█▓▒░-< [ZPOOL.CA][BTC Multipool] The miners multipool >-░▒▓█ Paid 925+ BTC

[semajjames]

what is the "c=BTC" part of the multi algo password for ?

It is for making sure the pool knows the address is for BTC. But you you use any address of the coins we mine but it's recommended to use BTC as altcoins can be removed at anytime.

as i thought thanks

crackfoo is there any way you can make it so we can put a "worker name" into the password so it shows before the "c=btc" that way we can see our worker name on the web page under the "extras" ?  

Just put the worker name in front - seems to work OK.

-u ps,x11=4.8,x13=3.75,x15=3,quark=7.44,lyra2v2=5.7,qubit=7.2,neoscrypt=0.28,groestl=14.2,c=BTC
-p ps,x11=4.8,x13=3.75,x15=3,quark=7.44,lyra2v2=5.7,qubit=7.2,neoscrypt=0.28,groestl=14.2,c=BTC

The first thing I see under extras is 'ps' and the rotation and difficulty changes still work.

great seems like "-u" not needed either or "-p"
thanks

[AngryDwarf]

@JaredKaragen - How is the income holding up? Last test over on hashpower.co took about 14-15 hours for 1 mBTC for me, which is on par with the recent zpool BTC mining test, which did seem to be a massive improvement on less recent earnings.

[JaredKaragen]

@JaredKaragen - How is the income holding up? Last test over on hashpower.co took about 14-15 hours for 1 mBTC for me, which is on par with the recent zpool BTC mining test, which did seem to be a massive improvement on less recent earnings.

Still going strong.  I am really kind of baffled at the differences between a month ago and now given the fact that the pool's code hasn't really changed.   The major difference is I moved my S3 from my parents house to my house;  My internet here was very crappy last month and I moved it there to see what the latency difference of a fiber connection would have... if any.   it was very minor;  just fewer rejected shares due to a block found during transmission to the pool.

I am still seeing two payments/day for at lease 2.2-2.8mBTC;  which yesterday got me just above 5.5mBTC during both periods that there are 2 payments in the 24/hour earnings graph.  I noticed the pool's short-term earnings estimate in the upper right for SHA was 0.0033/Gh;  yet luck/profitability seemed to be right about where it normally is (maybe one device more profitable in that time?).

So by this figure ~0.165BTC/Mo (~$72) if the current profitability holds true... again;  I being lucky enough to have an unfettered power connection at my residence =)

[crackfoo]

I'm surprised no one is interested in mining DCR on zpool...

Is anyone here mining it, but just on the couple big pools?

[JaredKaragen]

I'm surprised no one is interested in mining DCR on zpool...

Is anyone here mining it, but just on the couple big pools?

I need to get off my butt and give it a shot... but that means setting up a new miner app;  and adding it to my round of algorithms.
Hopefully sometime in the next few days ill have the chance to get to it.    I am personally curious on it's profitability compared to the other algos.

[crackfoo]

I'm surprised no one is interested in mining DCR on zpool...

Is anyone here mining it, but just on the couple big pools?

I need to get off my butt and give it a shot... but that means setting up a new miner app;  and adding it to my round of algorithms.
Hopefully sometime in the next few days ill have the chance to get to it.    I am personally curious on it's profitability compared to the other algos.

Yes, I myself am having problems with the actual miners so perhaps that some of the problem being a one off algo. It's got some high diff too so perhaps thats a turnoff.

Hoping a team of miners drops by to kick off the blocks and keep them rolling.

[JaredKaragen]

Yeah.  Typically when trying a new algo ill give it a minimum of 24Hrs by itself just to see what my 24 hour graph looks like;  see if its worth adding it to my list.


The fact that the short term profitability shows Zero still;  is a turnoff for most I would think;  but that happens with every algo when its brought in.

I think i spent 3 days on DMD-GR before I gave up on it; and it ultimately got removed.   I dont even think there were any found blocks on that algo.

*edit* does the pool's code monitor the Deltas of the coins difficulty as they change throughout the day?   This is more of an advanced question;  so im not expecting an answer....

[s7icky]

I'm surprised no one is interested in mining DCR on zpool...

Is anyone here mining it, but just on the couple big pools?

