ZCASH / ZEC Suprnova Pool Stratum enabled: https://zec.suprnova.cc [PPLNS]

[ocminer]

Wow seems I totally forgot to post a link here

However, the Pool is here:

https://zec.suprnova.cc

- Vardiff
- Full stratum support
- Dedicated ASIA, EU and US nodes
- 1 % fee
- Instant support @ IRC, Twitter or Mail
- DDoS protected

Miners and Instructions are on the Getting Started Page, test everything, once we switch to mainnet you can just leave everything like it is.

[1715587863]

1715587863

[1715587863]

1715587863

[1715587863]

1715587863

[1715587863]

1715587863

[1715587863]

1715587863

[1715587863]

1715587863

[ocminer]

Revised Getting Started Page:

https://zec.suprnova.cc/index.php?page=gettingstarted

[loremipsum]

Revised Getting Started Page:

https://zec.suprnova.cc/index.php?page=gettingstarted

How often is the zec@supernova website updated? I've been test mining for 10 min but it still shows 0 H/s for my worker

Thanks!

[ocminer]

Revised Getting Started Page:

https://zec.suprnova.cc/index.php?page=gettingstarted

How often is the zec@supernova website updated? I've been test mining for 10 min but it still shows 0 H/s for my worker

Thanks!

Every 10 seconds, you should see your hashrate almost instantly, make sure you're using the right username.worker/password combo.

Which miner are you using ? nheqminer is much, much faster than the zcash standalone miner

[loremipsum]

Revised Getting Started Page:

https://zec.suprnova.cc/index.php?page=gettingstarted

How often is the zec@supernova website updated? I've been test mining for 10 min but it still shows 0 H/s for my worker

Thanks!

Every 10 seconds, you should see your hashrate almost instantly, make sure you're using the right username.worker/password combo.

Which miner are you using ? nheqminer is much, much faster than the zcash standalone miner

I just realised Im pointing my miner to zec.coinmine.pl:7007
I changed it now and its working fine thanks!

[ocminer]

Revised Getting Started Page:

https://zec.suprnova.cc/index.php?page=gettingstarted

How often is the zec@supernova website updated? I've been test mining for 10 min but it still shows 0 H/s for my worker

Thanks!

Every 10 seconds, you should see your hashrate almost instantly, make sure you're using the right username.worker/password combo.

Which miner are you using ? nheqminer is much, much faster than the zcash standalone miner

I just realised Im pointing my miner to zec.coinmine.pl:7007
I changed it now and its working fine thanks!

Glad you got it working

[Emerge]

Code:

[2016-10-23 15:39:39.176950][0x000031fc]: Speed [300 sec]: 1.92 H/s, 3.56667 Sol/s
emerge.emerge	7.76	1.96

Got this on my craptop.
Think I'll be mining using my CPU miner for this coin

[ocminer]

Miners:

https://github.com/ocminer/nheqminer (soon with GPU + CPU support)


OPENCL GPU (single card only currently):
https://bitcointalk.org/index.php?topic=1661160.0

[ocminer]

Asia Pacific Node Added:

zec-apac.suprnova.cc:2142

let me know how your ping

EU & US node:

zec.suprnova.cc:2142

[loremipsum]

Just to clarify is Hashes/sec = Solutions/sec? I saw a post that was suggesting this but another was saying that Hashes/sec is half of Solutions/sec
Thanks

[ocminer]

Just to clarify is Hashes/sec = Solutions/sec? I saw a post that was suggesting this but another was saying that Hashes/sec is half of Solutions/sec
Thanks

Yes, correct. However I have a feeling that will change something later.. I'm open for suggestions and will adapt when necessary.

[Emerge]

Just to clarify is Hashes/sec = Solutions/sec? I saw a post that was suggesting this but another was saying that Hashes/sec is half of Solutions/sec
Thanks

Yes, correct. However I have a feeling that will change something later.. I'm open for suggestions and will adapt when necessary.

Do you have a link to the GPU Miner? Or does the Nicehash miner include GPU already?

[ocminer]

Just to clarify is Hashes/sec = Solutions/sec? I saw a post that was suggesting this but another was saying that Hashes/sec is half of Solutions/sec
Thanks

Yes, correct. However I have a feeling that will change something later.. I'm open for suggestions and will adapt when necessary.

Do you have a link to the GPU Miner? Or does the Nicehash miner include GPU already?

Soon (tm)

[cointrader83]

Hi OC!

My CPU windows miner from your pool is crashing when I started:

./nheqminer -l zec.suprnova.cc:2142 -u XXX.Worker1 -p password -t 4

[ocminer]

Hi OC!

My CPU windows miner from your pool is crashing when I started:

./nheqminer -l zec.suprnova.cc:2142 -u XXX.Worker1 -p password -t 4

Hmm looks good to me, make sure your worker and password are correct

[cointrader83]

Sorry, downloaded nheqminerSSE2 and works!

[ocminer]

Sorry, downloaded nheqminerSSE2 and works!

Ah, great, have fun mining!

[ocminer]

Now CPU + GPU miner available (Windows):

https://github.com/ocminer/nheqminer/releases/tag/0.2a

[orionpaxx12]

is there an example of a bat file cant seem to get the miner started this is what i have

nheqminer -l -cd 0 zec.suprnova.cc:2142 -u worker.1 -p x -t 0 -h
pause

thanks in advance

[ocminer]

is there an example of a bat file cant seem to get the miner started this is what i have

nheqminer -l -cd 0 zec.suprnova.cc:2142 -u worker.1 -p x -t 0 -h
pause

thanks in advance

You can remove the pool,  so just :

nheqminer -l -cd 0 -u worker.1 -p x -t 0 -h
pause

[ivan1975]

with -cd -t 0 (GPU only) I get 0 sols/s:

What is wrong?
GTX 970, driver 375.63.

[ocminer]

with -cd -t 0 (GPU only) I get 0 sols/s:

What is wrong?
GTX 970, driver 375.63.

Seems it doesn't recognize your GPU.. Run it with "-ci" to get cuda info

[ivan1975]

Now I get:

[ocminer]

Now I get:

Should work, run with -cd 0 -t 0

[ivan1975]

Should work, run with -cd 0 -t 0

Many thanks.
With -cd 0 works now.

[glax1983]

Is there miner for AMD cards?

[ocminer]

Is there miner for AMD cards?

not yet, hopefully soon

[orionpaxx12]

is there an example of a bat file cant seem to get the miner started this is what i have

nheqminer -l -cd 0 zec.suprnova.cc:2142 -u worker.1 -p x -t 0 -h
pause

thanks in advance

You can remove the pool,  so just :

nheqminer -l -cd 0 -u worker.1 -p x -t 0 -h
pause

ok cool i will give it a shot

[orionpaxx12]

yeah unfortunately its saying no such host known

[ocminer]

run without "-l" like so:

nheqminer  -u worker.1 -p x

[orionpaxx12]

run without "-l" like so:

nheqminer  -u worker.1 -p x

got it awesome thanks love suprnova by the way

[ocminer]

run without "-l" like so:

nheqminer  -u worker.1 -p x

got it awesome thanks love suprnova by the way

thanks ! glad you got it working and great to have you on the pool !

[orionpaxx12]

this miner is running really good on my 1060 and 1070, now just need stratum for the amd cards and will be good to go

[orionpaxx12]

run without "-l" like so:

nheqminer  -u worker.1 -p x

got it awesome thanks love suprnova by the way

thanks ! glad you got it working and great to have you on the pool !

you are welcome i am new to mining literally a few months, and used a lot of pools learning and such but i find suprnova to be my top pools to use i highly recommend them to everyone

one question though, i got my testnet wallet up in linux but when i try to add it to the pool it say not a valid address just curios what i might have done wrong, cause i use the same z-addr with faucet and get a few coins so i dont think i messed the wallet up some how lol

[ocminer]

run without "-l" like so:

nheqminer  -u worker.1 -p x

got it awesome thanks love suprnova by the way

thanks ! glad you got it working and great to have you on the pool !

you are welcome i am new to mining literally a few months, and used a lot of pools learning and such but i find suprnova to be my top pools to use i highly recommend them to everyone

one question though, i got my testnet wallet up in linux but when i try to add it to the pool it say not a valid address just curios what i might have done wrong, cause i use the same z-addr with faucet and get a few coins so i dont think i messed the wallet up some how lol

Currently only t-addr are allowed for withdrawals because z-addr are not traceable ... so when a failed payment happens, I cannot tell where it went from the poolside.

[ocminer]

The pool will auto-change from testnet to real zcash at launch?

yes, you can keep your miners connected

[glax1983]

The pool will auto-change from testnet to real zcash at launch?

yes, you can keep your miners connected

any ETA for AMD cards miner? Do you know when tomorrow will be switch to mainnet?
I hope I wan't be too late for the party.
But as I understand, block reward goes from 0 to full reward in cca 8 days time. Right ocminer?

[ocminer]

nheqminer -u WebLogin.Worker -p password -t 4 For CPU, right?

yes, you can leave -t 4 away as well

[orionpaxx12]

run without "-l" like so:

nheqminer  -u worker.1 -p x

got it awesome thanks love suprnova by the way

thanks ! glad you got it working and great to have you on the pool !

you are welcome i am new to mining literally a few months, and used a lot of pools learning and such but i find suprnova to be my top pools to use i highly recommend them to everyone

one question though, i got my testnet wallet up in linux but when i try to add it to the pool it say not a valid address just curios what i might have done wrong, cause i use the same z-addr with faucet and get a few coins so i dont think i messed the wallet up some how lol

Currently only t-addr are allowed for withdrawals because z-addr are not traceable ... so when a failed payment happens, I cannot tell where it went from the poolside.

ok i understand i tried both types of adddress i will figure it out i must have done something wrong with my wallet not really used to linux

[ocminer]

The pool will auto-change from testnet to real zcash at launch?

yes, you can keep your miners connected

any ETA for AMD cards miner? Do you know when tomorrow will be switch to mainnet?
I hope I wan't be too late for the party.
But as I understand, block reward goes from 0 to full reward in cca 8 days time. Right ocminer?

should be released today.

mainnet launch is planned for tomorrow, no time known

[orionpaxx12]

28-29 sols on my 1070





17-18 sols with my 1060

stratum miner is way faster thanks

[infofront]

So if I turn on my miners when I leave for work in the morning (before launch), will they automatically mine on the mainnet at launch?

[ocminer]

So if I turn on my miners when I leave for work in the morning (before launch), will they automatically mine on the mainnet at launch?

Yes, of course you can leave everything like it is, no ports will change

[vindyne8]

So if I turn on my miners when I leave for work in the morning (before launch), will they automatically mine on the mainnet at launch?

Yes, of course you can leave everything like it is, no ports will change

Strong work as always ocminer!

[orionpaxx12]

was trying to get the opencl miner that geniol compiled for windows on the getting started page,cause i want all of my hardware pointed a suprnova but it wouldnt launch, no errors just nothing, crashes lol

here is my command line maybe there is something out of place

genoil.exe -c zec.suprnova.cc:2142 -u kojiren77.6 -p x -P 0 -g 0 1 -i 13
pause

sorry about all the questions, thanks for the help in advance

[glax1983]

ocminer what about AMD miner? Do you know when when is start?

[yslyung]

ocminer what about AMD miner? Do you know when when is start?

yeah OP, AMD please, looks like nh have been playing around with it according to their tweet.

much thx & looking fwd to point some hashes at suprnova soon.

[Gaglam]

was trying to get the opencl miner that geniol compiled for windows on the getting started page,cause i want all of my hardware pointed a suprnova but it wouldnt launch, no errors just nothing, crashes lol

here is my command line maybe there is something out of place

genoil.exe -c zec.suprnova.cc:2142 -u kojiren77.6 -p x -P 0 -g 0 1 -i 13
pause

sorry about all the questions, thanks for the help in advance

Same here, crashs from the start

zec#0 loading binary kernels/cache/zec-Tahiti-128.bin

There is no such file in the directory

[orionpaxx12]

was trying to get the opencl miner that geniol compiled for windows on the getting started page,cause i want all of my hardware pointed a suprnova but it wouldnt launch, no errors just nothing, crashes lol

here is my command line maybe there is something out of place

genoil.exe -c zec.suprnova.cc:2142 -u kojiren77.6 -p x -P 0 -g 0 1 -i 13
pause

sorry about all the questions, thanks for the help in advance

Same here, crashs from the start

zec#0 loading binary kernels/cache/zec-Tahiti-128.bin

There is no such file in the directory

yeah i dont know but i realy wish i could get all my cards to point to suprnova maybe i will figure out this genoil version, no luck yet, same issue

[Gaglam]

Yeah, this .bin is surely missing

Using OpenCL platform: AMD Accelerated Parallel Processing
gpu#0: Tahiti
gpu#1: Tahiti
gpu#2: Tahiti
gpu#3: Tahiti
gpu#4: Tahiti
zec#0 loading binary kernels/cache/zec-Tahiti-128.bin
zec#0 loading binary kernels/cache/zec-Tahiti-128.bin
zec#1 loading binary kernels/cache/zec-Tahiti-128.bin
zec#1 loading binary kernels/cache/zec-Tahiti-128.bin
zec#2 loading binary kernels/cache/zec-Tahiti-128.bin
zec#2 loading binary kernels/cache/zec-Tahiti-128.bin
zec#3 loading binary kernels/cache/zec-Tahiti-128.bin
zec#3 loading binary kernels/cache/zec-Tahiti-128.bin
zec#4 loading binary kernels/cache/zec-Tahiti-128.bin
zec#0: 0.0S/s   zec#1: 0.0S/s   zec#4 loading binary kernels/cache/zec-Tahiti-128.bin

[orionpaxx12]

Yeah, this .bin is surely missing

Using OpenCL platform: AMD Accelerated Parallel Processing
gpu#0: Tahiti
gpu#1: Tahiti
gpu#2: Tahiti
gpu#3: Tahiti
gpu#4: Tahiti
zec#0 loading binary kernels/cache/zec-Tahiti-128.bin
zec#0 loading binary kernels/cache/zec-Tahiti-128.bin
zec#1 loading binary kernels/cache/zec-Tahiti-128.bin
zec#1 loading binary kernels/cache/zec-Tahiti-128.bin
zec#2 loading binary kernels/cache/zec-Tahiti-128.bin
zec#2 loading binary kernels/cache/zec-Tahiti-128.bin
zec#3 loading binary kernels/cache/zec-Tahiti-128.bin
zec#3 loading binary kernels/cache/zec-Tahiti-128.bin
zec#4 loading binary kernels/cache/zec-Tahiti-128.bin
zec#0: 0.0S/s   zec#1: 0.0S/s   zec#4 loading binary kernels/cache/zec-Tahiti-128.bin

mine doesnt even do that, like in the pick just nothing lol, can i see your bat file, maybe i dont have my config right, thanks in advance

[Gaglam]

Dont start the bat file.

copy the line from the .bat file into your dos prompt and hit enter

[orionpaxx12]

Dont start the bat file.

copy the line from the .bat file into your dos prompt and hit enter

yeah not sure how to do that, i have learned alot but still new to some things lol, just in case here is what i did, i opened command prompt and copy and pasted what was in the bat file in the prompt window and hit enter, this is what i got

[krile]

What is up with the countdown?

Do we have an accurate launch time?

https://zec.suprnova.cc/

edit: nevermind, it was fake

[orionpaxx12]

https://www.youtube.com/watch?v=O8QA6Nvg8RI&feature=youtu.be

LIVE ZCASH LAUNCH

[t2yax]

dear ocminer please open payouts

[not.you]

worker not authorized....

website unusable...

meanwhile ZEC is trading for an obscene amount

[t2yax]

ocminer please become online and give some info at here or z.cash forum .. please ..

[t2yax]

god damn .. 0.01 zec withdraw is so biggg .. at polo peeps seling 0.00025 kamoon. reduce it to 0.001 pls..

edit:its now 0.001 zec,thanks ocminer.but we cant reach the site

[t2yax]

omg .. you making this job for years ocminer ..

how can you have a worse server like that ??

shame ..

[not.you]

Well this is a bummer.  I could have used 5 or 6 BTC which is about what the ZEC I already mined was worth 10 minutes ago.  Already down to like 1 BTC and no doubt much much less by the time I actually get anything to the exchange. 

I kind of wish I had just mined direct to nicehash now.

[zuldarrs]

omg .. you making this job for years ocminer ..

how can you have a worse server like that ??

shame ..

This was obviously planned..

[t2yax]

I didn't make an autopayment on my account and a didnt set the withdrawal address

This. Who had the time to register a valid mainnest address in the 1h window before the go-live and Suprnova's outage?

this is the quote from forum z.cash a conversation of 2 guys

really who had time to register a valid mainnet adress ? plus when most of miners are mining from windows and doesnt have windows wallet ?

[Daveeoff]

What ???Sorry for the inconvenience but we’re performing some maintenance at the moment. If you need to you can always contact us on admin AT suprnova.cc

[not.you]

I didn't make an autopayment on my account and a didnt set the withdrawal address

This. Who had the time to register a valid mainnest address in the 1h window before the go-live and Suprnova's outage?

this is the quote from forum z.cash a conversation of 2 guys

really who had time to register a valid mainnet adress ? plus when most of miners are mining from windows and doesnt have windows wallet ?

I did actually but the minimum payout was .01.  I was about half way to that when the pool went completely tits up but I was just finishing ramping up my whole mine.  I had only been checking it out to see if it was worth my time.  So when I saw that it was and went and turned everything up the pool website died completely.  I am turning everything elsewhere now.

EDIT: The website was up for a minute, I logged in and it showed my balance as 0.  Hmm...  Back down again now apparently.

[t2yax]

i received payment to my poloniex wallet.but that downtime was affected a lot.

[not.you]

How did you get payout? It says on the website that payouts are disabled and my payout address and threshold were both deleted from my settings.

[t2yax]

How did you get payout? It says on the website that payouts are disabled and my payout address and threshold were both deleted from my settings.

I placed after adding adress.and ocminer processed i think

[not.you]

And the site is down again...

[Daveeoff]

What a mess I should have set up on a better pool we are loosing out bigtime

[molitar]

Not sure if any other pool is better or not.   Nicehash has some really weird zcash rewards.. they seem to be fucked up to me.

Code:

t1KcKu3ADFrMDD7PTZMrazkpy1mwRpfvx6A 	5120 	0 	100% 	0.0097778 	0.00567132 	273.07 S
t1Q7fPtwrRTaT4XjbH1Gryaj3cyv6XH8159 	268374 	256 	99.9% 	0.00550391 	0 	13.98 kS
t1SRvMC1986tc7VV6RKvRuSFJEzdXkRqcEJ 	10734 	70 	99.34% 	0.00297535 	0.00157517 	572.52 S
t1dgt2xBWh9s3zQw5U5JAMycyUyBRNs67VZ 	152 	0 	100% 	0.00243627 	0.00247775 	8.11 S
t1aayCdxghMsbHTMYZqLrR8jWgFhdiCnDbY 	327 	0 	100% 	0.00241847 	0.00321394 	17.49 S
t1Vo5WEChJ4K4GAsqH5K5GBRYcYB1vkQKyX 	13055 	97 	99.25% 	0.00236694 	0.0027355 	696.30 S
t1JTsuc8kpMHYv7cQnEXo5on49ttqBiWgE7 	15627 	78 	99.5% 	0.00234175 	0.00889666 	833.48 S
t1MgALuxieuBAfSTkCfHpjMwNzNmggUk6MV 	12690 	197 	98.46% 	0.00206751 	0.01668685 	676.81 S
t1N7jj7wZh242hmHU9w4EqBJdVGkbMEKJka 	5358 	0 	100% 	0.0020313 	0.0023275 	285.79 S
t1YPfLh2qc4TYiCoNnnRc2ieHSdYjqCnvVH 	5831 	0 	100% 	0.00198837 	0.00248691 	311.01 S
t1NyZHijLQbogBKPNKhDJ85iajSXRUuSfzq 	9680 	126 	98.7% 	0.00184548 	0.00179756 	516.29 S
t1T769BrB3J7PbPJqcQ4CUt4d6AynTmJCr2 	8526 	55 	99.35% 	0.00183651 	0.00195129 	454.75 S
t1eit7ynof6Ex3yU6UibSzRYP6eC8PqC6sq 	13049 	85 	99.35% 	0.00174964 	0.00139921 	695.98 S
t1QviDTMNWVYbfM5PduChCapHRduWP6T8sG 	7557 	57 	99.24% 	0.00159639 	0.01480361 	403.09 S
t1VFakJV3VaLVGpda2NT2ktZFYNJt47G1xs 	8188 	17 	99.78% 	0.00136122 	0.00358878 	436.71 S
t1Qjj3ya2xaSNZNwM56dBa3EqkorCLyfNFn 	4220 	0 	100% 	0.00135136 	0.00645196 	225.09 S
t1bag7AC7y4k5RsXMhsA7M4aU67ekcfy2jZ 	1596 	0 	100% 	0.00132676 	0.00160788 	85.16 S
t1NJSCz5nT9LvTiCZQqBdwdbM84Yzs6f9tX 	1732 	0 	100% 	0.0012423 	0.00591967 	92.40 S
t1Ref5knVH7zFwRFQN8ZBfLJSXiiyAKbWez 	10329 	53 	99.48% 	0.00122917 	0.00528063 	550.90 S
t1VQziTkkcsCtbCZcebWDe8GjUoXhEmMy1j 	7382 	0 	100% 	0.00121132 	0.00104446 	393.72 S
t1TkHebUTyssB71upkMuqHPWo2SAwHvWPpw 	7067 	0 	100% 	0.00117182 	0.00154095 	376.93 S

How can the shares be so different for rewards?  It really does not seem to make sense.

