deadsix
|
|
December 18, 2017, 09:53:30 PM |
|
I’m right there with you Looking at going back to windows and using awesomeminer again Hive OS also has my attention atm also
Holy cr*p that Hive OS looks good. I need support for 19 gpu's cause I have ASUS b250 board and I can't have empty slots because SMOS still doesn't support more GPU's. or will go to free Linux. Seems to me people are getting more and more unsatisfied with SMOS. Either guys at SMOS are getting over their head or not interested in keeping their customers. Seems to me noob's these days are feelin more and more entitled. SMoS is not a team, it is one person. Also, the crappy B250 board is yet to support more than 13 GPU's, Asus promised a BIOS update but it hasn't arrived yet. So I wonder what it is that you feel SMoS isnt supporting? Can you get more than 13 to work in Windows? Or some other flavor of linux? Cause SMoS supports the maximum GPU/Motherboard combos of any linux based OOB mining OS. It is the cleanest easiest to use unified Mining OS that I have ever used, and I have used them ALL (except perhaps Eliovp's PandaminerOS).
|
|
|
|
AltcoinScamfinder
|
|
December 18, 2017, 10:16:03 PM |
|
Does anyone know what version and settings to run for Pandminer (470 version) with simplemining? So damn tired of the Pandaminer Windows crap Also, do I use the dagfix version or not?
All mine (i have 30 470 pandas) are on Smos and they are hashing at 235. I can't log into smos at the moment it must be down but I did not mod the oc setting or anything as I recall. EDIT: Ok just logged in: no mods but visible settings on screen are 1145 2100 core - blank mem - blank underv - blank ps - 6 tt- 75 Thank you sir!
|
FOR RENT.
|
|
|
dotpool
Newbie
Offline
Activity: 8
Merit: 0
|
|
December 18, 2017, 10:40:11 PM |
|
Add Claymore XMR v11
|
|
|
|
G_Crypt
Newbie
Offline
Activity: 27
Merit: 0
|
|
December 19, 2017, 02:35:23 AM |
|
Add Claymore XMR v11
Say please.. im sure the dev would appreciate some manners guys.
|
|
|
|
ysakay
|
|
December 19, 2017, 03:53:07 AM |
|
hi guys. which iso is the best for AMD (RX480/580)?
|
|
|
|
lablefromu
Newbie
Offline
Activity: 11
Merit: 0
|
|
December 19, 2017, 07:15:48 AM |
|
hi, i need your help
how can I update nvidia driver ?
currently 384 version is installed
|
|
|
|
Skeda
Newbie
Offline
Activity: 4
Merit: 0
|
|
December 19, 2017, 07:22:22 AM |
|
I had a problem. I bought the videocard 1070. Put powerlimit = 10. Not issue more than 340 Sol card. More than 10 powerlimit doesn't even work. On the Eth card little give - 25 mgh. Tell me
|
|
|
|
willi9974
Legendary
Offline
Activity: 3570
Merit: 2821
Escrow Service
|
|
December 19, 2017, 07:22:33 AM |
|
My rig need 1695 Watt with 13 RX570 cards and has hash from 370mhs it is possible to bring the power a little bit down and keep the hashrate? Core MHz: 1100 Mem MHz: 2100,2100,2100,2100,1900,2100,2100,1950,2000,1900,1900,1900,2000 Power Level: 1 Undervolting: 900 Fan: 40% ETH - Total Speed: 369.298 Mh/s, Total Shares: 3192, Rejected: 0, Time: 11:56
ETH: GPU0 29.684 Mh/s, GPU1 29.677 Mh/s, GPU2 29.693 Mh/s, GPU3 29.542 Mh/s, GPU4 27.247 Mh/s, GPU5 29.664 Mh/s, GPU6 29.674 Mh/s, GPU7 24.940 Mh/s, GPU8 28.726 Mh/s, GPU9 27.676 Mh/s, GPU10 27.579 Mh/s, GPU11 26.559 Mh/s, GPU12 28.638 Mh/s
GPU0 t=55C fan=40%, GPU1 t=50C fan=40%, GPU2 t=47C fan=40%, GPU3 t=54C fan=40%, GPU4 t=44C fan=40%, GPU5 t=44C fan=40%, GPU6 t=50C fan=40%, GPU7 t=51C fan=40%, GPU8 t=45C fan=40%, GPU9 t=57C fan=40%, GPU10 t=40C fan=40%, GPU11 t=45C fan=40%,GPU12 t=55C fan=40% Best Regards Willi
|
|
|
|
Skeda
Newbie
Offline
Activity: 4
Merit: 0
|
|
December 19, 2017, 07:30:35 AM |
|
Another problem. When the monitor is connected to the Rx 470 cards on the monitor all shows. When connecting the monitor to the card 1070 on the monitor nothing, although the miner is working. ?!
