[Mining OS] SimpleMining.net - Manage Your GPU farm the easy way! (30 days free)

[tymeksm]

Miners update
- miniz-v1.8z (Improved performance and stability for ETH for LHR GPUs. Improved performance for RTX 30XX, for 125,4 algo (Flux). Added AMD support for 125,4 (Flux), for RX 470/480/570/580 GPUs. Added FIRO support. GPU brand shows on log. Fixed issues with SERO. Fixed issues with 192,7. Added option to dump pool stratum communication, --protocol-dump. Added options to fix core and mem clocks. (require sudo). --gpuclock to apply list of GPU clocks. --memclock to apply list of memory clocks. --power to apply list of power limits (requires sudo). or -pl. Added option for SOCKS --socks. dded option to let SOCKS proxy resolve DNS requests, --socksdns. Added options --amd/--nvidia to select amd/nvidia GPUs, respectively. Added the short average avg0 to getstat. Minor bug fixes)

[1715565473]

1715565473

[1715565473]

1715565473

[1715565473]

1715565473

[infilz]

Hello there,
Is it possible to use the monitoring and alert feature without operating the miners from your software ?

I'm using nicehash and i just want a tool to alert me when my GPU Hashrate drops or when temperature goes over a selected value.

Can i do this on your software ?

[tytanick]

Hello there,
Is it possible to use the monitoring and alert feature without operating the miners from your software ?

I'm using nicehash and i just want a tool to alert me when my GPU Hashrate drops or when temperature goes over a selected value.

Can i do this on your software ?

No, SimpleMining is Operating system, not software like nicehash.
You need to boot simplemining Operating system to use it.

[infilz]

Hello there,
Is it possible to use the monitoring and alert feature without operating the miners from your software ?

I'm using nicehash and i just want a tool to alert me when my GPU Hashrate drops or when temperature goes over a selected value.

Can i do this on your software ?

No, SimpleMining is Operating system, not software like nicehash.
You need to boot simplemining Operating system to use it.

thanks for the fast reply

[tymeksm]

Miners update
- bzminer-v9.0.0 (New coin: Ixian (Experimental, AMD not yet optimized). Kaspa: Blockchain dev fee added when mining to pool. Kaspa: Fixed crashing after some time. Kaspa: Fixed solo mode ports not closing properly. Kaspa: Fixed invalid extra nonce. Kaspa: Warn if wallet doesn't start with kaspa. Kaspa: Ability to toggle blockchain team dev fee (2%, blockchain_fee). Option to increase dev fee (extra_dev_fee). Internal stability fixes related to logging from multiple threads. Bug fix: tbs < 1 second not displaying properly. Bug fix: Hung GPU not resetting hashrate. Bug fix: Command line intensity not overriding for all devices)


Miners update
- bzminer-v9.0.0-fix (Just fixed showing dualmining API with zeroes even if mining one algo)

[tytanick]

Dashboard update
- New layout for simplemining.net website.
- There is also new beautifull dashboard layout in progress that should be released within 1-2 months.
- For sub-user You can now specify what groups can see that user.
- New filter rig offline more than XX hour/day

[tymeksm]

Miners update
- phoenixminer-v6.2c-beta (Beta release. Using newer AMD RX470/480/570/580 kernels even on older drivers 19.10, or newer. Use -clabi 1 to revert to older kernels on these drivers. Added workaround for SSL pools with self-signed or expired SSL cert - use -weakssl/-weakssl2. Fixed crash Nvidia cards on some older drivers (e.g. 460.79, 460.89). If PhoenixMiner crashes or exits while showing Initializing NVML... try new -nvmalt. Other small fixes)
- t-rex-v0.25.15 (Extend new LHR unlock to ETH+ALPH dual mining, and ERGO single mode. LHR tune values aren't accurate, but once you've found a value that's stable for your GPU, you can set it manually with --lhr-tune and get consistent results across miner restarts. LHR Allow setting "up" and "down" auto-tune intervals separately. Change --lhr-autotune-step-size default value to 0.1. LHR Low power mode can be set for GPUs individually --lhr-low-power 0,1,1,0. If you previously had --lhr-low-power in your config, the equivalent would be --lhr-low-power 1. Fix: LHR unlocker is more stable compared to 0.25.12, infinite LHR lock loops should be solved. Fixed ethash, blake3 "Duplicate share" issue. IMPORTANT: LHR unlocker requires 510.xx)

[tymeksm]

Miners update
- teamblackminer-v1.63 (Added support for SSL mining / anonymous mining. Reduced GPU memory requirements in copy dag mode (extend life of low memory cards). Fix GPU timeout on AMD cards with high intensity. Some short options changed names)

[tymeksm]

Miners update
- bzminer-v9.0.2 (GDDR5 Memory Tweak (--oc_mem_tweak). Fix: solution latency reporting slowly increasing. Fix: Crash at startup in some cases. Fix: Networking performance. Fix: Ixian not submitting found solutions after some time)

[tymeksm]

