[ANN] cudaMiner & ccMiner CUDA based mining applications [Windows/Linux/MacOSX]

[Andre345678]

i use this command before, and i have 1700khash ((((

yeah ,my hashrate is a bit low too , i believe .
since my GPU load is low and very variable.

it is supose to be higher i think, and GPU utilization needs to stay away .
but it does NOT and kicks in , then my clocks go lower

i think if  ccminer could do desktop interactive disabled i get better performance , but i dunno for sure .  
i am not the expert.
but on cudaminer , it makes a world of difference for my GTX 780 lightning

[ghur]

i use this command before, and i have 1700khash ((((

That sounds like about what you should be expecting.

[Sglasio]

my record
[2014-05-12 22:38:09] accepted: 2/2 (100.00%), 1799 khash/s (yay!!!)
[2014-05-12 22:38:33] thread 0: 44827875 hashes, 1809 khash/s
[2014-05-12 22:38:34] accepted: 3/3 (100.00%), 1809 khash/s (yay!!!)
[2014-05-12 22:38:40] Stratum detected new block
[2014-05-12 22:38:40] thread 0: 11141121 hashes, 1782 khash/s
[2014-05-12 22:38:44] Stratum detected new block
[2014-05-12 22:38:44] thread 0: 7340033 hashes, 1835 khash/s
[2014-05-12 22:39:16] thread 0: 59301039 hashes, 1815 khash/s
[2014-05-12 22:39:17] accepted: 4/4 (100.00%), 1815 khash/s (yay!!!)

[ZeroFossilFuel]

I am using evga gtx 750 ti SC but i am not able to get my card to run 1.7 mh for x11. Its only running 1.2 - 1.3 mh. All my setting is +0. The gpu load always run around 70% TDP 50%. I am using windows 8.1. Need advise to improve hashrate.

Try Kopiemtu then:
https://litecointalk.org/index.php?topic=16800.0

with Palit StormX Dual, factory settings:

[2014-05-12 15:08:29] Stratum detected new block
[2014-05-12 15:09:42] thread 0: 101485760 hashes, 1850 khash/s
[2014-05-12 15:09:42] accepted: 1557/1559 (99.87%), 5544 khash/s (yay!!!)

BTW:

Good job, Christian!
(and looking forward for this 2.7MH/s ultimate X11 killer )

does KopiemTu works on windows ?

no, it's linux OS ready for mining (Kubuntu based)
but it's extremaly simple to start and use, even you are not familiar with Linux yet

Whoa! This is right up my alley. Looks like a good candidate for one of my hard drive partitions. I know what I'll be doing tonight.

[EfterlysT]

Does the x11 version of ccminer support older cards ? Like gtx580 and even older ? Why i ask is that i have loads of old nvidia gpus laying around.

[Andre345678]

this is not right , my clocks are not stable because of GPU utilization .
i can choose lower O.C.  , but it will still kick in.
http://i99.photobucket.com/albums/l293/akira_010/Naamloos_zps9b108acd.png





perfcap reason  needs to look like this :
http://i99.photobucket.com/albums/l293/akira_010/Naamloos2_zps298fad40.png

[Scott J]

Any help here would be appreciated...

It seems to be working, but whichever pool I connect to, my workers show as inactive.



I am on a GeForce GT 530 and I have just installed the latest drivers.

[ghur]

Any help here would be appreciated...

It seems to be working, but whichever pool I connect to, my workers show as inactive.

<snip>

I am on a GeForce GT 530 and I have just installed the latest drivers.

You're using the wrong miner, generally look up your card on https://developer.nvidia.com/cuda-gpus

Though, I don't see your card listed. So you should try the lowest one.
If that doesn't work, your card doesn't have the right support for cuda.

edit: That card seems to have compute capability 2.1.
So ccminer30, 35, 50, etc won't work. Look for ccminer21 or 20. (not sure if these are bundled, but I know someone made a build compatible for these older cards)

[Andre345678]

Any help here would be appreciated...

It seems to be working, but whichever pool I connect to, my workers show as inactive.

"image"

I am on a GeForce GT 530 and I have just installed the latest drivers.

i am not sure a GT530 is compute 3.0 or compute 3.5 .
might be that GT530 is older compute.

i would try ccminer30.exe , maybe that one will work.
your speed is not accurate either , unless you got a super ultra TITAN


and maybe add  -d 0   to the command line , ( -d 0 = device 0 =  gpu 1 )

[ghur]

Any help here would be appreciated...

It seems to be working, but whichever pool I connect to, my workers show as inactive.



I am on a GeForce GT 530 and I have just installed the latest drivers.

i am not sure a GT530 is compute 3.0 or compute 3.5 .
might be that GT530 is older compute.

i would try ccminer30.exe

and maybe add  -d 0   to the command line , ( -d0 = device 0 =  gpu 1 )

It's compute 2.1, ccminer30 still won't work.

