OhGodAGirl
Full Member
Offline
Activity: 199
Merit: 108
Look, I'm really not that interesting. Promise.
|
|
July 10, 2016, 11:32:03 PM |
|
someone can compile for windows
Miners have already been compiled for windows Here is a direct download URL for the windows binaries of the older miner: >>>LINK HERE<<<and the new one is >>>HERE<<<I tested sgminer_build_hmq1725_b4 on Win7 64bit. Works without any problems for me. 7950 ~ 1,3 MHs 7850 ~ 880 KHs R7 370 ~ 1,1 MHs On Win 8.1 with a 7850 the miner crashes. Don´t know why but will a have a look tomorrow. Those numbers are a bit low. I'm not at my box right now, but once I am I'll take a look and see if we can boost that up. You should be getting at least 2 MH/s. I will also post a walkthrough for everyone on how to set it up. Check back in 12 hours folks. I'll be really glad if you post it i get 360kH/s with my R9 270, are my numbers low too? ...and I thought these stats are good If you post the walkthrough I´ll try it. I'm curious about it. Sorry guys, I mistyped. Just referenced with Wolf's machine now - he's getting 2.74 Mh/s on a 280X, and the 7950 is pulling in 2.4 Mh/s. Still a little low, but not terrible. I'll write up a guide and PM you both, if you'd like, to notify you. Like I said - not at my machine to go through the steps, can only access SSH + this forum, but once I am tomorrow I'll do a step-by-step. Potentially with screenshots. Woo, screenshots!
|
|
|
|
|
|
|
|
|
Bitcoin mining is now a specialized and very risky industry, just like gold mining. Amateur miners are unlikely to make much money, and may even lose money. Bitcoin is much more than just mining, though!
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
|
|
|
Vin
Legendary
Offline
Activity: 1166
Merit: 1015
|
|
July 10, 2016, 11:45:43 PM |
|
Yes, would be nice.
With the 7950 I got 1,9 Mhs for a short time. But not stable. GPU get sick/dead after a few mins @ I 18 and stock stats.
|
|
|
|
Nicolasbonza
Member
Offline
Activity: 112
Merit: 10
|
|
July 10, 2016, 11:59:34 PM |
|
someone can compile for windows
Miners have already been compiled for windows Here is a direct download URL for the windows binaries of the older miner: >>>LINK HERE<<<and the new one is >>>HERE<<<I tested sgminer_build_hmq1725_b4 on Win7 64bit. Works without any problems for me. 7950 ~ 1,3 MHs 7850 ~ 880 KHs R7 370 ~ 1,1 MHs On Win 8.1 with a 7850 the miner crashes. Don´t know why but will a have a look tomorrow. Those numbers are a bit low. I'm not at my box right now, but once I am I'll take a look and see if we can boost that up. You should be getting at least 2 MH/s. I will also post a walkthrough for everyone on how to set it up. Check back in 12 hours folks. I'll be really glad if you post it i get 360kH/s with my R9 270, are my numbers low too? ...and I thought these stats are good If you post the walkthrough I´ll try it. I'm curious about it. Sorry guys, I mistyped. Just referenced with Wolf's machine now - he's getting 2.74 Mh/s on a 280X, and the 7950 is pulling in 2.4 Mh/s. Still a little low, but not terrible. I'll write up a guide and PM you both, if you'd like, to notify you. Like I said - not at my machine to go through the steps, can only access SSH + this forum, but once I am tomorrow I'll do a step-by-step. Potentially with screenshots. Woo, screenshots! i'm trying to work with the wolf miner on Ubuntu as you can see in my later posts without much success, now i realized that if i increase the Intensity it get better kH/s my .BAT using the older miner: sgminer.exe --kernel hmq1725 -o stratum+tcp://esp.suprnova.cc:3451 -u nicolasbonza.3 -p x -I 17 with the intensity 15 i was getting about 360kH/s, now i'm getting 385 with the Intensity 17 Does this damage the card or something like this?