I need to get off my butt and give it a shot... but that means setting up a new miner app;  and adding it to my round of algorithms.
Hopefully sometime in the next few days ill have the chance to get to it.    I am personally curious on it's profitability compared to the other algos.

Yes, I myself am having problems with the actual miners so perhaps that some of the problem being a one off algo. It's got some high diff too so perhaps thats a turnoff.

Hoping a team of miners drops by to kick off the blocks and keep them rolling.

you finally set DCR up correctly? the 2 days i mined on it nothing... then i noticed you where giving out not even half the full coin credit.

you had it on 3.12 DCR if im not mistaken?

[crackfoo]

you finally set DCR up correctly? the 2 days i mined on it nothing... then i noticed you where giving out not even half the full coin credit.

you had it on 3.12 DCR if im not mistaken?

DCR's getblocktemplate is broke so the frontend wasn't displaying it right. The pool takes the value from the generated block so it would be correct in the end.

[wonk]

I gave DCR a try with cgminer-3.7.2-decred but I'm not seeing any work:

Code:

 cgminer version 3.7.2 - Started: [2016-02-21 16:28:15]
--------------------------------------------------------------------------------
 (5s):0.000 (avg):0.000h/s | A:0  R:0  HW:0  WU:0.0/m
 ST: 0  SS: 0  NB: 1  LW: 3  GF: 0  RF: 0
 Connected to mine.zpool.ca diff 2.15G with stratum as user 1KQCPUvf3QBjUTwA8hwm
 Block: 0  Diff:0  Started: [16:28:15]  Best share: 0
--------------------------------------------------------------------------------
 [P]ool management [G]PU management [S]ettings [D]isplay options [Q]uit
 GPU 0:  39.0C 1409RPM |  0.000/ 0.000h/s | A:0 R:0 HW:0 WU:0.0/m I:14
--------------------------------------------------------------------------------

 [2016-02-21 16:28:11] Started cgminer 3.7.2
 [2016-02-21 16:28:11] Probing for an alive pool
 [2016-02-21 16:28:15] Pool 0 difficulty changed to 0.500000
 [2016-02-21 16:28:15] Network diff set to 0 (target 0)
 [2016-02-21 16:28:26] Waiting for work to be available from pools.
 [2016-02-21 16:28:28] Pool 0 http://mine.zpool.ca:5744 not responding!
 [2016-02-21 16:28:38] Stratum from pool 0 requested work restart
 [2016-02-21 16:28:40] Pool 0 http://mine.zpool.ca:5744 not responding!
 [2016-02-21 16:29:20] Pool 0 http://mine.zpool.ca:5744 not responding!
 [2016-02-21 16:29:30] Stratum from pool 0 requested work restart
 [2016-02-21 16:29:31] Pool 0 http://mine.zpool.ca:5744 not responding!

[semajjames]

I gave DCR a try with cgminer-3.7.2-decred but I'm not seeing any work:

Code:

 cgminer version 3.7.2 - Started: [2016-02-21 16:28:15]
--------------------------------------------------------------------------------
 (5s):0.000 (avg):0.000h/s | A:0  R:0  HW:0  WU:0.0/m
 ST: 0  SS: 0  NB: 1  LW: 3  GF: 0  RF: 0
 Connected to mine.zpool.ca diff 2.15G with stratum as user 1KQCPUvf3QBjUTwA8hwm
 Block: 0  Diff:0  Started: [16:28:15]  Best share: 0
--------------------------------------------------------------------------------
 [P]ool management [G]PU management [S]ettings [D]isplay options [Q]uit
 GPU 0:  39.0C 1409RPM |  0.000/ 0.000h/s | A:0 R:0 HW:0 WU:0.0/m I:14
--------------------------------------------------------------------------------

 [2016-02-21 16:28:11] Started cgminer 3.7.2
 [2016-02-21 16:28:11] Probing for an alive pool
 [2016-02-21 16:28:15] Pool 0 difficulty changed to 0.500000
 [2016-02-21 16:28:15] Network diff set to 0 (target 0)
 [2016-02-21 16:28:26] Waiting for work to be available from pools.
 [2016-02-21 16:28:28] Pool 0 http://mine.zpool.ca:5744 not responding!
 [2016-02-21 16:28:38] Stratum from pool 0 requested work restart
 [2016-02-21 16:28:40] Pool 0 http://mine.zpool.ca:5744 not responding!
 [2016-02-21 16:29:20] Pool 0 http://mine.zpool.ca:5744 not responding!
 [2016-02-21 16:29:30] Stratum from pool 0 requested work restart
 [2016-02-21 16:29:31] Pool 0 http://mine.zpool.ca:5744 not responding!

same as me i tried wolf0 cgminer decreed for a few mins and go NO hashes haven't looked again is that normal ??

