_IL__
Newbie
Offline
Activity: 14
Merit: 0
|
|
January 25, 2018, 03:00:49 PM |
|
Hi everyone! I have a problem with 12*1060 rig with h110 motherboard. It can work fine for days, but suddenly hashrate falls. For example , from 320 sol to 20 for all cards. The different miner (claymore) don't change the situation. Any idea?
|
|
|
|
|
|
|
|
|
Even if you use Bitcoin through Tor, the way transactions are handled by the network makes anonymity difficult to achieve. Do not expect your transactions to be anonymous unless you really know what you're doing.
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
|
|
|
Squintz
Newbie
Offline
Activity: 50
Merit: 0
|
|
January 25, 2018, 03:59:28 PM |
|
Is SMOS down? Getting long login retys and other fucky things happening?
|
|
|
|
Squintz
Newbie
Offline
Activity: 50
Merit: 0
|
|
January 25, 2018, 04:23:54 PM |
|
It's not bad power, that wouldn't cause one card to flake out. It could be a bad riser, cable or the little PCIE chip that plugs into the slot. I've had bad risers that run fine for days or weeks and then all of the sudden cards will drop off. I hate to be obvious, but have you updated the BIOS and tried to set the Gen settings for the slots etc? I have one ASUS board and the rest are ASROCK H110 pro's. The H110's are setup for mining and fired right up, I have 6 10 card rx580 rigs running SMOS. The ASUS board is 8 cards and was kind of a PITA to get running. Had to set everything related to PCIE to Gen1, disable SATA controller, audio controller etc. Finally it has been running for over a week. I read ton's on boards before setting up my 10 card rigs and stayed away from the B250 as it seemed to have overheating issues and just be unstable compared to the H110 or another board. Hell, I paid $129 for my Asus Z270-P and it runs 8 cards...
Thanks for your answer. In the B250 bios there is a mining mode where everything gets set properly right away (gen1, above 4g decoding). I turned off the audio already but I can try and turn off all the things I don't use. Tonight I'll do that and also embark on a mission to identify the faulty riser, if any. I don't want to run with 1 risers at a time to identify the faulty one... I guess I'll try removing them 1 by 1 instead even if it might not be as accurate (if I have 2 faulty ones). Otherwise I already ordered a new 6 pack of risers earlier this week since I have 3 more GPUs on the way. Make sure you aren't trying to boot with a monitor plugged into one of the mining cards on B250. Also I found that mining mode doesn't really get you exactly where you need to be. You still need to set all your pcie to gen2 enable csm(I think that's what it's called). And make sure to enable onboard video.
|
|
|
|
XxsmasxX
Newbie
Offline
Activity: 76
Merit: 0
|
|
January 25, 2018, 04:32:28 PM |
|
Funny that every day an equipment disappears of the monitoring on the site .. restarts in another wallet and no name. but nothing happens in ethman. would the platform with bot to select some pool inside the file -epool and changing without restarting the machine? very strange .. I get email from the pool saying that my miner is off but in ethman nothing happened
|
|
|
|
hammerking
Newbie
Offline
Activity: 50
Merit: 0
|
|
January 25, 2018, 06:42:45 PM |
|
cloud is down?
MIX NVIDA AND AMD?
|
|
|
|
Teemu
Newbie
Offline
Activity: 5
Merit: 0
|
|
January 25, 2018, 06:56:40 PM |
|
Does anyone else noticed increased rebooting since latest update? I had 2rigs running 570s and 580s stable for more than 2 weeks in a row, now they reboot few times per day.. why is that?
|
|
|
|
mytiburon
Newbie
Offline
Activity: 31
Merit: 0
|
|
January 25, 2018, 06:59:58 PM |
|
Looking for a little overclocking help with nvidia cards plesase.
i am running a 1080ti asus rig.