[PovertyByte]

I set up my batch file appropriately and with the windows based miner, it does not work.

Does Zcash not allow 1st gen i7 CPU's, non AES CPU's?

[Biodom]

worker not authorized....

website unusable...

meanwhile ZEC is trading for an obscene amount

yeah, none of anything zec works for me too

[Raja_MBZ]

May I ask the minimum withdrawal amount of your pool and the duration of it's processing? Your pool seems better than others, as of now.

[ocminer]

May I ask the minimum withdrawal amount of your pool and the duration of it's processing? Your pool seems better than others, as of now.

Sure:

Min withdrawal: 0.001
Fee: 1% and withdrawal fee 0.0001

111 blocks for confirmation of payments (will lower that to 100 soon)


Payments are now fully automatic again on suprnova, pool's frontend is a bit slow but will be faster as soon as the new server is ready, probably monday.

[Raja_MBZ]

May I ask the minimum withdrawal amount of your pool and the duration of it's processing? Your pool seems better than others, as of now.

Sure:

Min withdrawal: 0.001
Fee: 1% and withdrawal fee 0.0001

111 blocks for confirmation of payments (will lower that to 100 soon)


Payments are now fully automatic again on suprnova, pool's frontend is a bit slow but will be faster as soon as the new server is ready, probably monday.

That all looks nice but how can I use my GPU's with this miner?

"Windows Version of Nicehash CPU+GPU Miner with Suprnova support"

It's in your getting started page. Is there any command to use the GPU's?

[ocminer]

May I ask the minimum withdrawal amount of your pool and the duration of it's processing? Your pool seems better than others, as of now.

Sure:

Min withdrawal: 0.001
Fee: 1% and withdrawal fee 0.0001

111 blocks for confirmation of payments (will lower that to 100 soon)


Payments are now fully automatic again on suprnova, pool's frontend is a bit slow but will be faster as soon as the new server is ready, probably monday.

That all looks nice but how can I use my GPU's with this miner?

"Windows Version of Nicehash CPU+GPU Miner with Suprnova support"

It's in your getting started page. Is there any command to use the GPU's?

Its very easy, just download the miner and start it with

nheqminer.exe -h

[orionpaxx12]

hey i would like to switch completly to suprnova but cant get genoils miner to work at all tried everything i can only get my cpu and nvidia cards to work on your pool which is great but problem is i have more amd cards than i do anything eles any kind of help would be awesome suprnova rocks

[molitar]

Thanks Supr!  I quit that scammer pool Nicehash!  That A**(*(* is keeping his payout at .01 so everyone will quit and he gets to keep there earnings!  Not only that I think he is a damn cheater as I already have .0001 in less than 10 minutes on your pool.  Nice hash has taken me over 24 hours to get to .002 on his pool.  I know before I went to sleep last night it showed more than that but when I woke up it had less in both confirmed and unconfirmed.   That person is a big scam!  I really wish you had yours up yesterday when I first setup I lost a lot of profit because of that A*#$%%#!

[ocminer]

hey i would like to switch completly to suprnova but cant get genoils miner to work at all tried everything i can only get my cpu and nvidia cards to work on your pool which is great but problem is i have more amd cards than i do anything eles any kind of help would be awesome suprnova rocks

Thanks for your trust, if you are on windows, you can use nheqminer v0.3a from here:

https://github.com/ocminer/nheqminer/releases

If not, genoil is currently testing new version, you might want to read up here:

https://forum.z.cash/t/genoils-zec-miner/3791/27

[Prelektro]

I requested manual payment more than 24 hours ago still didn't receive anything. Like it wasn't enough that your pool overcharged me (or more like stole from me) with tx fee of 0.0005 (which was 0.0001 an hour ago so i didn't realise that before requesting manual payment). I emailed, filled support page on pool, wrote to suprnova discussion on zcash forums etc. Yet no response, nothing. All I got is that op id : opid-0040af15-b2e3-4780-b640-4880a62fd398, which is useless since i don't have linux wallet and can't use that on zchain explorer. In the meantime, coins lost all their value. Worst pool mining experience ever.

[orionpaxx12]

hey i would like to switch completly to suprnova but cant get genoils miner to work at all tried everything i can only get my cpu and nvidia cards to work on your pool which is great but problem is i have more amd cards than i do anything eles any kind of help would be awesome suprnova rocks

Thanks for your trust, if you are on windows, you can use nheqminer v0.3a from here:

https://github.com/ocminer/nheqminer/releases

If not, genoil is currently testing new version, you might want to read up here:

https://forum.z.cash/t/genoils-zec-miner/3791/27

you are welcome, and yes i am on win 7, always liked suprnova, zec got off to a rocky start on most pools, but i use supr for all my mining, i will give genoil miner a shot again but no luck so far but if nothing else i will use the miner i have for cpu and nvidia just would be nice to be all on the same pool thanks for the links and all the help

[ocminer]

I requested manual payment more than 24 hours ago still didn't receive anything. Like it wasn't enough that your pool overcharged me (or more like stole from me) with tx fee of 0.0005 (which was 0.0001 an hour ago so i didn't realise that before requesting manual payment). I emailed, filled support page on pool, wrote to suprnova discussion on zcash forums etc. Yet no response, nothing. All I got is that op id : opid-0040af15-b2e3-4780-b640-4880a62fd398, which is useless since i don't have linux wallet and can't use that on zchain explorer. In the meantime, coins lost all their value. Worst pool mining experience ever.

Sorry for your bad experience on the pool, i've just checked that payment and reacreddited it to your account.

As with new technologies, coins, there are always unpredictable problems which can't be foreseen. I've tested this coin a lot and very early on testnet and mining was optimized through all stages, however, since this testnet coins didn't have any value at all, transactions were only very minimalistic tested.. Like 1-2 transactions per hour.. Since mainnet launched, I see over 1000 transactions/withdrawals per hour and due to the nature of the coin (anonymous function) it's not as easy as regular bitcoin payments so a lot of those transactions failed until I could fix it about 12h after launch.

I've had far over 1000 Mails, Tweets and notification in IRC/Slack and I'm now finally at the rest of them so I'm still very sorry that I must have missed yours somehow, next time just join Slack/IRC or post here and I'll try to be as quick as possible.

[Raja_MBZ]

May I ask the minimum withdrawal amount of your pool and the duration of it's processing? Your pool seems better than others, as of now.

Sure:

Min withdrawal: 0.001
Fee: 1% and withdrawal fee 0.0001

111 blocks for confirmation of payments (will lower that to 100 soon)


Payments are now fully automatic again on suprnova, pool's frontend is a bit slow but will be faster as soon as the new server is ready, probably monday.

That all looks nice but how can I use my GPU's with this miner?

"Windows Version of Nicehash CPU+GPU Miner with Suprnova support"

It's in your getting started page. Is there any command to use the GPU's?

Its very easy, just download the miner and start it with

nheqminer.exe -h

Well I was not using -od command that time, and now using it so everything's running perfect. Already received a payment too to my Poloniex!

[Prelektro]

i've just checked that payment and reacreddited it to your account.

I only got credit_pps amount back, didn't get high txfee back.

[orionpaxx12]

yeah i gave it a shot i can mine with cpu-gpu on supr with my nvidia cards with v0.2a wont even start with v0.3a or genoil, so half my rigs are pointed at supr the other half at nicehash cause there is no working amd miner at least for me there is not, i was using extremals ver. zcashclient but it wont even connect there now and plus i refuse to use that coins for all pool ever again but i thought i would try just to see, thanks for your help ocminer when there is a fully functional miner i will mine completely on supr, thanks again

P.S. this is what i get with v0.3a


C:\Users\MINING RIG 1\Downloads\nheqminer_v0.3a_suprnova>nheqminer.exe -cd 0 -u
kojiren77.1 -p x -t 7
'nheqminer.exe' is not recognized as an internal or external command,
operable program or batch file.

C:\Users\MINING RIG 1\Downloads\nheqminer_v0.3a_suprnova>pause
Press any key to continue . . .

[t2yax]

What are the differences between nheqminer v0.2 and v0.3? I'm the only mine in the CPU, which is the most suitable?

0.3a contains slightly better solve rate for cuda gpus(mobile gpu's doesnt work)and initial opencl support for amd cards.

[Emerge]

Yep. I realized mobile GPUs don't work.
Apparently, When I use the solver, it gives me up to 4000 H/s but no Sols

Had my hopes high

[molitar]

Very nice.. already earned almost .002 in 12 hours. Lot more realistic to what I should be getting. Already got payment already also.

[bandarfjb]

Site is maintenance, but mining still running right?

[not.you]

Well I have to say, after a pretty crappy start yesterday this pool actually shaped up to be one of the better ones.  The nicehash pool looks to have been a straight up theft of all mining hashrate and their daemon was horked up for a while so the pool didn't even find blocks for many hours due to that (I ended up sending them some free hash in that time).  The miningpoolhub pool shut down very early on since they couldn't get the thing stable.  I heard people saying that coinsforall.io wasn't paying at all either.  I did get a couple payouts from suprnova while the price was still stupid (but far less than how stupid it started) so that was something.  I ended up pointing everything back here for now.

[Klarisskin]

Is there a win32 GPU miner for zec.suprnova? coinsforall's zcashclient works nicely on a win32 system. Would be nice to have a win32 miner for suprnova, too.  

P.S.: And big thanks to ocminer for a great service, as always. Your pool is the best again. All my 64-bit workers are on your pool.

[Bojcha]

Too much invalid with GPU mining.
switched to other pool and now much better.

[satanly]

Hi, how long does it takes for one transaction? I did a manual cash out 1 hour ago and still nothing on my poloniex.

TX is opid-b9e1e76c-10e6-4fde-89bb-95663474e89f and block n/a but what does it means?

Please help.
Thanks

[majestymage]

well i wait for a payment for about 4 hours now...hm...i managed to get 0.1 still no payment

[majestymage]

all of you miners miss this moment(and not get your payments) or is just me?  

[molitar]

Nope been getting my payments but the nheqminer_suprnova.exe is reporting unauthorized worker?  What is wrong?

nm.. I had to delete the old .bin when it started acting up.. I'm authorized again.

Question though why is the site so slow?

[majestymage]

when was your last payment?

[molitar]

No problem with payments here.. here is part of my 11/1 transactions.

24844279    2016-11-01 01:59:11    Fee    Unconfirmed          2426    0.00000044
24844273    2016-11-01 01:59:11    Credit    Unconfirmed          2426    0.00004406
24799855    2016-11-01 01:47:54    Fee    Unconfirmed          2420    0.00000044
24799849    2016-11-01 01:47:54    Credit    Unconfirmed          2420    0.00004361
24755911    2016-11-01 01:39:24    Fee    Unconfirmed          2418    0.00000078
24755905    2016-11-01 01:39:24    Credit    Unconfirmed          2418    0.00007841
24705889    2016-11-01 01:10:24    Fee    Unconfirmed          2413    0.00000039
24705883    2016-11-01 01:10:24    Credit    Unconfirmed          2413    0.00003928
24662341    2016-11-01 01:03:22    Fee    Unconfirmed          2411    0.00000086
24662335    2016-11-01 01:03:22    Credit    Unconfirmed          2411    0.00008611


Serious damn problem though Suprnova needs to find someone else to make a working pool miner as nheqminer sucks for performance on AMD and genoil will not damn well stay connected!  If someone does not fix this issue I will have to move to coinsforall as they are the ONLY other pool with a different miner than genoil or crappy nheqminer.

[majestymage]

well i hit 0.3 zec and no payments..well..when the price droped from 3.3 btc/zec to 1.8 i recieved my funds...and i still have 1 payment from the first day that never arived

[molitar]

well i hit 0.3 zec and no payments..well..when the price droped from 3.3 btc/zec to 1.8 i recieved my funds...and i still have 1 payment from the first day that never arived

Are you using a wallet that starts with Z?  Seems there is a bug with these and the payments are as slow as 4-6 hours.  I am using a t wallet on Poloniex.  Just hold your coin to it goes up again it started at .7 and than within 20 minutes it jumped up over 3 BTC.  It's really fluctuating.

[paramind22]

Is this pool down?  I haven't been able to load it for the last 3 hours.

This site can’t be reached

www.zec.suprnova.com’s server DNS address could not be found.

I cleared host cache and it's the only site I see listed still there.

[molitar]

Is this pool down?  I haven't been able to load it for the last 3 hours.

This site can’t be reached

www.zec.suprnova.com’s server DNS address could not be found.

I cleared host cache and it's the only site I see listed still there.

you have url all wrong. https://zec.suprnova.cc

[paramind22]

Is this pool down?  I haven't been able to load it for the last 3 hours.

This site can’t be reached

www.zec.suprnova.com’s server DNS address could not be found.

I cleared host cache and it's the only site I see listed still there.

you have url all wrong. https://zec.suprnova.cc

Thanks, was just following a youtube link.

[majestymage]

well i hit 0.3 zec and no payments..well..when the price droped from 3.3 btc/zec to 1.8 i recieved my funds...and i still have 1 payment from the first day that never arived

Are you using a wallet that starts with Z?  Seems there is a bug with these and the payments are as slow as 4-6 hours.  I am using a t wallet on Poloniex.  Just hold your coin to it goes up again it started at .7 and than within 20 minutes it jumped up over 3 BTC.  It's really fluctuating.

nop...is a t polo adress

[kapsel]

I have 0.02 zec stuck at a pool, should i send an email anywhere about this, or is someone already taking care of it ? I can't tell because when loading the pool i only receive information that there's a site maintenance going on.

[majestymage]

i have around 0.5 zec CONFIRMED and about as much unconfirmed...if i will not recieve it in a few hours i will make a scam acusation !

[giagge]

Suprnova write:
All stuck payments are being processed manually - reindexing/resyncing the wallet currently

I have SOME payment to send in transaction , but dont show anything on poloniex , when send all payment and when fix this problem ? .

Cmon pls .

[majestymage]

i also have the same problem...very pised that a 0.69 zec transaction did not arive but a 0.01 did 

[Raja_MBZ]

The website seems pretty too much slow, takes forever to load. Kindly solve this and some above given problems soon.

[giagge]

Cut off the fee for 1 day ocminer , one present for the issue with accredited payment and more disconnecting .

[paramind22]

I have had an account at Suprnova for a few weeks now and set up a worker, and using the script:

nheqminer stratum+tcp://zec-eu.suprnova.cc:2142 -u paramind22.paramind -p myrealpasswordhere t 4

but it says "not authorized."

Any ideas why?

[giagge]

Use this :

nheqminer -u paramind22.paramind -p myrealpasswordhere -t 4

.

[paramind22]

Use this :

nheqminer -u paramind22.paramind -p myrealpasswordhere -t 4

.

I do get the same error, "worker not authorized."  I don't understand how the miner knows what URL to mine to unless it's hard coded.
I notice the pool total hashrate for ZEC is zero right now.

[ocminer]

Website has been updates today, shouldn't time out anymore and no maintenance page. Worker not authorized is a known worker bug, you need to restart the worker until it shows 'Authorized Worker  xxx'  directly after launch.

Don't worry, there will be lots of promo soon

[orionpaxx12]

finally got a genoil zec-miner 0.5 to work with my amd cards kind of buggy but at least i am on supr looking forward to updates or a claymore ver. thanks for all the hard work @ocminer

[paramind22]

Use this :

nheqminer -u paramind22.paramind -p myrealpasswordhere -t 4

.

nheqminer_suprnova needed to be the first item, but thanks, that got it to work.

[ocminer]

Some people are asking for a low diff or static diff port, you can set your diff on any suprnova pool through your password field:

nheqminer -u suprnova.1 -p d=4

Would give your worker a static diff of 4

[penambang]

automatic payment stuck again, ocminer?

[ocminer]

automatic payment stuck again, ocminer?

Not stuck, but there are so many manual payments in queue all the time that there is no space left for the automatic

You can just do a manual payout and it should hit your wallet in a matter of 10 mins

[Emerge]

automatic payment stuck again, ocminer?

Not stuck, but there are so many manual payments in queue all the time that there is no space left for the automatic

You can just do a manual payout and it should hit your wallet in a matter of 10 mins

Hey man. Pool is under maintenance again?
I get the maintenance page

[ocminer]

automatic payment stuck again, ocminer?

Not stuck, but there are so many manual payments in queue all the time that there is no space left for the automatic

You can just do a manual payout and it should hit your wallet in a matter of 10 mins

Hey man. Pool is under maintenance again?
I get the maintenance page

Someone decided to DDoS the frontpage again... it's a pain currently.. I do one step, they do one step...

[paramind22]

Is there a way to make the software run at less than 100 % cpu?  I have two workers aimed at Suprnova, one I do my day job work on and another is a laptop that is running at 75 C all the time.  I did try to lower priority in task manager but that doesn't make a big difference.

[ocminer]

Is there a way to make the software run at less than 100 % cpu?  I have two workers aimed at Suprnova, one I do my day job work on and another is a laptop that is running at 75 C all the time.  I did try to lower priority in task manager but that doesn't make a big difference.

Unfortunately not that I know, maybe you can try to run the miner not on all cores by using the -t option..  If you have 4 cores,  use  -t 3 and it should only run on three

[paramind22]

Is there a way to make the software run at less than 100 % cpu?  I have two workers aimed at Suprnova, one I do my day job work on and another is a laptop that is running at 75 C all the time.  I did try to lower priority in task manager but that doesn't make a big difference.

Unfortunately not that I know, maybe you can try to run the miner not on all cores by using the -t option..  If you have 4 cores,  use  -t 3 and it should only run on three

Thanks, that worked perfectly.

[ocminer]

I've added another webserver today to the load balancer so the site is stable again

I'll optimize caching tomorrow so the initial load will be a lot faster too.


Some people are requesting fixed/static diff ports from me via PM, you can define your own dificulty through your password field like so:


Static Diff 16:

title Miner01
:start
genoil.exe -c zec.suprnova.cc:2142 -u suprnova.9 -p d=16 -i 20 -w 64 -P 1 -f 2 -g 0 1
cls
timeout /T 10
goto start


Static Diff 32:

title Miner01
:start
genoil.exe -c zec.suprnova.cc:2142 -u suprnova.9 -p d=32 -i 20 -w 64 -P 1 -f 2 -g 0 1
cls
timeout /T 10
goto start



Simply set your password field to d=?? whereas "??" is the diff you want.. so for example 10 or 15..

Only full numbers can be used and minimum is 1.

Of course replace "suprnova.9" with your username.workername

have fun testing !

[molitar]

What is the advantage and disadvantage of changing difficulty?

[grendel25]

Manual payouts are not working

[gross]

Waitting for manual payment 

[gross]

Waitting 

[madfox11]

Please fix manual payment

[majestymage]

yup..the payments are stuck...again

[penambang]

I think there is to many request in queue, my autopayment also not working.

Code:

Pool Workers: 12357

[giagge]

Fix manual and auto payout .

[gross]

Payouts are currently stuck due to a crashed wallet and will resume as soon as possible

[ocminer]

All payouts are fixed and go out every 5 mins now.

As a little "thank you" I've dropped all fees on the pool until Sunday.

[grendel25]

All payouts are fixed and go out every 5 mins now.

As a little "thank you" I've dropped all fees on the pool until Sunday.

Awesome.  Thank you.

[Sonatix]

Mining with nheqminer_v0.3a_suprnova
Today im getting Share rejected (unauthorized worker) error. Yesterday was everything good.
stratum+tcp://zec-eu.suprnova.cc:2142 and same for stratum+tcp://zec-eu.suprnova.cc:2143 when i try to mine with nicehash (   Remote pool terminated connection. Trying to reestablish soon.).
I deleted workers and created again, but it change nothing.

This is problem with zec-eu.suprnova, but with zec.suprnova no problems.

[ocminer]

zec-eu.suprnova.cc is often a bit crowded, in case you get that error, just switch to zec.suprnova.cc:2142 and it should be much better.

I've fixed the frontend, it's now triple load balanced and should load almost instantly.

Fees are all 0 until Sunday, happy mining

[yslyung]

pool seems to be more stable now.

thx for the hardwork ocminer.

[ceozero]

the china pool...
unauthorized worker...
 

[ocminer]

the china pool...
unauthorized worker...
 