|
| Espers [ESP] | Algorithm hmq1725 |
|
|
|
OhGodAGirl
Full Member
Offline
Activity: 199
Merit: 108
Look, I'm really not that interesting. Promise.
|
|
July 11, 2016, 12:41:02 AM |
|
i'm trying to work with the wolf miner on Ubuntu as you can see in my later posts without much success, now i realized that if i increase the Intensity it get better kH/s
my .BAT using the older miner: sgminer.exe --kernel hmq1725 -o stratum+tcp://esp.suprnova.cc:3451 -u nicolasbonza.3 -p x -I 17
with the intensity 15 i was getting about 360kH/s, now i'm getting 385 with the Intensity 17 Does this damage the card or something like this?
All it's going to do is heat up your GPU - heat is not a danger. It might throttle it, but if it reaches a dangerous temperature, it will turn off. Let me briefly explain what intensity it is - it's the size of the work being submitted to the GPU in one go. The higher the number, the bigger the work load. Intensity isn't a 'go big or go home' number. You want to fiddle around with it to find the optimal balance between performance and hash rate. Too high - 32 - might give you a wonderful rate, but it will start throwing errors. Too low? You'll be stuck with a horrible rate, but you will get a stable machine. What core clock and mem clock are you running at? Try intensity 19, 20, and 25 - let me know what rate you get at each. Don't be afraid to experiment! Ctrl + C should shut it down if you get stressed, but otherwise a reset of your machine and you'll be all good (if it hard locks).
|
|
|
|
Nicolasbonza
Member
Offline
Activity: 112
Merit: 10
|
|
July 11, 2016, 12:52:44 AM |
|
i5 4670 with 16gb of ram (kingston hyperx 1600mhz 4x4),b85m-e/br mobo and my r9 270 saphire and i'm running the cpu miner too :v edit: Wow i put 20 and the hashrate went to 580 for a second
|
| Espers [ESP] | Algorithm hmq1725 |
|
|
|
E1337
|
|
July 11, 2016, 12:54:48 AM |
|
Hi devs Any intresting features in development?
|
|
|
|
OhGodAGirl
Full Member
Offline
Activity: 199
Merit: 108
Look, I'm really not that interesting. Promise.
|
|
July 11, 2016, 12:55:27 AM |
|
i5 4670 with 16gb of ram (kingston hyperx 1600mhz 4x4),b85m-e/br mobo and my r9 270 saphire and i'm running the cpu miner too :v
Don't use the CPU miner AND the GPU miner at the same time! There is no point. GPU is a thousand times better - CPU is a last resort, for folks who have integrated cards, for example. Just run the GPU.
|
|
|
|
Nicolasbonza
Member
Offline
Activity: 112
Merit: 10
|
|
July 11, 2016, 01:00:02 AM |
|
i5 4670 with 16gb of ram (kingston hyperx 1600mhz 4x4),b85m-e/br mobo and my r9 270 saphire and i'm running the cpu miner too :v
Don't use the CPU miner AND the GPU miner at the same time! There is no point. GPU is a thousand times better - CPU is a last resort, for folks who have integrated cards, for example. Just run the GPU. With both working i can get about 480~500kh/s, it's more than i could get with only the gpu edit: If the Wolf0's miner work here as it promises with 7x the current hashrate on linux, i would stop mining with cpu
|
| Espers [ESP] | Algorithm hmq1725 |
|
|
|
OhGodAGirl
Full Member
Offline
Activity: 199
Merit: 108
Look, I'm really not that interesting. Promise.
|
|
July 11, 2016, 01:00:54 AM |
|
i5 4670 with 16gb of ram (kingston hyperx 1600mhz 4x4),b85m-e/br mobo and my r9 270 saphire and i'm running the cpu miner too :v
Don't use the CPU miner AND the GPU miner at the same time! There is no point. GPU is a thousand times better - CPU is a last resort, for folks who have integrated cards, for example. Just run the GPU. With both working i can get about 480~500kh/s, it's more than i could get with only the gpu Turn off the CPU one - run the GPU at intensity 25, tell me what you get.