5 are the O/C version specs are 1594 clock boost to 1708 memory 11,100 boost mode 11000 gaming mode 1 is standard gaming version specs are 1518 boost to 1634 memory 11,100 boost 11000 gaming mode
As i understand "most" higher end cards and most rog strix can reach 2050 mhz core and 11400 mhz memory.
my o/c settings are : strix O/C model- 100 core 100 memory 225 power limit- my Results are 1900 mhz core and 5050 mhz memory according to smos strix gaming model -175 core 100 memory 225 power limit-my results are 1885 mhz core and 5050 mhz memory according to smos
so it appears to me that smos shows the memory in "standard" not boosted speeds and it outputs the total speed divided by 2 **10,000 mhz plus 100 mhz smos o/c dived by 2=5050 that seems to make sense to me
but the core speed dosent- they all report around that 1900mhz should the core on the overclock model not be 1708 (factory boosted speed)plus smos 100 overclock=1808 and my gaming version 1634 (factory speed)+175 smos overclock =1825
Any help and sense of these numbers would be appreciated.
|
|
|
|
ensoru
Newbie
Offline
Activity: 12
Merit: 0
|
|
January 25, 2018, 07:02:21 PM |
|
The problem with offline dahsboard is fixed. OVH Cloud infrastructure had problem with disk performance (the speed degraded 20 times). They fixed this after about 1,5 hour. Anyway i am speaking with AWS Amazon cloud providet to move there becasue OVH is ....... I am sorry for that problem. Keep in mind that all your rigs should be mining fine with last downloaded settings even if dashboard is offline. When simplemining dahsboard is offline it is important to check your rigs statistics on pool website just to be calm. Thanks for your patience and your support !
Hello.. today my 2 rig offline in dashboard, but worked fine on pool. 1st internet connection 1 rig on second (other) internet connection online 2 rig on 3rd (other) internet connection online too in dashboard.. Help.. it happened today any hours ago
|
|
|
|
mytiburon
Newbie
Offline
Activity: 31
Merit: 0
|
|
January 25, 2018, 07:33:43 PM |
|
Looking for a little overclocking help with nvidia cards plesase.
i am running a 1080ti asus rig.
5 are the O/C version specs are 1594 clock boost to 1708 memory 11,100 boost mode 11000 gaming mode 1 is standard gaming version specs are 1518 boost to 1634 memory 11,100 boost 11000 gaming mode
As i understand "most" higher end cards and most rog strix can reach 2050 mhz core and 11400 mhz memory.
my o/c settings are : strix O/C model- 100 core 100 memory 225 power limit- my Results are 1900 mhz core and 5050 mhz memory according to smos strix gaming model -175 core 100 memory 225 power limit-my results are 1885 mhz core and 5050 mhz memory according to smos
so it appears to me that smos shows the memory in "standard" not boosted speeds and it outputs the total speed divided by 2 **10,000 mhz plus 100 mhz smos o/c dived by 2=5050 that seems to make sense to me
but the core speed dosent- they all report around that 1900mhz should the core on the overclock model not be 1708 (factory boosted speed)plus smos 100 overclock=1808 and my gaming version 1634 (factory speed)+175 smos overclock =1825
Any help and sense of these numbers would be appreciated.
I almost forgot 733 sols average and 3.25 sol/w with dstm miner
|
|
|
|
willi9974
Legendary
Offline
Activity: 3430
Merit: 2663
Escrow Service
|
|
January 25, 2018, 08:02:39 PM |
|
Hello,
I will build new rigs with smOS and have no idea is it better to buy amd or nvidia cards, and if nvidia witch card has the best price performance value?
Best Regards Willi
|
. .BLACKJACK ♠ FUN. | | | ███▄██████ ██████████████▀ ████████████ █████████████████ ████████████████▄▄ ░█████████████▀░▀▀ ██████████████████ ░██████████████ █████████████████▄ ░██████████████▀ ████████████ ███████████████░██ ██████████ | | CRYPTO CASINO & SPORTS BETTING | | │ | | │ | ▄▄███████▄▄ ▄███████████████▄ ███████████████████ █████████████████████ ███████████████████████ █████████████████████████ █████████████████████████ █████████████████████████ ███████████████████████ █████████████████████ ███████████████████ ▀███████████████▀ ███████████████████ | | .
|
|
|
|
azertypaco
Newbie
Offline
Activity: 20
Merit: 0
|
|
January 25, 2018, 08:36:56 PM |
|
It's not bad power, that wouldn't cause one card to flake out. It could be a bad riser, cable or the little PCIE chip that plugs into the slot. I've had bad risers that run fine for days or weeks and then all of the sudden cards will drop off. I hate to be obvious, but have you updated the BIOS and tried to set the Gen settings for the slots etc? I have one ASUS board and the rest are ASROCK H110 pro's. The H110's are setup for mining and fired right up, I have 6 10 card rx580 rigs running SMOS. The ASUS board is 8 cards and was kind of a PITA to get running. Had to set everything related to PCIE to Gen1, disable SATA controller, audio controller etc. Finally it has been running for over a week. I read ton's on boards before setting up my 10 card rigs and stayed away from the B250 as it seemed to have overheating issues and just be unstable compared to the H110 or another board. Hell, I paid $129 for my Asus Z270-P and it runs 8 cards...