[crackfoo]

I gave DCR a try with cgminer-3.7.2-decred but I'm not seeing any work:

Code:

 cgminer version 3.7.2 - Started: [2016-02-21 16:28:15]
--------------------------------------------------------------------------------
 (5s):0.000 (avg):0.000h/s | A:0  R:0  HW:0  WU:0.0/m
 ST: 0  SS: 0  NB: 1  LW: 3  GF: 0  RF: 0
 Connected to mine.zpool.ca diff 2.15G with stratum as user 1KQCPUvf3QBjUTwA8hwm
 Block: 0  Diff:0  Started: [16:28:15]  Best share: 0
--------------------------------------------------------------------------------
 [P]ool management [G]PU management [S]ettings [D]isplay options [Q]uit
 GPU 0:  39.0C 1409RPM |  0.000/ 0.000h/s | A:0 R:0 HW:0 WU:0.0/m I:14
--------------------------------------------------------------------------------

 [2016-02-21 16:28:11] Started cgminer 3.7.2
 [2016-02-21 16:28:11] Probing for an alive pool
 [2016-02-21 16:28:15] Pool 0 difficulty changed to 0.500000
 [2016-02-21 16:28:15] Network diff set to 0 (target 0)
 [2016-02-21 16:28:26] Waiting for work to be available from pools.
 [2016-02-21 16:28:28] Pool 0 http://mine.zpool.ca:5744 not responding!
 [2016-02-21 16:28:38] Stratum from pool 0 requested work restart
 [2016-02-21 16:28:40] Pool 0 http://mine.zpool.ca:5744 not responding!
 [2016-02-21 16:29:20] Pool 0 http://mine.zpool.ca:5744 not responding!
 [2016-02-21 16:29:30] Stratum from pool 0 requested work restart
 [2016-02-21 16:29:31] Pool 0 http://mine.zpool.ca:5744 not responding!

same as me i tried wolf0 cgminer decreed for a few mins and go NO hashes haven't looked again is that normal ??

Are you using stratum+tcp://mine.zpool.ca:5744 

[semajjames]

I gave DCR a try with cgminer-3.7.2-decred but I'm not seeing any work:

Code:

 cgminer version 3.7.2 - Started: [2016-02-21 16:28:15]
--------------------------------------------------------------------------------
 (5s):0.000 (avg):0.000h/s | A:0  R:0  HW:0  WU:0.0/m
 ST: 0  SS: 0  NB: 1  LW: 3  GF: 0  RF: 0
 Connected to mine.zpool.ca diff 2.15G with stratum as user 1KQCPUvf3QBjUTwA8hwm
 Block: 0  Diff:0  Started: [16:28:15]  Best share: 0
--------------------------------------------------------------------------------
 [P]ool management [G]PU management [S]ettings [D]isplay options [Q]uit
 GPU 0:  39.0C 1409RPM |  0.000/ 0.000h/s | A:0 R:0 HW:0 WU:0.0/m I:14
--------------------------------------------------------------------------------

 [2016-02-21 16:28:11] Started cgminer 3.7.2
 [2016-02-21 16:28:11] Probing for an alive pool
 [2016-02-21 16:28:15] Pool 0 difficulty changed to 0.500000
 [2016-02-21 16:28:15] Network diff set to 0 (target 0)
 [2016-02-21 16:28:26] Waiting for work to be available from pools.
 [2016-02-21 16:28:28] Pool 0 http://mine.zpool.ca:5744 not responding!
 [2016-02-21 16:28:38] Stratum from pool 0 requested work restart
 [2016-02-21 16:28:40] Pool 0 http://mine.zpool.ca:5744 not responding!
 [2016-02-21 16:29:20] Pool 0 http://mine.zpool.ca:5744 not responding!
 [2016-02-21 16:29:30] Stratum from pool 0 requested work restart
 [2016-02-21 16:29:31] Pool 0 http://mine.zpool.ca:5744 not responding!

same as me i tried wolf0 cgminer decreed for a few mins and go NO hashes haven't looked again is that normal ??