|
|
|
|
Hotmetal
|
|
December 19, 2017, 07:34:49 AM |
|
I prefer use https://hiveos.farm with this moterboard I find too much fail now with SMOS. On ETH for memory 2250 is TOO HIGH in my opinion I put 2100/2150 maximum For weeks when SMOS doesn't reboot or reload when there is a problem. All is green but the rig is freeezing you must look at the console to see time is 2 or 3 hours sooner. I ordered some B250 minig expert to migrate my other rigs on hiveos. WOAH! I like SMOS but HIVEOS is a game changer...
|
|
|
|
zot57
Newbie
Offline
Activity: 165
Merit: 0
|
|
December 19, 2017, 07:45:10 AM |
|
Seems to me noob's these days are feelin more and more entitled. SMoS is not a team, it is one person. Also, the crappy B250 board is yet to support more than 13 GPU's, Asus promised a BIOS update but it hasn't arrived yet. So I wonder what it is that you feel SMoS isnt supporting? Can you get more than 13 to work in Windows? Or some other flavor of linux? Cause SMoS supports the maximum GPU/Motherboard combos of any linux based OOB mining OS. It is the cleanest easiest to use unified Mining OS that I have ever used, and I have used them ALL (except perhaps Eliovp's PandaminerOS).
ASUS gave update few days ago. You obviously didn't use HIVE OS for example, which btw rules. SMOS is 1 person? he makes all that money and he can't hire at least 2-3 more devs? somebody is cheap! no wonder people are not satisfied with this OS anymore, he can't produce all those updates by himself. Miners need and must have all the latest updates such as dstm miner because we depend on those improvements to make money. If you don't support it someone else will --> Hive OS.
|
|
|
|
deadsix
|
|
December 19, 2017, 08:36:07 AM |
|
Seems to me noob's these days are feelin more and more entitled. SMoS is not a team, it is one person. Also, the crappy B250 board is yet to support more than 13 GPU's, Asus promised a BIOS update but it hasn't arrived yet. So I wonder what it is that you feel SMoS isnt supporting? Can you get more than 13 to work in Windows? Or some other flavor of linux? Cause SMoS supports the maximum GPU/Motherboard combos of any linux based OOB mining OS. It is the cleanest easiest to use unified Mining OS that I have ever used, and I have used them ALL (except perhaps Eliovp's PandaminerOS).
ASUS gave update few days ago. You obviously didn't use HIVE OS for example, which btw rules. SMOS is 1 person? he makes all that money and he can't hire at least 2-3 more devs? somebody is cheap! no wonder people are not satisfied with this OS anymore, he can't produce all those updates by himself. Miners need and must have all the latest updates such as dstm miner because we depend on those improvements to make money. If you don't support it someone else will --> Hive OS. Continued support is paramount, agreed, but Tytanik hasn't failed us yet. Since he is a one man show, it takes a short while for updates, especially if they're needed to support some new/obscure combo of hardware that not many people may be using, but they do come out eventually. Asus gave a general bios update, still no update to fix support for 19 GPU's. Also HiveOS is good, but does not work on 3 of my wide variety of motherboards while SMoS does, so I cant give it full points. I want them both to succeed because competition in the mining OS market is good for us, the consumers.
|
|
|
|
dotpool
Newbie
Offline
Activity: 8
Merit: 0
|
|
December 19, 2017, 11:03:38 AM |
|
Add Claymore XMR v11
Say please.. im sure the dev would appreciate some manners guys. Yep, you are right. Just imagine I didn't wrote that. Here's the better way: Please add Claymore XMR v11 so we can mine CryptoNight on Claymore's Miner. v10.2 hangs out wgen it comes to devfee mining after Nicehash was hacked. I would appreciate it a lot!