Yes, already overloaded, wow I did not think so many people will use it, I will add more capacity 

When you restart the worker a few times it will finally work and authorize

[FlexiN]

Hi there,

Someone can show me a .bat file for ZEC mining with new Claymore miner on this pool ??

Thanks.

[ocminer]

Hi there,

Someone can show me a .bat file for ZEC mining with new Claymore miner on this pool ??

Thanks.

Sure, here:


ZecMiner64.exe -zpool zec.suprnova.cc:2142 -zwal YourUsername.YourWorker -zpsw YourWorkerPass -allpools 1

[ocminer]

latest version of nheqminer with bugfixes here:

https://github.com/ocminer/nheqminer/releases/tag/0.4b

[molitar]

Very severe problem with difficulty rate on this pool?  Why does it keep jumping me to extremes killing my mining?

Ok waiting to all showed 0 H/s on Suprnova took about 10+ minutes and restarting my hashing is not stalling.

AMD Cards available: 3
GPU #0: Tahiti, 3072 MB available, 32 compute units
GPU #0 recognized as Radeon 280X/380X
GPU #1: Ellesmere, 8192 MB available, 36 compute units
GPU #1 recognized as Radeon RX 480
GPU #2: Tonga, 4096 MB available, 32 compute units
POOL/SOLO version
Total cards: 3

Code:

Pool sets new share target: 0x0016f260 (diff: 2856H)
ZEC: 11/05/16-12:59:59 - New job from zec.suprnova.cc:2142
ZEC - Total Speed: 115.139 H/s, Total Shares: 48, Rejected: 0, Time: 00:02
ZEC: GPU0 40.982 H/s, GPU1 40.924 H/s, GPU2 33.233 H/s
ZEC: 11/05/16-13:00:02 - SHARE FOUND - (GPU 0)
ZEC: Share accepted (124 ms)!
ZEC: 11/05/16-13:00:02 - New job from zec.suprnova.cc:2142
ZEC - Total Speed: 113.914 H/s, Total Shares: 49, Rejected: 0, Time: 00:02
ZEC: GPU0 39.532 H/s, GPU1 41.256 H/s, GPU2 33.126 H/s

Pool sets new share target: 0x0016f260 (diff: 2856H)
ZEC: 11/05/16-12:59:59 - New job from zec.suprnova.cc:2142
ZEC - Total Speed: 115.139 H/s, Total Shares: 48, Rejected: 0, Time: 00:02
ZEC: GPU0 40.982 H/s, GPU1 40.924 H/s, GPU2 33.233 H/s
ZEC: 11/05/16-13:00:02 - SHARE FOUND - (GPU 0)
ZEC: Share accepted (124 ms)!
ZEC: 11/05/16-13:00:02 - New job from zec.suprnova.cc:2142
ZEC - Total Speed: 113.914 H/s, Total Shares: 49, Rejected: 0, Time: 00:02
ZEC: GPU0 39.532 H/s, GPU1 41.256 H/s, GPU2 33.126 H/s
ZEC: 11/05/16-13:00:18 - SHARE FOUND - (GPU 1)
ZEC: Share accepted (140 ms)!
GPU0 t=58C fan=33%, GPU1 t=54C fan=68%, GPU2 t=60C fan=51%
GPU0 t=59C fan=34%, GPU1 t=55C fan=68%, GPU2 t=60C fan=51%
Pool sets new share target: 0x000f4c40 (diff: 4284H)
ZEC: 11/05/16-13:01:04 - New job from zec.suprnova.cc:2142
ZEC - Total Speed: 114.501 H/s, Total Shares: 50, Rejected: 0, Time: 00:03
ZEC: GPU0 40.673 H/s, GPU1 43.028 H/s, GPU2 30.800 H/s
GPU0 t=60C fan=35%, GPU1 t=56C fan=68%, GPU2 t=61C fan=52%
GPU0 t=61C fan=36%, GPU1 t=56C fan=68%, GPU2 t=61C fan=52%
ZEC: 11/05/16-13:01:55 - SHARE FOUND - (GPU 0)
ZEC: Share accepted (125 ms)!
GPU0 t=61C fan=36%, GPU1 t=57C fan=68%, GPU2 t=61C fan=52%

It still wants to set difficulty too high I'll see if it stabilizes but I have no idea if it does not what I should set it to.  Realistically what should be the difficulty for each card so I can total it up and set it properly because the POOL is sure not doing it!  It bounces from 272 difficulty to 4539 difficulty which I am sure the higher range is not correct.

[ocminer]

Use d=256 as your pw and you should have static diff

[ocminer]

0 % fee and no withdrawal fees last day - get your coins

[110110101]

@ocminer, what is the difference in miner configuration between

Code:

-zwal YourUsername.YourWorker -zpsw YourWorkerPass

and

Code:

-u Weblogin.Worker -p password

i'm trying to login to the zec pool with with Claymores miner on Win7, but am only getting auth errors and disconnects.

[ocminer]

@ocminer, what is the difference in miner configuration between

Code:

-zwal YourUsername.YourWorker -zpsw YourWorkerPass

and

Code:

-u Weblogin.Worker -p password

i'm trying to login to the zec pool with with Claymores miner on Win7, but am only getting auth errors and disconnects.

claymore in version 1.1 should work fine, use zec.suprnova.cc:2142

ZecMiner64.exe -zpool zec.suprnova.cc:2142 -zwal YourUsername.YourWorker -zpsw YourWorkerPass -allpools 1

like:

ZecMiner64.exe -zpool zec.suprnova.cc:2142 -zwal suprnova.5 -zpsw x -allpools 1

or if you want static diff:

ZecMiner64.exe -zpool zec.suprnova.cc:2142 -zwal suprnova.5 -zpsw d=256 -allpools 1


I think you can even leave that "allpools 1" away with version 1.1

[110110101]

@ocminer, what is the difference in miner configuration between

Code:

-zwal YourUsername.YourWorker -zpsw YourWorkerPass

and

Code:

-u Weblogin.Worker -p password

i'm trying to login to the zec pool with with Claymores miner on Win7, but am only getting auth errors and disconnects.

claymore in version 1.1 should work fine, use zec.suprnova.cc:2142

ZecMiner64.exe -zpool zec.suprnova.cc:2142 -zwal YourUsername.YourWorker -zpsw YourWorkerPass -allpools 1

like:

ZecMiner64.exe -zpool zec.suprnova.cc:2142 -zwal suprnova.5 -zpsw x -allpools 1

or if you want static diff:

ZecMiner64.exe -zpool zec.suprnova.cc:2142 -zwal suprnova.5 -zpsw d=256 -allpools 1


I think you can even leave that "allpools 1" away with version 1.1

Very odd, when running with the login credentials as arguments to the miner it works fine (like a .bat file). When reading the credentials from the config.txt file it fails... Well at least I am mining now again. Thanks for your help!

[ocminer]

Cmdline for Claymore:

Code:

ZecMiner64.exe -zpool zec.suprnova.cc:2142 -zwal YourUsername.YourWorker -zpsw YourWorkerPass

[ocminer]

Withdrawal fee is and remains 0 , normal pool fee back to 1%

[smaxz]

whats the audio chime indicate on your dashboard screen ocminer?

[ocminer]

whats the audio chime indicate on your dashboard screen ocminer?

That means a new block has been found,  you can turn it off by clicking on the green speaker symbol bottom right

[ocminer]

Updated to v1.0.2 now - all nodes / stratums / frontends / payments are running flawless, seems we're finally getting there

[ocminer]

silentarmy now with nvidia support (linux):

Works fine on zec.suprnova.cc:2142 on nvidia 1060 and 970:

./silentarmy --list
Devices on platform "NVIDIA CUDA":
  ID 0: GeForce GTX 1060 6GB
  ID 1: GeForce GTX 970

./silentarmy --use 0,1 -c stratum+tcp://zec.suprnova.cc:2142 -u suprnova.1 -p x

...
Total 45.9 sol/s [dev0 26.1, dev1 23.7] 17 shares
Total 46.4 sol/s [dev0 27.2, dev1 24.0] 17 shares
Total 45.9 sol/s [dev0 26.4, dev1 23.1] 17 shares
Total 46.0 sol/s [dev0 27.3, dev1 23.2] 17 shares
Total 46.7 sol/s [dev0 26.7, dev1 24.6] 17 shares
Total 46.3 sol/s [dev0 25.8, dev1 24.2] 17 shares
Total 47.1 sol/s [dev0 27.2, dev1 24.6] 17 shares
Total 47.2 sol/s [dev0 27.5, dev1 25.0] 17 shares
...

[Cryptfo]

Seems to be a problem with the confirmed balance. The unconfirmed balance keeps rising, but the confirmed balance isn't changing at all.

Edit: Confirmed balance now starting to update.

[Sam123]

I'm getting on Radeon RX 480 ~20 Sol/s is this normal ?
I'm using nheqminer  GPU on Windows

[Hotmetal]

I'm getting on Radeon RX 480 ~20 Sol/s is this normal ?
I'm using nheqminer  GPU on Windows

Use Claymore's windows miner.. You can get around 40 - 60 sols/s depending on bios etc

[Hotmetal]

I have a feature request. Currently suprnova show's the current and historical earnings.
Is there any chance to add a "future earnings" tab like nanopool / nicehash and the other pools have?

That way I can tell (based on current hash rate / exchange pricing) what my future returns will / can be.

[Sam123]

I'm getting on Radeon RX 480 ~20 Sol/s is this normal ?
I'm using nheqminer  GPU on Windows

Use Claymore's windows miner.. You can get around 40 - 60 sols/s depending on bios etc

Thanks.
Where I can find the the compiled .Exe for Claymore's windows miner please

[Hotmetal]

Where I can find the the compiled .Exe for Claymore's windows miner please

https://lmgtfy.com/?q=claymore+zec+miner

[Sam123]

Where I can find the the compiled .Exe for Claymore's windows miner please

https://lmgtfy.com/?q=claymore+zec+miner

Thanks

[ocminer]

I have a feature request. Currently suprnova show's the current and historical earnings.
Is there any chance to add a "future earnings" tab like nanopool / nicehash and the other pools have?

That way I can tell (based on current hash rate / exchange pricing) what my future returns will / can be.

They're already in "Statistics->Pool" Tab.. However, those are like lottery, you never really know diff goes up/down and you also cannot really calculate luck.. So it's more an estimate

[smaxz]

I have a feature request. Currently suprnova show's the current and historical earnings.
Is there any chance to add a "future earnings" tab like nanopool / nicehash and the other pools have?

That way I can tell (based on current hash rate / exchange pricing) what my future returns will / can be.

you can always go to sites like coinwarz and use their calculators.. although i'm not sure how frequently they update to reflect the new "slow start" block rewards that are constantly increasing.

at the time of this post each 100sol/s should net you .025 ZEC per 24 hours of mining.

[olcaytu2005]

Hey oc, I know you are busy but please check your PM urgently due to a hacking incident.

[ocminer]

Hey oc, I know you are busy but please check your PM urgently due to a hacking incident.

Checked and replied

[ocminer]

Bump...

Boring days.. Everything works fine.. No problems at all...

https://zec.suprnova.cc

[ocminer]

As I keep getting questions about this, you can use anonymous mining on suprnova in the meanwhile too, even with ethos and/or claymore:


ZecMiner64.exe -zpool zec.suprnova.cc:2142 -zwal Yt1uaa4yJuwDvErGbzVERx69zt9qsaZZpMYG -zpsw anything


And you even set you a static diff for your worker with d=XX as password like so:

ZecMiner64.exe -zpool zec.suprnova.cc:2142 -zwal Yt1uaa4yJuwDvErGbzVERx69zt9qsaZZpMYG -zpsw d=256

[iMish]

As I keep getting questions about this, you can use anonymous mining on suprnova in the meanwhile too, even with ethos and/or claymore:


ZecMiner64.exe -zpool zec.suprnova.cc:2142 -zwal Yt1uaa4yJuwDvErGbzVERx69zt9qsaZZpMYG -zpsw anything


And you even set you a static diff for your worker with d=XX as password like so:

ZecMiner64.exe -zpool zec.suprnova.cc:2142 -zwal Yt1uaa4yJuwDvErGbzVERx69zt9qsaZZpMYG -zpsw d=256

finally thanks @ocminer

what is zec and zcl payout limit? with anonymous mining

[ocminer]

As I keep getting questions about this, you can use anonymous mining on suprnova in the meanwhile too, even with ethos and/or claymore:


ZecMiner64.exe -zpool zec.suprnova.cc:2142 -zwal Yt1uaa4yJuwDvErGbzVERx69zt9qsaZZpMYG -zpsw anything


And you even set you a static diff for your worker with d=XX as password like so:

ZecMiner64.exe -zpool zec.suprnova.cc:2142 -zwal Yt1uaa4yJuwDvErGbzVERx69zt9qsaZZpMYG -zpsw d=256

finally thanks @ocminer

what is zec and zcl payout limit? with anonymous mining

0.01 triggers the payout

[navydude]

Luck went down alot over last 24hrs. Overall been very satisfied with this pool.

[ocminer]

Luck went down alot over last 24hrs. Overall been very satisfied with this pool.

actually not really, i've just corrected the stats, luck is still the same

[ocminer]

Anonymous mining with wallet addresses and .rigname possible too:

ZecMiner64.exe -zpool zec.suprnova.cc:2142 -zwal t1gmg4yJuwDvErGbzVERx69zt9qsa4ZpMYG.YourWorker -zpsw anything

Claymore just released 6.0 - grab it ! :

[zawawa]

Something is not working... My unconfirmed balance is going up, but the reported hashhrate remains zero:

https://zcl.suprnova.cc/index.php?page=anondashboard&user=t1UTkgbSMqA57RCMvZKqknFM4V1NfmbpHwS

[ocminer]

Something is not working... My unconfirmed balance is going up, but the reported hashhrate remains zero:

https://zcl.suprnova.cc/index.php?page=anondashboard&user=t1UTkgbSMqA57RCMvZKqknFM4V1NfmbpHwS

I have a small bug currently that worker names are needed. Try to use   .rig1 or something similar behind the address and it should work

[gross]

suprnova gets free 5.56 ZEC with "orphan" block 11130 because pool script has error  
https://explorer.zcha.in/blocks/00000000cfdc2d358c369249dfd967bdf6b5d7f156082cdde5b9b025eaa9da73

[ocminer]

suprnova gets free 5.56 ZEC with "orphan" block 11130 because pool script has error  
https://explorer.zcha.in/blocks/00000000cfdc2d358c369249dfd967bdf6b5d7f156082cdde5b9b025eaa9da73

That "script" is the wallet :-)

I've corrected that, it's now credited


EDIT: And the wallet is still reporting it as orphaned.. I'll probably have to rescan the wallet later when I switch to the secondary wallet. I'm crediting the block anyway to the miners now and set it to confirmed.

[paramind22]

How do we tell OCminer when other coins in the pool go down.  The EAC pool seems down.   Is there a general thread?  PM without needing a response?   

[ocminer]

How do we tell OCminer when other coins in the pool go down.  The EAC pool seems down.   Is there a general thread?  PM without needing a response?   

you can just message me too if you like

https://eac.suprnova.cc ?

what problem have you got, it seems to be okay for me

[paramind22]

How do we tell OCminer when other coins in the pool go down.  The EAC pool seems down.   Is there a general thread?  PM without needing a response?  

you can just message me too if you like

https://eac.suprnova.cc ?

what problem have you got, it seems to be okay for me

Not getting accepteds.....no earnings seem to be passing into confirmed  
after a long time but blocks are being found.  Cgminer hangs on Network diff set.....


Note:

Working now.

[ocminer]

How do we tell OCminer when other coins in the pool go down.  The EAC pool seems down.   Is there a general thread?  PM without needing a response?  

you can just message me too if you like

https://eac.suprnova.cc ?

what problem have you got, it seems to be okay for me

Not getting accepteds.....no earnings seem to be passing into confirmed  
after a long time but blocks are being found.  Cgminer hangs on Network diff set.....


Note:

Working now.

I just pointed some hash there.. just seems that most miners are elsewhere atm

[gross]

Why do I receive ZEC TX type "Credit_PPS" Block #n/a

[ocminer]

Why do I receive ZEC TX type "Credit_PPS" Block #n/a

That's a cleanup Credit.. All your old "Credit" Transactions were accumulated into one big "Credit_PPS" - makes payouts a lot faster if you have > 2500 users

[ocminer]

If Nicehash says "pool difficulty too low" use d=8192 as workerpass in Nicehash (regardless of your real workerpass)

[ocminer]

Okay, added port 2143 extra for Nicehash now - seems to be easiest.

Also anonymous mining (mining with your wallet address without reigstering on the pool) possible with nicehash.. so you can easily point some hash to the pool, just use your ZEC wallet address

[ocminer]

Anonymous mining with wallet addresses and .rigname possible too:

ZecMiner64.exe -zpool zec.suprnova.cc:2142 -zwal t1gmg4yJuwDvErGbzVERx69zt9qsa4ZpMYG.YourWorker -zpsw anything

Claymore just released 6.0 - grab it ! :

bump

[ocminer]

There will be a 0 % fee period soon .. get your miners ready

[TheLAWNoob]

It's harder to tell my average hashrate on this pool but I'm loving the variable diff

I was using flypool last week and each rig used about 4GB including download and uploads. This pool is barely using any data thanks to the difficulty. Thanks ocminer!

[ocminer]

It's harder to tell my average hashrate on this pool but I'm loving the variable diff

I was using flypool last week and each rig used about 4GB including download and uploads. This pool is barely using any data thanks to the difficulty. Thanks ocminer!

A pleasure, great you like it.

There will be a surprise on friday too, stay tuned

[ocminer]

active on zec & zcl

[yslyung]

frontend down, cant login to add new miners, no auto worker creation, hurry fix it pls.

[ocminer]

frontend down, cant login to add new miners, no auto worker creation, hurry fix it pls.

I'm on it, there is a ddos going on currently

[yslyung]

frontend down, cant login to add new miners, no auto worker creation, hurry fix it pls.

I'm on it, there is a ddos going on currently

thx mate, maybe add auto worker creation ? have new rigs to point them to suprnova but no worker for them. my F5 key gonna break soon !

edit, i'm pointing all rigs to worker i created before for now.

[ocminer]

frontend down, cant login to add new miners, no auto worker creation, hurry fix it pls.

I'm on it, there is a ddos going on currently

thx mate, maybe add auto worker creation ? have new rigs to point them to suprnova but no worker for them. my F5 key gonna break soon !

edit, i'm pointing all rigs to worker i created before for now.

Yes, just point them to one worker, no problem

[gym520]

https://github.com/deepwebcash/deepwebcash   
https://bitcointalk.org/index.php?topic=1656768.0
http://dw.cash
 PLS help add the coin to  suprnova.cc
 Thinks .

[Golku]

is there something wrong with the dashboard cant see the hashing power of my rig

[Amnesiacu]

Curling the API still seems to work. Only 2 blocks in the last 6.5 hours though.

[gross]

please, update ZEC balance and ZEC unconfirm balance to user API

[joaogti36]

frontend still crashed? can't see my miners since... early morning .X

[gym520]

frontend down, cant login to add new miners, no auto worker creation, hurry fix it pls.

I'm on it, there is a ddos going on currently

thx mate, maybe add auto worker creation ? have new rigs to point them to suprnova but no worker for them. my F5 key gonna break soon !

edit, i'm pointing all rigs to worker i created before for now.

Yes, just point them to one worker, no problem

https://github.com/deepwebcash/deepwebcash   
https://bitcointalk.org/index.php?topic=1656768.0
http://dw.cash
 PLS help add the coin to  suprnova.cc
 Thinks .

[miayama]

Pool server is very slow, especially it was bad when ZEC mining start.

[ocminer]

Pool server is very slow, especially it was bad when ZEC mining start.

It's still slow for you? There was a problem yesterday but everything was fixed already. At launch server was laggy, yes, as everyone was F5'ing the pool like crazy

[miayama]

Pool server is very slow, especially it was bad when ZEC mining start.

It's still slow for you? There was a problem yesterday but everything was fixed already. At launch server was laggy, yes, as everyone was F5'ing the pool like crazy

Now everything is fine, maybe it had a problem with my internet connection, I'm sorry. When was start of mining ETC many pools broken due to large influx of miners and DDoS attacks.

[ocminer]

The ASIA node was having some connection issues today, it's fixed now !