|
|
|
|
Nicolasbonza
Member
Offline
Activity: 112
Merit: 10
|
|
July 11, 2016, 01:07:12 AM |
|
i5 4670 with 16gb of ram (kingston hyperx 1600mhz 4x4),b85m-e/br mobo and my r9 270 saphire and i'm running the cpu miner too :v
Don't use the CPU miner AND the GPU miner at the same time! There is no point. GPU is a thousand times better - CPU is a last resort, for folks who have integrated cards, for example. Just run the GPU. With both working i can get about 480~500kh/s, it's more than i could get with only the gpu Turn off the CPU one - run the GPU at intensity 25, tell me what you get. it gave me a blue screen :v so i think it's more profitable to work with both cpu and gpu, because i get a more stable hashrate edit: more than 20 intensity was not good :v i think 16 intensity is going well it is now giving me a stable 390kH/s
|
| Espers [ESP] | Algorithm hmq1725 |
|
|
|
OhGodAGirl
Full Member
Offline
Activity: 199
Merit: 108
Look, I'm really not that interesting. Promise.
|
|
July 11, 2016, 01:09:11 AM |
|
i5 4670 with 16gb of ram (kingston hyperx 1600mhz 4x4),b85m-e/br mobo and my r9 270 saphire and i'm running the cpu miner too :v
Don't use the CPU miner AND the GPU miner at the same time! There is no point. GPU is a thousand times better - CPU is a last resort, for folks who have integrated cards, for example. Just run the GPU. With both working i can get about 480~500kh/s, it's more than i could get with only the gpu Turn off the CPU one - run the GPU at intensity 25, tell me what you get. it gave me a blue screen :v so i think it's more profitable to work with both cpu and gpu, because i get a more stable hashrate Lemme summon the hound to take over. I have to head off to bed.
|
|
|
|
Nicolasbonza
Member
Offline
Activity: 112
Merit: 10
|
|
July 11, 2016, 01:14:00 AM Last edit: July 11, 2016, 02:31:35 AM by Nicolasbonza |
|
i5 4670 with 16gb of ram (kingston hyperx 1600mhz 4x4),b85m-e/br mobo and my r9 270 saphire and i'm running the cpu miner too :v
Don't use the CPU miner AND the GPU miner at the same time! There is no point. GPU is a thousand times better - CPU is a last resort, for folks who have integrated cards, for example. Just run the GPU. With both working i can get about 480~500kh/s, it's more than i could get with only the gpu Turn off the CPU one - run the GPU at intensity 25, tell me what you get. it gave me a blue screen :v so i think it's more profitable to work with both cpu and gpu, because i get a more stable hashrate Lemme summon the hound to take over. I have to head off to bed. Intensity - set it to something like 16, then slowly raise it. more than 20 intensity was not good :v i think 16 intensity is going well it is now giving me a stable 390kH/s Tomorrow i'll try to use the wolf0's miner on Ubuntu again, with not much hope edit: with 15 intensity, my gpu temperature was 58 degrees, with 16 it's 58~60 (almost the same)
|
| Espers [ESP] | Algorithm hmq1725 |
|
|
|
SHP-YTC
Member
Offline
Activity: 99
Merit: 10
|
|
July 11, 2016, 05:09:03 AM |
|
someone can compile for windows
Miners have already been compiled for windows Here is a direct download URL for the windows binaries of the older miner: >>>LINK HERE<<<and the new one is >>>HERE<<<I tested sgminer_build_hmq1725_b4 on Win7 64bit. Works without any problems for me. 7950 ~ 1,3 MHs 7850 ~ 880 KHs R7 370 ~ 1,1 MHs On Win 8.1 with a 7850 the miner crashes. Don´t know why but will a have a look tomorrow. I finally finished my new website, specifically for ESP mining hardware comparison. Please check it out : http://esp-setup.weebly.com/If you're interested to add your setup, you'll be rewarded with 5.000 ESP. You can use the contact form on the site or this Google Spreadsheet: https://docs.google.com/spreadsheets/d/1KQKkW-j8VI_ag4Sr4ZvzkCXFsHDbrn78VY4Kvjdfm2k/edit#gid=0 Please share and repost if you like this idea Best regards
|
|
|
|
lucky80
|
|
July 11, 2016, 05:48:40 AM |
|
Strange feeling .....ccminer will come today ....LOL
|
|
|
|
ErikW79
|
|
July 11, 2016, 05:51:40 AM |
|
During compile it writes that file ../src/Makefile.inc not found ... even if I had it pasted there. Anyone lucky with this?