Thanks for your answer. In the B250 bios there is a mining mode where everything gets set properly right away (gen1, above 4g decoding). I turned off the audio already but I can try and turn off all the things I don't use. Tonight I'll do that and also embark on a mission to identify the faulty riser, if any. I don't want to run with 1 risers at a time to identify the faulty one... I guess I'll try removing them 1 by 1 instead even if it might not be as accurate (if I have 2 faulty ones). Otherwise I already ordered a new 6 pack of risers earlier this week since I have 3 more GPUs on the way. Make sure you aren't trying to boot with a monitor plugged into one of the mining cards on B250. Also I found that mining mode doesn't really get you exactly where you need to be. You still need to set all your pcie to gen2 enable csm(I think that's what it's called). And make sure to enable onboard video. Thanks. I use onboard video already. I had to enable CSM to even be able to boot so that's the first thing I ever did. I played around with the PCI settings.. not sure if I tried GEN2 already. I'll test that AND I'll start writing down everything I do otherwise I'll end up doing everything twice while forgetting other things to try
|
|
|
|
bmxakias
|
|
January 25, 2018, 09:10:40 PM |
|
The problem with offline dahsboard is fixed. OVH Cloud infrastructure had problem with disk performance (the speed degraded 20 times). They fixed this after about 1,5 hour. Anyway i am speaking with AWS Amazon cloud providet to move there becasue OVH is ....... I am sorry for that problem. Keep in mind that all your rigs should be mining fine with last downloaded settings even if dashboard is offline. When simplemining dahsboard is offline it is important to check your rigs statistics on pool website just to be calm. Thanks for your patience and your support !
Hello.. today my 2 rig offline in dashboard, but worked fine on pool. 1st internet connection 1 rig on second (other) internet connection online 2 rig on 3rd (other) internet connection online too in dashboard.. Help.. it happened today any hours ago Me too..
|
|
|
|
shacalaca
Newbie
Offline
Activity: 1
Merit: 0
|
|
January 25, 2018, 09:45:19 PM |
|
Hello guys,
i have 3x 6 gpu rx 470...i flashed the cards and every rig shows 1060W from the wall. Also, when i didn't flashed the cards it showed 980W. I'm using Ubuntu and it just shows terminal when i connect monitor to rig..is there any way that i can undervolt rig like on windows with trixx or afterburner. I appreciate every advice.
|
|
|
|
Rcalin
Newbie
Offline
Activity: 28
Merit: 0
|
|
January 25, 2018, 09:54:13 PM |
|
Anyone else not being able to access Rig list?
|
|
|
|
boklos
Newbie
Offline
Activity: 5
Merit: 0
|
|
January 25, 2018, 10:39:48 PM |
|
can someone help how to mine on zergpool for zcl or zen ?
|
|
|
|
tangonaboat
Newbie
Offline
Activity: 23
Merit: 0
|
|
January 25, 2018, 11:43:30 PM |
|
Anyone else not being able to access Rig list?
I can't either but the pool shows I'm mining
|
|
|
|
Rcalin
Newbie
Offline
Activity: 28
Merit: 0
|
|
January 25, 2018, 11:44:47 PM |
|
Anyone else not being able to access Rig list?
I can't either but the pool shows I'm mining Yes, all good with mining, but I would like to be able to access my rigs....
|
|
|
|
hammerking
Newbie
Offline
Activity: 50
Merit: 0
|
|
January 26, 2018, 01:34:25 AM |
|
I'm in trouble, I changed the coin I want to mine, but it only mins xmr, does not change the pool, simplemining is in trouble for days, I'm going to download hiveOS
|
|
|
|
ensoru
Newbie
Offline
Activity: 12
Merit: 0
|
|
January 26, 2018, 03:27:55 AM |
|
Anyone else not being able to access Rig list?
I was so yesterday. From the phone I can not get RigList, but was able to log in from my home PC developer! what could be the problem? Now I have 4 online rigs in Dashboard 2 offline, one of which was lost on the pool and I can not find the reason! it's 13x 1070, I'm losing money.
|
|
|
|
naeme18720
|
|
January 26, 2018, 05:24:53 AM |
|
Please update xmr stake amd to v2 3 Please please please
|
|
|
|
|