Are you using stratum+tcp://mine.zpool.ca:5744 

I used this and nothing more

cgminer.exe --blake256 -o stratum+tcp://mine.zpool.ca:5744 -u **************** -p xx

it generated blake256Hawaiigv1w256l4 .bin
but no hashing 

[AngryDwarf]

Regarding decred, I wouldn't be surprised if there aren't a few large private GPU farms mining it at the moment. The difficulty seems quite high. YiiMP pool has been running it for quite a while now, and they don't find blocks that quickly.
Not sure what to make of this new currency myself. They didn't think much about marketing calling it decred(ability) and choosing a symbol that makes it look like its going down!

[Arsenay]

where payments?  

[crackfoo]

where payments?  

Do ALL your miners have c=BTC in the password?

[crackfoo]

I gave DCR a try with cgminer-3.7.2-decred but I'm not seeing any work:

Code:

 cgminer version 3.7.2 - Started: [2016-02-21 16:28:15]
--------------------------------------------------------------------------------
 (5s):0.000 (avg):0.000h/s | A:0  R:0  HW:0  WU:0.0/m
 ST: 0  SS: 0  NB: 1  LW: 3  GF: 0  RF: 0
 Connected to mine.zpool.ca diff 2.15G with stratum as user 1KQCPUvf3QBjUTwA8hwm
 Block: 0  Diff:0  Started: [16:28:15]  Best share: 0
--------------------------------------------------------------------------------
 [P]ool management [G]PU management [S]ettings [D]isplay options [Q]uit
 GPU 0:  39.0C 1409RPM |  0.000/ 0.000h/s | A:0 R:0 HW:0 WU:0.0/m I:14
--------------------------------------------------------------------------------

 [2016-02-21 16:28:11] Started cgminer 3.7.2
 [2016-02-21 16:28:11] Probing for an alive pool
 [2016-02-21 16:28:15] Pool 0 difficulty changed to 0.500000
 [2016-02-21 16:28:15] Network diff set to 0 (target 0)
 [2016-02-21 16:28:26] Waiting for work to be available from pools.
 [2016-02-21 16:28:28] Pool 0 http://mine.zpool.ca:5744 not responding!
 [2016-02-21 16:28:38] Stratum from pool 0 requested work restart
 [2016-02-21 16:28:40] Pool 0 http://mine.zpool.ca:5744 not responding!
 [2016-02-21 16:29:20] Pool 0 http://mine.zpool.ca:5744 not responding!
 [2016-02-21 16:29:30] Stratum from pool 0 requested work restart
 [2016-02-21 16:29:31] Pool 0 http://mine.zpool.ca:5744 not responding!

AFAIK, only this miners has stratum support so far:

https://github.com/tpruvot/ccminer

[Arsenay]

where payments?  

Do ALL your miners have c=BTC in the password?

yes

Code:

export GPU_MAX_ALLOC_PERCENT=100
export GPU_MAX_HEAP_SIZE=100
export GPU_USE_SYNC_OBJECTS=1


./sgminer -k neoscrypt -o stratum+tcp://mine.zpool.ca:4233 -u 1GH1CBgddk5S1sQGAhxy9Pzzwi9BSTchxT -p c=BTC  \
--intensity 13,13  -w 32 --thread-concurrency 4000,8192 -g 1,1 --lookup-gap 2 \
--auto-fan --temp-target 69,70 \
--gpu-memclock 1250,1250 --gpu-engine 840,860  

-----------------------
- ~0.0025 btc , bad luck  ))

[Nanit]

crackfoo, And how to mining on the CPU in your pool?   i7

[AngryDwarf]

crackfoo, And how to mining on the CPU in your pool?   i7

This previous post might help.

https://bitcointalk.org/index.php?topic=1260863.msg13658867#msg13658867