|
|
|
|
|
Nicolasbonza
Member
Offline
Activity: 112
Merit: 10
|
|
July 11, 2016, 12:11:56 PM Last edit: July 11, 2016, 12:21:57 PM by Nicolasbonza |
|
someone can compile for windows
Miners have already been compiled for windows Here is a direct download URL for the windows binaries of the older miner: >>>LINK HERE<<<and the new one is >>>HERE<<<I tested sgminer_build_hmq1725_b4 on Win7 64bit. Works without any problems for me. 7950 ~ 1,3 MHs 7850 ~ 880 KHs R7 370 ~ 1,1 MHs On Win 8.1 with a 7850 the miner crashes. Don´t know why but will a have a look tomorrow. I finally finished my new website, specifically for ESP mining hardware comparison. Please check it out : http://esp-setup.weebly.com/If you're interested to add your setup, you'll be rewarded with 5.000 ESP. You can use the contact form on the site or this Google Spreadsheet: https://docs.google.com/spreadsheets/d/1KQKkW-j8VI_ag4Sr4ZvzkCXFsHDbrn78VY4Kvjdfm2k/edit#gid=0 Please share and repost if you like this idea Best regards Can you add my configuration? Hardware: Sapphire ATI Radeon R9 270 2GB DDR5 256B 11220-00-20G (1x) .BAT file configuration: sgminer.exe --kernel hmq1725 -o stratum+tcp://esp.suprnova.cc:3451 -u nicolasbonza.3 -p x -I 16 Hashrate: 392kH/s Software: sgminer-5-1-1-hmq1725 on Windows 10 Pro 64 bits Hardware: Intel core I5-4670 (1x) .BAT file configuration: cpuminer -a hmq1725 -o stratum+tcp://esp.suprnova.cc:3451 -u nicolasbonza.2 -p x -q Hashrate: 100kH/s Software: cpuminer-hmq1725-win64 on Windows 10 Pro 64 bits Edit: i added my configuration on this link: https://docs.google.com/spreadsheets/d/1KQKkW-j8VI_ag4Sr4ZvzkCXFsHDbrn78VY4Kvjdfm2k/edit#gid=0
|
| Espers [ESP] | Algorithm hmq1725 |
|
|
|
xtrembash
|
|
July 11, 2016, 02:09:39 PM |
|
someone can compile for windows
Miners have already been compiled for windows Here is a direct download URL for the windows binaries of the older miner: >>>LINK HERE<<<and the new one is >>>HERE<<<I tested sgminer_build_hmq1725_b4 on Win7 64bit. Works without any problems for me. 7950 ~ 1,3 MHs 7850 ~ 880 KHs R7 370 ~ 1,1 MHs On Win 8.1 with a 7850 the miner crashes. Don´t know why but will a have a look tomorrow. how can you use sgminer_build_hmq1725_b4 on win 7 without problem?! troll ?! sgminer optimized wolf only works on ubuntu for some guys there is no wolf sgminer working for public atm ...