[DemosMirak]

Does the x11 version of ccminer support older cards ? Like gtx580 and even older ? Why i ask is that i have loads of old nvidia gpus laying around.

Ok guys, there was someone on github that seems to have found a way to compile an X11 miner for older cards with compute capability 2.1 (maybe 2.0 too).
I've compiled that for myself and psterryl tested it on his 2x gtx560ti's and they ran at almost 1.5MH X11 each, which is plain awesome.

You can compile it for yourself with compute_20,sm_21 & MAXWELL_OR_FERMI at 0.
For those who can't compile, I have it here: https://mega.co.nz/#!gBlGVZbT!0Pxo_T1P89UWmC866NVFIwEd3MJaAfRsdO8L5p4uvz0
Note: Quarkcoin, Jackpotcoin & Animecoin had to be dropped in order for this to work.

The Support for 2.0 is not a question of compiler-setup. Maybe it will work now (no idea), but this is not forever (we're working on simd right now, and our current dev Version will not work with compute < 3.0). With Quark, the compaction will not run... and so on

Christian

Yeah, I know about that But this is just giving an X11 miner for them old cards so they can have something to hash at once the big scrypt asics ruin everything. 1.5MH isn't that bad at all
Once you'll add those new simd algo's and killer-groestl this won't work anymore, but it works now
Can't wait to see your work on the new algo's though. My 750TI's are waiting But you guys have delivered impressive work already, I'm so excited.

EDIT: Just got a report incoming, 'AltcoinGamer' gets 170-190kh/s on his gtx620

The card you mentioned is CUDA 2.0, so this inofficial version should support that, as for official versions, cuda 2.0 support was dropped as of 0.6, or 0.5, I don't remember it all that good.

[Scott J]

Thanks for the help guys, I will try to track down ccminer20 or 21.

[opus.224]

Using Windows XP 32bit.

Palit GTX 750 Ti StormX Dual; OC@+50/0:

[2014-05-12 18:04:55] thread 0: 17290951 hashes, 1945 khash/s
[2014-05-12 18:04:56] accepted: 188/188 (100.00%), 1945 khash/s (yay!!!)
[2014-05-12 18:04:59] thread 0: 6140471 hashes, 1945 khash/s
[2014-05-12 18:04:59] accepted: 189/189 (100.00%), 1945 khash/s (yay!!!)
[2014-05-12 18:05:02] thread 0: 6575933 hashes, 1948 khash/s
[2014-05-12 18:05:02] accepted: 190/190 (100.00%), 1948 khash/s (yay!!!)
[2014-05-12 18:05:10] thread 0: 16190486 hashes, 1951 khash/s
[2014-05-12 18:05:11] accepted: 191/191 (100.00%), 1951 khash/s (yay!!!)
[2014-05-12 18:05:12] thread 0: 3559482 hashes, 1931 khash/s
[2014-05-12 18:05:12] accepted: 192/192 (100.00%), 1931 khash/s (yay!!!)

ASUS GTX750TI-OC-2GD5; OC@+100/0:

[2014-05-12 18:07:26] thread 0: 1676342 hashes, 1788 khash/s
[2014-05-12 18:07:26] accepted: 234/234 (100.00%), 1788 khash/s (yay!!!)
[2014-05-12 18:07:28] thread 0: 3047070 hashes, 1789 khash/s
[2014-05-12 18:07:28] accepted: 235/235 (100.00%), 1789 khash/s (yay!!!)
[2014-05-12 18:07:36] thread 0: 14452160 hashes, 1817 khash/s
[2014-05-12 18:07:36] accepted: 236/236 (100.00%), 1817 khash/s (yay!!!)
[2014-05-12 18:07:36] thread 0: 757350 hashes, 1795 khash/s
[2014-05-12 18:07:36] accepted: 237/237 (100.00%), 1795 khash/s (yay!!!)
[2014-05-12 18:07:38] thread 0: 3479074 hashes, 1810 khash/s
[2014-05-12 18:07:38] accepted: 238/238 (100.00%), 1810 khash/s (yay!!!)

ccminer50 -s 1 -a x11 -o pool:port -u wallet_address -p x

In Windows 8.1_64 I got 5-10% lower results with same settings!!
Didn't test Win7 or Linux.

[7854587]

Any help here would be appreciated...

It seems to be working, but whichever pool I connect to, my workers show as inactive.

https://i.imgur.com/u6JalgU.png

I am on a GeForce GT 530 and I have just installed the latest drivers.

My GTS450 521K is normal
Maybe you can use your software to me, OK?

[leofur]

Using Windows XP 32bit.