Miners update
- lolminer-v1.49 (Improved performance Nvidia LHR V2 cards in Ethash to 79 - 79.5% (86.5 - 87 % on RTX 3060 V1 and 460.39 driver). Note that dual mode codes remain unchanged. Added an experimental zombie mode for Nvidia Pascal generation 5GB cards, allowing them to continue mining Ethash after epoch 492. Reduced fee for LHR unlocker back to 0.7%. Now all Ethash solo codes have only 0.7% fee (again). LHR cards that have memory junction temperature sensors will automatically throttle LHR unlock by ~0.4 - 0.5% when hitting 106° C memory clock to prevent unneeded locks. LHR calibration on startup now taking approx 2 minutes instead of 4. Extended crc table for Ethash up until epoch 550. Changed default behavior for "." signs in wallet address when Ton or Aleph dual mining. These will now automatically separate the string at the given position, so the thing after a . is treated as worker name.
  Fixed a bug that may cause TLS connections not cleanly reconnecting after a connection loss)
- nbminer-nebutech-v41.0 (100% LHR unlocker added,. Run nbminer with admin priviledge to get 100% LHR unlock. Tested and verified on drivers 510.60. Other driver versions may have some compatibility issue. Previous LHR mode are removed. Note: If you run into issues, please change driver to recommened versions (use newest SimpleMiningOS beta image with such driver version), and set your memclock 100 ~ 200mhz lower that previous LHR partial unlock situation
- phoenixminer-v6.2c (prev phoenixminer-v6.2c-beta now is official stable release)

[mochaaa]

there seems to be connectivity issues with the beta image - old image, no problems -> new beta image, cant seem to pull IP address (including fresh install of beta image on new thumb drive, etc)

[tymeksm]

SimpleMining images update
- SM-i053-5.10.60-1-a20.40-r5.11.38-f21.40.1-n510.60.02 (Updated stable image with new NVIDIA driver required for LHR unlock with nbminer version released yesterday)

[philipma1957]

SimpleMining images update
- SM-i053-5.10.60-1-a20.40-r5.11.38-f21.40.1-n510.60.02 (Updated stable image with new NVIDIA driver required for LHR unlock with nbminer version released yesterday)

Just came here to look at this.  Thanks

old version burns 355 watts at kill a watt meter and does 76-81mh


and we are over 108  with 360 on the watt meter  and just like that 3090s have been crushed

[tymeksm]

Miners update
- miniz-v1.8z2
- nbminer-nebutech-v41.3 (Ethash Improve stability of LHR unlocker. Ethash fix crash on AMD GPUs. Ethash Improve compatibility on rigs with small system memory)

[mitak64]

Teamredminer with R-Mode enabled for AMD 5600/5700 ?

[tymeksm]

Miners update
- bzminer-v9.1.0 (100% LHR Unlock v1! (Unstable, experimental, lower oc's). LHR Unlock stability adjuster --lhr_stability. GDDR5 --oc_mem_tweak. Added pause to end of batch files. Fixed Nvidia oc's sometimes not engaging)

[tymeksm]

Miners update
- t-rex-v0.26.1 (Eethash, Autolykos2 - LHR 100% unlock (except 3080 12GB and 3050). LHR unlocker requires 510.xx NVIDIA drivers)


Miners update
- gminer-v2.92 (LHR 100% Unlock. Unlocker requirements: driver 510.xx, root privileges)
- lolminer-v1.50-beta (100% LHR unlock for all LHR affected algorithms on LHR v1 and v2 GPUs. Required drivers: 510.60.02 or 510.68. On other drivers the previous 79% unlock on Ethash will be active. Miner needs admin / root privileges to unlock the cards. The miner will unlock the cards approximately 30 seconds after start. Please make sure all OC operations are completed before. On dual mining the LHR cards will now behave live full hash rate cards. This means dual mining tuning will start approximately 1 Minute after the DAG build is completed)

[tymeksm]

Miners update
- bzminer-v9.1.3 (Much more stable 100% LHR Unlock v1! (supported on drivers 465-511). LHR Unlock stability adjuster --lhr_stability. Lower value is more stable. Added Auto fan control --oc_fan_speed. New rejected shares watchdog. Added command line option --hide_disabled_devices)
- gminer-v2.94 (fixed performance degradation on FHR cards (appeared in 2.92). Improved performance for LHRv3 GPUs (RTX 3050 and RTX 3080 12GB))
- lolminer-v1.50 (100% LHR unlock on LHR V1 and V2 GPUs for all algos. Requires Nvidia driver 510.x and sudo/administrator privileges! Added experimental LHR v3 unlock to ~90% (3050) and ~92% (3080 12G) (default enables) Use --lhrv3boost 0 to disable the mode and fall back to ~65% unlock. Fixed a bug in 1.49 causing Ergo mining not to start on Nvidia)
- nbminer-nebutech-v41.5 (Ethash add 90% LHR unlocker for 3080 12G & 3050. Ergo add LHR unlocker support. Ethash LHR unlocker improve stability)

[tymeksm]

Miners update
- gminer-v2.95 (90% LHR unlock for LHRv3 GPUs (3050 and 3080 12GB). Removed Tor and Aeternity algo. Decreased miner binary size (-15-20 MB))

[DragonFlight]

Is there a way to change Performance State (P0 state) in simplemining?