And I encourage users to use anonymous mining with their wallet addresses as well - it's just easier:

Generate a new t-addr and then use Claymore like so:


ZecMiner64.exe -zpool zec.suprnova.cc:2142 -zwal t1gmg4yJuwDvErGbzVERx69zt9qsa4ZpMYG.YourWorker -zpsw anything

[gross]

Block 18574 doesn't credit 
https://explorer.zcha.in/blocks/00000000835a6f7c3a788fcd21b56a5f1c94cc57642ae44f1caf3c8d5b2fb2f7

[momentoo]

Hi,

Is it okey with the pool?
I tried it but have not received the payment. Please check https://zec.suprnova.cc/index.php?page=anondashboard&user=t1Ls3gJALtS8XEsogZ2GEcTyK5biiPJjxDo

[ocminer]

Hi,

Is it okey with pool?
I tried it but have not received the payment. Please check https://zec.suprnova.cc/index.php?page=anondashboard&user=t1Ls3gJALtS8XEsogZ2GEcTyK5biiPJjxDo

Yup, all good, your balance is too low, you need 0.01 confirmed coins before payout happens

[ocminer]

Get ready for some promos & bonuses

[ocminer]

As I keep getting questions about this, you can use anonymous mining on suprnova in the meanwhile too, even with ethos and/or claymore:


ZecMiner64.exe -zpool zec.suprnova.cc:2142 -zwal Yt1uaa4yJuwDvErGbzVERx69zt9qsaZZpMYG -zpsw anything


And you even set you a static diff for your worker with d=XX as password like so:

ZecMiner64.exe -zpool zec.suprnova.cc:2142 -zwal Yt1uaa4yJuwDvErGbzVERx69zt9qsaZZpMYG -zpsw d=256

Quoting this for awareness as there are still questions coming up

[ocminer]

Want some free coins ?

0% fee PINK MOTORBOAT Weekend active !

[DeCrypterManiac]

WTF is Pink Moterboard ?

In which country do you live ?

[ocminer]

WTF is Pink Moterboard ?

In which country do you live ?

Not Motherboard, Motorboat

It's just a name to make people smile and enjoy the 0 % fee on the weekend, nothing special

Have fun

[ocminer]

Last hours of Pink Motorboat, grab your free coins now !

https://zec.suprnova.cc

[ocminer]

Pink Motorboat Promo has ended - thinking about a name for a new promo now and will do something special then as well.

Just a reminder:

Anonymous mining on suprnova's ZEC pool is possible too, just use your wallet address as you would on other pools.

Static Diff can be set through your password field: d=256 as password would give you static diff of 256

[paramind22]

Anyone know why I might be getting lines with [33's in them and rarely get "accepteds"?  I'm mining with CPU and haven't mined for about 3 weeks now.  Is this because the difficulty went up?  

[ocminer]

Looks like we got a fast Nvidia miner finally :

https://bitcointalk.org/index.php?topic=1707546.0

Bat file for suprnova :

miner.exe --server zec.suprnova.cc --user suprnova.1 --pass x --port 2142  --cuda_devices 0 1 2 3

[BigMcRat]

Hi ocminer,

somthing is wrong account, lastblock in Transaction list is 23488, but a lot of more blocks was found.
Las Block that was found 23508...

Acount ID: 229537 / BigMcRat

[ocminer]

Hi ocminer,

somthing is wrong account, lastblock in Transaction list is 23488, but a lot of more blocks was found.
Las Block that was found 23508...

Acount ID: 229537 / BigMcRat

Hmm, did you had some submitted and valid shares after that block ? usually for all blocks you've submitted shares for you'll be credited.

[ocminer]

It's funny how fast a new function in a miner generates requests for features which were sleeping for years :-)

I've opened an SSL port as well:

ssl://zec.suprnova.cc:2242

can be used for Claymore 9 and you'll have a fully encrypted mining connection to suprnova as well.

[ocminer]

As there were some questions: No, the SSL port is not faster or slower, it's just secured by SSL/TLS.. So it's like you're switching from http:// to https://

[dmwardjr]

Hi OCminer,

I recently navigated to your website [Without reading directions].  I did try to mine to my ZEC address t1XAaQnvjwf8JhkwB3ZSBt76oPJE6WspPG4 on your pool at first like other ZEC pools.  I determined I could not monitor my rigs like other pools if done in this fashion.  It took a while to figure out I needed to create an account.

Once I created an account "ProudClown" and logged in, I got all my miners up and running without issue.  I entered in a wallet address in the field provided for auto payout and it was set to 3.0 ZEC.

My balance is now over 3.9 ZEC but no payout.

When I try to do an "On Demand Payout" it will not allow me to enter an address into the field provided.  It has a circle with a horizontal line drawn through it to symbolize "no entry."  No address is in that field at all.  When I look in the auto payout address field, no address is there either.  When I try to enter my address [The one I first tried to mine to without an account t1XAaQnvjwf8JhkwB3ZSBt76oPJE6WspPG4] in the auto payment field, it tells me, "... the address is in use."

Any ideas on what to do?  Did I create a conflict within your system when I first tried mining to my address without an account?  Am I forced now to use a different address?  If so, no big deal.

Thank you kindly,

David

[ocminer]

Hi !

Yes, you've created a conflict by using the address in an anonymous account first and now trying to use it in your private account.

You can either use a new address for your private account or message me again if it's not possible and I can delete the anonymous account.

[dmwardjr]

Hi !

Yes, you've created a conflict by using the address in an anonymous account first and now trying to use it in your private account.

You can either use a new address for your private account or message me again if it's not possible and I can delete the anonymous account.

Okay, thanks!

I'll give a different address a try.

[ocminer]

https://zec.suprnova.cc  will switch to PPLNS payout scheme within the next hours - stay tuned !

[ocminer]

Payout scheme has been switched from Prop to PPLNS - more steady and higher payouts for long term miners now.

[nanona]

Payout scheme has been switched from Prop to PPLNS - more steady and higher payouts for long term miners now.

Great. I guess you saw https://bitcointalk.org/index.php?topic=1656299.msg17114326#msg17114326 in the coinmine thread since this can't be coincidence (less than 24h after coinmine switched). Your pool was one of the pools where the multi-MSol/s miners jumped to when the round on coinmine approached 100%. That pool-hopping took away quite a few percent from loyal miners. Amazing how people cry because of 2.5% Claymore fee but don't realize a monster pool-hopper taking away 10x as much from them.

BTW, I think Claymore could be negatively affected with PPLNS if not many of his users mine on a particular pool, so his worker is active rather intermittent than pseudo-continuous. He could fix it by changing the intervals at which his DEV FEE kicks in.

[ocminer]

Payout scheme has been switched from Prop to PPLNS - more steady and higher payouts for long term miners now.

Great. I guess you saw https://bitcointalk.org/index.php?topic=1656299.msg17114326#msg17114326 in the coinmine thread since this can't be coincidence (less than 24h after coinmine switched). Your pool was one of the pools where the multi-MSol/s miners jumped to when the round on coinmine approached 100%. That pool-hopping took away quite a few percent from loyal miners. Amazing how people cry because of 2.5% Claymore fee but don't realize a monster pool-hopper taking away 10x as much from them.

BTW, I think Claymore could be negatively affected with PPLNS if not many of his users mine on a particular pool, so his worker is active rather intermittent than pseudo-continuous. He could fix it by changing the intervals at which his DEV FEE kicks in.

Yes, I was notified by feeleep as well as from some of my loyal miners, thanks a lot.

I will be doing 0% fee and bonuses very soon, currently mining the coins for the bonuses so people will get some compensation for that.

Claymore is no problem as the miner is mining the devfee also on suprnova and its not switching away.

[gross]

Rent cost hign over 30-40% normal ZEC mining cost with luck =100%, miners can dump for electric cost and go to another coins, but renters have to accept to lose by ZEC/BTC crash 10-20% rate(up to 30%/day). PPLNS is gameover for renter

[Ingramtg]

Rent cost hign over 30-40% normal ZEC mining cost with luck =100%, miners can dump for electric cost and go to another coins, but renters have to accept to lose by ZEC/BTC crash 10-20% rate(up to 30%/day). PPLNS is gameover for renter

clearly.now lend hash mining zec is  losing money with the low price ,but i am still mining , i believe the price will rise again

[gross]

suprnova pay wrong with PPLNS  you need coinmine setup again 

[ocminer]

You have to wait until you have shares in the last 10 blocks before you have full payout, it's PPLNS - not Prop anymore.

[dmwardjr]

suprnova pay wrong with PPLNS   you need coinmine setup again  

I would much rather have PPLNS.  It's the way to go in my opinion.

Suprnova, is a GREAT pool with quick response from support.

You have to allow your shares to build up over several rounds as OCminer said.

EDIT:  

I'm happy to have a thread here on bitcointalk.org for supernova.

I used to be in the CK/Kano Pool thread all the time when I mined bitcoin.  They know how to run a pool as well.  

By the way, they too run PPLNS.

[gross]

suprnova pay wrong with PPLNS   you need coinmine setup again  

I would much rather have PPLNS.  It's the way to go in my opinion.

Suprnova, is a GREAT pool with quick response from support.

You have to allow your shares to build up over several rounds as OCminer said.

EDIT:  

I'm happy to have a thread here on bitcointalk.org for supernova.

I used to be in the CK/Kano Pool thread all the time when I mined bitcoin.  They know how to run a pool as well.  

By the way, they too run PPLNS.

No, i mine many pool coinmine, miningpoolhub ... with PPLNS :every site auto splits my shares to many rounds though i mine in only 1 round or many rounds, i don't need build up over several rounds as at suprnova. With this way at suprnova, there are more total user actual shares than total PPLNS so user will lost shares and low profit then i say wrong with PPLNS

[ocminer]

Read this:

http://give-me-coins.com/support/faq/what-is-pplns/

You're confusing PPS / Prop with PPLNS

[dmwardjr]

Read this:

http://give-me-coins.com/support/faq/what-is-pplns/

You're confusing PPS / Prop with PPLNS

EXACTLY!

Thanks

[gross]

Pool miss block 26258 to credit all user 
https://explorer.zcha.in/blocks/000000004572313dd1bb39a643b16dfcd395e78dd5b25ca7baf6835a7dccea3e

[ocminer]

Pool miss block 26258 to credit all user 
https://explorer.zcha.in/blocks/000000004572313dd1bb39a643b16dfcd395e78dd5b25ca7baf6835a7dccea3e

Orphan on my side:


zcash-cli getblock 000000004572313dd1bb39a643b16dfcd395e78dd5b25ca7baf6835a7dccea3e
{
    "hash" : "000000004572313dd1bb39a643b16dfcd395e78dd5b25ca7baf6835a7dccea3e",
    "confirmations" : -1,
    "size" : 8876,
    "height" : 26258,
    "version" : 4,
    "merkleroot" : "497daf58ff35e62f0cde0f8b7ba1e91a21a86b617352061d96c3aee69a798a6b",
    "tx" : [
        "c96824fe12365e218ddd10f08335bd84d2252d918b04f2e7e9374e63b940c160",
        "8cdaa5cfdc326b236d054228f3c0bf2bd46bea07f17eed9e19e011ee863c6317",
        "6066742c98abd4b29f5f189e7d1529b3df6e6d9e858be676b026efeeaec6ba3f",
        "6b060c94421e2237e4770956f998279c37f3abf8e8064bb2658039ddab45bf2a",
        "d4bf615055262082087e60f2f276a8c9e780010a01ddaf04cd1459a0c0c9d10d",
        "32e88e0b5a33955d3a85d22bd70e444caf4d26b66913a3ca1eae240e6b9e6d95"
    ],
    "time" : 1481545495,

[gross]

Pool miss block 26258 to credit all user 
https://explorer.zcha.in/blocks/000000004572313dd1bb39a643b16dfcd395e78dd5b25ca7baf6835a7dccea3e

Orphan on my side:


zcash-cli getblock 000000004572313dd1bb39a643b16dfcd395e78dd5b25ca7baf6835a7dccea3e
{
    "hash" : "000000004572313dd1bb39a643b16dfcd395e78dd5b25ca7baf6835a7dccea3e",
    "confirmations" : -1,
    "size" : 8876,
    "height" : 26258,
    "version" : 4,
    "merkleroot" : "497daf58ff35e62f0cde0f8b7ba1e91a21a86b617352061d96c3aee69a798a6b",
    "tx" : [
        "c96824fe12365e218ddd10f08335bd84d2252d918b04f2e7e9374e63b940c160",
        "8cdaa5cfdc326b236d054228f3c0bf2bd46bea07f17eed9e19e011ee863c6317",
        "6066742c98abd4b29f5f189e7d1529b3df6e6d9e858be676b026efeeaec6ba3f",
        "6b060c94421e2237e4770956f998279c37f3abf8e8064bb2658039ddab45bf2a",
        "d4bf615055262082087e60f2f276a8c9e780010a01ddaf04cd1459a0c0c9d10d",
        "32e88e0b5a33955d3a85d22bd70e444caf4d26b66913a3ca1eae240e6b9e6d95"
    ],
    "time" : 1481545495,

27 confirms in zcash explorer to t1SaATQbzURpG1qU3vz9Wfn3pwXoTqFtTq2 .Is zcash explorer wrong 
https://explorer.zcha.in/blocks/000000004572313dd1bb39a643b16dfcd395e78dd5b25ca7baf6835a7dccea3e

[ocminer]

At least my wallets (backup wallet also) reports it as an orphan. This is the correct block:


https://explorer.zcha.in/blocks/000000008551183a0b671648492a3410122cac18569d03c923ca512fbd7e158c

zcash-cli getblockhash 26258
000000008551183a0b671648492a3410122cac18569d03c923ca512fbd7e158c

zcash-cli getblock 000000008551183a0b671648492a3410122cac18569d03c923ca512fbd7e158c
{
    "hash" : "000000008551183a0b671648492a3410122cac18569d03c923ca512fbd7e158c",
    "confirmations" : 29,
    "size" : 16067,
    "height" : 26258,
    "version" : 4,
    "merkleroot" : "f59344a829eae4371bb5b76a1955c33f76b68fd6d3947ea39d57ac50a0f8cd84",
    "tx" : [
        "64a5cb58310484d49069c81e557a895e415cd4d6a4d2c186f944d96b085bedee",
        "8cdaa5cfdc326b236d054228f3c0bf2bd46bea07f17eed9e19e011ee863c6317",
        "6066742c98abd4b29f5f189e7d1529b3df6e6d9e858be676b026efeeaec6ba3f",
        "774a1cf6e81fad8f307608b326972ad939337b440c12b3ab1621fff179b5925c",
        "6b060c94421e2237e4770956f998279c37f3abf8e8064bb2658039ddab45bf2a",
        "e4dd8fa9165c465d9d49ab54bb877fb798e172ba357c4ebe5804eda259a9c37e",
        "d4bf615055262082087e60f2f276a8c9e780010a01ddaf04cd1459a0c0c9d10d",
        "32e88e0b5a33955d3a85d22bd70e444caf4d26b66913a3ca1eae240e6b9e6d95"
    ],
    "time" : 1481544464,

[gross]

At least my wallets (backup wallet also) reports it as an orphan. This is the correct block:


https://explorer.zcha.in/blocks/000000008551183a0b671648492a3410122cac18569d03c923ca512fbd7e158c

zcash-cli getblockhash 26258
000000008551183a0b671648492a3410122cac18569d03c923ca512fbd7e158c

zcash-cli getblock 000000008551183a0b671648492a3410122cac18569d03c923ca512fbd7e158c
{
    "hash" : "000000008551183a0b671648492a3410122cac18569d03c923ca512fbd7e158c",
    "confirmations" : 29,
    "size" : 16067,
    "height" : 26258,
    "version" : 4,
    "merkleroot" : "f59344a829eae4371bb5b76a1955c33f76b68fd6d3947ea39d57ac50a0f8cd84",
    "tx" : [
        "64a5cb58310484d49069c81e557a895e415cd4d6a4d2c186f944d96b085bedee",
        "8cdaa5cfdc326b236d054228f3c0bf2bd46bea07f17eed9e19e011ee863c6317",
        "6066742c98abd4b29f5f189e7d1529b3df6e6d9e858be676b026efeeaec6ba3f",
        "774a1cf6e81fad8f307608b326972ad939337b440c12b3ab1621fff179b5925c",
        "6b060c94421e2237e4770956f998279c37f3abf8e8064bb2658039ddab45bf2a",
        "e4dd8fa9165c465d9d49ab54bb877fb798e172ba357c4ebe5804eda259a9c37e",
        "d4bf615055262082087e60f2f276a8c9e780010a01ddaf04cd1459a0c0c9d10d",
        "32e88e0b5a33955d3a85d22bd70e444caf4d26b66913a3ca1eae240e6b9e6d95"
    ],
    "time" : 1481544464,

What is receiving address from this transaction ID: 000000008551183a0b671648492a3410122cac18569d03c923ca512fbd7e158c ?
No confirms, no receiving address from transaction ID000000008551183a0b671648492a3410122cac18569d03c923ca512fbd7e158c

[ocminer]

At least my wallets (backup wallet also) reports it as an orphan. This is the correct block:


https://explorer.zcha.in/blocks/000000008551183a0b671648492a3410122cac18569d03c923ca512fbd7e158c

zcash-cli getblockhash 26258
000000008551183a0b671648492a3410122cac18569d03c923ca512fbd7e158c

zcash-cli getblock 000000008551183a0b671648492a3410122cac18569d03c923ca512fbd7e158c
{
    "hash" : "000000008551183a0b671648492a3410122cac18569d03c923ca512fbd7e158c",
    "confirmations" : 29,
    "size" : 16067,
    "height" : 26258,
    "version" : 4,
    "merkleroot" : "f59344a829eae4371bb5b76a1955c33f76b68fd6d3947ea39d57ac50a0f8cd84",
    "tx" : [
        "64a5cb58310484d49069c81e557a895e415cd4d6a4d2c186f944d96b085bedee",
        "8cdaa5cfdc326b236d054228f3c0bf2bd46bea07f17eed9e19e011ee863c6317",
        "6066742c98abd4b29f5f189e7d1529b3df6e6d9e858be676b026efeeaec6ba3f",
        "774a1cf6e81fad8f307608b326972ad939337b440c12b3ab1621fff179b5925c",
        "6b060c94421e2237e4770956f998279c37f3abf8e8064bb2658039ddab45bf2a",
        "e4dd8fa9165c465d9d49ab54bb877fb798e172ba357c4ebe5804eda259a9c37e",
        "d4bf615055262082087e60f2f276a8c9e780010a01ddaf04cd1459a0c0c9d10d",
        "32e88e0b5a33955d3a85d22bd70e444caf4d26b66913a3ca1eae240e6b9e6d95"
    ],
    "time" : 1481544464,

What is receiving address from this transaction ID: 000000008551183a0b671648492a3410122cac18569d03c923ca512fbd7e158c ?
No confirms, no receiving address from transaction ID000000008551183a0b671648492a3410122cac18569d03c923ca512fbd7e158c

No idea, i'm not the author/operator of the block explorer, on my side the block looks totally normal, though it was not mined by suprnova:

