⚡[ANN]⚡ ▐░Espers [ESP]░▌▐░PoW/PoS░▌▐░HMQ1725 Algo░▌ ▐░New Features░▌

[OhGodAGirl]

someone can compile for windows

Miners have already been compiled for windows

Here is a direct download URL for the windows binaries of the older miner:  >>>LINK HERE<<<

and the new one is >>>HERE<<<

I tested sgminer_build_hmq1725_b4 on Win7 64bit.
Works without any problems for me.

7950 ~ 1,3 MHs
7850 ~ 880 KHs
R7 370 ~ 1,1 MHs

On Win 8.1 with a 7850 the miner crashes. Don´t know why but will a have a look tomorrow.

Those numbers are a bit low. I'm not at my box right now, but once I am I'll take a look and see if we can boost that up. You should be getting at least 2 MH/s. I will also post a walkthrough for everyone on how to set it up. Check back in 12 hours folks.

I'll be really glad if you post it
i get 360kH/s with my R9 270, are my numbers low too? 

...and I thought these stats are good 

If you post the walkthrough I´ll try it.
I'm curious about it.

Sorry guys, I mistyped. Just referenced with Wolf's machine now - he's getting 2.74 Mh/s on a 280X, and the 7950 is pulling in 2.4 Mh/s.

Still a little low, but not terrible. I'll write up a guide and PM you both, if you'd like, to notify you.

Like I said - not at my machine to go through the steps, can only access SSH + this forum, but once I am tomorrow I'll do a step-by-step. Potentially with screenshots. Woo, screenshots!

[1714267110]

1714267110

[Vin]

Yes, would be nice.

With the 7950 I got 1,9 Mhs for a short time. But not stable.
GPU get sick/dead after a few mins @ I 18 and stock stats.

[Nicolasbonza]

someone can compile for windows

Miners have already been compiled for windows

Here is a direct download URL for the windows binaries of the older miner:  >>>LINK HERE<<<

and the new one is >>>HERE<<<

I tested sgminer_build_hmq1725_b4 on Win7 64bit.
Works without any problems for me.

7950 ~ 1,3 MHs
7850 ~ 880 KHs
R7 370 ~ 1,1 MHs

On Win 8.1 with a 7850 the miner crashes. Don´t know why but will a have a look tomorrow.

Those numbers are a bit low. I'm not at my box right now, but once I am I'll take a look and see if we can boost that up. You should be getting at least 2 MH/s. I will also post a walkthrough for everyone on how to set it up. Check back in 12 hours folks.

I'll be really glad if you post it
i get 360kH/s with my R9 270, are my numbers low too? 

...and I thought these stats are good 

If you post the walkthrough I´ll try it.
I'm curious about it.

Sorry guys, I mistyped. Just referenced with Wolf's machine now - he's getting 2.74 Mh/s on a 280X, and the 7950 is pulling in 2.4 Mh/s.

Still a little low, but not terrible. I'll write up a guide and PM you both, if you'd like, to notify you.

Like I said - not at my machine to go through the steps, can only access SSH + this forum, but once I am tomorrow I'll do a step-by-step. Potentially with screenshots. Woo, screenshots!

i'm trying to work with the wolf miner on Ubuntu as you can see in my later posts without much success,
now i realized that if i increase the Intensity it get better kH/s

my .BAT using the older miner:
sgminer.exe --kernel hmq1725 -o stratum+tcp://esp.suprnova.cc:3451 -u nicolasbonza.3 -p x -I 17

with the intensity 15 i was getting about 360kH/s, now i'm getting 385 with the Intensity 17
Does this damage the card or something like this?

[OhGodAGirl]

i'm trying to work with the wolf miner on Ubuntu as you can see in my later posts without much success,
now i realized that if i increase the Intensity it get better kH/s

my .BAT using the older miner:
sgminer.exe --kernel hmq1725 -o stratum+tcp://esp.suprnova.cc:3451 -u nicolasbonza.3 -p x -I 17

with the intensity 15 i was getting about 360kH/s, now i'm getting 385 with the Intensity 17
Does this damage the card or something like this?

All it's going to do is heat up your GPU - heat is not a danger. It might throttle it, but if it reaches a dangerous temperature, it will turn off.

