[ANN] cudaMiner & ccMiner CUDA based mining applications [Windows/Linux/MacOSX]

[djm34]

djm do you want me to see how long it takes to compile on my windows system in case it was your pc doing it slow?
I wont release it as i have no interest in it but i am willing to check it for you

ok, I will send you a link (but that will be the version corresponding to the binaries... the other is finished yet... was eating...)

after the neverending compilation, the 11k/s upload... 

[bigjme]

Yeh sure, just send me a message when your ready

[restless]

it works   (good luck compiling though...)
(in my first attemp the two uint32 wasn't in the right order...)

gpu usage stable around 78 (not good but better than yesterday)
speed: 2.9Mhash/s (2 instance gives between 3-3.2MHash/s) with the killer groestl version.

on 750Ti ?!
Realased version makes ~ 1100 on Palit OC version :O

[djm34]

it works  (good luck compiling though...)
(in my first attemp the two uint32 wasn't in the right order...)

gpu usage stable around 78 (not good but better than yesterday)
speed: 2.9Mhash/s (2 instance gives between 3-3.2MHash/s) with the killer groestl version.

on 750Ti ?!
Realased version makes ~ 1100 on Palit OC version :O

that's about what I get, it is may-be possible to get a little more by running 2 instances at the same time

[Mantiska]

djm34, can you compile your x15 miner for compute3.0?

[djm34]

djm34, can you compile your x15 miner for compute3.0?

This is from the latest release, where only executable is necessary

[djm34]

.... compiling ..... (last compilation before I send to github, then there will be another compilation to make sure it compiles directly from github)  

Is it possible to change the register value ? It is compiled with 78 registers (from what I saw from the last compilation) what kind of values are allowed
? (max reg 80 in compiler setting)

[tc61]

is x13 build into the latest 1.2 or do you need the x13 specific miner
Posted from Bitcointa.lk - #OIUs1kdjFBOvZwoV

[djm34]

is x13 build into the latest 1.2 or do you need the x13 specific miner
Posted from Bitcointa.lk - #OIUs1kdjFBOvZwoV

it is built into the latest release

[djm34]

for those who think x15 isn't enough: https://bitcointalk.org/index.php?topic=663221.0 (and I am afraid it isn't a joke)

[djm34]

ok, I have released the source of the x15 ccminer.

It can be found here: https://github.com/djm34/ccminer
compilation on windows takes forever (sorry for that).
It should compile on linux (I fixed the Makefile.am), if anything is missing let me know...

To run x15 "ccminer -a x15"
as previously said, it is far from perfect (gpu usage rather low around 80%, so there are room for optimisation... and exceptionally the 780ti runs at 74°C).
I get at the moment (started on the previous compilation):

1467MHash/s for the 750ti
2900MHash/s for the 780ti (on supernova...)

[ltcnim]

ok, I have released the source of the x15 ccminer.

It can be found here: https://github.com/djm34/ccminer
compilation on windows takes forever (sorry for that).
It should compile on linux (I fixed the Makefile.am), if anything is missing let me know...

To run x15 "ccminer -a x15"
as previously said, it is far from perfect (gpu usage rather low around 80%, so there are room for optimisation... and exceptionally the 780ti runs at 74°C).
I get at the moment (started on the previous compilation):

1467MHash/s for the 750ti
2900MHash/s for the 780ti (on supernova...)

which repository did you use as base? the official one, or the one from tsiv with cryptonight? anyway, thanks for you work, I'll test it when I have time (if it compiles on my ubuntu os ^^)

[djm34]

ok, I have released the source of the x15 ccminer.

It can be found here: https://github.com/djm34/ccminer
compilation on windows takes forever (sorry for that).
It should compile on linux (I fixed the Makefile.am), if anything is missing let me know...

To run x15 "ccminer -a x15"
as previously said, it is far from perfect (gpu usage rather low around 80%, so there are room for optimisation... and exceptionally the 780ti runs at 74°C).
I get at the moment (started on the previous compilation):

1467MHash/s for the 750ti
2900MHash/s for the 780ti (on supernova...)

which repository did you use as base? the official one, or the one from tsiv with cryptonight? anyway, thanks for you work, I'll test it when I have time (if it compiles on my ubuntu os ^^)

It is forked from the official one

something strange I just noticed, the gpu usage of the 750ti is around 99% (while only the 780ti sucks with gpu usage stuck around 80%)
 

[yellowduck2]

profit calculator block reward are showing incorrect value for talkcoin and JPC.

[tc61]

that profit calculator is sketchy at best..call out one coin as good then you move to that coin and come back and it no where near the same report as a last time
Posted from Bitcointa.lk - #r327nMMo5XkF7uj8

[cryptomines]

ok, I have released the source of the x15 ccminer.

It can be found here: https://github.com/djm34/ccminer
compilation on windows takes forever (sorry for that).
It should compile on linux (I fixed the Makefile.am), if anything is missing let me know...

To run x15 "ccminer -a x15"
as previously said, it is far from perfect (gpu usage rather low around 80%, so there are room for optimisation... and exceptionally the 780ti runs at 74°C).
I get at the moment (started on the previous compilation):

1467MHash/s for the 750ti
2900MHash/s for the 780ti (on supernova...)

Compiling now...... Then on to testing. Thank you very much for your efforts, and for sharing!!

do you have an x15 donation addresss?

[djm34]

ok, I have released the source of the x15 ccminer.

It can be found here: https://github.com/djm34/ccminer
compilation on windows takes forever (sorry for that).
It should compile on linux (I fixed the Makefile.am), if anything is missing let me know...

To run x15 "ccminer -a x15"
as previously said, it is far from perfect (gpu usage rather low around 80%, so there are room for optimisation... and exceptionally the 780ti runs at 74°C).
I get at the moment (started on the previous compilation):

1467MHash/s for the 750ti
2900MHash/s for the 780ti (on supernova...)

Compiling now...... Then on to testing. Thank you very much for your efforts, and for sharing!!

do you have an x15 donation addresss?

the compilation may take a while... (having another occupation while it compiles, might be useful... bigjme told me it took him 2hours...)
You can donate at this address: XxqspiA4zCyC4QUJCaEgQzs89DbpgRNQbe
Thanks.

[TillKoeln]

i think coumpute2.0 isnt suported to use x15 right ?

[Grinnz]

i think coumpute2.0 isnt suported to use x15 right ?

The groestl updates to x11/x13 don't work on compute 2.0 so x15 will have the same issue.

[TillKoeln]

:-(

seems that i have to Switch to 750ti ...

anyone interested in a gtx560ti 448 ?