TX'es etc are all there:

zcash-cli getblock 000000008551183a0b671648492a3410122cac18569d03c923ca512fbd7e158c
{
    "hash" : "000000008551183a0b671648492a3410122cac18569d03c923ca512fbd7e158c",
    "confirmations" : 29,
    "size" : 16067,
    "height" : 26258,
    "version" : 4,
    "merkleroot" : "f59344a829eae4371bb5b76a1955c33f76b68fd6d3947ea39d57ac50a0f8cd84",
    "tx" : [
        "64a5cb58310484d49069c81e557a895e415cd4d6a4d2c186f944d96b085bedee",
        "8cdaa5cfdc326b236d054228f3c0bf2bd46bea07f17eed9e19e011ee863c6317",
        "6066742c98abd4b29f5f189e7d1529b3df6e6d9e858be676b026efeeaec6ba3f",
        "774a1cf6e81fad8f307608b326972ad939337b440c12b3ab1621fff179b5925c",
        "6b060c94421e2237e4770956f998279c37f3abf8e8064bb2658039ddab45bf2a",
        "e4dd8fa9165c465d9d49ab54bb877fb798e172ba357c4ebe5804eda259a9c37e",
        "d4bf615055262082087e60f2f276a8c9e780010a01ddaf04cd1459a0c0c9d10d",
        "32e88e0b5a33955d3a85d22bd70e444caf4d26b66913a3ca1eae240e6b9e6d95"
    ],
    "time" : 1481544464,
    "nonce" : "00000000000000000000000000003d5c00000000000000000000000000000000",
    "solution" : "003f037315c6ea030a52f2bda87cdb6d94b5ff5753075ea457bfc2fccb71c28342bae39db564991 509e60828ac1afb4bca158364953f5675528954f10d29630ed9f3bd9f076e1c7ac25799433d43f6 5954f8183d00be0282c35ce8879a05f165c0c475a96f7a9279c006c60e396289a19356fe609cb9e bf5a1579adc6aa009c1d52f0a084e0da9c57283397e27431e5bbf3a5a161e0dc591c97e25e7efa2 6f429ee6736473ddcb720467f3ebcf9f4365c9e56166d8d0619720717c9a6615103147fbd5b6456 848a6747d3f898b2fc9debd910eb4075a3979fe03fb515611c54140c26e5838090b12dee746c92d 3f41d2b373f4f3a2e4999160577f8e0d57475cbf85b3383cc2a3f148de45bd307fb8674815183cf fe18593c2b699fb5e2475587aded759217711865eee718717d04729066c79ca4b7e5e321a79e147 56cb20272aa615d77ed6d4664c7f6a391877ebcd019312dabb46992efdd0e0730d9beb9f1f939a0 4080e2021cfb5105492fb7d5141f513546de8373b9e350401a23ea54483a2245e91dc4ede615249 16994eca184bdcfca3863e6505e8aa68ee6823d77950dc5093043ea8a0c90fa5f0bf2ae2e9ef1bd 5d54ae71e4a9a29a1b6fe294bb05db2b297dfc7da934a1c2f7fc3c10fee147d13284eaf488833df 6a24d305d61b19b64d299d55e8ca6bb935a97f03d0589fcb9f78b75f57600adc6e11ee4c543ae30 e923008e432d33b1a3e018020e834ef1936e87be21b86e022fe78a24556dd943c127f12c9e59707 2568d552f846b69bc26902bc61ba39fae48ed0a5b3c13feae53b8f4fa68d85569eff180b4a08e6c e8cffdfa497d200794aa7b9882a9015ec523c72b90d5d1f6efa82b5e94c42d296c7a25824a919e0 b5c5c09001a6d73b12616d6a45962f859cbcce214284ae0f70a745daa353cd21a1e6d534b56fb54 3023b91e5eb152397667801a5adcbc804dc8cb2c38b2b685f2042ac7287741ab4f0c8d1974294a8 9ae5a71bf3a73cf8c9ee1d2a7ce2f78a6724f71b759d2f1b2e260cf2c28f700f02a2457aaf2e643 30420b9c49d0327fa227d5909a6d91eb034905043112d399524a66151c792d73165f7f19f4ab6b4 6fbfd3c37b1f67a4147beac63e2b4551f3287232f931e3494e9abad70819286586623938e3fab84 3c86af6410d67e3b2df49030245f989c2e5b81bf1123267d64c05fe57df3b7c48afea8254a3ded1 8f4474905b7d4f89b747af92141e41daf6e0207253ba88c9ed11706812cad65f21441f744420522 1c0555c4067c0a2712dd6038c555efe0d0129a29e5b383bb8f304c2a0fcbf9717bc9fb4a8174ccf 7ad6bc0b77ef01c7c902c1ae827ca6dc9d0611c71c78351741736c0fa48948d765e2aa11fb5db05 26f5452aa987bb5f523a8a1c3c9b8f2d0cf5f8ade02d49cd2d16be10d914b8245261518d19d50d5 b9b34fabed4b8d23879f4a579841767809be1ca9b6115e0ae7ad6056c8665de8628427436252e18 93690dbcc0eb07aa2bf749083e280624ce848ca41389f7718ba05e9be1710a6a2d19ebdfbd2b8ff 9b2f22f159ac521981ac51b953601fe1b634af5c5ea28b00353e4c3c274bbb6218270959bc38b7d e8e787a52a8995e03cf2aa326fa4869e6f3e9d3f2de233e18fd74ccef3e4705083ce2e306608510 57041920fe6f8538d07d71e53ebfec3b3cf5afffcafa651eda791f2dc71ecfe984087b8a925e559 85cc339830fdf6bbd452b1a49ca7c263561b2089fb3c3d2e8f2e110f8911d41c2d0d43907112cb5 d40e7eff64d2b0fd0b76f974a8a5d513593e2a46a19e279ed5937db68bcad1fc23c048de1ba40c9 8b3d9648f61636612d788f7e4dda25d905503021835df3f1a13a123ec0116036c39a76649b19c40 f0",
    "bits" : "1d008eeb",
    "difficulty" : 939122.44327220,
    "chainwork" : "00000000000000000000000000000000000000000000000000005e2088938ee3",
    "previousblockhash" : "00000000778649d0e8554b7968bd8121d9d908bed9bf586e7f47833390fe3d55",
    "nextblockhash" : "00000000253c4269b0a2bc3d76d952c024eadf3cce8d2e4e8627964101a982ee"
}


Nevertheless the pool is still very lucky when you look at the stats, we've found 2 times the block which would have been estimated for the last hour

[ocminer]

Luck is 20% Better in the last 24h then expected, grats to the miners 

[Ejinx]

Could it be the future crypto?

[ocminer]

Could it be the future crypto?

Might be, the pool is doing very well, looks like there is a lot of interest

[gross]

Last 20 blocks     Bad
Totals    8,742,730,577    13,392,393,027    15,026,887,719    171.88

[ocminer]

Last 20 blocks     Bad
Totals    8,742,730,577    13,392,393,027    15,026,887,719    171.88

Sometimes it's good, sometimes it's bad..  Like in real life

[ocminer]

I'll be doing some nice promos over the holidays, make sure you have your spot

[ocminer]

Merry Christmas to all miners and their families!

0% fee during the holidays.

More 0% fee pools announced on http://twitter.com/SuprnovaPools and www.suprnova.cc

[dmwardjr]

Merry Christmas to all miners and their families!

0% fee during the holidays.

Thank you very much, Sir.  Much appreciated!

Merry Christmas!

[ocminer]

Merry Christmas to all miners and their families!

0% fee during the holidays.

Thank you very much, Sir.  Much appreciated!

Merry Christmas!

Thanks, merry Christmas to you as well 

There is also an ssl port available on suprnova in case you want so mine with claymore and save some extra fees.

[ocminer]

0% fee in a few days again

[ocminer]

China node was having a few issues today, it's fully back up now latency should be fine again

[painmaker]

cheers!

i recently joined suprnova's zec-pool and was wondering what the donation each user can select is used for.
looked around the site and couldn't find any info on this.

a donation based pool is an interesting idea albeit i doubt enough would be willing to donate to make up for a low/zero percentage of fee's but since there is a fair 1% fee on suprnova (with occasional 0% special's) i wonder out of pure interest what the additional donation would be used for.

anyway, thanks for the good work and support!

[Rodderick]

0% fee in a few days again

Looking forward to it. Happy New Year to all!

[Arrakeen]

Just a heads up, I received an e-mail from suprnova three days ago 12/29:

You account has been locked due to too many failed password or PIN attempts. Please follow the URL below to unlock your account.

Just curious if anyone else has had similar issues, in this pool or elsewhere.

Wonder what that was all about...?

[ocminer]

Just a heads up, I received an e-mail from suprnova three days ago 12/29:

You account has been locked due to too many failed password or PIN attempts. Please follow the URL below to unlock your account.

Just curious if anyone else has had similar issues, in this pool or elsewhere.

Wonder what that was all about...?

"Hackers" which have your mailaddresses from any public dumps/hacks try mail address / password combinations on the pool - after three not unsuccessful  tries your account gets locked for security reasons.

[painmaker]

hmmm, noone knowing what the donation is used for?
then i guess its simply some extra benefit to the pool-creator without any certain intent?

another one: the suprnova-website (-> getting started) states that anonymous mining is possible by specifying a (ZEC-)address as username.
mining statistics should be further available through https://zec.suprnova.cc/index.php?page=anondashboard&user=<address>
i've tried to do so but all i get is a dashboard-page where all values are missing even if i have submitted multiple shares before (no balance, no workers listed, empty histograms,...).
the address used also has not yet received anything so i guess there is a payout-threshold? if yes, how high is that, if no, how does one trigger a payout for anonymously mined ZEC?

again, thanks for your help!

[ocminer]

hmmm, noone knowing what the donation is used for?
then i guess its simply some extra benefit to the pool-creator without any certain intent?

Donation is a donation to the pool op - if you like the pool, the service and everything is like you want - donate a bit

another one: the suprnova-website (-> getting started) states that anonymous mining is possible by specifying a (ZEC-)address as username.
mining statistics should be further available through https://zec.suprnova.cc/index.php?page=anondashboard&user=<address>
i've tried to do so but all i get is a dashboard-page where all values are missing even if i have submitted multiple shares before (no balance, no workers listed, empty histograms,...).
the address used also has not yet received anything so i guess there is a payout-threshold? if yes, how high is that, if no, how does one trigger a payout for anonymously mined ZEC?

again, thanks for your help!

The payout threshold is 0.01 ZCL and you need to define a rigname when mining. So for example when you're mining with t1xxxxxxxxxx as wallet address, your username for the miner should be t1xxxxxxxxxxxx.rig1 or .rig2 etc.. Then you can access the statistics for that address using the Anondashboard link on the Homepage.

[painmaker]

allright, thanks for clarifying!

so far, i do like the pool, service and everything

that info would be helpful on the website as well, especially the part of the threshold and the need for named nodes in order to be able to access any statistics.

i still seem to do something wrong here as i cannot see any statistics (all values empty) as before even after adding a '.name' to my address string. i guess the link to the anondashboard won't include the addresses '.name' extension, right?
mining on my registered account works fine so the problem shouldn't be on the software software-side here i suppose...

would it make sense if i pm you my address so you could check if you can find any balance/data to it in the system? be warned that i might have set that address also as payout-addr in my registered account...

[ocminer]

allright, thanks for clarifying!

so far, i do like the pool, service and everything

that info would be helpful on the website as well, especially the part of the threshold and the need for named nodes in order to be able to access any statistics.

i still seem to do something wrong here as i cannot see any statistics (all values empty) as before even after adding a '.name' to my address string. i guess the link to the anondashboard won't include the addresses '.name' extension, right?
mining on my registered account works fine so the problem shouldn't be on the software software-side here i suppose...

would it make sense if i pm you my address so you could check if you can find any balance/data to it in the system? be warned that i might have set that address also as payout-addr in my registered account...

Yes, you can PM me your address and I'll check the anondashboard stuff again

[armazingerz]

Hi!

I have been mining for some time and I have a couple of questions;

In the suprnova website -> Statistics -> Pool, you can see your Hashrate, but actually I'm too afar from that number, why can this be happening?

Which difficulty should I set up? I have 2 rigs with 1.200h/s each one but I have not a clue about which difficulty may be better and why

Thanx a lot

[ocminer]

@armazingerz:
Check "My Account" -> "Edit workers". You should see the full hashrate there, the Dashboard is cached for performance.


OVH seems to have a bigger issue at the moment, some routes are broken and the servers unreachable, I hope they'll fix it ASAP. From Suprnova's side everything is okay.

[m1n1ngP4d4w4n]

Hey Ocminer,

Would it be possible to fix the warning mails ? when you receive a mail from pool, any pool, it's always taggued [ XMR.suprnova.cc ] even if it's the ZEC pool for example.

I just received a mail about idle workers that are in my ZEC suprnova acount and it's tagged [ XMR.suprnova.cc ]

thanks in advance

[ocminer]

Hey Ocminer,

Would it be possible to fix the warning mails ? when you receive a mail from pool, any pool, it's always taggued [ XMR.suprnova.cc ] even if it's the ZEC pool for example.

I just received a mail about idle workers that are in my ZEC suprnova acount and it's tagged [ XMR.suprnova.cc ]

thanks in advance

Hmm, interesting I never saw that. Are you sure it isn't your mailing program which is tagging the mails from a similar sender with the same tag? I'm having that with Outlook too

[m1n1ngP4d4w4n]

Hey Ocminer,

Would it be possible to fix the warning mails ? when you receive a mail from pool, any pool, it's always taggued [ XMR.suprnova.cc ] even if it's the ZEC pool for example.

I just received a mail about idle workers that are in my ZEC suprnova acount and it's tagged [ XMR.suprnova.cc ]

thanks in advance

Hmm, interesting I never saw that. Are you sure it isn't your mailing program which is tagging the mails from a similar sender with the same tag? I'm having that with Outlook too

Ah yes this is indeed possible since it's coming from all admin@supernova.cc, do you think you could add where it's coming from in the mail body ? that would be helpfull for filtering & such

Also another query is, it's possible from the API to have a rundown per workers (like having a json entry per workers) ? or it's limited to overall ?

Thanks

[ocminer]

Hey Ocminer,

Would it be possible to fix the warning mails ? when you receive a mail from pool, any pool, it's always taggued [ XMR.suprnova.cc ] even if it's the ZEC pool for example.

I just received a mail about idle workers that are in my ZEC suprnova acount and it's tagged [ XMR.suprnova.cc ]

thanks in advance

Hmm, interesting I never saw that. Are you sure it isn't your mailing program which is tagging the mails from a similar sender with the same tag? I'm having that with Outlook too

Ah yes this is indeed possible since it's coming from admin@supernova.cc, do you think you could add where it's coming from in the mail body ?

Also another query is, it's possible from the API to have a rundown per workers ? or it's limited to overall ?

Thanks

The mails are coming from a central servers, so I'd need to reconfigure quite a lot to have a different sender

Google for MPOS API and you'll find all the possibilities, quite a lot can be done over the API

[m1n1ngP4d4w4n]

Hey Ocminer,

Would it be possible to fix the warning mails ? when you receive a mail from pool, any pool, it's always taggued [ XMR.suprnova.cc ] even if it's the ZEC pool for example.

I just received a mail about idle workers that are in my ZEC suprnova acount and it's tagged [ XMR.suprnova.cc ]

thanks in advance

Hmm, interesting I never saw that. Are you sure it isn't your mailing program which is tagging the mails from a similar sender with the same tag? I'm having that with Outlook too

Ah yes this is indeed possible since it's coming from admin@supernova.cc, do you think you could add where it's coming from in the mail body ?

Also another query is, it's possible from the API to have a rundown per workers ? or it's limited to overall ?

Thanks

The mails are coming from a central servers, so I'd need to reconfigure quite a lot to have a different sender

Google for MPOS API and you'll find all the possibilities, quite a lot can be done over the API

Ok for the API,

Ah no i didn't asked for a different sender, just changing the body of the mail to show what pool it's coming from.

like

Code:

One of your workers @zec.suprnova.cc is currently IDLE: xxxxxxxx

We have not received any shares for this worker in the past 10 minutes.

Since monitoring is enabled for this worker, this notification was sent.


Please check your workers!

[ocminer]

Hey Ocminer,

Would it be possible to fix the warning mails ? when you receive a mail from pool, any pool, it's always taggued [ XMR.suprnova.cc ] even if it's the ZEC pool for example.

I just received a mail about idle workers that are in my ZEC suprnova acount and it's tagged [ XMR.suprnova.cc ]

thanks in advance

Hmm, interesting I never saw that. Are you sure it isn't your mailing program which is tagging the mails from a similar sender with the same tag? I'm having that with Outlook too

Ah yes this is indeed possible since it's coming from admin@supernova.cc, do you think you could add where it's coming from in the mail body ?

Also another query is, it's possible from the API to have a rundown per workers ? or it's limited to overall ?

Thanks

The mails are coming from a central servers, so I'd need to reconfigure quite a lot to have a different sender

Google for MPOS API and you'll find all the possibilities, quite a lot can be done over the API

Ok for the API,

Ah no i didn't asked for a different sender, just changing the body of the mail to show what pool it's coming from.

like

Code:

One of your workers @zec.suprnova.cc is currently IDLE: xxxxxxxx

We have not received any shares for this worker in the past 10 minutes.

Since monitoring is enabled for this worker, this notification was sent.


Please check your workers!

Ah okay, I'll check that, are you mining on zec  AND xmr? The mail should come from the pool were you submitted the last share

[m1n1ngP4d4w4n]

Hey Ocminer,

Would it be possible to fix the warning mails ? when you receive a mail from pool, any pool, it's always taggued [ XMR.suprnova.cc ] even if it's the ZEC pool for example.

I just received a mail about idle workers that are in my ZEC suprnova acount and it's tagged [ XMR.suprnova.cc ]

thanks in advance

Hmm, interesting I never saw that. Are you sure it isn't your mailing program which is tagging the mails from a similar sender with the same tag? I'm having that with Outlook too

Ah yes this is indeed possible since it's coming from admin@supernova.cc, do you think you could add where it's coming from in the mail body ?

Also another query is, it's possible from the API to have a rundown per workers ? or it's limited to overall ?

Thanks

The mails are coming from a central servers, so I'd need to reconfigure quite a lot to have a different sender

Google for MPOS API and you'll find all the possibilities, quite a lot can be done over the API

Ok for the API,

Ah no i didn't asked for a different sender, just changing the body of the mail to show what pool it's coming from.

like

Code:

One of your workers @zec.suprnova.cc is currently IDLE: xxxxxxxx

We have not received any shares for this worker in the past 10 minutes.

Since monitoring is enabled for this worker, this notification was sent.


Please check your workers!

Ah okay, I'll check that, are you mining on zec  AND xmr? The mail should come from the pool were you submitted the last share

For the moment only ZEC rigs, waiting to also put my XMR rigs as soon as i can use the exchange adress with payment ID

just thinking ahead, since im gonna use 2 maybe 3 of your pools and have a buttload for workers

[ocminer]

Hey Ocminer,

Would it be possible to fix the warning mails ? when you receive a mail from pool, any pool, it's always taggued [ XMR.suprnova.cc ] even if it's the ZEC pool for example.

I just received a mail about idle workers that are in my ZEC suprnova acount and it's tagged [ XMR.suprnova.cc ]

thanks in advance

Hmm, interesting I never saw that. Are you sure it isn't your mailing program which is tagging the mails from a similar sender with the same tag? I'm having that with Outlook too

Ah yes this is indeed possible since it's coming from admin@supernova.cc, do you think you could add where it's coming from in the mail body ?

Also another query is, it's possible from the API to have a rundown per workers ? or it's limited to overall ?

Thanks

The mails are coming from a central servers, so I'd need to reconfigure quite a lot to have a different sender

Google for MPOS API and you'll find all the possibilities, quite a lot can be done over the API

Ok for the API,

Ah no i didn't asked for a different sender, just changing the body of the mail to show what pool it's coming from.

like

Code:

One of your workers @zec.suprnova.cc is currently IDLE: xxxxxxxx

We have not received any shares for this worker in the past 10 minutes.

Since monitoring is enabled for this worker, this notification was sent.


Please check your workers!

Ah okay, I'll check that, are you mining on zec  AND xmr? The mail should come from the pool were you submitted the last share

For the moment only ZEC rigs, waiting to also put my XMR rigs as soon as i can use the exchange adress with payment ID

just thinking ahead, since im gonna use 2 maybe 3 of your pools and have a buttload for workers

OK, currently you'll always get the email from that Pool were you sent the last share before the rig went offline.

[m1n1ngP4d4w4n]

OK, currently you'll always get the email from that Pool were you sent the last share before the rig went offline.

Ok roger that, thx for the info

[m1n1ngP4d4w4n]

I've been mining for 4-5hours now, but even though i see my workers having hashrate same for global hashrate in API, my dashboard is empty with no datas, and my transactions page show very low amount of zcash, in the past few hours i should have mined with my test rig around... 0.03/0.04 ZEC (that's what i was doing on flypool), but the earning or transaction tab show me only 0.0076 and also show me an empty address for wallet even though it's filled in on the account page and all transaction are in "unconfirmed" , so is it normal or something is wrong ?

One thing weird, even though im mining with workers, the API says "anonymous : 1".

will reswitch this rig on flypool in the meantime.

[ocminer]

I've been mining for 4-5hours now, but even though i see my workers having hashrate same for global hashrate in API, my dashboard is empty with no datas, and my transactions page show very low amount of zcash, in the past few hours i should have mined with my test rig around... 0.03/0.04 ZEC (that's what i was doing on flypool), but the earning or transaction tab show me only 0.0076 and also show me an empty address for wallet even though it's filled in on the account page and all transaction are in "unconfirmed" , so is it normal or something is wrong ?

One thing weird, even though im mining with workers, the API says "anonymous : 1".

will reswitch this rig on flypool in the meantime.

Yes thats normal, you'll have to mine for at least 12h as the payout scheme is PPLNS on the pool, you'll need to build up a "buffer" of shares before full payout is reached.

[m1n1ngP4d4w4n]

I've been mining for 4-5hours now, but even though i see my workers having hashrate same for global hashrate in API, my dashboard is empty with no datas, and my transactions page show very low amount of zcash, in the past few hours i should have mined with my test rig around... 0.03/0.04 ZEC (that's what i was doing on flypool), but the earning or transaction tab show me only 0.0076 and also show me an empty address for wallet even though it's filled in on the account page and all transaction are in "unconfirmed" , so is it normal or something is wrong ?

One thing weird, even though im mining with workers, the API says "anonymous : 1".

will reswitch this rig on flypool in the meantime.

Yes thats normal, you'll have to mine for at least 12h as the payout scheme is PPLNS on the pool, you'll need to build up a "buffer" of shares before full payout is reached.

Okay will let it run for 24h then i'll compare, flypool got the same payout scheme but they pay each hour or so, so i wasn't sure it was properly working, thx for the infos

[m1n1ngP4d4w4n]

Okay after 24h here is my report.