Let me briefly explain what intensity it is - it's the size of the work being submitted to the GPU in one go. The higher the number, the bigger the work load. Intensity isn't a 'go big or go home' number. You want to fiddle around with it to find the optimal balance between performance and hash rate. Too high - 32 - might give you a wonderful rate, but it will start throwing errors. Too low? You'll be stuck with a horrible rate, but you will get a stable machine.

What core clock and mem clock are you running at? Try intensity 19, 20, and 25 - let me know what rate you get at each. Don't be afraid to experiment! Ctrl + C should shut it down if you get stressed, but otherwise a reset of your machine and you'll be all good (if it hard locks).

[Nicolasbonza]

i5 4670 with 16gb of ram (kingston hyperx 1600mhz 4x4),b85m-e/br mobo and my r9 270 saphire
and i'm running the cpu miner too :v
edit: Wow i put 20 and the hashrate went to 580 for a second

[E1337]

Hi devs 
Any intresting features in development?

[OhGodAGirl]

i5 4670 with 16gb of ram (kingston hyperx 1600mhz 4x4),b85m-e/br mobo and my r9 270 saphire
and i'm running the cpu miner too :v

Don't use the CPU miner AND the GPU miner at the same time! There is no point. GPU is a thousand times better - CPU is a last resort, for folks who have integrated cards, for example.

Just run the GPU.

[Nicolasbonza]

i5 4670 with 16gb of ram (kingston hyperx 1600mhz 4x4),b85m-e/br mobo and my r9 270 saphire
and i'm running the cpu miner too :v

Don't use the CPU miner AND the GPU miner at the same time! There is no point. GPU is a thousand times better - CPU is a last resort, for folks who have integrated cards, for example.

Just run the GPU.

With both working i can get about 480~500kh/s, it's more than i could get with only the gpu
edit: If the Wolf0's miner work here as it promises with 7x the current hashrate on linux, i would stop mining with cpu

[OhGodAGirl]

i5 4670 with 16gb of ram (kingston hyperx 1600mhz 4x4),b85m-e/br mobo and my r9 270 saphire
and i'm running the cpu miner too :v

Don't use the CPU miner AND the GPU miner at the same time! There is no point. GPU is a thousand times better - CPU is a last resort, for folks who have integrated cards, for example.

Just run the GPU.

With both working i can get about 480~500kh/s, it's more than i could get with only the gpu

Turn off the CPU one - run the GPU at intensity 25, tell me what you get.

[Nicolasbonza]

i5 4670 with 16gb of ram (kingston hyperx 1600mhz 4x4),b85m-e/br mobo and my r9 270 saphire
and i'm running the cpu miner too :v

Don't use the CPU miner AND the GPU miner at the same time! There is no point. GPU is a thousand times better - CPU is a last resort, for folks who have integrated cards, for example.

Just run the GPU.

With both working i can get about 480~500kh/s, it's more than i could get with only the gpu

Turn off the CPU one - run the GPU at intensity 25, tell me what you get.

it gave me a blue screen :v
so i think it's more profitable to work with both cpu and gpu, because i get a more stable hashrate
edit: more than 20 intensity was not good :v
i think 16 intensity is going well
it is now giving me a stable 390kH/s

[OhGodAGirl]

i5 4670 with 16gb of ram (kingston hyperx 1600mhz 4x4),b85m-e/br mobo and my r9 270 saphire
and i'm running the cpu miner too :v

Don't use the CPU miner AND the GPU miner at the same time! There is no point. GPU is a thousand times better - CPU is a last resort, for folks who have integrated cards, for example.

Just run the GPU.

With both working i can get about 480~500kh/s, it's more than i could get with only the gpu

Turn off the CPU one - run the GPU at intensity 25, tell me what you get.

it gave me a blue screen :v
so i think it's more profitable to work with both cpu and gpu, because i get a more stable hashrate

Lemme summon the hound to take over. I have to head off to bed.

[Nicolasbonza]

i5 4670 with 16gb of ram (kingston hyperx 1600mhz 4x4),b85m-e/br mobo and my r9 270 saphire
and i'm running the cpu miner too :v

Don't use the CPU miner AND the GPU miner at the same time! There is no point. GPU is a thousand times better - CPU is a last resort, for folks who have integrated cards, for example.

Just run the GPU.

With both working i can get about 480~500kh/s, it's more than i could get with only the gpu

Turn off the CPU one - run the GPU at intensity 25, tell me what you get.

it gave me a blue screen :v
so i think it's more profitable to work with both cpu and gpu, because i get a more stable hashrate

Lemme summon the hound to take over. I have to head off to bed.

