SEGWIT LTC.TBDICE.ORG 0.5% fee SOLO MM LTC/DGE POOL 3K+ LTC/7K+ DGE blks solved

[citronick]

Hi loshia - Can I use the new LTC address format, the one that starts with "M" - thanks

[1714956076]

1714956076

[1714956076]

1714956076

[1714956076]

1714956076

[1714956076]

1714956076

[1714956076]

1714956076

[1714956076]

1714956076

[loshia1974]

Hi loshia - Can I use the new LTC address format, the one that starts with "M" - thanks

Hi,
No for the moment sorry. Pool and LTC daemon needs to be updated...
I am working on SPLNS LTC + MM DOGE pool.
Like this one  (the original CK BTC pool)
https://bitcointalk.org/index.php?topic=1876330.0
When i finish it i will update solo also
Best
Loshia

[carrylicious]

Hi Loshia, I just bought a Antrouter R1 LTC, can you help me, I have no idea how to get into the config because I know the password feel is getting truncated therefore not receiving the doge address and other parameters correctly.

[loshia1974]

Hi Loshia, I just bought a Antrouter R1 LTC, can you help me, I have no idea how to get into the config because I know the password feel is getting truncated therefore not receiving the doge address and other parameters correctly.

Hi,
Here is something like how-to

https://bitcointalk.org/index.php?topic=1290219.msg20414675#msg20414675

If you are having difficulties doing it please prepare PC with Team viewer which can access your miner via ssh. I will do rest for you
Best
Loshia

[carrylicious]

Hi Loshia, I just bought a Antrouter R1 LTC, can you help me, I have no idea how to get into the config because I know the password feel is getting truncated therefore not receiving the doge address and other parameters correctly.

Hi,
Here is something like how-to

https://bitcointalk.org/index.php?topic=1290219.msg20414675#msg20414675

If you are having difficulties doing it please prepare PC with Team viewer which can access your miner via ssh. I will do rest for you
Best
Loshia

I am not sure how to mess with SCP or how to access the ssh, but I do have teamviewer on my PC! Can you help me? Thanks

[loshia1974]

Yes I can PM me your TeamViewer  ID and PASS. What is you TimeZone

I am UTC+3?

[dwood443]

Hello. I'm fairly new to mining but have setup my miner to use TBDICE and when I look at my user it shows up as a POOL user. Shouldn't it say SELF?
Here's my script
bfgminer.exe --scrypt -o stratum+tcp://tbdice.org:13333 -u MAazxdg6pP8p879FEHgUQfFTah3wWPvtHV -p diff_128   -S MLD:all --set MLD:clock=796

Thanks for any help

[dwood443]

Hello. I'm fairly new to mining but have setup my miner to use TBDICE and when I look at my user it shows up as a POOL user. Shouldn't it say SELF?
Here's my script
bfgminer.exe --scrypt -o stratum+tcp://tbdice.org:13333 -u MAazxdg6pP8p879FEHgUQfFTah3wWPvtHV -p diff_128   -S MLD:all --set MLD:clock=796

Thanks for any help

Never mind, once I added a doge address it changed to SELF

[loshia1974]

I just have received a call from pool server hosting provider. There is a scheduled maintenance for today. Unfortunately they were not able to tell me when it will happen exactly. Representative assured me that expected service interruption will be no more than 15 minutes. Make sure your backup pools are configured and allive.
Best
Loshia
PS: Maintenance just started......And anded.. All is good
Mine on:)

[corgalore]

Just added a miner to ltc.tbdice pool, but I noticed the welcome message mentioned 'TestNet'. Did the text just never get updated or what's the deal with that?

Tried both of these addresses and they both give a welcome message saying TestNet:

stratum+tcp://tbdice.org:13333 or stratum+tcp://tbdice.org:13334

The miner is accepting and processing blocks okay, but I don't see my address showing up under Users or Workers.

I'm just trying out the pool with a small Moonlander 2, so maybe it's not hashing fast enough to show up??

Any changes I need to make to config?

[loshia1974]

Hi,
'TestNet' is a typo left over. I will remove it on next pool restart. You can ignore it, You are mining on on MAIN net for sure.
About your miner not showing up in stats please PM me your LTC address to check...One reason might be that your hash rate is too low and you need to specify low start diff inside your password
LIKE this:
-------------
The pool supports difficulty setting inside your password. The format is: diff_xxxxxxx:(DOGE address), where xxxxxxx can be any positive integer value.

try with diff_16 and recheck your stats
-------------
Best
Loshia

Just added a miner to ltc.tbdice pool, but I noticed the welcome message mentioned 'TestNet'. Did the text just never get updated or what's the deal with that?

Tried both of these addresses and they both give a welcome message saying TestNet:

stratum+tcp://tbdice.org:13333 or stratum+tcp://tbdice.org:13334

The miner is accepting and processing blocks okay, but I don't see my address showing up under Users or Workers.

I'm just trying out the pool with a small Moonlander 2, so maybe it's not hashing fast enough to show up??

Any changes I need to make to config?

[loshia1974]

Pool is under dos. I am working to resolve it
Sorry folks

[loshia1974]

I am back from data center. It was HDD failure + DDOS at the same time. Everything was restored from backup image to new HDD. Total downtime was about 2 hours. All is good and running. Pool life stats were lost (Pool last block and Pool Rnd Time - nothing to worry about) but as soon as we find our first block they will look good again.
Mine On
Loshia
Pool OP  

[loshia1974]

And life stats are back normal after two last blocks
[2018-04-04 04:05:19.650] Solved and confirmed block 1397248 by LeaN....exoblockE1543
[2018-04-04 04:05:19.679] Solved and confirmed AUX block 2163491 by LeaN...exoblockE1543

Best
Loshia

[mackb-1]

I was solo mining using an address that started with M and found block 1398528. On the statistics page the address didn't appear red, so I thought everything was great until after the block was found. Can you assist with this? Thank you!

[loshia1974]

I was solo mining using an address that started with M and found block 1398528. On the statistics page the address didn't appear red, so I thought everything was great until after the block was found. Can you assist with this? Thank you!

Hi,
Just a couple of posts above
https://bitcointalk.org/index.php?topic=1290219.msg31405831#msg31405831

I pointed out that M addresses are not ok. Pool home page does not say they are ok also. It is true that statistics page does not sohow them in red -my bad. Any way I am with limited internet connectivity on vacation for 10 days. I can not resolve your issue until I am back. So please be patient and wait until 15 of April.
Best
Loshia

[mackb-1]

I was solo mining using an address that started with M and found block 1398528. On the statistics page the address didn't appear red, so I thought everything was great until after the block was found. Can you assist with this? Thank you!

Hi,
Just a couple of posts above
https://bitcointalk.org/index.php?topic=1290219.msg31405831#msg31405831

I pointed out that M addresses are not ok. Pool home page does not say they are ok also. It is true that statistics page does not sohow them in red -my bad. Any way I am with limited internet connectivity on vacation for 10 days. I can not resolve your issue until I am back. So please be patient and wait until 15 of April.
Best
Loshia

Thank you very much. Have a nice vacation!

[philipma1957]

Pool is down

[loshia1974]

I am aware . I called data center. I will know the situation and will inform you what  happened. The issue will. Be resolved within couple of hours. Sorry folks

[loshia1974]

Update
Pool is up and running. Someone does not like pool... any way
Mine on
Ps: Same attack will not work again