Pros
Good hashrate report, average over 24h on miner/worker is in line with average total hashrate & average per worker hashrate from the API.
Good network, very responsive.
SSL connection
Worker support
Very complete API for good and efficient monitoring.
Healthy pool with nice luck & payouts, for the last 24h, i earned 20% more than what i made on flypool for the same duration, we'll see how it goes in the course of the next few days.
recurrent short duration pool fee reduction
A nice mod that took his time to reply to my queries  

Cons
After 24h i still have no stats @ all in my dashboard, i dunno if it's normal or not, workers page & api work as intended.
Not much else  

Neutral
Interface could be redesigned a bit of clutter there & there
No 2FA support aside from PIN (google 2fa or others would be appreciated)
Pool infos like fee could be indicated on home page
Could have "on the fly" worker support instead of having to create it (but i suppose you would need to add in the user name the ID or api key for that to avoid issues) or that we could create them from the API (i didn't saw a way to do that)

Conclusion

An excellent pool, good payouts because pool is pretty big and quite lucky, very accurate, with a very good and responsive API for efficient monitoring. Good work, 25ksols coming your way, and i'll add 1% donation  

[ocminer]

Okay after 24h here is my report.

Pros
Good hashrate report, average over 24h on miner/worker is in line with average total hashrate & average per worker hashrate from the API.
Good network, very responsive.
SSL connection
Worker support
Very complete API for good and efficient monitoring.
Healthy pool with nice luck & payouts, for the last 24h, i made 25% more than what i made on flypool for the same duration, we'll see how it goes in the course of the next few days.
recurrent short duration pool fee reduction
A nice mod that took his time to reply to my queries  

Cons
After 24h i still have no stats @ all in my dashboard, i dunno if it's normal or not, workers page & api work as intended.
Not much else  

Neutral
Interface could be redesigned a bit of clutter there & there
No 2FA support aside from PIN (google 2fa or others would be appreciated)
Pool infos like fee could be indicated on home page
Could have "on the fly" worker support instead of having to create it (but i suppose you would need to add in the user name the ID or api key for that to avoid issues) or that we could create them from the API (i didn't saw a way to do that)

Conclusion

An excellent pool, good payouts because pool is pretty big and quite lucky, very accurate, with a very good and responsive API for efficient monitoring. Good work, 25ksols coming your way, and i'll add 1% donation  

Great review, thank you very much, feels good to hear positive feedback for all the time and work I'm investing into the pool(s) 

I agree with your criticism and will try to optimize and enhance!

Great to have you on the pool.

[m1n1ngP4d4w4n]

Great review, thank you very much, feels good to hear positive feedback for all the time and work I'm investing into the pool(s) 

I agree with your criticism and will try to optimize and enhance!

Great to have you on the pool.

My pleasure, happy to be here, keep up the good work 

[dmwardjr]

Hi OC Miner,

How long does a rig have to be idle before I get a notification?

Today, I've logged on to my Dashboard to find only 31 rigs instead of 32 mining.  However, on my Awesome Miner Dashboard, it says 32 rigs are mining.  The first time I identified the one the pool said was off line and simply rebooted it and it showed back up again on the pool.

About two minutes later it said 31 instead of 32 rigs again.  I identified that one and rebooted then it shows up on the pool again.

I logged out for about an hour and came back only to find the same thing once again.  But this time it pops up as 32 rigs while I was in the process of identifying the rig that was "supposedly down."

Is there any kind of explanation for this?  I have notifications set up in my Dashboard for an idol worker.  However, I don't think I've ever received a notification for idol worker.  How long does a worker have to be idol to get a notification, Sir?  Can we please have an option to set it for at least 5 minutes or less, Sir?  This concerns me.  I don't know if this is just a coincidence for me to log on at the time I'm seeing this occur.  I'm wondering if it's windows doing a update on different rigs.  I'm just not sure...

In any case, it would be nice to have the option to set the amount of time to pass for a notification if a worker is idle, please sir.

Thank you,

David

[m1n1ngP4d4w4n]

Default for IDLE worker is 15MN. check in your notification menu also that you checked IDLE WORKER. And that monitor box is checked for every of your workers.

Use the API to make your own monitoring too, That's what i do   Sometimes you get false positives (receiving idle mails when your workers are running normally) i checked this behaviour with reccurent API query, so i let email alert but i rely more on the API for monitoring.

[dmwardjr]

Default for IDLE worker is 15MN. check in your notification menu also that you checked IDLE WORKER. And that monitor box is checked for every of your workers.

Use the API to make your own monitoring too, That's what i do   Sometimes you get false positives (receiving idle mails when your workers are running normally) i checked this behaviour with reccurent API query, so i let email alert but i rely more on the API for monitoring.

Thumbs Up!

I did not have monitor checked on any of my workers.  Didn't realize I needed to.  Thx man.  Appreciate it.

[ocminer]

Hi !

Usually 15 Min as padawan stated already, but make sure your mailbox allows those mails, they often falsely get into spam folders.

Also make sure you're using the worker not on another suprnova pool as those mails are global i.e. if you're mining ZEC at zec.suprnova.cc and have yourworker.1 running there but are using another physical machine under the same workername on xmr.suprnova.cc you will NOT get notifications as the system thinks the worker was just switched to another pool.

[dmwardjr]

Hi !

Usually 15 Min as padawan stated already, but make sure your mailbox allows those mails, they often falsely get into spam folders.

Also make sure you're using the worker not on another suprnova pool as those mails are global i.e. if you're mining ZEC at zec.suprnova.cc and have yourworker.1 running there but are using another physical machine under the same workername on xmr.suprnova.cc you will NOT get notifications as the system thinks the worker was just switched to another pool.

Got it...

Thx Bro.

Cheers...

[armazingerz]

Thanx, but it leads me to a couple questions, I checked "My Account" -> "Edit workers" and the hashrate reading is much smaller than the reading from Claymore, which one is accurate?

In the dashboard, your contributors hashrate is measured in H/s and ZEC/Day, and I'm unable to do so much ZEC/Day per H/s. For example, right now I'm supposed to get 0'073 ZEC/day with 411 H/s (Dashboard reading) but actually I'm doing like 0'13 ZEC/Day with 1300 H/s (Claymore reading). There is a huge difference, because with the Dashboard ratio I should be doing 0'23 ZEC/Day instead of 0'13

@armazingerz:
Check "My Account" -> "Edit workers". You should see the full hashrate there, the Dashboard is cached for performance.


OVH seems to have a bigger issue at the moment, some routes are broken and the servers unreachable, I hope they'll fix it ASAP. From Suprnova's side everything is okay.

[ocminer]

Thanx, but it leads me to a couple questions, I checked "My Account" -> "Edit workers" and the hashrate reading is much smaller than the reading from Claymore, which one is accurate?

In the dashboard, your contributors hashrate is measured in H/s and ZEC/Day, and I'm unable to do so much ZEC/Day per H/s. For example, right now I'm supposed to get 0'073 ZEC/day with 411 H/s (Dashboard reading) but actually I'm doing like 0'13 ZEC/Day with 1300 H/s (Claymore reading). There is a huge difference, because with the Dashboard ratio I should be doing 0'23 ZEC/Day instead of 0'13

@armazingerz:
Check "My Account" -> "Edit workers". You should see the full hashrate there, the Dashboard is cached for performance.


OVH seems to have a bigger issue at the moment, some routes are broken and the servers unreachable, I hope they'll fix it ASAP. From Suprnova's side everything is okay.

Hi !

if your hashrate on "Edit Workers" is much smaller than what you're worker is actually reading there's something wrong. Maybe try to switch to another stratum server (zec.suprnova.cc:2142 instead of zec-eu.suprnova.cc:2142 (or vice versa)) and see if its better than.

The Dashboard is knowingly a bit slower and "lazier" in refreshing, but Edit Workers should match pretty close.. maybe +- 10 %

[m1n1ngP4d4w4n]

Default for IDLE worker is 15MN. check in your notification menu also that you checked IDLE WORKER. And that monitor box is checked for every of your workers.

Use the API to make your own monitoring too, That's what i do   Sometimes you get false positives (receiving idle mails when your workers are running normally) i checked this behaviour with reccurent API query, so i let email alert but i rely more on the API for monitoring.

Thumbs Up!

I did not have monitor checked on any of my workers.  Didn't realize I needed to.  Thx man.  Appreciate it.

Cheers  

Thanx, but it leads me to a couple questions, I checked "My Account" -> "Edit workers" and the hashrate reading is much smaller than the reading from Claymore, which one is accurate?

In the dashboard, your contributors hashrate is measured in H/s and ZEC/Day, and I'm unable to do so much ZEC/Day per H/s. For example, right now I'm supposed to get 0'073 ZEC/day with 411 H/s (Dashboard reading) but actually I'm doing like 0'13 ZEC/Day with 1300 H/s (Claymore reading). There is a huge difference, because with the Dashboard ratio I should be doing 0'23 ZEC/Day instead of 0'13

@armazingerz:
Check "My Account" -> "Edit workers". You should see the full hashrate there, the Dashboard is cached for performance.


OVH seems to have a bigger issue at the moment, some routes are broken and the servers unreachable, I hope they'll fix it ASAP. From Suprnova's side everything is okay.

Hi !

if your hashrate on "Edit Workers" is much smaller than what you're worker is actually reading there's something wrong. Maybe try to switch to another stratum server (zec.suprnova.cc:2142 instead of zec-eu.suprnova.cc:2142 (or vice versa)) and see if its better than.

The Dashboard is knowingly a bit slower and "lazier" in refreshing, but Edit Workers should match pretty close.. maybe +- 10 %

I had the same issues as you, but you just have to let the miner running for at least 24h before getting anything accurate. Share validation taking time, and all, usually look @ the daily result just before the day change to see what you have made , also rely on the API to get your current hashrate, it's more accurate than either the dashboard or workers. And don't take it @ face value either, you need to make an average taking the value every 5mn for at least 6h to get your real average. Because how's pool are working your hash will spike or drop depending where you are in your calculation and when the pool is receiving/processing your shares.

Example for me, on a rig that generate about 2500sols/s my lowest value is about 1700-1800, and spike @3400, but if you average all the 5mn values for a whole day, you will get back your hashrate as the daily average.

here is a little bit of log from my monitoring script, as you can see values change alot, if you do an average on thoses values taken every 8mn for about an hour, you get 2508s/sols, and for course average get alot more accurate with more values over a longer course of time, but you get the gist of it  

Code:

2017-01-09 15:16:01 - Zcash - SUPRNOVA API UP HTTP/1.1 200 OK
2017-01-09 15:16:11 - Current Zcash - Suprnova Hashrate is 3165 this is higher than current treshold 200, mining along :)
2017-01-09 15:24:01 - Zcash - SUPRNOVA API UP HTTP/1.1 200 OK
2017-01-09 15:24:12 - Current Zcash - Suprnova Hashrate is 2634 this is higher than current treshold 200, mining along :)
2017-01-09 15:32:01 - Zcash - SUPRNOVA API UP HTTP/1.1 200 OK
2017-01-09 15:32:12 - Current Zcash - Suprnova Hashrate is 2722 this is higher than current treshold 200, mining along :)
2017-01-09 15:40:02 - Zcash - SUPRNOVA API UP HTTP/1.1 200 OK
2017-01-09 15:40:12 - Current Zcash - Suprnova Hashrate is 1808 this is higher than current treshold 200, mining along :)
2017-01-09 15:48:01 - Zcash - SUPRNOVA API UP HTTP/1.1 200 OK
2017-01-09 15:48:12 - Current Zcash - Suprnova Hashrate is 2345 this is higher than current treshold 200, mining along :)
2017-01-09 15:56:01 - Zcash - SUPRNOVA API UP HTTP/1.1 200 OK
2017-01-09 15:56:12 - Current Zcash - Suprnova Hashrate is 2102 this is higher than current treshold 200, mining along :)
2017-01-09 16:00:01 - Zcash - SUPRNOVA API UP HTTP/1.1 200 OK
2017-01-09 16:00:12 - Current Zcash - Suprnova Hashrate is 2573 this is higher than current treshold 200, mining along :)
2017-01-09 16:08:02 - Zcash - SUPRNOVA API UP HTTP/1.1 200 OK
2017-01-09 16:08:12 - Current Zcash - Suprnova Hashrate is 2208 this is higher than current treshold 200, mining along :)
2017-01-09 16:16:01 - Zcash - SUPRNOVA API UP HTTP/1.1 200 OK
2017-01-09 16:16:12 - Current Zcash - Suprnova Hashrate is 2361 this is higher than current treshold 200, mining along :)
2017-01-09 16:24:01 - Zcash - SUPRNOVA API UP HTTP/1.1 200 OK
2017-01-09 16:24:12 - Current Zcash - Suprnova Hashrate is 2615 this is higher than current treshold 200, mining along :)
2017-01-09 16:32:01 - Zcash - SUPRNOVA API UP HTTP/1.1 200 OK
2017-01-09 16:32:12 - Current Zcash - Suprnova Hashrate is 3170 this is higher than current treshold 200, mining along :)
2017-01-09 16:40:02 - Zcash - SUPRNOVA API UP HTTP/1.1 200 OK
2017-01-09 16:40:13 - Current Zcash - Suprnova Hashrate is 2185 this is higher than current treshold 200, mining along :)

[ocminer]

I finally found the error which lead to a defunct dashboard for Anonymous users (mining with your wallet address) - fixed now and dashboard/payouts etc all working agian

[m1n1ngP4d4w4n]

I finally found the error which lead to a defunct dashboard for Anonymous users (mining with your wallet address) - fixed now and dashboard/payouts etc all working agian

Im not anonymous (mining with workers) but it wasn't working for me (dashboard), now it does, thx for the fix !

[m1n1ngP4d4w4n]

Hey OC, it seems that the zec dashboard broke again, we don't have any datas showing. (aside for the current block section)

thanks  

[ocminer]

Hey OC, it seems that the zec dashboard broke, we don't have any datas showing.

thanks 

Hmm, works for me, I can see my balance, my workers etc..

Maybe log out / close the browser and log in again ?

[m1n1ngP4d4w4n]

Hey OC, it seems that the zec dashboard broke, we don't have any datas showing.

thanks  

Hmm, works for me, I can see my balance, my workers etc..

Maybe log out / close the browser and log in again ?

Ok working again, had tried logout/login with no success, had to purge cache & cookies and all good, sorry man will try this the next time  

[ocminer]

Hey OC, it seems that the zec dashboard broke, we don't have any datas showing.

thanks 

Hmm, works for me, I can see my balance, my workers etc..

Maybe log out / close the browser and log in again ?

Ok working again, had tried logout/login with no success, had to purge cache & cookies and all good, sorry man will try this the next time 

Interesting, I've heard that two times now, are you using Firefox ?

[m1n1ngP4d4w4n]

Hey OC, it seems that the zec dashboard broke, we don't have any datas showing.

thanks  

Hmm, works for me, I can see my balance, my workers etc..

Maybe log out / close the browser and log in again ?

Ok working again, had tried logout/login with no success, had to purge cache & cookies and all good, sorry man will try this the next time  

Interesting, I've heard that two times now, are you using Firefox ?

Im using chromium.

Something i noticed on the dashboard, the unit for the current pool sol hashrate should be ksols and not sols same for global hashrate

Also why personnal hashrate marked as H/s and not sols/s is there a reason ?

[ocminer]

Hey OC, it seems that the zec dashboard broke, we don't have any datas showing.

thanks  

Hmm, works for me, I can see my balance, my workers etc..

Maybe log out / close the browser and log in again ?

Ok working again, had tried logout/login with no success, had to purge cache & cookies and all good, sorry man will try this the next time  

Interesting, I've heard that two times now, are you using Firefox ?

Im using chromium.

Something i noticed on the dashboard, the unit for the current pool sol hashrate should be ksols and not sols.

Also why personnal hashrate marked as H/s and not sols/s is there a reason ?

Fixed and fixed

[m1n1ngP4d4w4n]

Hey OC, it seems that the zec dashboard broke, we don't have any datas showing.

thanks  

Hmm, works for me, I can see my balance, my workers etc..

Maybe log out / close the browser and log in again ?

Ok working again, had tried logout/login with no success, had to purge cache & cookies and all good, sorry man will try this the next time  

Interesting, I've heard that two times now, are you using Firefox ?

Im using chromium.

Something i noticed on the dashboard, the unit for the current pool sol hashrate should be ksols and not sols.

Also why personnal hashrate marked as H/s and not sols/s is there a reason ?

Fixed and fixed

thx !

You forgot the global hashrate to fix ksols too   i edited my post after noticing it

[ocminer]

Thanks for the help !

[m1n1ngP4d4w4n]

Thanks for the help !

My pleasure

f*king loving the pool man, very nice work  

[gross]

Block 43501 is Orphaned and user PPLNS shares lost and no credit

[ocminer]

Block 43501 is Orphaned and user PPLNS shares lost and no credit

Just wait a bit, the pool pays the orphans as well

[ocminer]

>400 Sol/s on NVIDIA now:


https://bitcointalk.org/index.php?topic=1747789.msg17476918#msg17476918


No Devfee, no pool restrictions.

[ocminer]

I'll be lowering  confirmations needed for blocks on the pool in stages of 10 over the next days so you'll get your mined coins earlier as some requested

That means for current miners you'll get a big payment now and after that your normal round credits are paid out again on a regular basis

[m1n1ngP4d4w4n]

Cool, will it be the same for the ZCL pool ?

[ocminer]

Cool, will it be the same for the ZCL pool ?

If everything goes well on zec  -  yes!

[m1n1ngP4d4w4n]

Cool, will it be the same for the ZCL pool ?

If everything goes well on zec  -  yes!

 ok cool 

[ocminer]

Cool, will it be the same for the ZCL pool ?

If everything goes well on zec  -  yes!

 ok cool 

Confs on ZCL are now decreased as well

[m1n1ngP4d4w4n]

Cool, will it be the same for the ZCL pool ?

If everything goes well on zec  -  yes!

 ok cool  

Confs on ZCL are now decreased as well

Nice   thanks  

One question, is the poolwatch android app supposed to work / still working with the pool ? I can't get it to work i always get a connection error, even though the api key is fine, do you have any recommendation for a working app ?

Thanks

[ocminer]

Cool, will it be the same for the ZCL pool ?

If everything goes well on zec  -  yes!

 ok cool  

Confs on ZCL are now decreased as well

Nice   thanks  

One question, is the poolwatch android app supposed to work / still working with the pool ? I can't get it to work i always get a connection error, even though the api key is fine, do you have any recommendation for a working app ?

Thanks

Hi !

Yes, it should be working fine, I'll try the app today and let you know if it works for me. I can remember there were two different QR's and you need to scan the right one in order to be working with the App.

[m1n1ngP4d4w4n]

Cool, will it be the same for the ZCL pool ?

If everything goes well on zec  -  yes!

 ok cool  

Confs on ZCL are now decreased as well

Nice   thanks  

One question, is the poolwatch android app supposed to work / still working with the pool ? I can't get it to work i always get a connection error, even though the api key is fine, do you have any recommendation for a working app ?

Thanks

Hi !

Yes, it should be working fine, I'll try the app today and let you know if it works for me. I can remember there were two different QR's and you need to scan the right one in order to be working with the App.

I tried with either QR code i always get connection error (the poolwatch one is the bottom one). Thanks for testing , i also tried with ZCL, XMR, ZEC pool, same result.

[ocminer]

Cool, will it be the same for the ZCL pool ?

If everything goes well on zec  -  yes!

 ok cool  

Confs on ZCL are now decreased as well

Nice   thanks  

One question, is the poolwatch android app supposed to work / still working with the pool ? I can't get it to work i always get a connection error, even though the api key is fine, do you have any recommendation for a working app ?

Thanks

Hi !

Yes, it should be working fine, I'll try the app today and let you know if it works for me. I can remember there were two different QR's and you need to scan the right one in order to be working with the App.

I tried with either QR code i always get connection error (the poolwatch one is the bottom one). Thanks for testing , i also tried with ZCL, XMR, ZEC pool, same result.

Weird, I just tried the bottom image from this page:

https://zec.suprnova.cc/index.php?page=account&action=qrcode

With current Android Version of Poolwatch and it worked just fine

[m1n1ngP4d4w4n]

Weird, I just tried the bottom image from this page:

https://zec.suprnova.cc/index.php?page=account&action=qrcode

With current Android Version of Poolwatch and it worked just fine

Okay, dunno what's happening then, i have always a connection error. Will try from another android device maybe some incompatibility with my phone. Thanks for testing.

When you add your pool in the app you select "Other pool" right ?

EDIT: ok tried on my tablet, and it work fine, dunno why it doesn't on phone 

[ocminer]

Weird, I just tried the bottom image from this page:

https://zec.suprnova.cc/index.php?page=account&action=qrcode

With current Android Version of Poolwatch and it worked just fine

Okay, dunno what's happening then, i have always a connection error. Will try from another android device maybe some incompatibility with my phone. Thanks for testing.

When you add your pool in the app you select "Other pool" right ?

EDIT: ok tried on my tablet, and it work fine, dunno why it doesn't on phone 

Yes, other pool. The qr code basically is just an encoded URL to the api, when you scan the image an URL should appear, maybe you can check that URL for any implausibility

[m1n1ngP4d4w4n]

Good day oc'

Would it be possible to disable the sound of the dashboard by default or make it as a setting in the account setting ? A bit annoying to have to disable it every time you reload the site or go on it again

Otherwise everything work lovely, as usual good work !  

