ethminer-0.9.41-genoil-1.1

[Eyedol-X]

1.0.8 is out.

- work timeout (fails over when working on the same block too long)
- send stale shares (potential poolside sharerate increase up to 1%)
- shorter log output (mostly fits 1 line on fixed-width win console)
- counting shares [A0+0:R0+0:F0] (A= accepted+accepted stales, R=rejected+rejected stales, F= fails)
- longer default hashrate update interval when using stratum
- cleaned up loads of Linux build warnings. not all I'm afraid.
- fixed --opencl-device bug
- i may have accidentally fixed the DAG switch crashes. let me know if it still crashes on next epoch change.

what's up for 1.0.9?

- investigate GPU load drops.
- Pascal support

Of course i want dual-mining and on-GPU DAG building too, but I don't have much time...

Switched to 1.0.8 today, love the cleaner hash reporting and share counting. Thanks for this.

Look forward to the future wish list items of dual-mining and on-GPU DAG

[1715533759]

1715533759

[crazyearner]

Thanks for the supported updates here. About to download me a kickass 1.0.8 and trial it out compare with Claymore's Dual Ethereum+Decred GPU Miner see if much improvments.

Maybe visual idea too for future now you put n accepted rejected stale etc maybe to have a screen that updates like with shares and has 1 hash speed per gpu total speed than loads of scrolling and zoming down n stuff. or option to hide all status and just have like accepted rejected total share rate for miner etc Bit like the layout of BFG and cgminer has
One more question is their options for intensity on this to set intensity on how hard card works etc ?

[restless]

Genoil, any hope to implement on-card DAG creation?
Thats the single huge + for Claymore's miner

And 1 more "feature" request - what about taking failover pools/settings from config file?

[tolazy]

Does this miner support 750Ti?  If yes, what's the correct config to run it?
Sorry if this question was asked earlier

Only on linux, and the speed is slow. Around 4mhash. You bether mine something else.

when my server was up i got 10Mhash on my 660ti why is 750ti worse?

[restless]

Speed on expanse is 7MH, but DAG size hurts Nv cards badly

[Amph]

Speed on expanse is 7MH, but DAG size hurts Nv cards badly

7mh what gpu?

the new drivers are worth updating? tallking about 365

[Genoil]

Genoil, any hope to implement on-card DAG creation?
Thats the single huge + for Claymore's miner

And 1 more "feature" request - what about taking failover pools/settings from config file?

There's always hope 

- on-gpu dag generation
- dual mining
- config file
- mixed platform mining (opencl + cuda, nvidia + amd)
- per gpu hashrate display
- rest API
- overclocking and temperature control
- windows console colors

[Amph]

new drivers plus 1.0.8, only two 970, i'm selling my gpu because of the new one, i can still sell them at 285 euro apparently, so better do it now before they are worth two penny

the average hash is increased a bit, previously was 43.5 now with everything on the last update i've reached almost 44.5

[navydude]

Anyone running 380x cards? If so what drivers and settings are working best? I would love to get this miner up and rolling. Thanks in advance.

[moaddip]

1.0.8, + 4x 970 CPU loaded on 80%, and a miner does not work, very slowly.

1-2-3x    970   works fine.

cpu amd 2 cores, nvidia driver last.

 

what is missing?

[crazyearner]

Loving the updates 1.0.8 seems to of increased my speeds not sure why but it has done. Used same settings as before was hitting maybe 20MH per 280x card now gained extra 2MH per card and also use to use dual miner and seems its preforming better than dual now so back using etherminer until something else improves or gets better. If ethminer cracks dual mining then it would be good to have it open to other crypto too same alog as the other coin that dual miner uses but more coins etc

[Genoil]

1.0.8, + 4x 970 CPU loaded on 80%, and a miner does not work, very slowly.

1-2-3x    970   works fine.

cpu amd 2 cores, nvidia driver last.

 

what is missing?

how much RAM you got there and which OS? btw i'm probably not the most experienced here with just 1 970. there are others here who've got big nvidia rigs

[ourepts]

Curiously, when mining on ethermine, is there a warm up period before you start making what you should for your submitted shares? Like you have to be on the pool for two hours before you earn your optimal income rate.

[adamvp]

Does in support dwarfpool stratum now?

[crazyearner]

Does in support dwarfpool stratum now?

Always has done you need to set your miner up correctly and use correct ports and proxy if your using stratum than getwork http://dwarfpool.com/eth scroll down to where says getting started and read how to create config above on right hand side you will see Stratum-port: 8008 and list of servers to use make config up and go from their if cant make config just follow instructions on their site how to do everything.

[Genoil]

Ok let's say I did NOT just get access to a Win7-x64 box with NO GTX1080 and CUDA 8.0RC NOT installed and I didn't succesfully build my 1.0.8 ethminer fork on it.

I didn't clock 19.6MH in default benchmark mode at ~140W and it sure as hell didn't clock a whopping 650KH/s in actual mining mode against the current DAG.

This card trashes TLB like GM107  

But...there is hope. I can't disclose what I just heard from my source because the word 'might' in his statement leaves me too uncertain. But if it's true everything simply changes.

[adamvp]

Code:

ethminer.exe -C -S eth-eu.dwarfpool.com:80/0Myxa2541adressss/worker

doesn't work

[Genoil]

Code:

ethminer.exe -C -S eth-eu.dwarfpool.com:80/0Myxa2541adressss/worker

doesn't work

no it doesn't. my fork doesn't support dwarf stratum. a. their stratum is not stratum and b. their faq says my stratum is buggy while their implementation is simply out of spec.

i will support it if i get paid to do it 

[Longsnowsm]

Ok let's say I did NOT just get access to a Win7-x64 box with NO GTX1080 and CUDA 8.0RC NOT installed and I didn't succesfully build my 1.0.8 ethminer fork on it.

I didn't clock 19.6MH in default benchmark mode at ~140W and it sure as hell didn't clock a whopping 650KH/s in actual mining mode against the current DAG.

This card trashes TLB like GM107  

But...there is hope. I can't disclose what I just heard from my source because the word 'might' in his statement leaves me too uncertain. But if it's true everything simply changes.

Everything simply changes for Maxwell cards too like the 750ti? :-)  And when would this "might" possibly happen?  :-D  I am just glad your NOT doing research with NO GTX1080... Just wouldn't be prudent! LOL

[Genoil]

Ok let's say I did NOT just get access to a Win7-x64 box with NO GTX1080 and CUDA 8.0RC NOT installed and I didn't succesfully build my 1.0.8 ethminer fork on it.

I didn't clock 19.6MH in default benchmark mode at ~140W and it sure as hell didn't clock a whopping 650KH/s in actual mining mode against the current DAG.

This card trashes TLB like GM107  

But...there is hope. I can't disclose what I just heard from my source because the word 'might' in his statement leaves me too uncertain. But if it's true everything simply changes.

Everything simply changes for Maxwell cards too like the 750ti? :-)  And when would this "might" possibly happen?  :-D  I am just glad your NOT doing research with NO GTX1080... Just wouldn't be prudent! LOL

Apparently Pascal supports large TLB page sizes. I don't know if Maxwell does. It's not something Nvidia can simply enable in CUDA 8. In Linux perhaps, Windows needs a new WDDM release.