connections on (4) wallets. 28, 1, 1, 7 - very weird. What is the most up to date addnode list? Theres the issue, try using "masternode start-many" or "masternode start-alias" Ah - Do I do this from within the .bat file or the controller wallet? Do this inside the console of the controller wallet. Ok - when I did this last night it shot back an error that I needed masternode=1 when the instructions say not to use it. Any advice? Last night you were also using "masternode start" correct? start-many and start-alias both have different use cases than start. try typing "masternode start-many" instead of "masternode start" Correct - Ok I will try that tonight when I get home. One more question - Once a masternode is started - if I close the wallet - is the masternode still running? If so, how do I shut a masternode off?
|
|
|
|
marcetin
Legendary
Offline
Activity: 1124
Merit: 1013
ParalleCoin's ruler from the shadow
|
|
January 25, 2016, 06:57:48 PM |
|
|
|
|
|
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- PLAN 9 FROM CRYPTO SPACE PARALLELCOIN ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ My fellow members, ask not what the community can do for you, ask what you can do for the community. CCW-WebRes-BitStickers-AnonStickers.shop------------------------------ ParallelCoin
The Secret of Success is to find out where people are going.. and get there first! - Mark Twain Bitrated user: marcetin.
|
|
|
infernoman (OP)
Legendary
Offline
Activity: 964
Merit: 1000
|
|
January 25, 2016, 06:59:10 PM |
|
I can tell you I am running (3) MN's from one IP and I also had a problem with the amount of connections. However, I let it run overnight after adding all of the addnodes and it seems to have worked itself out. Now the (3) mn's are showing 43, 13, & 11 connections which I think is plenty to operate?
Problem solved. thanks people for advice. Qt2 connected to 11 nodes incl. my first QT on the same server. I added my first QT as node for my second QT. (Thanks infernoman). Can you tell me the solution for the connection problem? I added a 4th MN and now I can't get more than (1) connection on (2) mn's.... Are you trying to run all 4 Masternodes in the same wallet. No I have (4) Mn's running separate. I cannot get the one controller wallet to (4) mn's working at all. I am guessing you have been through this? https://docs.google.com/presentation/d/1HuIpcifBthyvp88wRquq9txQMAoDHkemv8Ozt4euw1g/edit#slide=id.p If so, and your still having issues, please layout the setup so people have more of an idea of how to help. basically the more details the better. You don't have to give up your IP's or anything like that. Yes - I followed that completely. I delete the wallet.dat and setup all of the transfer.conf correctly. I set up the masternode.conf as illustrated and create the .bat file as described. However, when I turn the .bat file on it opens up (4) more wallets with nothing in them. Then I go into the controller wallet and type masternode start (gives me an error saying to add masternode=1) the instructions explicitly say not to add masternode=1 into the transfer.conf file of the controller wallet. Then i tried masternode start on the (4) empty wallets and I get an error stating that there isn't a transaction that can be a masternode (something like that? going on memory). I am still having problems with the connection issues as well. You advised me to addnode=externalip:port but that didn't work. I still have the following connections on (4) wallets. 28, 1, 1, 7 - very weird. What is the most up to date addnode list? Theres the issue, try using "masternode start-many" or "masternode start-alias" Ah - Do I do this from within the .bat file or the controller wallet? Do this inside the console of the controller wallet. Ok - when I did this last night it shot back an error that I needed masternode=1 when the instructions say not to use it. Any advice? Last night you were also using "masternode start" correct? start-many and start-alias both have different use cases than start. try typing "masternode start-many" instead of "masternode start" Correct - Ok I will try that tonight when I get home. One more question - Once a masternode is started - if I close the wallet - is the masternode still running? If so, how do I shut a masternode off? Once a masternode is started. The controller wallet can be closed. but the others have to remain open. When you shutoff your other wallets, the masternodes will automatically be removed from the list. This is awesome ! The last I checked there was only 1 or 2 shares purchased. So good job everyone ! Every node counts ! Thank you for stopping by to let us know