Thanks !

[ocminer]

great pool - came from NiceHash awhile back, stuck with suprnova ZEC for awhile then recently tried the likes of flypool and such.

suprnova just feels like a good pair of socks, and will be increasing my donation percentage accordingly once I get another card up and hashing :>

ty devs/admins.

Thanks for the great comment! 

Good day oc'

Would it be possible to disable the sound of the dashboard by default or make it as a setting in the account setting ? A bit annoying to have to disable it every time you reload the site or go on it again

Otherwise everything work lovely, as usual good work ! 

Thanks !

I'll add an option to permanently disable the sound to the account page

[m1n1ngP4d4w4n]

I'll add an option to permanently disable the sound to the account page

Thanks mate

[ocminer]

0 % fee Weekend

[m1n1ngP4d4w4n]

0 % fee Weekend

Yay \o/ thx !

[kisk]

0 % fee Weekend

Yay \o/ thx !

~happydance~

btw, been testing my new algo/coin switching app (win, linux later..) on a few pools and just wanted your thoughts... I want to config the app to just one pool ... maybe I'll add others later ... but your pool is missing a few coins/algos that miningpoolhub offers. Would you consider adding one or two? Right now mainly Digibyte->Skein which constantly has a great profit at certain times.

I'm getting better payouts on supr vs others but a few missing algos are keeping me from making a final decision.

[ocminer]

0 % fee Weekend

Yay \o/ thx !

~happydance~

btw, been testing my new algo/coin switching app (win, linux later..) on a few pools and just wanted your thoughts... I want to config the app to just one pool ... maybe I'll add others later ... but your pool is missing a few coins/algos that miningpoolhub offers. Would you consider adding one or two? Right now mainly Digibyte->Skein which constantly has a great profit at certain times.

I'm getting better payouts on supr vs others but a few missing algos are keeping me from making a final decision.

Sure, just let me know which coins you want, I'll make some calculations if the coin is profitable enough to keep it on the pool and then I'll happily add it. DGB Skein should be cool, I like DGB very much, I'll check for a free slot for that coin today !

[ocminer]

Congrats to all miners of the last 24h and last hour:



50% more in the last hour and 8% more over the last 24h

I'm looking for new 0% fee weekend names.. I had the Pink Motorboat weekend already, next one will probably be Yellow Pig Weekend .. After that maybe Red Aligator etc... If you have some ideas, let me know !

[m1n1ngP4d4w4n]

Congrats to all miners of the last 24h and last hour:



50% more in the last hour and 8% more over the last 24h

I'm looking for new 0% fee weekend names.. I had the Pink Motorboat weekend already, next one will probably be Yellow Pig Weekend .. After that maybe Red Aligator etc... If you have some ideas, let me know !

GG !

Orange Ostrich
Crimson Clam
White Walrus
Blue Buffalo

[ocminer]

Congrats to all miners of the last 24h and last hour:



50% more in the last hour and 8% more over the last 24h

I'm looking for new 0% fee weekend names.. I had the Pink Motorboat weekend already, next one will probably be Yellow Pig Weekend .. After that maybe Red Aligator etc... If you have some ideas, let me know !

GG !

Orange Ostrich
Crimson Clam
White Walrus
Blue Buffalo

Sounds great, I'll surely take one or two from those names for some 0%fee weekends !

[m1n1ngP4d4w4n]

feel free   if i come up with some more i'll post 

[giagge]

https://zec.suprnova.cc

WTF!!! Interval 13:07 to 20:45 anything ? 7 hours .




.

[ocminer]

https://zec.suprnova.cc

WTF!!! Interval 13:07 to 20




.

Any problems ?

[giagge]

Yes why no payment in 7 hours . My rig is every up .

[ocminer]

Yes why no payment in 7 hours . My rig is every up .

Hmm, according to logs you were not submitting shares.

My testrig was fine all the time:

[giagge]

EDIT: Sorry , its my miner , i have in housing , and read log now , 7 hours no connect to internet , modem problem .

Thanks for support .

[ocminer]

EDIT: Sorry , its my miner , i have in housing , and read log now , 7 hours no connect to internet , modem problem .

Thanks for support .

OK, no problem

[Finksy]

ZEC pool down?

[ocminer]

ZEC pool down?

Hmm, no looks good from here.. What issue do you have ?

[serendipitie]

I'm looking for some helpful advice.  I've inherited bitcoin and have no experience of this kind of thing.  I'm afraid to spend it or take it out because I can't be seen to have this money.  I'm reading that there are other cryptocurrencies that offer privacy.  Is ZCASH one of them?

[Finksy]

ZEC pool down?

Hmm, no looks good from here.. What issue do you have ?

Looks fine now, I was getting a "Update in progress, please check back" type of screen.  Also at the landing page suprnova.cc, it was showing the ZEC pool with no workers or hashrate at that time, even though all the others appeared fine.

[ocminer]

what is the payout threshold for anonymous mining ZEC?

0.01 zec

[hirokazu]

damn, this coin really have good life since launching..
something like this will replace bitcoin in one day.. 

[jambo110]

damn, this coin really have good life since launching..
something like this will replace bitcoin in one day.. 

Watch this space, wiseguy.

[november.rain]

Hello brothers,
I have some Ubuntu 16.04 LTS server, tried to setup miner but not successfull, is there anyone can help me?
I need full code to config server, download and run miner
thank you very much

[ocminer]

There was an issue with the Dashboard not updating correctly - fixed now !

[ocminer]

Happy Hippopotamus Week - 0 % fee on this pool until Friday !

[ocminer]

Great feedback on Happy Hippo week, stay tuned for some more promos soon !

[jamiec79]

Hi,

What diff setting should i use for 6 x rx470 8gb?

I saw on the suprnova main page it mentions 8192.... but i don't know whether that is too high or too low?

Any advice would be greatly appreciated.

Thank you

[ocminer]

Hi,

What diff setting should i use for 6 x rx470 8gb?

I saw on the suprnova main page it mentions 8192.... but i don't know whether that is too high or too low?

Any advice would be greatly appreciated.

Thank you

No, thats too high

You want to submit one share every 10-15 seconds. Usually vardiff is just fine for you and will figure out the optimal difficulty for you after about 2-3 minutes.

Just let it run for a few mins and you'll see that a certain diff has been set. You can then either leave it running like it is or set this difficulty manually by using d=XX in the password the next time you launch the miner.

[ocminer]

Asia stratum had a 5 min downtime this morning due to a unplanned reboot. All fine again

[marvykkio]

ocminer i have problem with address decred, i not remember my email, pls help

[ocminer]

ocminer i have problem with address decred, i not remember my email, pls help

uhm, what can I do for you ?

[marvykkio]

ocminer i have problem with address decred, i not remember my email, pls help

uhm, what can I do for you ?

I have too many emails stored on Suprnova, and I can not figure out what email I registered for decred currency, to enter my wallet
DsbPUmqCvfg1oAUiW5ueyAyU5sE95xafqNd

[ocminer]

ocminer i have problem with address decred, i not remember my email, pls help

uhm, what can I do for you ?

I have too many emails stored on Suprnova, and I can not figure out what email I registered for decred currency, to enter my wallet
DsbPUmqCvfg1oAUiW5ueyAyU5sE95xafqNd

check PM

[silentrunner]

What is the issue with the Statistics Pool > Contributor Hashrates?

The ZEC/Day does not seem correct at all.

I decided to jump in with 30k H/s.  The stats show I should be getting about 8 ZEC per day.

Code:

Rank	User Name  H/s         ZEC/Day	BTC/Day
12	vroom	   37,551.36	9.715	0.5829
13	devman	   35,151.99	9.094	0.5457
14	anonymous  33,700.96	8.719	0.5232
15	olpro	   32,389.50	8.380	0.5028

I checked whattomine.com and it says 3.7 ZEC/24Hrs  for 30k H/s.

So far I am getting less than 3 ZEC/24Hrs and losing $.

When is the stats pool page going to reflect a return closer to reality?  It is very misleading.

[ocminer]

Sorry the estimates are not 100% correct yet, www.whattomine.com is a better source for the calculations/estimates.

[induktor]

Hello
any ideas what is going on with this pool?, i have a big number of unconfirmed and blocks once they are confirmed are not being counted as confirmed on the page.

i followed closely, for instance, block 91207 and once it said confirmed go back to the main stats and i still have it as unconfirmed

can you please check what is happening? are we safe mining here? or should i switch to a backup for the time being?

my username is induktor
thank you
indkt

[induktor]

Yeah. Am having the same issue.

I seem to be getting credited, but round shares are dropping out then just sitting Unconfirmed.

huh! good to know that it's not just me.
switching to backup pool until this problem gets resolved 

[ocminer]

I've lowered confirmations for all users to a minimum of 60 blocks - that's what you might see, there is no issue from what I can see.

Edit : ah i see the live dashboard was lagging 30 blocks behind the actual payout - fixed

[induktor]

That was fast! 
Thanks, going back here then

[Oklawolf]

Been waiting for a manual payout over 2 hours now, balance and unconfirmed has not increased since that time - issues still going on?

[ocminer]

Been waiting for a manual payout over 2 hours now, balance and unconfirmed has not increased since that time - issues still going on?

Thanks for info, fixed !

[Oklawolf]

Confirmed - you da man!

[ocminer]

There was a sneaky, stealthy bonus of 20% for some of the last blocks, hope you got some of it

[VizzerdrixUA]

102053   13 minutes   18   93734 B   Suprnova
But pool dont know that it mined by it.

[ocminer]

102053   13 minutes   18   93734 B   Suprnova
But pool dont know that it mined by it.

Give it some time, it's still calculating the last round

[ocminer]

0% fee promo on the pool currently ! Expect some bonuses as well !

[rossie]

0% fee promo on the pool currently ! Expect some bonuses as well !

Yeah dude, at least something... 2 days ago its terrible

[Spankijs]

Can't do a manual payout for 5 hours now. doesnt show up anywhere, but screams at me, that one manual payment request active.
Nothing under transactions.
Thanks for the 0% tho:))

[ocminer]

Can't do a manual payout for 5 hours now. doesnt show up anywhere, but screams at me, that one manual payment request active.
Nothing under transactions.
Thanks for the 0% tho:))

Thanks for info, fixed

[Spankijs]

Can't do a manual payout for 5 hours now. doesnt show up anywhere, but screams at me, that one manual payment request active.
Nothing under transactions.
Thanks for the 0% tho:))

Thanks for info, fixed

Wow, that was fast! Thank you!

[ocminer]

0 % fee mining on the pool currently !

[ocminer]

0 % fee mining on the pool currently !

Still running, grab it while it's there

[Newuser16]

I'm having an issue with payouts,  I have not received my payouts in 3 days. Thr pools shows that the payment was confirmed but nothing in my wallet for the past 3 days. Anyone knows what might be happening ?

[ocminer]

I'm having an issue with payouts,  I have not received my payouts in 3 days. Thr pools shows that the payment was confirmed but nothing in my wallet for the past 3 days. Anyone knows what might be happening ?

Uh if that would be the issue I guess there would be a shitstorm here already with lots of users complaining

You should have a TXID in the corresponding payment, you can look that TXID up by clicking on it or by entering it manually on https://explorer.zcha.in

If it's there - it's good and you should check the receiving side for errors

[Newuser16]

I'm having an issue with payouts,  I have not received my payouts in 3 days. Thr pools shows that the payment was confirmed but nothing in my wallet for the past 3 days. Anyone knows what might be happening ?

Uh if that would be the issue I guess there would be a shitstorm here already with lots of users complaining

You should have a TXID in the corresponding payment, you can look that TXID up by clicking on it or by entering it manually on https://explorer.zcha.in

If it's there - it's good and you should check the receiving side for errors

Yep, I can see them the TXIDs on the explorer, but nothing is showing up on my ZCASH freewallet! I'll need to check with freewallet.
Thanks for the quick input.

[ocminer]

ccminer is now supported as well:



Use port 4142

https://github.com/tpruvot/ccminer/tree/equihash

Code:

ccminer.exe -a equihash -o stratum+tcp://zec.suprnova.cc:4142 -u suprnova.1 -p x

[ocminer]

Congrats miners, over the last 24h you've earned 20 % more than calculated

[joaogti36]

hard one this time.....
taking ages :-D

[ocminer]

hard one this time.....
taking ages :-D

No wonder after so many fast blocks

[ocminer]

0% fee over the weekend !

[Bloublou]

Hello everybody

I mined yesterday 0.0882 ZEC in anonymous mode. Do you know when will occur the payout ?

Thank you

[ocminer]

Hello everybody

I mined yesterday 0.0882 ZEC in anonymous mode. Do you know when will occur the payout ?

Thank you

Should happen when you hit 0.01 zec.

Did you register the payout address to a registered account before maybe?

[Bloublou]

I registered today. So yesterday it was only an anonymous mining with the adress in parameter.
I sent you a private message with the link of my dashboard

[levanid]

Hey, had been mining yesterday since 19:35:31 for around 40 minutes at ~0,45 Msols
As usual pool showed me some estimates in the beginning but then I had nothing showed on my balance. 12 hours have passed and still nothing


On my first attempt yesterday at 14:11:53 I had my balance confirmed 3 hours later.

What is going on there?

[ocminer]

Hey, had been mining yesterday since 19:35:31 for around 40 minutes at ~0,45 Msols
Us usual pool showed me some estimates in the beginning but then I had nothing showed on my balance. 12 hours have passed and still nothing


On my first attempt yesterday at 14:11:53 I had my balance confirmed 3 hours later.

What is going on there?

Hmm, was a block found during that time ? You should see some unconfirmed coins after the round has been finished.. Since yesterday there should now also be some confirmed coins when you're hashrate was recognized on the dashboard.

[levanid]

Thanks for response

You should see some unconfirmed coins after the round has been finished.. Since yesterday there should now also be some confirmed coins when you're h

That is exactly what I'm talking about. It showed round earnings estimations, which should move to "unconfirmed" balance, but for some reason it didn't and now dashboard shows just 0.00 on every table of my balance. How could that be possible?
I was mining yesterday at around 14 o'clock without any problems. But my latest mining seems completely missing

Please help me with my case. I already contacted support via e-mail but they are keeping silence

[levanid]

Thanks for response

You should see some unconfirmed coins after the round has been finished.. Since yesterday there should now also be some confirmed coins when you're h

That is exactly what I'm talking about. It showed round earnings estimations, which should move to "unconfirmed" balance, but for some reason it didn't and now dashboard shows just 0.00 on every table of my balance. How could that be possible?
I was mining yesterday at around 14 o'clock without any problems. But my latest mining seems completely missing

Please help me with my case. I already contacted support via e-mail but they are keeping silence

So 24 hours have passed since mining has been finished. But still no ZEC on my balance.
My userid is: 963812
Here is nicehash's order info https://www.dropbox.com/s/jryd00tqrri8c6x/nicehash_26June2017.png?dl=0

[ocminer]

Hmm extremely weird.. There are no known issues and there are no errors in the logs.. No idea what happened there tbh.

Was the Dashboard reporting your hash when you were mining ?

Hard to tell what happened there as the pool didn't seem to recognize you.. maybe you've mined at a failover pool or so ?

There is also not much for me what I can do here.. The hash was obviously not recognized by the pool, there must be an error somewhere, unsure where, however I'd recommend stopping your order at nicehash immediately when you see that your hashrate is not recognized on the pool.

[levanid]

Was the Dashboard reporting your hash when you were mining ?

Hard to tell what happened there as the pool didn't seem to recognize you.. maybe you've mined at a failover pool or so ?

There is also not much for me what I can do here.. The hash was obviously not recognized by the pool, there must be an error somewhere, unsure where, however I'd recommend stopping your order at nicehash immediately when you see that your hashrate is not recognized on the pool.

Configuration is 100% correct. I was mining with the same configuration 4 hour earlier and got everything correctly calculated.
Dashboard immediately recognized hashing being started and reported Round earning at around 0.8 ZEC

But then after nicehash order has been finished none of that money went to the balance.

Guys, thus way your commission equals to 100% I spent 0.05 BTC on nicehash order which went straight into oblivion for me and pure profit for zec.suprnova.com

[ocminer]

Was the Dashboard reporting your hash when you were mining ?

Hard to tell what happened there as the pool didn't seem to recognize you.. maybe you've mined at a failover pool or so ?

There is also not much for me what I can do here.. The hash was obviously not recognized by the pool, there must be an error somewhere, unsure where, however I'd recommend stopping your order at nicehash immediately when you see that your hashrate is not recognized on the pool.

Configuration is 100% correct. I was mining with the same configuration 4 hour earlier and got everything correctly calculated.
Dashboard immediately recognized hashing being started and reported Round earning at around 0.8 ZEC

But then after nicehash order has been finished none of that money went to the balance.

Guys, thus way your commission equals to 100% I spent 0.05 BTC on nicehash order which went straight into oblivion for me and pure profit for zec.suprnova.com

Well but why are there no logs on my side for the rental then ?!?!?

And why are there no other users reporting the same problem ? I can't debug / fix what I cannot see.

I can offer you some compensation for removing the fee for your account, however i can't reimburse your whole order, maybe you can talk to nicehash

[Mikanoshi]

So, if there is an anonymous mining to the same address that is in my account all I have to do is remove it and wait for the payment?

[ocminer]

So, if there is an anonymous mining to the same address that is in my account all I have to do is remove it and wait for the payment?

Yes. and if it doesn't work, message me the address and I will check

[levanid]

Was the Dashboard reporting your hash when you were mining?
Hard to tell what happened there as the pool didn't seem to recognize you.. maybe you've mined at a failover pool or so ?
There is also not much for me what I can do here.. The hash was obviously not recognized by the pool, there must be an error somewhere, unsure where, however I'd recommend stopping your order at nicehash immediately when you see that your hashrate is not recognized on the pool.

Configuration is 100% correct. I was mining with the same configuration 4 hour earlier and got everything correctly calculated.
Dashboard immediately recognized hashing being started and reported Round earning at around 0.8 ZEC

But then after nicehash order has been finished none of that money went to the balance.
Guys, thus way your commission equals to 100% I spent 0.05 BTC on nicehash order which went straight into oblivion for me and pure profit for zec.suprnova.com

Well but why are there no logs on my side for the rental then ?!?!?
And why are there no other users reporting the same problem ? I can't debug / fix what I cannot see.
I can offer you some compensation for removing the fee for your account, however i can't reimburse your whole order, maybe you can talk to nicehash

So, I provided you with screens of my order and your reply sounds like I'm lying to you?   I have no idea if that is recurring error and why no one yet contacted you with similar issues. I'm not lying, I'm not willing to fraud you.

What kind of extra information do you need from me? I could provide all the available data there, I could give you access to that account if you wish just to prove the order.

I had no problems with my first order on 26th of June which has been rewarded properly. I just require your help with my order Started
2017-06-26 19:35:31 and finished 2017-06-26 20:08:34

As I mentioned - few seconds since order has been placed zec.suprnova dashboard immediately showed hashing on the dashboard in Round Earning Estimations.
But after order has been depleted this estimated number moved to zero and nothing appeared on unconfirmed balance for me..

[ocminer]

Was the Dashboard reporting your hash when you were mining?
Hard to tell what happened there as the pool didn't seem to recognize you.. maybe you've mined at a failover pool or so ?
There is also not much for me what I can do here.. The hash was obviously not recognized by the pool, there must be an error somewhere, unsure where, however I'd recommend stopping your order at nicehash immediately when you see that your hashrate is not recognized on the pool.

Configuration is 100% correct. I was mining with the same configuration 4 hour earlier and got everything correctly calculated.
Dashboard immediately recognized hashing being started and reported Round earning at around 0.8 ZEC

But then after nicehash order has been finished none of that money went to the balance.
Guys, thus way your commission equals to 100% I spent 0.05 BTC on nicehash order which went straight into oblivion for me and pure profit for zec.suprnova.com

Well but why are there no logs on my side for the rental then ?!?!?
And why are there no other users reporting the same problem ? I can't debug / fix what I cannot see.
I can offer you some compensation for removing the fee for your account, however i can't reimburse your whole order, maybe you can talk to nicehash

So, I provided you with screens of my order and your reply sounds like I'm lying to you?   I have no idea if that is recurring error and why no one yet contacted you with similar issues. I'm not lying, I'm not willing to fraud you.

What kind of extra information do you need from me? I could provide all the available data there, I could give you access to that account if you wish just to prove the order.

I had no problems with my first order on 26th of June which has been rewarded properly. I just require your help with my order Started
2017-06-26 19:35:31 and finished 2017-06-26 20:08:34

As I mentioned - few seconds since order has been placed zec.suprnova dashboard immediately showed hashing on the dashboard in Round Earning Estimations.
But after order has been depleted this estimated number moved to zero and nothing appeared on unconfirmed balance for me..