|
|
|
|
SHP-YTC
Member
Offline
Activity: 99
Merit: 10
|
|
July 11, 2016, 02:19:45 PM |
|
someone can compile for windows
Miners have already been compiled for windows Here is a direct download URL for the windows binaries of the older miner: >>>LINK HERE<<<and the new one is >>>HERE<<<I tested sgminer_build_hmq1725_b4 on Win7 64bit. Works without any problems for me. 7950 ~ 1,3 MHs 7850 ~ 880 KHs R7 370 ~ 1,1 MHs On Win 8.1 with a 7850 the miner crashes. Don´t know why but will a have a look tomorrow. I finally finished my new website, specifically for ESP mining hardware comparison. Please check it out : http://esp-setup.weebly.com/If you're interested to add your setup, you'll be rewarded with 5.000 ESP. You can use the contact form on the site or this Google Spreadsheet: https://docs.google.com/spreadsheets/d/1KQKkW-j8VI_ag4Sr4ZvzkCXFsHDbrn78VY4Kvjdfm2k/edit#gid=0 Please share and repost if you like this idea Best regards Can you add my configuration? Hardware: Sapphire ATI Radeon R9 270 2GB DDR5 256B 11220-00-20G (1x) .BAT file configuration: sgminer.exe --kernel hmq1725 -o stratum+tcp://esp.suprnova.cc:3451 -u nicolasbonza.3 -p x -I 16 Hashrate: 392kH/s Software: sgminer-5-1-1-hmq1725 on Windows 10 Pro 64 bits Hardware: Intel core I5-4670 (1x) .BAT file configuration: cpuminer -a hmq1725 -o stratum+tcp://esp.suprnova.cc:3451 -u nicolasbonza.2 -p x -q Hashrate: 100kH/s Software: cpuminer-hmq1725-win64 on Windows 10 Pro 64 bits Edit: i added my configuration on this link: https://docs.google.com/spreadsheets/d/1KQKkW-j8VI_ag4Sr4ZvzkCXFsHDbrn78VY4Kvjdfm2k/edit#gid=0Thanks a lot Post your ESP adress so I can send you your 10.000 ESP-
|
|
|
|
Nicolasbonza
Member
Offline
Activity: 112
Merit: 10
|
|
July 11, 2016, 02:38:49 PM |
|
someone can compile for windows
Miners have already been compiled for windows Here is a direct download URL for the windows binaries of the older miner: >>>LINK HERE<<<and the new one is >>>HERE<<<I tested sgminer_build_hmq1725_b4 on Win7 64bit. Works without any problems for me. 7950 ~ 1,3 MHs 7850 ~ 880 KHs R7 370 ~ 1,1 MHs On Win 8.1 with a 7850 the miner crashes. Don´t know why but will a have a look tomorrow. I finally finished my new website, specifically for ESP mining hardware comparison. Please check it out : http://esp-setup.weebly.com/If you're interested to add your setup, you'll be rewarded with 5.000 ESP. You can use the contact form on the site or this Google Spreadsheet: https://docs.google.com/spreadsheets/d/1KQKkW-j8VI_ag4Sr4ZvzkCXFsHDbrn78VY4Kvjdfm2k/edit#gid=0 Please share and repost if you like this idea Best regards Can you add my configuration? Hardware: Sapphire ATI Radeon R9 270 2GB DDR5 256B 11220-00-20G (1x) .BAT file configuration: sgminer.exe --kernel hmq1725 -o stratum+tcp://esp.suprnova.cc:3451 -u nicolasbonza.3 -p x -I 16 Hashrate: 392kH/s Software: sgminer-5-1-1-hmq1725 on Windows 10 Pro 64 bits Hardware: Intel core I5-4670 (1x) .BAT file configuration: cpuminer -a hmq1725 -o stratum+tcp://esp.suprnova.cc:3451 -u nicolasbonza.2 -p x -q Hashrate: 100kH/s Software: cpuminer-hmq1725-win64 on Windows 10 Pro 64 bits Edit: i added my configuration on this link: https://docs.google.com/spreadsheets/d/1KQKkW-j8VI_ag4Sr4ZvzkCXFsHDbrn78VY4Kvjdfm2k/edit#gid=0Thanks a lot Post your ESP adress so I can send you your 10.000 ESP- I put another config with the I5-4670 but with different software miner, it's gaving me about 140kH/s, so i put it on the link too Adress: EeoFKkVD5yDDiZq68sGebRxX5SHvEKhsr2 i'll put more info on that link with more cpu's later too
|
| Espers [ESP] | Algorithm hmq1725 |
|
|
|
|