|
|
|
|
marimach77
Member
Offline
Activity: 127
Merit: 10
|
|
December 19, 2017, 01:18:54 PM |
|
i tried it with my 4 Vegas, but it is not finding any GPUs i tested the newer RC2 version. Then I cannot help you. You need to ask @tytanick. But tomorrow I will have one Vega 56 to make some tests. I'll let you know whether my test rig can see it or not. thank you. Gigabyte RX Vega 56 does not work with SMOS beta http://download.simplemining.net/beta/simpleminer-RX-NV-rc2.img.zip image. No OPENGL drivers or something like that message.
|
|
|
|
twofreckles
|
|
December 19, 2017, 02:11:02 PM |
|
There is need not only for new Claymore but also sgminer and gateless. Im prety sure tytanick will add it asap
|
|
|
|
jadefalke
Legendary
Offline
Activity: 1456
Merit: 1014
|
|
December 19, 2017, 06:35:34 PM |
|
Hi Guys,
i have 3 SRR, one of the First batch and 2 of the second Batch. Have anyone an Pin Out for the 4 Wires (first Batch)? because the Colors are diffrent from the Manuel.
In General i have a Problem in understanding how that SRR is supposed to work. I cannot configure the SRR with a Full Network Config, i can only set IP Address without DNS, Netmask or DNS. So how is that supposed to work. Do the Miner and the SRR need to be on the same Broadcast Network? This whole thing looks pretty poor Desing from Network and Security Perspective, no Login or PW protection. I'm in a Network with a lot of other Miner, how can that be secured?
Appreciate your help Guys.
|
|
|
|
tytanick (OP)
Legendary
Offline
Activity: 2660
Merit: 1096
Simplemining.net Admin
|
|
December 19, 2017, 08:34:43 PM |
|
Update v1133I just added claymore-xmr v11.0 miner Hi Guys, i have 3 SRR, one of the First batch and 2 of the second Batch. Have anyone an Pin Out for the 4 Wires (first Batch)? because the Colors are diffrent from the Manuel. In General i have a Problem in understanding how that SRR is supposed to work. I cannot configure the SRR with a Full Network Config, i can only set IP Address without DNS, Netmask or DNS. So how is that supposed to work. Do the Miner and the SRR need to be on the same Broadcast Network? This whole thing looks pretty poor Desing from Network and Security Perspective, no Login or PW protection. I'm in a Network with a lot of other Miner, how can that be secured? Appreciate your help Guys.
There is separate thread for SRR device: https://bitcointalk.org/index.php?topic=1695298.new;topicseen#newAnyway, the instruction for the SSRv1 is here: https://simplemining.net/download/SRR/PDF/SRR-manual-2017-02-20.pdfSo that should help you. If you will still have problems then please write me email to admin@simplemining.netThe rigs(Agent installed on each rig) and SRR device needs to be in one network. They are communicating via Broadcast. No need for any security here as all is done in the same network. Device is not designed to work in untrusted enviroment. ASUS gave update few days ago. You obviously didn't use HIVE OS for example, which btw rules. SMOS is 1 person? he makes all that money and he can't hire at least 2-3 more devs? somebody is cheap! no wonder people are not satisfied with this OS anymore, he can't produce all those updates by himself. Miners need and must have all the latest updates such as dstm miner because we depend on those improvements to make money. If you don't support it someone else will --> Hive OS.
Accualy we are now 4 persons. +5th from time to time. Anyway i have big trust issues so i wont give access to anyone from my team. The all work is going to me. Its slow but it is more secure. And yes, People have choice and i will never force anyone to use my OS. There is perfectmine.io, Hive OS, and also easymine.io emerging, PIMP, ETHOS and i guess some others that i am not aware of + Windows ofcourse that is free and solves all problems
|
|
|
|
enhacker
Newbie
Offline
Activity: 3
Merit: 0
|
|
December 19, 2017, 08:58:52 PM |
|
Update v1133I just added claymore-xmr v11.0 miner Hi Guys, i have 3 SRR, one of the First batch and 2 of the second Batch. Have anyone an Pin Out for the 4 Wires (first Batch)? because the Colors are diffrent from the Manuel. In General i have a Problem in understanding how that SRR is supposed to work. I cannot configure the SRR with a Full Network Config, i can only set IP Address without DNS, Netmask or DNS. So how is that supposed to work. Do the Miner and the SRR need to be on the same Broadcast Network? This whole thing looks pretty poor Desing from Network and Security Perspective, no Login or PW protection. I'm in a Network with a lot of other Miner, how can that be secured? Appreciate your help Guys.