I already pmed you... Check your inbox

[Orphzin]

Was the Dashboard reporting your hash when you were mining ?

Hard to tell what happened there as the pool didn't seem to recognize you.. maybe you've mined at a failover pool or so ?

There is also not much for me what I can do here.. The hash was obviously not recognized by the pool, there must be an error somewhere, unsure where, however I'd recommend stopping your order at nicehash immediately when you see that your hashrate is not recognized on the pool.

Configuration is 100% correct. I was mining with the same configuration 4 hour earlier and got everything correctly calculated.
Dashboard immediately recognized hashing being started and reported Round earning at around 0.8 ZEC

But then after nicehash order has been finished none of that money went to the balance.

Guys, thus way your commission equals to 100% I spent 0.05 BTC on nicehash order which went straight into oblivion for me and pure profit for zec.suprnova.com

i think i got the same problema today... on miningpoolhub and now on suprnova...
yesterdat everything was fine...

[ocminer]

I've added a warning on the pool not to use Nicehash now.

[Orphzin]

yeah...

here is my problem.
What I can not understand, is that in the dashboard I had valid shares and estimated balance .... but drained for 0 ...

take a look
Orphzin 23.xxx.xxx shares


picture when i got home and send to a friend to show de low profit


Screen that I took before when I posted here


my balance now...after the block is finish...


My doubts is, how I did not get any ZEC even having valid share in the pool?

here is my order on nicehash... a fixed order limited a 0.1
put the order and leave...after 1hour... i got the surprise...



my post on miningpoolhub topic, https://bitcointalk.org/index.php?topic=472510.msg19826020#msg19826020
But la, it was a little less worse, I got a bit of zec

But nothing compared to any calculator

[levanid]

Configuration is 100% correct. I was mining with the same configuration 4 hour earlier and got everything correctly calculated.
Dashboard immediately recognized hashing being started and reported Round earning at around 0.8 ZEC

But then after nicehash order has been finished none of that money went to the balance.
Guys, thus way your commission equals to 100% I spent 0.05 BTC on nicehash order which went straight into oblivion for me and pure profit for zec.suprnova.com

I already pmed you... Check your inbox

Any updates there? Obviously there is some kind of misconfiguration going there on suprnova.
What I found is that you had zcash hotfix update implemented on the same time I have been mining 19:35:31-20:08:34 – here is a proof from suprnova's official twitter account dated 20:03.
That could possibly lead to balance dissappearing from estimations and never appearing on account balance

[ocminer]

Configuration is 100% correct. I was mining with the same configuration 4 hour earlier and got everything correctly calculated.
Dashboard immediately recognized hashing being started and reported Round earning at around 0.8 ZEC

But then after nicehash order has been finished none of that money went to the balance.
Guys, thus way your commission equals to 100% I spent 0.05 BTC on nicehash order which went straight into oblivion for me and pure profit for zec.suprnova.com

I already pmed you... Check your inbox

Any updates there? Obviously there is some kind of misconfiguration going there on suprnova.
What I found is that you had zcash hotfix update implemented on the same time I have been mining here is a proof form suprnova officital twitter account. That could lead to balance dissappearing from estimations and never appeared on account balance

There is 100% no error on suprnova, guaranteed no misconfiguration and the hotfix has nothing todo with stratums, it's just a daemon update.

Since many other users are complaining about similar issues on mph as well, I assume it's a nicehash issue.

[Mikanoshi]

Yes. and if it doesn't work, message me the address and I will check

PMed, I think hanging for 6 hours means it's not working automatically)

[Orphzin]

Configuration is 100% correct. I was mining with the same configuration 4 hour earlier and got everything correctly calculated.
Dashboard immediately recognized hashing being started and reported Round earning at around 0.8 ZEC

But then after nicehash order has been finished none of that money went to the balance.
Guys, thus way your commission equals to 100% I spent 0.05 BTC on nicehash order which went straight into oblivion for me and pure profit for zec.suprnova.com

I already pmed you... Check your inbox

Any updates there? Obviously there is some kind of misconfiguration going there on suprnova.
What I found is that you had zcash hotfix update implemented on the same time I have been mining here is a proof form suprnova officital twitter account. That could lead to balance dissappearing from estimations and never appeared on account balance

There is 100% no error on suprnova, guaranteed no misconfiguration and the hotfix has nothing todo with stratums, it's just a daemon update.

Since many other users are complaining about similar issues on mph as well, I assume it's a nicehash issue.

but how do we got shares on suprnova??? and 0 zec on final balance?

[ocminer]

Configuration is 100% correct. I was mining with the same configuration 4 hour earlier and got everything correctly calculated.
Dashboard immediately recognized hashing being started and reported Round earning at around 0.8 ZEC

But then after nicehash order has been finished none of that money went to the balance.
Guys, thus way your commission equals to 100% I spent 0.05 BTC on nicehash order which went straight into oblivion for me and pure profit for zec.suprnova.com

I already pmed you... Check your inbox

Any updates there? Obviously there is some kind of misconfiguration going there on suprnova.
What I found is that you had zcash hotfix update implemented on the same time I have been mining here is a proof form suprnova officital twitter account. That could lead to balance dissappearing from estimations and never appeared on account balance

There is 100% no error on suprnova, guaranteed no misconfiguration and the hotfix has nothing todo with stratums, it's just a daemon update.

Since many other users are complaining about similar issues on mph as well, I assume it's a nicehash issue.

but how do we got shares on suprnova??? and 0 zec on final balance?

If your hashrate is not recognized by the pool (on the dashboard) - you don't get any balance.

[Orphzin]

Configuration is 100% correct. I was mining with the same configuration 4 hour earlier and got everything correctly calculated.
Dashboard immediately recognized hashing being started and reported Round earning at around 0.8 ZEC

But then after nicehash order has been finished none of that money went to the balance.
Guys, thus way your commission equals to 100% I spent 0.05 BTC on nicehash order which went straight into oblivion for me and pure profit for zec.suprnova.com

I already pmed you... Check your inbox

Any updates there? Obviously there is some kind of misconfiguration going there on suprnova.
What I found is that you had zcash hotfix update implemented on the same time I have been mining here is a proof form suprnova officital twitter account. That could lead to balance dissappearing from estimations and never appeared on account balance

There is 100% no error on suprnova, guaranteed no misconfiguration and the hotfix has nothing todo with stratums, it's just a daemon update.

Since many other users are complaining about similar issues on mph as well, I assume it's a nicehash issue.

but how do we got shares on suprnova??? and 0 zec on final balance?

If your hashrate is not recognized by the pool (on the dashboard) - you don't get any balance.

But if I could get shares on that block

How can my final balance be 0?

And yes, when I started mining, there was hashrate in the pool, but I did not take printscreen, and when I got home, it was over.

[ocminer]

Configuration is 100% correct. I was mining with the same configuration 4 hour earlier and got everything correctly calculated.
Dashboard immediately recognized hashing being started and reported Round earning at around 0.8 ZEC

But then after nicehash order has been finished none of that money went to the balance.
Guys, thus way your commission equals to 100% I spent 0.05 BTC on nicehash order which went straight into oblivion for me and pure profit for zec.suprnova.com

I already pmed you... Check your inbox

Any updates there? Obviously there is some kind of misconfiguration going there on suprnova.
What I found is that you had zcash hotfix update implemented on the same time I have been mining here is a proof form suprnova officital twitter account. That could lead to balance dissappearing from estimations and never appeared on account balance

There is 100% no error on suprnova, guaranteed no misconfiguration and the hotfix has nothing todo with stratums, it's just a daemon update.

Since many other users are complaining about similar issues on mph as well, I assume it's a nicehash issue.

but how do we got shares on suprnova??? and 0 zec on final balance?

If your hashrate is not recognized by the pool (on the dashboard) - you don't get any balance.

But if I could get shares on that block

How can my final balance be 0?

And yes, when I started mining, there was hashrate in the pool, but I did not take printscreen, and when I got home, it was over.

I see you have credit, but you've not yet reached the minimal withdraw limit, it's 0.001 ZEC and you have 0.0008 zec

[Orphzin]

Configuration is 100% correct. I was mining with the same configuration 4 hour earlier and got everything correctly calculated.
Dashboard immediately recognized hashing being started and reported Round earning at around 0.8 ZEC

But then after nicehash order has been finished none of that money went to the balance.
Guys, thus way your commission equals to 100% I spent 0.05 BTC on nicehash order which went straight into oblivion for me and pure profit for zec.suprnova.com

I already pmed you... Check your inbox

Any updates there? Obviously there is some kind of misconfiguration going there on suprnova.
What I found is that you had zcash hotfix update implemented on the same time I have been mining here is a proof form suprnova officital twitter account. That could lead to balance dissappearing from estimations and never appeared on account balance

There is 100% no error on suprnova, guaranteed no misconfiguration and the hotfix has nothing todo with stratums, it's just a daemon update.

Since many other users are complaining about similar issues on mph as well, I assume it's a nicehash issue.

but how do we got shares on suprnova??? and 0 zec on final balance?

If your hashrate is not recognized by the pool (on the dashboard) - you don't get any balance.

But if I could get shares on that block

How can my final balance be 0?

And yes, when I started mining, there was hashrate in the pool, but I did not take printscreen, and when I got home, it was over.

I see you have credit, but you've not yet reached the minimal withdraw limit, it's 0.001 ZEC and you have 0.0008 zec

Yes, i have credit NOW because i start mining with my home hardware... It has nothing to do with my previous posts where I show YESTERDAY's shares

[Orphzin]

Nicehash is ok now? I saw that they took the warning, someone already tested?

[ocminer]

Nicehash is ok now? I saw that they took the warning, someone already tested?

I made some tests the last days and all. Of them worked well

[h!ghC]

Hi,

does zcash mining via suprnova currently work for you?
During the last days my hash rate was constant like always, at least that is what i can see from my mining program (claymore). but my mining amount on suprnova is much lower. Also the earnings during last hour was at 0.0 a few hours ago (but my miner was working and the dashboard on suprnova showed progress) and currently my earnings during the last hour is at 0.00036870, which is still very low. Are there any problems at suprnova??

[ocminer]

Hi,

does zcash mining via suprnova currently work for you?
During the last days my hash rate was constant like always, at least that is what i can see from my mining program (claymore). but my mining amount on suprnova is much lower. Also the earnings during last hour was at 0.0 a few hours ago (but my miner was working and the dashboard on suprnova showed progress) and currently my earnings during the last hour is at 0.00036870, which is still very low. Are there any problems at suprnova??

No problems at all, difficulty is sky high now for zec. a lot of people are mining it and therefore the reward is lower for everyone. We also had a little streak of bad luck during the last days but it's already getting better.

[igotek]

How to get notification email if one of our workers goes offline ?

[Orphzin]

Nicehash is ok now? I saw that they took the warning, someone already tested?

I made some tests the last days and all. Of them worked well

Hi, If my hashpower ends before the end of the block, do I end up with no reward?

Because yesterday I mined 2 blocks and received normally, but in the third, I had estimated earnings, and went to sleep, when I woke up today, I saw that I did not gain anything referring to that third block

[ocminer]

Nicehash is ok now? I saw that they took the warning, someone already tested?

I made some tests the last days and all. Of them worked well

Hi, If my hashpower ends before the end of the block, do I end up with no reward?

Because yesterday I mined 2 blocks and received normally, but in the third, I had estimated earnings, and went to sleep, when I woke up today, I saw that I did not gain anything referring to that third block

Usually you get a proportional amount of the shares you've mined the block for.

However there much trouble with nicehash lately

[Orphzin]

Nicehash is ok now? I saw that they took the warning, someone already tested?

I made some tests the last days and all. Of them worked well

Hi, If my hashpower ends before the end of the block, do I end up with no reward?

Because yesterday I mined 2 blocks and received normally, but in the third, I had estimated earnings, and went to sleep, when I woke up today, I saw that I did not gain anything referring to that third block

Usually you get a proportional amount of the shares you've mined the block for.

However there much trouble with nicehash lately

I think I'm very unlucky then...

Because in the same order I did, I got everything right for block 144061 and 144066 (Which my order went through the whole block)

But in block 144142 (which was a block that took longer than expected, 213%), when I went to sleep(My hashpower was already over), it was at approximately 110% (and estimated gain of 0.09zec). I thought I'd get at least half that, since it took twice as long.

[dogjunior]

My account has been locked for days now and I have not been send a link to reset and I have sent messages to the admins and no response. What is going on?

[ocminer]

My account has been locked for days now and I have not been send a link to reset and I have sent messages to the admins and no response. What is going on?

Go to https://unlock.suprnova.cc

[dogjunior]

My account has been locked for days now and I have not been send a link to reset and I have sent messages to the admins and no response. What is going on?

Go to https://unlock.suprnova.cc

Thanks. I don't know why my messages have not been getting thru.

[tyfreak]

Contact form on zcash pool is not working, so I'm writing here.
Recently I decided to mine some zcash on nicehash. And it was simple as it was: I had 10ksols, pool hashrate 8msols and 0.012zec per found solution. Then I had again 10ksols, pool hashrate 13msols and 0.08zec per found solution. Okay, I thought, more pool hashrate less payment, but we find solutions more often. And then I had 20 ksols, pool hashrate 13msols and 0.015zec per found solution, it's okay. And! there was you know, long-long block 3.5 hours to calculate. Pool hashrate dropped to 8msols, at last we found this block. And payment was 0.016. Can you explain it? We have payment 0.015-0.016 per found block at 13msols pool hashrate and we have 0.015-0.016 payment at pool hashrate 8msols. Instead of 0.022-0.024. Maybe I'm missing something.

[tyfreak]

Sorry, false alarm, just found this really-really long block, found my transactions, and - 0.021zec was payment. So it was unfortunate, but fair

[raven1322]

Hi there! I started mining zcash anonymously on suprnova a few days ago. After a little backread, I found that reusing a zcash address from a registered account would result to unpaid shares on the anon account. And that changing the address on either the registered or anon account would fix this. So I changed the address on my registered account, thus the anon account's address is now unique. I did this yesterday (almost 24 hours ago), but still the auto payout for the anon account has not yet triggered (I have more than 0.01zec confirmed balance already). How long should I wait for the auto payout to trigger? Thanks for any info!

[ocminer]

Hi there! I started mining zcash anonymously on suprnova a few days ago. After a little backread, I found that reusing a zcash address from a registered account would result to unpaid shares on the anon account. And that changing the address on either the registered or anon account would fix this. So I changed the address on my registered account, thus the anon account's address is now unique. I did this yesterday (almost 24 hours ago), but still the auto payout for the anon account has not yet triggered (I have more than 0.01zec confirmed balance already). How long should I wait for the auto payout to trigger? Thanks for any info!

PM me the address and I'll check it

[deadmouse3]

I've rent some mining power on nicehash today for 0.009 btc and started mining on that pool. At the block 167230 my reward was 0.0092 ZEC. After that I've put all my rented power to mine the next block which was found after 6 hours. In dashboard there was some earnings, but when block 167366 was found, earnings just gone. In the statistics I have no shares for that block also for some reason.

At the end of the experiment I spent 0.009 btc on nicehash and got the 0.009 ZEC on suprnova pool. 

[philipma1957]

Hi there! I started mining zcash anonymously on suprnova a few days ago. After a little backread, I found that reusing a zcash address from a registered account would result to unpaid shares on the anon account. And that changing the address on either the registered or anon account would fix this. So I changed the address on my registered account, thus the anon account's address is now unique. I did this yesterday (almost 24 hours ago), but still the auto payout for the anon account has not yet triggered (I have more than 0.01zec confirmed balance already). How long should I wait for the auto payout to trigger? Thanks for any info!

PM me the address and I'll check it

I seem to have an issue like this sending a pm

[Pakal]

Ocminer, I've tried to contact suprnova via Twitter, email to admin@suprnova.cc,  filling up the webform of the website and ultimately a pm to your bitcointalk.org account. NO reply at all. I'd appreciate a response since I am missing 0.04 BTC from my payouts.

[djn053]

 
I test and feel very bad.......

Have no Paymonent data........and no useful help.

[MrMaulwurf]

Hey,

why was "Round Progress" about 300% and after the block was found Luck was 154%? Did I miss something?

[ocminer]

Ocminer, I've tried to contact suprnova via Twitter, email to admin@suprnova.cc,  filling up the webform of the website and ultimately a pm to your bitcointalk.org account. NO reply at all. I'd appreciate a response since I am missing 0.04 BTC from my payouts.

I don't see any PM's regarding this issue, however, the pool is paying in ZEC, not BTC. If you've rented hash @ nicehash and paid a certain amount and got less than expected, that might be due to an unlucky round. Try the same on a different pool over a few rounds and you'll see the results are the same.

I test and feel very bad.......

Have no Paymonent data........and no useful help.

Hmm.. I don't see your question here ? What's the problem ?

Hey,

why was "Round Progress" about 300% and after the block was found Luck was 154%? Did I miss something?

Maybe there was a difficulty retarget after or while the block was found.

[a4si]

Anybody else has issues with conneting to the pool? Was working fine untill cca 2h ago, now I only get "detected new work" and nothing happens after that.

Using EWBF 0.3.4b

[ocminer]

Should all be fine again

[UnknownX]

zen.suprnova.cc is down

[depp051]

is there anyway to change my wallet from anonymous to registered account?

[raven1322]

is there anyway to change my wallet from anonymous to registered account?

ocminer should be able to help you with that. try sending him a message.

[avirdoz]

Pool reports low hashrate, will restart workers and check again.

[MJPC]

I'm really horrible at finding my way through these forums...

I apologize in advance.

I'm also not sure if I'm having an issue, but it's driving me crazy wondering so I figured I'd come to the source to verify.


Started Mining Zec, via EWBF miner on smos.  Mined for a complete day with no issues, did pretty well.  My miner shows accepting shares, good sol/s, temp, etc, everything performing as it should...

however, when I got to zec.suprnova and log in... NOTHING is registering.  All previous transactions have been confirmed, there are no unconfirmed. last block on the pool is 250923, many hours ago... and everything just seems to have stopped moving.

My miner hasn't stopped... I'm getting good shares accepted.  But nothing on my suprnova account.

Is that normal?  Has the pool just ceased to get blocks?  Is that possible/normal?  When will I make money again?  haha.

Thanks!

[gazzetta]

I'm really horrible at finding my way through these forums...

I apologize in advance.

I'm also not sure if I'm having an issue, but it's driving me crazy wondering so I figured I'd come to the source to verify.


Started Mining Zec, via EWBF miner on smos.  Mined for a complete day with no issues, did pretty well.  My miner shows accepting shares, good sol/s, temp, etc, everything performing as it should...

however, when I got to zec.suprnova and log in... NOTHING is registering.  All previous transactions have been confirmed, there are no unconfirmed. last block on the pool is 250923, many hours ago... and everything just seems to have stopped moving.

My miner hasn't stopped... I'm getting good shares accepted.  But nothing on my suprnova account.

Is that normal?  Has the pool just ceased to get blocks?  Is that possible/normal?  When will I make money again?  haha.

Thanks!

Double and triple check your SN username is correct

Double and triple check your miner name/password you are using in your smos string is correct and already registered at SN > MY ACCOUNT > MY WORKERS correctly (do you have the tick for your miner under the ACTIVE column? https://www.screencast.com/t/4R3uCQ23 ..  if you don't then SN isn't receiving your data)

Double check your server and port values in the EWBF string

BTW, get a few extra sols by using DSTM instead of EWBF

[silostoybox]

New to mining and I am trying to mine ZCash with EWBF Zec Miner 0.3.4b (I'd be open to a better one if I could find one), through SuprNova pool but I can't seem to get the SuprNova site to show that my worker is active. I read multiple post that says I should make sure my (user), (Password) and (port) are correct? I think they are correct and still not showing anything on the SuprNova my account worker still shows X and my dashboard shows 0.00 Sol/s. So I know I have something incorrect.
The API shows it is connected to the server.

From the default setup when installing the EWBF it looks like the user should be your --payment address.rig name  --pass x -- port 2142. This may be what I have incorrect. any help would be awsome. if the payment address doesn't go here? where do I put it?

here is what I have in the suprnova.bat file
miner --server zec.suprnova.cc --user t1aYfzQx5N7qmCK8W5YZgsaQATpjEWXAhi5.gateway --pass x --port 2142 --api 127.0.0.1:42000

on SuprNova it says my worker login in my user.worker am I supposed to put both in the user after the payment address?

[killerelite]

I want to withdraw my zcash from the pool but can't login .

[killerelite]

I want to withdraw my zcash from the pool but can't login .

Zec pool still down, and still no reply from the the pool owner here or in pm .
Anyone can point me to where I can contact the dev would be appreciated .

[killerelite]

https://zec.suprnova.cc/
Can't even open pool website now . say "Error connecting to database"
Still hoping for a reply from dev ocminer.

[Steadyclick]

Ocminer,

How do I get access to my Zcash (ZEC) coins that were still in the ZEC pool before you closed it?