Intensity - set it to something like 16, then slowly raise it.

more than 20 intensity was not good :v
i think 16 intensity is going well
it is now giving me a stable 390kH/s

Tomorrow i'll try to use the wolf0's miner on Ubuntu again, with not much hope
edit: with 15 intensity, my gpu temperature was 58 degrees, with 16 it's 58~60 (almost the same)

[SHP-YTC]

someone can compile for windows

Miners have already been compiled for windows

Here is a direct download URL for the windows binaries of the older miner:  >>>LINK HERE<<<

and the new one is >>>HERE<<<

I tested sgminer_build_hmq1725_b4 on Win7 64bit.
Works without any problems for me.

7950 ~ 1,3 MHs
7850 ~ 880 KHs
R7 370 ~ 1,1 MHs

On Win 8.1 with a 7850 the miner crashes. Don´t know why but will a have a look tomorrow.

I finally finished my new website, specifically for ESP mining hardware comparison.

Please check it out : http://esp-setup.weebly.com/


If you're interested to add your setup, you'll be rewarded with 5.000 ESP.
You can use the contact form on the site or this Google Spreadsheet:

https://docs.google.com/spreadsheets/d/1KQKkW-j8VI_ag4Sr4ZvzkCXFsHDbrn78VY4Kvjdfm2k/edit#gid=0
 
Please share and repost if you like this idea

Best regards

[lucky80]

Strange feeling .....ccminer will come today ....LOL

[ErikW79]

During compile it writes that file ../src/Makefile.inc not found ... even if I had it pasted there. Anyone lucky with this?

[ErikW79]

Espers could be added for trade: https://c-cex.com/?id=vote
current pos 254

[Nicolasbonza]

someone can compile for windows

Miners have already been compiled for windows

Here is a direct download URL for the windows binaries of the older miner:  >>>LINK HERE<<<

and the new one is >>>HERE<<<

I tested sgminer_build_hmq1725_b4 on Win7 64bit.
Works without any problems for me.

7950 ~ 1,3 MHs
7850 ~ 880 KHs
R7 370 ~ 1,1 MHs

On Win 8.1 with a 7850 the miner crashes. Don´t know why but will a have a look tomorrow.

I finally finished my new website, specifically for ESP mining hardware comparison.

Please check it out : http://esp-setup.weebly.com/


If you're interested to add your setup, you'll be rewarded with 5.000 ESP.
You can use the contact form on the site or this Google Spreadsheet:

https://docs.google.com/spreadsheets/d/1KQKkW-j8VI_ag4Sr4ZvzkCXFsHDbrn78VY4Kvjdfm2k/edit#gid=0
 
Please share and repost if you like this idea

Best regards

Can you add my configuration?

Hardware: Sapphire ATI Radeon R9 270 2GB DDR5 256B 11220-00-20G (1x)
.BAT file configuration: sgminer.exe --kernel hmq1725 -o stratum+tcp://esp.suprnova.cc:3451 -u nicolasbonza.3 -p x -I 16
Hashrate: 392kH/s
Software: sgminer-5-1-1-hmq1725 on Windows 10 Pro 64 bits

Hardware: Intel core I5-4670 (1x)
.BAT file configuration: cpuminer -a hmq1725 -o stratum+tcp://esp.suprnova.cc:3451 -u nicolasbonza.2 -p x -q
Hashrate: 100kH/s
Software: cpuminer-hmq1725-win64 on Windows 10 Pro 64 bits

Edit: i added my configuration on this link: https://docs.google.com/spreadsheets/d/1KQKkW-j8VI_ag4Sr4ZvzkCXFsHDbrn78VY4Kvjdfm2k/edit#gid=0

[xtrembash]

someone can compile for windows

Miners have already been compiled for windows

Here is a direct download URL for the windows binaries of the older miner:  >>>LINK HERE<<<

and the new one is >>>HERE<<<

I tested sgminer_build_hmq1725_b4 on Win7 64bit.
Works without any problems for me.

7950 ~ 1,3 MHs
7850 ~ 880 KHs
R7 370 ~ 1,1 MHs

On Win 8.1 with a 7850 the miner crashes. Don´t know why but will a have a look tomorrow.

how can you use sgminer_build_hmq1725_b4 on win 7 without problem?!
troll ?!
sgminer optimized wolf only works on ubuntu for some guys
there is no  wolf sgminer working for public  atm ...