Palit GTX 750 Ti StormX Dual; OC@+50/0:

[2014-05-12 18:04:55] thread 0: 17290951 hashes, 1945 khash/s
[2014-05-12 18:04:56] accepted: 188/188 (100.00%), 1945 khash/s (yay!!!)
[2014-05-12 18:04:59] thread 0: 6140471 hashes, 1945 khash/s
[2014-05-12 18:04:59] accepted: 189/189 (100.00%), 1945 khash/s (yay!!!)
[2014-05-12 18:05:02] thread 0: 6575933 hashes, 1948 khash/s
[2014-05-12 18:05:02] accepted: 190/190 (100.00%), 1948 khash/s (yay!!!)
[2014-05-12 18:05:10] thread 0: 16190486 hashes, 1951 khash/s
[2014-05-12 18:05:11] accepted: 191/191 (100.00%), 1951 khash/s (yay!!!)
[2014-05-12 18:05:12] thread 0: 3559482 hashes, 1931 khash/s
[2014-05-12 18:05:12] accepted: 192/192 (100.00%), 1931 khash/s (yay!!!)

ASUS GTX750TI-OC-2GD5; OC@+100/0:

[2014-05-12 18:07:26] thread 0: 1676342 hashes, 1788 khash/s
[2014-05-12 18:07:26] accepted: 234/234 (100.00%), 1788 khash/s (yay!!!)
[2014-05-12 18:07:28] thread 0: 3047070 hashes, 1789 khash/s
[2014-05-12 18:07:28] accepted: 235/235 (100.00%), 1789 khash/s (yay!!!)
[2014-05-12 18:07:36] thread 0: 14452160 hashes, 1817 khash/s
[2014-05-12 18:07:36] accepted: 236/236 (100.00%), 1817 khash/s (yay!!!)
[2014-05-12 18:07:36] thread 0: 757350 hashes, 1795 khash/s
[2014-05-12 18:07:36] accepted: 237/237 (100.00%), 1795 khash/s (yay!!!)
[2014-05-12 18:07:38] thread 0: 3479074 hashes, 1810 khash/s
[2014-05-12 18:07:38] accepted: 238/238 (100.00%), 1810 khash/s (yay!!!)

ccminer50 -s 1 -a x11 -o pool:port -u wallet_address -p x

In Windows 8.1_64 I got 5-10% lower results with same settings!!
Didn't test Win7 or Linux.

Can you please post your clocks from gpuz? I can't get more than 1400 per card :/

[opus.224]

Can you please post your clocks from gpuz? I can't get more than 1400 per card :/

PALIT:


ASUS:

[Bombadil]

Any help here would be appreciated...

It seems to be working, but whichever pool I connect to, my workers show as inactive.



I am on a GeForce GT 530 and I have just installed the latest drivers.

My GTS450 521K is normal
Maybe you can use your software to me, OK?

That just doesn't work, your card doesn't understand that compute capability. I compiled a ccminer for compute capability 2.1 yesterday: https://bitcointalk.org/index.php?topic=167229.msg6676746#msg6676746
Beware: Future CCMiners will probably not work at all anymore. Future development will drop cc2.1 completely in favor of 3.0, 3.5 & 5.0.

Message me if you want to try a compilation for ccminer2.0 (very old cards, probably not worth it though). I just get weird HTTP errors with them, but maybe someone else has more luck.

[Andre345678]

Any help here would be appreciated...

It seems to be working, but whichever pool I connect to, my workers show as inactive.

"image"

I am on a GeForce GT 530 and I have just installed the latest drivers.

My GTS450 521K is normal
Maybe you can use your software to me, OK?

That just doesn't work, your card doesn't understand that compute capability. I compiled a ccminer for compute capability 2.1 yesterday: https://bitcointalk.org/index.php?topic=167229.msg6676746#msg6676746
Beware: Future CCMiners will probably not work at all anymore. Future development will drop cc2.1 completely in favor of 3.0, 3.5 & 5.0.

Message me if you want to try a compilation for ccminer2.0 (very old cards, probably not worth it though). I just get weird HTTP errors with them, but maybe someone else has more luck.

stratum servers is not normal HTTP command line right ?, might work better on stratum

[liomojo1]

Guys suggest an x11 coin , i don`t see a good one or maybe i am not looking right?

[7854587]

Any help here would be appreciated...

It seems to be working, but whichever pool I connect to, my workers show as inactive.

"image"

I am on a GeForce GT 530 and I have just installed the latest drivers.

My GTS450 521K is normal
Maybe you can use your software to me, OK?

That just doesn't work, your card doesn't understand that compute capability. I compiled a ccminer for compute capability 2.1 yesterday: https://bitcointalk.org/index.php?topic=167229.msg6676746#msg6676746
Beware: Future CCMiners will probably not work at all anymore. Future development will drop cc2.1 completely in favor of 3.0, 3.5 & 5.0.

Message me if you want to try a compilation for ccminer2.0 (very old cards, probably not worth it though). I just get weird HTTP errors with them, but maybe someone else has more luck.

stratum servers is not normal HTTP command line right ?, might work better on stratum

The ccminer is not 1.0?