|
|
|
|
|
infernoman (OP)
Legendary
Offline
Activity: 964
Merit: 1000
|
|
January 25, 2016, 10:16:09 PM Last edit: January 25, 2016, 10:26:55 PM by infernoman |
|
There Has been a few requests already but we would appreciate the help from everyone if you would like to make a request yourself, and if there's any extra information you guys need for the form just let me know and I can provide it I've been working on a few update for the dynamic IP addresses which should help a bit with running a masternode on a dynamic IP address. Before you weren't allowed to use an http address like transfer2.infernopool.com and it had to be in an IP format. In the next version I'll release, the masternodes will accept http based addresses, so that the only thing youll need to do is restart your masternode after an IP change. There's been a few other things I've been working on to improve on the features so that the might be more regularly used. Currently I find myself trading on bittrex still, and using the block explorer on chainz. So if I'm doing it I imagine that others are as well. And its not that I don't like bittrex or chainz BUT I would like to improve on the wallet to the point I no longer find it troublesome to use the wallet over going to bittrex or chainz. The block explorer in the wallet needs improved upon BIG time. One of the reasons I dont use it. Is because I'm not able to see the transactions inside of a block. So it requires some use of the console to figure out which transactions are in the block your searching. Before you lookup the transaction. Another problem with the trading page, is that the order book, and the buy and sell. are on separate pages. Something that I'm also looking to improve upon to make trading less of a hassle inside the wallet. If anyone else has some feedback about the wallet I would love to hear it. Since we are waiting on the release of the android wallet and rokos. I can't do too many code changes while they are working on their releases. But I have some commits lined up already. And will release the next version for OSX/LINUX/WINDOWS after the android and rokos release.
|
|
|
|
chey
|
|
January 26, 2016, 02:43:56 AM |
|
The first graphic in the OP points to transfercoin.org which appears to be gone?
|
|
|
|
infernoman (OP)
Legendary
Offline
Activity: 964
Merit: 1000
|
|
January 26, 2016, 03:01:43 AM |
|
The first graphic in the OP points to transfercoin.org which appears to be gone?
Fixed ! Thank you for pointing that out
|
|
|
|
chey
|
|
January 26, 2016, 03:03:31 AM |
|
The first graphic in the OP points to transfercoin.org which appears to be gone?
Fixed ! Thank you for pointing that out You are welcome...it's the little things right
|
|
|
|
CosaNostra
|
|
January 26, 2016, 10:57:11 AM |
|
There Has been a few requests already but we would appreciate the help from everyone if you would like to make a request yourself, and if there's any extra information you guys need for the form just let me know and I can provide it Poloniex Coin Request Your coin request has been recorded and will be reviewed by Poloniex staff. Thank you. Please only submit this form once per user per coin.
|
|
|
|
pokeytex
Legendary
Offline
Activity: 1504
Merit: 1002
|
|
January 26, 2016, 12:10:56 PM |
|
@infernoman @geewhiz @wigitgetit - ty all for the information on the connection issues - what worked - updating the addnodes to the current list on the block explorer for the 1.2.2.2 wallet, deleting peers.on each masternode, waiting 10-20 minutes. All is good now!
|
|
|
|
WigitGetIt
Legendary
Offline
Activity: 952
Merit: 1000
|
|
January 26, 2016, 01:02:53 PM |
|
There Has been a few requests already but we would appreciate the help from everyone if you would like to make a request yourself, and if there's any extra information you guys need for the form just let me know and I can provide it Poloniex Coin Request Your coin request has been recorded and will be reviewed by Poloniex staff. Thank you. Please only submit this form once per user per coin. Poloniex Coin Request Your coin request has been recorded and will be reviewed by Poloniex staff. Thank you. Please only submit this form once per user per coin.
|
|
|
|
|