[SHP-YTC]

someone can compile for windows

Miners have already been compiled for windows

Here is a direct download URL for the windows binaries of the older miner:  >>>LINK HERE<<<

and the new one is >>>HERE<<<

I tested sgminer_build_hmq1725_b4 on Win7 64bit.
Works without any problems for me.

7950 ~ 1,3 MHs
7850 ~ 880 KHs
R7 370 ~ 1,1 MHs

On Win 8.1 with a 7850 the miner crashes. Don´t know why but will a have a look tomorrow.

I finally finished my new website, specifically for ESP mining hardware comparison.

Please check it out : http://esp-setup.weebly.com/


If you're interested to add your setup, you'll be rewarded with 5.000 ESP.
You can use the contact form on the site or this Google Spreadsheet:

https://docs.google.com/spreadsheets/d/1KQKkW-j8VI_ag4Sr4ZvzkCXFsHDbrn78VY4Kvjdfm2k/edit#gid=0
 
Please share and repost if you like this idea

Best regards

Can you add my configuration?

Hardware: Sapphire ATI Radeon R9 270 2GB DDR5 256B 11220-00-20G (1x)
.BAT file configuration: sgminer.exe --kernel hmq1725 -o stratum+tcp://esp.suprnova.cc:3451 -u nicolasbonza.3 -p x -I 16
Hashrate: 392kH/s
Software: sgminer-5-1-1-hmq1725 on Windows 10 Pro 64 bits

Hardware: Intel core I5-4670 (1x)
.BAT file configuration: cpuminer -a hmq1725 -o stratum+tcp://esp.suprnova.cc:3451 -u nicolasbonza.2 -p x -q
Hashrate: 100kH/s
Software: cpuminer-hmq1725-win64 on Windows 10 Pro 64 bits

Edit: i added my configuration on this link: https://docs.google.com/spreadsheets/d/1KQKkW-j8VI_ag4Sr4ZvzkCXFsHDbrn78VY4Kvjdfm2k/edit#gid=0

Thanks a lot
Post your ESP adress so I can send you your 10.000 ESP-

[Nicolasbonza]

someone can compile for windows

Miners have already been compiled for windows

Here is a direct download URL for the windows binaries of the older miner:  >>>LINK HERE<<<

and the new one is >>>HERE<<<

I tested sgminer_build_hmq1725_b4 on Win7 64bit.
Works without any problems for me.

7950 ~ 1,3 MHs
7850 ~ 880 KHs
R7 370 ~ 1,1 MHs

On Win 8.1 with a 7850 the miner crashes. Don´t know why but will a have a look tomorrow.

I finally finished my new website, specifically for ESP mining hardware comparison.

Please check it out : http://esp-setup.weebly.com/


If you're interested to add your setup, you'll be rewarded with 5.000 ESP.
You can use the contact form on the site or this Google Spreadsheet:

https://docs.google.com/spreadsheets/d/1KQKkW-j8VI_ag4Sr4ZvzkCXFsHDbrn78VY4Kvjdfm2k/edit#gid=0
 
Please share and repost if you like this idea

Best regards

Can you add my configuration?

Hardware: Sapphire ATI Radeon R9 270 2GB DDR5 256B 11220-00-20G (1x)
.BAT file configuration: sgminer.exe --kernel hmq1725 -o stratum+tcp://esp.suprnova.cc:3451 -u nicolasbonza.3 -p x -I 16
Hashrate: 392kH/s
Software: sgminer-5-1-1-hmq1725 on Windows 10 Pro 64 bits

Hardware: Intel core I5-4670 (1x)
.BAT file configuration: cpuminer -a hmq1725 -o stratum+tcp://esp.suprnova.cc:3451 -u nicolasbonza.2 -p x -q
Hashrate: 100kH/s
Software: cpuminer-hmq1725-win64 on Windows 10 Pro 64 bits

Edit: i added my configuration on this link: https://docs.google.com/spreadsheets/d/1KQKkW-j8VI_ag4Sr4ZvzkCXFsHDbrn78VY4Kvjdfm2k/edit#gid=0

Thanks a lot
Post your ESP adress so I can send you your 10.000 ESP-

I put another config with the I5-4670 but with different software miner, it's gaving me about 140kH/s, so i put it on the link too
Adress: EeoFKkVD5yDDiZq68sGebRxX5SHvEKhsr2
i'll put more info on that link with more cpu's later too