There is separate thread for SRR device: https://bitcointalk.org/index.php?topic=1695298.new;topicseen#newAnyway, the instruction for the SSRv1 is here: https://simplemining.net/download/SRR/PDF/SRR-manual-2017-02-20.pdfSo that should help you. If you will still have problems then please write me email to admin@simplemining.netThe rigs(Agent installed on each rig) and SRR device needs to be in one network. They are communicating via Broadcast. No need for any security here as all is done in the same network. Device is not designed to work in untrusted enviroment. ASUS gave update few days ago. You obviously didn't use HIVE OS for example, which btw rules. SMOS is 1 person? he makes all that money and he can't hire at least 2-3 more devs? somebody is cheap! no wonder people are not satisfied with this OS anymore, he can't produce all those updates by himself. Miners need and must have all the latest updates such as dstm miner because we depend on those improvements to make money. If you don't support it someone else will --> Hive OS.
Accualy we are now 4 persons. +5th from time to time. Anyway i have big trust issues so i wont give access to anyone from my team. The all work is going to me. Its slow but it is more secure. And yes, People have choice and i will never force anyone to use my OS. There is perfectmine.io, Hive OS, and also easymine.io emerging, PIMP, ETHOS and i guess some others that i am not aware of + Windows ofcourse that is free and solves all problems I'm trying to use SMOS, but I can't even get the flashed usb to boot. Have SMOS on 32gb usb 3.0 device. Actually I don't know if it's booting or not since I can't get video feed to my monitor. SMOS Dashboard shows nothing so I suppose it doesn't boot? This is the hardware: MSI Z170a MOBO 7 RX470 4gb graphics cards Intel chipset Was running ethos and mining ETH perfectly fine so no issues with power. Couldn't change to mine etn so I have so far tried and continued to have trouble with all graphics cards on win10, ubuntu and elementary OS. Finally trying SMOS, but since I can't get it to work how can I reset my settings in BIOS to start over from beginning? 1. Yes usb is first in boot queue. (Does UEFI mode or not matter? Which should I have?) 2. Have latest BIOS 3. 4g enabled How can I troubleshoot? Thanks in advance, I have been trying to get this to work for a week straight now and I'm happily inviting for beer to anyone who can help me get this pile to work properly.
|
|
|
|
enhacker
Newbie
Offline
Activity: 3
Merit: 0
|
|
December 19, 2017, 09:14:20 PM |
|
Can only get to BIOS if I unplug ALL of my graphics cards.. Even having inserted one of them during boot results in black screen.
Here is full list of hardware: MOBO: Z170A Gaming Pro Carbon (MS-7A12) BIOS: E7A12IMS v1.80 CPU: Intel(R) Pentium(R) CPU G4400 @ 3.30Hz GPU: 7 x RX470 4gb RAM: 2 x 4GB Corsair DDR4 SDRAM
Boot order: 1. USB Key 2. UEFI USB Key 3. UEFI Hard Disk ...
Have the same specified advanced settings as instructed on simplemining installation guide.
|
|
|
|
enhacker
Newbie
Offline
Activity: 3
Merit: 0
|
|
December 19, 2017, 09:26:54 PM |
|
Can only get to BIOS if I unplug ALL of my graphics cards.. Even having inserted one of them during boot results in black screen.
Here is full list of hardware: MOBO: Z170A Gaming Pro Carbon (MS-7A12) BIOS: E7A12IMS v1.80 CPU: Intel(R) Pentium(R) CPU G4400 @ 3.30Hz GPU: 7 x RX470 4gb RAM: 2 x 4GB Corsair DDR4 SDRAM
Boot order: 1. USB Key 2. UEFI USB Key 3. UEFI Hard Disk ...
Have the same specified advanced settings as instructed on simplemining installation guide.
Instead of getting a black screen I instead got a colored pixelated scramble. This time also without any connected graphics cards. What, if anything, is supposed to on screen when booting SMOS without graphics cards?
|
|
|
|
|